On-line high-performance liquid chromatography–ultraviolet–nuclear magnetic resonance method of the markers of nerve agents for verification of the Chemical Weapons Convention

This paper details an on-flow liquid chromatography–ultraviolet–nuclear magnetic resonance (LC–UV–NMR) method for the retrospective detection and identification of alkyl alkylphosphonic acids (AAPAs) and alkylphosphonic acids (APAs), the markers of the toxic nerve agents for verification of the Chemical Weapons Convention (CWC). Initially, the LC–UV–NMR parameters were optimized for benzyl derivatives of the APAs and AAPAs. The optimized parameters include stationary phase C₁₈, mobile phase methanol:water 78:22 (v/v), UV detection at 268 nm and ¹H NMR acquisition conditions. The protocol described herein allowed the detection of analytes through acquisition of high quality NMR spectra from the aqueous solution of the APAs and AAPAs with high concentrations of interfering background chemicals which have been removed by preceding sample preparation. The reported standard deviation for the quantification is related to the UV detector which showed relative standard deviations (RSDs) for quantification within ±1.1%, while lower limit of detection upto 16 μg (in μg absolute) for the NMR detector. Finally the developed LC–UV–NMR method was applied to identify the APAs and AAPAs in real water samples, consequent to solid phase extraction and derivatization. The method is fast (total experiment time ∼2 h), sensitive, rugged and efficient.     

Application of Doehlert design in optimizing the determination of degraded products of nerve agents by ion-pair liquid chromatography electrospray ionization tandem mass spectrometry

A qualitative method was developed for the determination of degraded products of nerve agents by using ion-pair liquid chromatography electrospray ionization tandem mass spectrometry (IP-LC-ESI-MS(n)). Generally, alkylphosphonic acids (APAs) and O-alkyl alkylphosphonic acids (AAPAs) give deprotonated molecular ion [M-H](-) in negative mode. Interestingly, first time we obtained the molecular radical anion [M](.-) of phosphonic acids in negative mode by using tri-n-butyl amine as an ion-pairing agent. We interpreted this observation as an indication of electrochemical reduction of phosphonic acids in electrospray needle. Three variables such as sheath gas flow, electrospray needle voltage and pH of the mobile phase were investigated to enhance the molecular radical anion [M](.-) signal of each analyte. The Doehlert design was used to obtain the region in which the optimum value of such variables is simultaneously achieved. Limit of detection achieved was 0.5 microg mL(-1) for AAPAs and 10 microg mL(-1) for APAs. Excellent precision was observed with less than 8.61% RSD. Finally, the method was applied for the detection of ethyl methylphosphonic in aqueous extract of soil sample.     

Determination of alkyl alkylphosphonic acids by liquid chromatography coupled with electrospray ionization tandem mass spectrometry using a dicationic reagent

A new analytical method based on liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI‐MS/MS) is proposed and validated for the identification and quantification of alkyl alkylphosphonic acids (AAPAs) in aqueous matrices. Retrospective detection and identification of degradation products of chemical warfare agents is important as an indicator of possible use of chemical warfare agents or of environmental contamination. A commercially available solution of 1,9‐nonanediyl‐bis‐(3‐methylimidazolium)bisfluoride (NBMI) allowed detection of AAPAs by positive mode electrospray ionization mass spectrometry by forming an adduct with AAPAs. MS/MS experiments using an ion trap analyzer were carried out for unambiguous identification of AAPAs. Different parameters were optimized in order to obtain both an adequate chromatographic separation and a high sensitivity using experimental design methodology. Quantification was done with matrix‐matched calibration standards of AAPAs. The method was validated in terms of linearity (r² >0.982), intra‐ and inter‐day precisions (RSD below 15%), and robustness. The method is sensitive enough for the determination of AAPAs in aqueous matrices, with limits of detection in the 1–5 ng mL^–1 range and limits of quantification in the 5–20 ng mL^–1 range. Finally, the method was successfully applied to determine these AAPAs in aqueous samples provided by the Organization for the Prohibition of Chemical Weapons during 26^th and 29^th official proficiency tests. The added advantage of this method is identification of low mass range analyte at high mass range, which obviates the background noise at low mass range. Copyright © 2012 John Wiley & Sons, Ltd.     

Detection and identification of alkylphosphonic acids by positive electrospray ionization tandem mass spectrometry using a tricationic reagent

The retrospective detection and identification of degradation products of chemical warfare agents are of immense importance in order to prove their spillage and use. A highly sensitive liquid chromatography/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method--using an imidazolium-based tricationic reagent--was developed for the detection and identification of the anionic degradation products of nerve agents. A commercially available solution of 1,3-imidazolium-bis-(1-hexylbenzylimidazolium) trifluoride (IBHBI) formed adducts with alkylphosphonic acids (APAs), allowing detection of the APAs by positive mode ESI-MS. Tandem mass spectrometry was used for the unambiguous identification of the APAs. Parameters influencing the formation and stability of these adduct during mass spectrometric analysis, such as solvent composition, concentration of IBHBI, effect of pH and interferences by salts, were optimized. The absolute limits of detection (0.1 ng) for achieved for the APAs were better than those previously reported, and linear dynamic ranges of 10-2000 ng mL(-1) were achieved. The method was repeatable with a relative standard deviation ≤7.3%. APAs present in aqueous samples provided by the Organization for the Prohibition of Chemical Weapons during the 22(nd) and 24(th) Official Proficiency tests were detected and identified as IBHBI adducts. The added advantage of this method is that low-mass analytes are detected at higher mass, thus obviating the problem with background noise at low mass.     

Evaluation of the effects of various gas chromatographic parameters on haloacetic acids disinfection by-products analysis

Thermal decomposition of the analytes during the analysis is a problem for haloacetic acids (HAAs). We evaluated the effect of GC injection port temperature and the amount of trace water in the sample on the HAAs' analysis. For three brominated HAAs, the variation in intensity due to the change of injection port temperature was significant. The largest variation observed was tribromoacetic acid methyl ester (from 3.2 to 1 for injection port temperature changing from 170 degrees C to 250 degrees C). Tribromoacetic acid methyl ester partially decomposed to dibromoacetic acid and to tribromomethane in a competitive way. At a low injection port temperature, tribromomethane formation was preferred, but at a high injection port temperature, the debrominated methyl ester formation dominated. Water contained in the sample may accelerate the hydrolysis process of the esters in the injection port, and this effect was also the greatest for the brominated trihaloacetic acids. Direct injection of underivatized HAAs into the GC/MS indicated that brominated HAAs can be nearly quantitatively thermal decomposed to the corresponding halomethanes.     

Liquid–liquid–liquid microextraction of degradation products of nerve agents followed by liquid chromatography–tandem mass spectrometry

Alkyl alkylphosphonic acids (AAPAs) are important environmental markers of nerve agents. A simple hollow fiber-based liquid–liquid–liquid microextraction (HFLLLME) technique has been developed to enrich the AAPAs from water. AAPAs were extracted from acidified aqueous phase to organic phase present in pores of the hollow fiber, and then back extracted into the alkaline acceptor phase present in the lumen of the hollow fiber. Variables affecting the HFLLLME process were optimized using a Plackett–Burman design and a Doehlert design. Optimal experimental conditions were: organic solvent, 1-octanol; pH of acceptor phase, 14; extraction time, 60 min; pH of donor phase, 1; and NaCl concentration, 10% (w/v). Depending upon the alkyl substituent, lower limits of detection varied from 0.1 to 100 ng mL⁻¹ (S/N ≥ 5). Repeatability of the method was observed with relative standard deviation of 1.49–9.83% (n = 3). After validation, the method was applied to detect AAPAs present in the water sample provided by the Organization for Prohibition of Chemical Weapons (OPCW) during the 23rd official proficiency test. The added advantage of this method is that several successive extractions of AAPAs from the same water sample can be performed.     

Sensitive determination of n-hexane and cyclohexane in human body fluids by capillary gas chromatography with cryogenic oven trapping

A sensitive method was developed for determination of n-hexane and cyclohexane in human body fluids by headspace capillary gas chromatography (GC) with cryogenic oven trapping. Whole blood and urine samples containing n-hexane and cyclohexane were heated in a 7.5 mL vial at 70 degrees C for 15 min, and 5 mL of the headspace vapor was drawn into a glass syringe. All vapor was introduced through an injection port of a GC instrument in the splitless mode into an Rtx-Volatiles middle-bore capillary column at an oven temperature of -40 degrees C for trapping volatile compounds. The oven temperature was programmed to 180 degrees C for GC with flame ionization detection. These conditions gave sharp peaks for both n-hexane and cyclohexane, a good separation of each peak, and low background impurities for whole blood and urine. The extraction efficiencies of n-hexane and cyclohexane were 13.2-30.3% for whole blood and 12.7-20.7% for urine. The coefficients of within-day variation in terms of extraction efficiency of both compounds were 5.0-9.5% for whole blood and 3.8-10.8% for urine; those of day-to-day variation for the compounds were not greater than 16.6%. The regression equations for n-hexane and cyclohexane showed good linearity in the range of 5-500 ng/0.5 mL for whole blood and urine. The detection limits (signal-to-noise ratio = 3) for both compounds were 1.2 and 0.5 ng/0.5 mL for whole blood and urine, respectively. The data on n-hexane or cyclohexane in rat blood after inhalation of each compound are also presented.     

Field-amplified sample stacking for the detection of chemical warfare agent degradation products in low-conductivity matrices by capillary electrophoresis-mass spectrometry

Preconcentration of chemical warfare agent degradation products (alkylphosphonic acids and alkyl alkylphosphonic acids) in low-conductivity matrices (purified water, tap water and local river water) by field-amplified sample stacking (FASS) was developed for capillary electrophoresis (CE) coupled to ion trap mass spectrometry. FASS was performed by adding a mixture of HCOONH(4) and NH(4)OH in appropriate concentrations to the sample. This allowed to control the conductivity and the pH of the sample in order to obtain FASS performances that are independent of analyte concentration. The influence of different parameters on FASS (sample to background electrolyte (BGE) conductivity ratio, injection volume and concentration of BGE) was studied to determine the optimal conditions and was rationalized by using the theoretical model developed by Burgi and Chien. A good correlation was obtained between the bulk electroosmotic velocity predicted by this model and the experimental value deduced from the migration time of the electroosmotic flow marker detected by mass spectrometry (MS). This newly developed method was successfully applied to the analysis of tap water and local river water fortified with the analytes and provided a 10-fold sensitivity enhancement in comparison to the signal obtained without preconcentration procedure. The quite satisfactory repeatability and linearity for peak areas obtained in the 0.5-5 microg mL(-1) concentration range allow quantitative analysis to be implemented. Limits of detection of 0.25-0.5 microg mL(-1) for the alkyl alkylphosphonic acids and of 0.35-5 microg mL(-1) for the alkylphosphonic acids were reached in tap water and river water.     

In situ derivatization hollow fiber mediated liquid phase microextraction of alkylphosphonic acids from water

Alkylphosphonic acids (APAs), particularly the methyl-, ethyl-, isopropyl- and n-propyl-phosphonic acids are important markers of extremely toxic nerve agents. Hence, their detection and identification is of vital importance to verification of chemical weapons convention (CWC). Verification analysis of CWC requires development of fast, reliable, simple and reproducible sample preparation methods of water and soil samples. Present investigation is focused on the optimization of alkylation of APAs in water with subsequent extraction of alkylated acids by hollow fiber liquid phase microextraction (HF-LPME). This simple and sensitive sample preparation of APAs from water offered better recoveries in comparison to conventionally used extraction technique. Under optimized conditions, the APAs were detected at the concentration of 0.5-0.75 microg/mL with S/N ratio > or = 5, whereas the LODs for alkyl APAs (monobasic APAs) were achieved up to 0.1 microg/mL. The developed method was finally tested with water samples supplied in 19th official proficiency test conducted by the OPCW.     

Selective enrichment of the degradation products of organophosphorus nerve agents by zirconia based solid-phase extraction

Selective extraction and enrichment of nerve agent degradation products has been achieved using zirconia based commercial solid-phase extraction cartridges. Target analytes were O-alkyl alkylphosphonic acids and alkylphosphonic acids, the environmental markers of nerve agents such as sarin, soman and VX. Critical extraction parameters such as modifier concentration, nature and volume of washing and eluting solvents were investigated. Amongst other anionic compounds, selectivity in extraction was observed for organophosphorus compounds. Recoveries of analytes were determined by GC-MS which ranged from 80% to 115%. Comparison of zirconia based solid-phase extraction method with anion-exchange solid-phase extraction revealed its selectivity towards phosphonic acids. The limits of detection (LOD) and limit of quantification (LOQ) with selected analytes were achieved down to 4.3 and 8.5 ng mL(-1), respectively, in selected ion monitoring mode.     

Sensitive analysis of alkyl alcohols as decomposition products of alkyl nitrites in human whole blood and urine by headspace capillary GC with cryogenic oven trapping

The abuse of alkyl nitrites is becoming a serious social problem worldwide. In this report, a simple and sensitive method is presented for the determination of n-butyl alcohol, isobutyl alcohol, and isoamyl alcohol as decomposition products of alkyl nitrites in human whole blood and urine samples using capillary gas chromatography (GC) with cryogenic oven trapping. After heating a whole blood or urine sample containing each alkyl alcohol and t-butyl alcohol [the internal standard (IS)] in a 7-mL vial at 55 degrees C for 15 min, 5 mL of the headspace vapor is drawn into a gas-tight syringe and injected into a GC inlet port. The vapor is introduced into an Rtx-BAC2 medium-bore capillary column in the splitless mode at 0 degrees C oven temperature in order to trap the entire analytes, and then the oven temperature is programmed up to 240 degrees C for the GC measurements by flame ionization detection. These conditions give sharp peaks for each compound and the IS and low background noise for whole blood or urine samples. The detection limits of the analytes are 10 ng/mL for whole blood and 5 ng/mL for urine. Linearity and precision are also tested to confirm the reliability of this method. Isobutyl alcohol and methemoglobin could be determined from the whole blood samples of three male volunteers who had sniffed isobutyl nitrite.     

Determination of pentafluorobenzyl derivatives of phosphonic and phosphonothioic acids by gas chromatography-mass spectrometry

A method based on gas chromatography-mass spectrometry (GC/MS) has been evaluated and standardized for the analysis of pentafluorobenzyl (PFB) derivatives of alkylphosphonic, O-alkyl alkylphosphonic and phosphonothioic acids. The pentafluorobenzyl (PFB) derivatives are much more stable as compared to the conventionally used trimethylsilyl derivatives. The conditions for the derivatization and analysis have been optimized to achieve the best detection limits in negative chemical ionization (NCI) mode.     

Critical aspects of the determination of pentafluorobenzyl derivatives of aldehydes by gas chromatography with electron-capture or mass spectrometric detection: Validation of an optimized strategy for the determination of oxygen-related odor-active aldehydes in wine

This work presents a thorough study of some aspects critical to the quantitative performance of methods for the determination of volatile aldehydes previously derivatized to pentafluorobenzyl hydroxylamine oximes. The conclusions of the study are further applied to the validation of an optimized procedure for the determination of oxidation-related aldehydes from wine. Aspects studied include the chromatographic injection, the analytical performance of electron-capture detection (ECD) or MS detection, and the way in which the derivatization is carried out. Different injection techniques have been optimized and compared (classical splitless-hot injection; cold splitless; and large volume solvent split injection). All of them were carried out in a programmed temperature vaporization (PTV) injector, with a 350 microL internal volume liner (3.4 mm internal diameter). Classical splitless injection of hexane extracts is troublesome and requires large carrier gas flows (>10 mL min(-1)). Cold splitless injection was clearly superior. Large volume solvent split injection has been also optimized. ECD has been found to lack the necessary selectivity for the determination of unsaturated aldehydes in wine, although the quantitation of several minor aldehydes is possible. MS detection has proven to be superior for the determination of these compounds in wine. The way in which the reagent is applied is also critical and for the case of wine is important to ensure that the reagent is applied after some of the major wine aldehydes have been eliminated. The finally proposed method is extremely sensitive. Method detection limits ranged from 0.002 microg L(-1) (for unsaturated aldehydes) to 0.73 microg L(-1) (for phenylacetaldehyde) and precision (measured as relative standard deviation) is < or =6% in all cases. The method makes it possible to determine quantitatively in a single run the wine aldehydes with sensory significance (isobutyraldehyde, 2-methylbutanal, isovaleraldehyde, (E)-2-hexenal, (E)-2-heptenal, (E)-2-octenal, (E)-2-nonenal, methional and phenylacetaldehyde).     

Furan precursors in food: a model study and development of a simple headspace method for determination of furan

Furan was previously detected in foods that had undergone thermal treatment. Because furan is now classified as a possible human carcinogen, a model system was developed to investigate the origins of furan. Also, a simple, rapid isotope dilution (d4-furan) headspace method was developed to measure furan. Two pathways of furan formation have been identified in the model systems tested so far. The first is the oxidation of polyunsaturated fatty acids at elevated temperatures, and the second is linked to the decomposition of ascorbic acid derivatives. The analytical procedure, based on the use of a 50 microL injection (from the headspace of a 1.5 mL vial containing 0.5 mL water) into the split/splitless injection port of a gas chromatograph/mass spectrometer (electron ionization, selected-ion monitoring), showed linearity in the 10-1000 ng/g range with a limit of detection of 1 ng/g.     

GC Analysis of Organic Acids and Phenols Using On-Line Methylation with Trimethylsulfonium Hydroxide and PTV Solvent Split Large Volume Injection

The combination of on-line methylation using trimethylsulfonium hydroxide with large volume injection of 100 μL was evaluated for the analysis of organic acids and phenols in water. Solvent split injection was applied with complete evaporation of the solvent before analytes were transferred onto the GC column. Despite complete solvent removal, losses were very low compared to conventional splitless injection even for volatile acidic compounds such as propionic acid and phenol. This is explained by intermediate formation of low volatility trimethylsulfonium salts of the analytes which were held in the injector for long evaporation times of up to 10 min, if the evaporation temperature was as low as 10°C. Using a simple liquid/liquid extraction procedure, volatile fatty acids, dicarboxylic acids, benzoic acids and phenols could be detected in 5 mL of water at concentrations of 0.04–0.1 μmol/L with GC/MS in full scan mode. Lactic, pyruvic, and also malonic acids could only be detected at higher levels because of their limited extractability from water as well as their poorer methylation yields. The method provides an easy way to sensitively detect acidic compounds of medium to high volatility in water. It was applied for screening of organic acids and phenols in batch cultures of anaerobic bacteria of which one example is shown.     

Use of an injection port for thermochemolysis–gas chromatography/mass spectrometry: Rapid profiling of biomaterials

A simple and direct approach was developed for thermochemolytic analysis of a wide range of biomolecules present in plant materials using an injection port of a gas chromatograph/mass spectrometer (GC/MS) and a novel solids injector consisting of a coiled stainless steel wire placed inside a modified needle syringe. Optimum thermochemolysis (or Thermally Assisted Hydrolysis/Methylation) was achieved by using a suitable methanolic solution of trimethylsulfonium hydroxide (TMSH) or tetramethylammonium hydroxide (TMAH) with an injection port temperature of 350 °C. Intact, methylated flavonoids, saccharides, phenolic and fatty acids, lignin dimers and diterpene resin acids were identified. Samples include tea leaves, hemicelluloses, lignin isolates and herbal medicines. Unexpected chromatographic results using TMAH reagent revealed the presence of intact methylated trisaccharides (658 Da) and structurally informative dimer lignin markers.     

Separation and identification of isomeric acidic degradation products of organophosphorus chemical warfare agents by capillary electrophoresis-ion trap mass spectrometry

Capillary electrophoresis (CE) coupled to ion trap mass spectrometry (MS) was evaluated for the separation and identification of chemical warfare agent degradation products (alkylphosphonic acids and alkyl alkylphosphonic acids). Different analytical parameters were optimized in negative ionization mode such as electrolyte composition (15 mM CH(3)COONH(4), pH 8.8), sheath liquid composition (MeOH/H(2)O/NH(3), 75:25:2, v/v/v), nebulization and ion trapping conditions. A standard mixture of five alkylphosphonic (di)acids and five alkyl alkylphosphonic (mono)acids containing isomeric compounds was used in order to evaluate CE selectivity and MS identification capability. The obtained electropherograms revealed that CE selectivity was very limited in the case of alkyl alkylphosphonic acid positional isomers, whereas isomeric isopropylphosphonic and propylphosphonic acids were baseline-separated. CE-MS-MS experiments provided an unambiguous identification of each isomeric co-migrating alkyl alkylphosphonic acids thanks to the presence of specific fragment ions. On the other hand, CE separation was mandatory for the identification of isomeric alkylphosphonic acids, which led to the same fragment ion and could not be differentiated by MS-MS. The developed method was applied to the analysis of soil extracts spiked with the analytes (before or after extraction treatment) and appeared to be very promising since resolution and sensitivity were similar to those observed in deionized water. Especially, analytes were detected and identified in soil extract spiked at 5 microg mL(-1) with each compound before extraction treatment.     

Determination of pesticides in composite dietary samples by gas chromatography/mass spectrometry in the selected ion monitoring mode by using a temperature-programmable large volume injector with preseparation column.

Use of a temperature-programmable preseparation column in the gas chromatographic (GC) injection port permits determination of a wide range of semi-volatile pesticides including organochlorines, organophosphates, triazines, and anilines in fatty composite dietary samples while reducing sample preparation time and solvent consumption. Dietary samples are mixed with diatomaceous earth and are Soxhlet-extracted with an azeotropic solution of hexane and acetone. Sample preparation uses liquid-liquid partitioning over diatomaceous earth followed by normal phase chromatography over partially deactivated alumina. The final cleanup step occurs in a preseparation column in the GC injector, which is able to perform splitless transfer of the analytes to the analytical column and purge 99% of the high molecular weight residue. Detection is performed by GC/mass spectrometry (MS) in the selected ion monitoring mode. Method detection limits were at or below 2 ng/g for 24 of 35 pesticides studied, with recovery between 70 and 125% for 27 pesticides in samples fortified at 10 ng/g. Recovery was not dependent on fat content when measured in laboratory fortified samples containing 1, 5, and 10% fat by weight. Precision over multiple injections was acceptable, with a relative standard deviation of 2.6-15% for 25 analytes.     

大体积进样技术在气相色谱-质谱法测定 二英类化合物中的应用

利用大体积进样技术(large volume injection,LVI),结合气相色谱-质谱方法对二英的测定效果进行了研究。同时与传统分流/不分流进样技术进行了对比。对进样体积为1,5,10,25,50和100 μL的色谱图进行了分析。研究表明使用大体积进样方式,在不影响色谱分离度的同时,大幅度提高了分析灵敏度。通过对土壤样品的检测,证明该方法可以用于环境样品的实际测定。     

Analysis of methyl tert.-butyl ether and its degradation products by direct aqueous injection onto gas chromatography with mass spectrometry or flame ionization detection systems.

A method was developed to analyze methyl tert.-butyl ether (MTBE) and its degradation products by gas chromatography with mass spectrometry (GC-MS) or flame ionization detection (FID) with direct aqueous injection. The column had dimensions of 30 m x 0.25 mm with film thickness 0.25 microm and a stationary phase of FFAP (nitroterephthalic acid-modified polyethylene glycol). The optimized GC conditions for non-acid components were as follows: carrier gas flow-rate,l mL/min; oven temperature, 35 degrees C for 5.5 min, ramped to 90 degrees C at 25 degrees C/min, then ramped to 200 degrees C at 40 degrees C/min and held at 200 degrees C for 8 min. The conditions for the acid components were: carrier gas flow-rate, 1 mL/min; oven temperature, 110 degrees C for 2 min, ramped to 150 degrees C at 10 degrees C/min, then ramped to 200 degrees C at 40 degrees C/min. The injection port contained a silanized-glass reverse-cup liner filled with Carbofrit. The minimum concentrations for the linear range for the selective ion monitoring mode were 30 to 100 microg/L, depending on the analytes. The minimum detection limit was 1 mg/L for MTBE and tert.-butanol when using FID. More components could be analyzed with the FFAP-type column than with the cyanopropylphenyl-dimethyl polysiloxane-type column.