Surface study of hexagonal boron nitride powder by diffuse reflectance Fourier transform infrared spectroscopy

The surface chemistry of hexagonal boron nitride powder is examined. Surface functional groups are found to consist of a mixture of primary and secondary amine groups as well as hydroxyl groups. The surface has a net basic character indicating that the amine contribution to the overall surface chemistry is greater than that of the acidic hydroxyl contribution. A chemical surface treatment also is performed to modify the surface chemistry of hexagonal boron nitride powder. Copyright © 2005 John Wiley & Sons, Ltd.     

Optimization of some instrumental factors in diffuse reflectance infrared Fourier transform spectroscopy

The effects of some instrumental factors on infrared spectroscopy analysis were investigated in the case of diffuse reflectance infrared Fourier transform (DRIFT) mode. It is usually said that quantitative analysis is possible only if both particle size distribution and sample density are perfectly controlled. However, even if these conditions are checked, instrumental factors are of great interest for the goodness of a curve fitting procedure, which is often necessary in solid sample studies. A factorial design achieved on anthron made it possible to obtain major trends concerning the required values for one instrumental parameter (resolution) and two mathematical treatments (zero filling and Savitsky-Golay (S-G) smoothing). Resolution was found to have the greatest effect on measured responses. A value of 2 cm(-1) according to the corresponding aperture is sufficient to approach the real width of bands for powdered samples. The use of a zero filling factor (ZFF) improves the apparent resolution by data interpolation. The best values found for instrumental parameters were applied to an anthron-anthracen mixture. The optimization of spectral features made it possible to obtain semi-quantitative results quite easily, in good agreement with the data corresponding to each pure compound.     

Far infrared fourier transform spectroscopy of semiconductors

Fourier transform spectroscopy (FTS) is one of the most important tools in the study of shallow level donors and acceptors in semiconductors. When combined with a two-step photothermal ionization process detected photoconductively, FTS allows measurement of optical transitions of donor-bound electrons (and acceptor-bound holes) in ultra-pure germanium samples with impurity concentrations <10⁹ cm^–3 (i.e. one electrically active impurity in 4×10¹³ host atoms). The experimental high resolution study of the hydrogen-like excited state series of shallow levels has yielded as many as 19 lines of width as small as 10eV for some centers. These results have stimulated theoretical work which has led to the unambiguous assignment of quantum states to many bound excited states. Extensive studies of ultra-pure Ge crystals grown under different well-controlled conditions have led to the discovery of a large number of novel shallow impurity complexes. Study of the multiplicities and symmetries of the associated electronic states has led to a detailed understanding of the unusual static and dynamic structures of these novel centers. The chemical composition has been deduced from correlations between the concentration of a particular center and the materials involved in crystal gowth. Isotopic substitution of hydrogen with deuterium has led to the unambiguous proof of the presence of hydrogen in several of the novel centers. In addition to the high resolution spectra of shallow electronic levels, vibrational spectra of bond-centered interstitial oxygen in ultra-pure Ge are noteworthy for their extraordinarily sharp lines.     

A modified diffuse reflectance infrared Fourier transform spectroscopy cell for depth profiling of ceramic fibers

A modified diffused reflectance infrared Fourier transformed spectroscopy (DRIFTS) accessory was used to analyze the surface properties of alumino-silicate fibers. The modifications are simple and involve a different way of performing depth-profiling from traditional DRIFTS by removing approximately 2 mm of salt from a full cup prior to placing the sample in for depth profiling. This method proved successful in elucidating the effects of quenching alumino-silicate fibers in mineral oil versus quenching in an air stream.     

Diffuse reflectance fourier transform infrared spectroscopic study of the thermal degradation of barley protein

Diffuse reflectance infrared spectroscopy was used to study isothermal degradation of crude barley protein, that was obtained as a side product of alcohol production. The isothermal temperatures used were in the range 50–150° C. Before analysis the protein fraction was dried either by lyophilization or spray drying. The drying method did not have a major effect on the subsequent isothermal degradation of the material. The main reactions observed in the spectra were oxidation indicated by the appearance of a broad composite carbonyl band and degradation of both proteins and starch. The reactions were visible already in the spectra taken at 70° C and there rates gradually increased as the temperature was raised to 150° C.     

Surface enhancement effect on the diffuse reflectance infrared Fourier transform spectra of compounds having a pyridine ring

A surface enhancement effect was examined for the diffuse reflectance infrared spectra of structurally related compounds having a pyridine ring when a silver colloidal solution was used as the medium which induced the effect. Filter paper, which was considered to provide a favorable state of aggregation of the silver colloidal particles, was used for the preparation of the samples to be measured. It was proved experimentally that when the molecules were dissolved in the silver colloidal solution and the resulting solution was applied dropwise to filter paper, the spectra measured for the filter paper sample exhibited a surface-enhanced infrared absorption (SEIRA) effect for some samples, but not for other samples. It was speculated that the existence of an electron-donating functional group in the molecule was necessary for the realization of SEIRA in the diffuse reflectance infrared spectra. This speculation was confirmed by experiments involving other types of molecules: l-phenylalanine, m-aminophenol and p-chloroaniline.     

The destruction-free analysis of polymers by fourier transform infrared photoacoustic and fourier transform Raman spectroscopy: A comparison

With the introduction of rapid–scanning Fourier transform infrared (FTIR) and recently Raman (FT–Raman) spectroscopy, vibrational spectroscopy has been launched into a new era of applications in polymer chemistry and physics. Thus, the increase in sensitivity provided by multiple scanning has led to the breakthrough of new, destruction–free sampling techniques, such as photoacoustic and Raman spectroscopy. This paper provides a comparison between data produced by FTIR photoacoustic and FT–Raman analysis of a range of polymers, and structural information available from both techniques is discussed.     

Mechanism of heterogeneous oxidation of carbonyl sulfide on Al2O3: an in situ diffuse reflectance infrared fourier transform spectroscopy investigation

Heterogeneous reaction of carbonyl sulfide (OCS) on the surface of different types of alumina (Al(2)O(3)) at 298 K was investigated in a closed system and a flowed system using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The effects of calcination temperature of the Al(2)O(3) on its catalyzed reactivity were studied. The crystal structure and surface area of the Al(2)O(3) were characterized using X-ray diffraction (XRD) and the Brunauer-Emmett-Teller (BET) method. This paper revealed that adsorbed OCS could be catalytically oxidized on the surface of Al(2)O(3) to form gas-phase CO(2) and surface hydrogen carbonate (HCO(3)(-)) and sulfate (SO(4)(2-)) species at 298 K. The surface hydroxyl (OH) species on the Al(2)O(3) had been found to be the key reactant for the heterogeneous oxidation of OCS. Furthermore, the surface hydrogen thiocarbonate (HSCO(2)(-)) species, an intermediate formed in the reaction of OCS with OH, can be observed on the thermal-treated Al(2)O(3). On the basis of these results, the reaction mechanism of heterogeneous oxidation of OCS on Al(2)O(3) is discussed.     

Diffusion measurements with fourier transform infrared attenuated total reflectance spectroscopy: Water diffusion in polypropylene*

The diffusion of pure liquid water into a commercial polypropylene (PP) film at 278–348 K was studied with Fourier transform infrared attenuated total reflectance spectroscopy. Abnormal diffusion behavior was indicated by a significant deviation between the experimental data and a Fickian diffusion model with the conventional saturated boundary condition applied at the water/PP interface. This deviation was observed at all the temperatures studied. With a modified boundary condition that took into account a mass‐transfer resistance at the water/PP interface, the Fickian model was able to represent the experimental data satisfactorily. The average water diffusion coefficient varied between 1.41 and 7.64 × 10^?9 cm²/s, with an activation energy of diffusion of about 19.3 kJ/mol. The interfacial mass‐transfer resistance was represented by an exponential model with an empirical relaxation parameter. The relaxation parameter β increased as the temperature increased and reached an apparent plateau. The infrared spectrum indicated a positive chemical shift of 18 cm^?1 for the less strongly hydrogen‐bonded component of the broad hydroxyl stretching band with respect to pure liquid water, indicating that hydrogen‐bonding interactions were weakened or broken when water molecules diffused into the PP matrix. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 980–991, 2002     

Near infrared fourier transform Raman spectroscopy of human artery

We report the first near IR FT-Raman spectroscopy of normal diseased human artery. In normal human aorta, two bands at 1669 cm⁻¹ and 1452 cm⁻¹ dominate the spectrum and can be assigned to protein amide I and C-H in-plane bending vibrations, respectively. Weaker bands are also observed between 1250 and 1350 cm⁻¹. Non-calcified atherosclerotic lesions with a large amount of necrotic debris below the tissue surface show a relative increase in the intensity of the 1452 cm⁻¹ band. In atherosclerotic aortas which contain calcified deposits several hundred microns below the tissue surface, a strong 961 cm⁻¹ band is observed due to the symmetric stretch of phosphate groups in the calcified salts. The results show that this method provides the capability to probe biological substituents several hundred microns below the tissue surface.     

Optimization of sample packing in diffuse reflectance infrared spectroscopy

Parameters of sample packing in diffuse reflectance IR Fourier transform spectroscopy (DRIFTS) have been investigated and optimized. One MPa pressure applied for 1 min was found to provide simultaneously at least ±3% reproducibility and appropriate band intensity. It has been also demonstrated that this precision can be obtained if the sample mass is controlled to ±2% and the sample is dry. A simple sample packing accessory was designed and constructed for reproducible sample preparation. Quartz concentration of dust samples has been determined and good agreement has been found with the results of the conventional pellet technique.     

Column switching applied to capillary gas chromatography/fourier transform infrared spectroscopy

A dual oven gas chromatograph incorporating a micro, mechanical switching valve has been interfaced to an FTIR spectrometer. With this system, each oven can be operated with independent temperature control. Complete choice of the columns' type and capacity gives flexibility in the separation prior to spectroscopic evaluation. An application which demonstrates some of the advantages of column switching in GC/FTIR is presented. Minor sample components have been successfully analyzed by heart-cutting the appropriate section of the separation from a high to a low capacity column. In this way, the dynamic range of the technique is effectively increased while an efficient chromatographic inlet to the FTIR is maintained.     

Direct analysis of thin-layer chromatographic spots of narcotics by means of diffuse reflectance Fourier transform infrared spectroscopy

The technique of diffuse reflectance Fourier transform infrared spectrometry (DRIFT) as an in situ detection method was used for the qualitative and quantitative analysis of drugs (heroin, cocaine and codeine) separated by thin layer chromatography.It was found that at a given interferometer throughput and detector sensitivity the quality of the spectrum depends strongly in the type of the chromatographic thin layer used. A detection limit of approx. 2 g was attained on a microcrystalline cellulose thin layer with a dynamically aligned Bio-Rad Digilab FTS 60A/896 type interferometer and room temperature DTGS detector. A reliable qualitative analysis can be made with as little as 10 to 15 g drug per spot.     

Comparison of calibration methods in quantitative diffuse reflectance infrared spectroscopy

Four different calibration methods were used for quantitative analysis of quartz and calcite in atmospheric aerosols by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS): (A) conventional calibration with one measurement on each standard (single calibration); (B) calibration with an internal standard; (C) calibration with parallel (n = 4) measurements on each standard (multiple calibration); (D) multiple calibration followed by reference reflectance correction. The accuracy and the precision of the methods were compared and it was found that by using method D the reliability of the conventional pellet preparation transmission technique can be achieved.     

Characterization of estuarine sediments by near infrared diffuse reflectance spectroscopy

It has been developed a partial least squares near infrared (PLS-NIR) method for the determination of estuarine sediment physicochemical parameters. The method was based on the chemometric treatment of first order derivative reflectance spectra obtained from samples previously lyophilized and sieved through a lower than 63 μm grid. Spectra were scanned from 833 to 2976 nm, averaging 36 scans per spectrum at a resolution of 8 cm⁻¹, using chromatographic glass vials of 9.5 mm internal diameter as measurement cells. Models were built using reference data of 31 samples selected through the use of a hierarchical cluster analysis of NIR spectra of sediments obtained from the Ria de Arousa estuary and prediction parameters were established from a validation set of 50 samples of the same area. pH, redox potential (Eh), carbon (C), nitrogen (N) and hydrogen (H) content together with Sn, Pb, Cd, As, Sb and total Cr and also acid soluble, reducible and oxidable Cr fractions were employed as characteristic parameters of the studied sediments. Standard error of prediction values for C and N content were of the order of 4 and 1.3 mg g⁻¹ for H. Prediction errors for pH and Eh were 0.15 units and 37 mV, respectively, thus indicating the good prediction capabilities of the method. Regarding trace metal concentrations PLS-NIR provided prediction error levels for unknown samples around 20% for Sn, Pb, As and Sb and root mean square errors of prediction around 40% for concentration levels of 400 ng g⁻¹ Cd and 100 μg g⁻¹ Cr. For the different extractable fractions of Cr the residual prediction deviation varied from 1.3 to 1.7 but relative errors found for samples of the validation set were only useful for screening purposes.     

Quantitative investigation of matrices for diffuse reflectance infrared Fourier transform spectrometry

Five materials were investigated for use as diluent matrices for diffuse reflectance infrared Fourier transform (DRIFT) spectrometry of powdered samples. DRIFT spectra of powdered carbazole dispersed in germanium, silicon, diamond, potassium chloride and a chalcogenide glass were compared. Three particle size ranges were investigated for five concentrations of carbazole ranging from 0.1-10%. The effects of particle size and refractive index of the matrix are discussed.     

Attenuated total reflectance fourier transform infrared analysis of fly ash geopolymer gel aging

Structural changes in fly ash geopolymers activated with different sodium hydroxide and silicate concentrations are investigated using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy over a period of 200 days. A strong correlation is found between the concentration of silicate monomer in the activating solution and the position of the main Si-O-T stretching band in the FTIR spectrum, which gives an indication of the relative changes in the gel Si/Al ratio. The FTIR spectra of geopolymer samples with activating solution concentrations of up to 1.2 M SiO2 indicate that an Al-rich gel forms before the final gel composition is reached. The time required for the system to reach a steady gel composition depends on the silicate activating solution concentration and speciation. Geopolymers activated with solutions containing predominantly high-order silicate species rapidly reach a steady gel composition without first forming an Al-rich gel. A minimum silicate monomer concentration of approximately 0.6 M is required to shift the geopolymer synthesis mechanism from hydroxide activation to silicate activation. Silicate speciation in the activating solutions also affects zeolite formation and geopolymer microstructures, with a more homogeneous microstructure and less zeolite formation observed at a higher SiO2 content.     

Diffuse reflectance infrared fourier transform (DRIFT) spectroscopy in the preservation of historical monuments: Studies on salt migration

Analytical methods find increasing use in the preservation of historical monuments. We have investigated the salt migration of lithium carbonate under the influence of water (rain, soil humidity). Diffuse reflectance infrared fourier transform spectroscopy (DRIFT) provides rapid information with less time consumption for sample preparation compared to transmission IR spectroscopy. Quantitative data about lithium migration have been obtained by flame photometry.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Application of fourier transform infrared spectroscopy to the study of semicrystalline polymers: Poly(ethylene terephthalate)

An infrared absorbance subtraction technique has been used to “isolate” bands in the composite spectrum of semicrystalline polymers according to their crystalline or amorphous character. Amorphous and crystalline spectra for annealed, melt-quenched, and solution-cast poly(ethylene terephthalate) have been separated. The spectra of the amorphous component show an increased intensity of bands associated with the trans configuration of oxygen about the C? C bond when the polymer is annealed. This increased “trans” band intensity reflects the increased proportion of trans structures as a result of annealing. The amorphous trans bands are shifted approximately 1–3 cm^?1 from their positions in the crystalline “trans” spectrum. The frequency shift of these bands can be attributed to the differences in chain interactions that exist in the amorphous phase and the crystalline lattice. We have also found that under identical anealing conditions the amorphous phase of the melt-quenched polymer contains an increased intensity of conformational trans bands compared to the sample cast from solution.