扫描近场光学显微镜的光耦合偶极子模型

为了研究扫描近场光学显微镜中探针和粗糙样品表面的耦合相互作用,提出了一种光耦合偶极子模型.在该模型中,探针和样品突起都由光极化偶极子表示,在准静态电磁场近似的情况下样品表面的诱导极化效应由影像偶极子表示,应用偶极子辐射理论可以得到系统的自洽场方程.此模型提供了一种直观分析扫描近场光学显微镜中探针和样品相互作用机理的方法.在此基础上,进一步讨论了金属样品的近场成像特点和其特有的局域光学共振现象.数值结果表明：不同于一般的介质样品,金属样品的近场图像与入射光频率直接相关,改变入射光的频率,获得的样品近场图像的形状和对比度都会发生变化.特别是当入射光频率处于样品极化共振范围内时,金属纳米粒子的极化率会出现光极化共振,这样就可以获得样品粒子的最大有效尺寸,为提高系统的分辨率提供了一条重要途径.     

“禁戒光”近场光学显微镜原理与系统

扫描近场光学显微术是８０年代后期发展起来的一种分辨率超过衍射极限的新型光学显微镜技术。本文介绍了国外最近出现的“禁戒光”近场光学显微镜系统的工作原理及结构。透射式ＳＮＯＭ中部分光沿着光轴向前传播；部分光沿着大于全内反射临界角的方向传播。前者称为允许光；后者称为禁戒光。应用“禁戒光”近场光学显微镜可同时获得三幅图像，即允许光像、禁戒光像和反映样品表面形貌的剪切力图像。禁戒光图像能够提供很好的对比度和分辨率。     

Quantitative spectroscopy of superficial turbid media

We report a novel diffuse optical spectroscopy probe design for determining optical properties of superficial volumes of turbid samples. The fiber-based probe employs a highly scattering layer placed in contact with the sample of interest. This layer diffuses photons from a collimated light source before they enter the sample and provides a basis for describing light transported in superficial media by the diffusion approximation. We compare the performance of this modified two-layer diffusion model with Monte Carlo simulations. A set of experiments that demonstrate the feasibility of this method in turbid tissue phantoms is also presented. Optical properties deduced by this approach are in good agreement with those derived by use of a benchmark method for determining optical properties. The average interrogation depth of the probe design investigated here is estimated to be less than 1 mm.     

光纤传感技术结合紫外光谱快速检验马来酸氯苯那敏片

建立一种光纤传感技术结合紫外-可见吸收光谱快速定性、定量分析药物的方法.将光纤探头浸入待测药物溶液中,氘灯光源发出的光通过光纤传输到探头,由探头感受经溶液吸收的光信号,并再次通过光纤反馈到检测器,最终通过计算机即时显示待测药物的光纤紫外-可见吸收光谱,并利用光谱中最大、最小吸收波长及吸光度与对比图谱比较获得定性、定量信...     

基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像

本文结合近场扫描结构和纳米线-微光纤耦合技术,提出了一种基于硫化镉纳米线/锥形微光纤探针结构的被动近场光学扫描成像系统.该系统采用被动式纳米探针,保留了纳米探针对样品表面反射光的强约束优势.其理论收集效率为4.65‰,相比于传统的金属镀膜近场探针收集效率提高了一个数量级,可有效地提高扫描探针对样品形貌信息的检测能力;而后通过硫化镉纳米线与微光纤之间高效的倏逝场耦合,将检测的光强信号传输到远场进行光电探测,最终实现对目标样品形貌的分析成像,其样品宽度测量误差在7.28%以内.该系统不需要外部激发光路,利用显微镜自身光源进行远场照明,被动扫描探针仅作为样品表面反射光的被动收集系统.本文基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像方案,可有效地降低探针的制备难度和目标光场的检测难度,简化扫描成像的结构,为近场光学扫描显微系统之后的发展提供新的思路.     

基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像

本文结合近场扫描结构和纳米线-微光纤耦合技术,提出了一种基于硫化镉纳米线/锥形微光纤探针结构的被动近场光学扫描成像系统.该系统采用被动式纳米探针,保留了纳米探针对样品表面反射光的强约束优势.其理论收集效率为4.65‰,相比于传统的金属镀膜近场探针收集效率提高了一个数量级,可有效地提高扫描探针对样品形貌信息的检测能力;而后通过硫化镉纳米线与微光纤之间高效的倏逝场耦合,将检测的光强信号传输到远场进行光电探测,最终实现对目标样品形貌的分析成像,其样品宽度测量误差在7.28%以内.该系统不需要外部激发光路,利用显微镜自身光源进行远场照明,被动扫描探针仅作为样品表面反射光的被动收集系统.本文基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像方案,可有效地降低探针的制备难度和目标光场的检测难度,简化扫描成像的结构,为近场光学扫描显微系统之后的发展提供新的思路.     

光学针描法的理论与实验研究

在光纤探针描描使表面轮廓对光产生调的基础上提出了光学针找法的粗糙度测量技术。对光学针描法的理论基础，如表面轮廓原理和光耦合区理论进行限较为深入的分析。对单模光纤探针式轮廓仪的实验系统进行了介绍，最后给出了实验结果和误差分析。     

Probe with new holographic optical element (NHOE)

A new holographic optical probe is presented in this paper. With the help of a new holographic optical element, two beams reflected from different spots of the sample surface are received by the same detector. Based on the principle of self-compensation, the influence of the possible inclination of the sample surface is reduced. NHOE, made by the computer-generated hologram (CGH) technology, combines more optical functions than already developed HOE does. Since the probe only takes several elements, it has the advantages of small size, light weight and low cost. It can be used in the high-precision measurement system.     

Characterization of Particulate Mixtures by In-Line Measurments

The quality of particulate mixtures influences strongly the efficiency of downstream process steps. The design or optimization of mixing processes requires fast and accurate methods for determining mixture quality. This paper describes an optical method for the in-line concentration measurement of the key (tracer) component in particulate mixtures with fiber optical probes. Small fluctuations of tracer concentration equivalent to a low concentration variance represent a high degree of mixing. Monochromatic light penetrates via fiber optical probes into a powder sample. A photometer measures the intensity of the diffuse reflected light. If the tracer differs in colour from the other components of the mixture its concentration can be determined. Three types of fiber optical probes were tested. For calibration two series of mixed samples covering a broad concentration range were prepared, one consisting of white Al(OH)₃ and dark SiC and the other of Al(OH)₃ and a much finer green pigment. The calibration graphs are described by the Kubelka-Munk theory. The influence of changes in particle size on the signals is reduced by choosing a probe with an angled arrangement of the fibers. The sample mass of the probes is estimated to ca. 0.01 g, based on comparison with random mixtures at different tracer concentrations. In-line measurements provide extensive data sets which allow advanced statistical intepretations of mixing processes.     

Image dipole approach and polarization effects in scanning near-field optical microscopy

A coupled-dipole approach is proposed in order to study the coupling between the probe tip and the rough sample in SNOM. In the present model both the optical probe tip and the sample protrusions are represented by polarizable dipole spheres. The induced polarization effects on the sample surface can be replaced by the image dipoles in the circumstance of quasi-static electromagnetic field approximation. Applying the radiation theory of the dipole, we have established a set of self-consistent equations to describe the field distribution at the sites of the probe tip and the sample protrusions. The results are completely the same as those obtained by means of the dyadic electromagnetic propagator formalism and also the derivation procedure is relatively simple. This method permits us to analyze the physical mechanisms of the interaction between the probe tip and the rough surface in SNOM intuitively. Based on this approach, we further discuss the influence of polarization of the incident light on the imaging quality. The calculating result shows that the shape and the contrast of the images of the sample are both sensitive to the field polarization, and the z-polarized mode is proved to give better resolution in SNOM.     

Magnetooptical Kerr effect in the near field of a nanowire supporting surface plasmons

In terms of Green’s functions, a theory is developed describing the resonant magnetooptical Kerr effect in light scattering by a linear probe that is parallel to the surface of a magnet and placed at a subwavelength distance from it. The probe is supposed to be a metal nanowire supporting long-lived surface plasmons and forming the near field of the “probe + image” complex. The resonant interaction between the probe and the sample is taken into account within a self-consistent approximation of multiple-scattering theory, and the magnetooptical interaction is included in the linear approximation in magnetization. The problem of scanning near-field magnetooptical microscopy with a linear probe is solved analytically in the case where the magnetization is parallel to both the magnet surface and the plane of incidence of light (longitudinal magnetooptical Kerr effect). The polarization, spectral, and angular characteristics of scattered light modulated by magnetization are discussed. It is shown that the magnetooptical modulation of the scattered light intensity is significantly enhanced when surface plasmons are resonantly excited in the nanowire.     

Rapid passage signals from a vibrationally excited target molecule: a pump and probe experiment with continuous wave quantum cascade lasers

Two 5 μm continuous wave quantum cascade lasers are used to perform a counterpropagating pump and probe experiment on a low pressure sample of nitric oxide. The strong pump field excites a fundamental rovibrational transition and the weaker probe field is tuned to the corresponding rotationally resolved hot band transition. When both light fields are in resonance, rapid passage is observed in the hot band absorption lineshape arising from a minimally damped and velocity-selected sample of molecules in the v=1 state. The measured rapid passage signals are well described by a two-level model based on the optical Bloch equations.     

Role of the probe quadrupole moment in apertureless near-field optical microscopy

A theory of an apertureless scanning near-field optical microscope is developed that takes into account the quadrupole moment of the probe in forming the near field and the scattered wave in the far-field zone. It is shown that the quadrupole moment can lead to a change in the conditions for the resonant coupling of the probe tip with the sample surface, as well as to the appearance of additional resonances in the frequency dependence of the response of a near-field microscope. The theory developed is found to be in good agreement with known experimental data in the region of resonant tip—sample coupling.     

FABRICATION AND APPLICATION OF NEAR-FIELD OPTICAL FIBRE PROBE

In this paper, the fabrication of a large cone angle near-field optical fibre probe, using the two-step chemical etching method and bent probe, is introduced, and the controlling parameters of the coated Cr－Al film at the probe tip are presented. The scanning electron microscopy images display that the tip diameter of the uncoated large cone angle fibre probe obtained is less than 50nm, the cone angle over 90°, and the diameter of light aperture at the coated probe tip is less than 100nm. The measured results of the optical transmission efficiency for various probe tips show that the uncoated straight optical fibre probe, film-coated straight probe and film-coated bent probe are 3×10^-1, 2×10^-3, and 1×10^-4 times that of the flat fibre probe, respectively. In addition, the force images and near-field optical images of a standard sample are acquired using a large cone angle and film-coated bent probe.     

Continuous nondemolition measurement of the Cs clock transition pseudospin

We demonstrate a weak continuous measurement of the pseudospin associated with the clock transition in a sample of Cs atoms. Our scheme uses an optical probe tuned near the D1 transition to measure the sample birefringence, which depends on the component of the collective pseudospin. At certain probe frequencies the differential light shift of the clock states vanishes, and the measurement is nonperturbing. In dense samples the measurement can be used to squeeze the collective clock pseudospin and has the potential to improve the performance of atomic clocks and interferometers.     

不同类型偶氮材料光致双折射的温度特性研究

在不同温度下,分别测量了掺杂偶氮材料、偶氮聚合物和偶氮液晶聚合物的光致双折射行为,并利用双e指数模型对光致双折射的动力学过程进行了拟合.实验结果表明,偶氮材料的光致双折射源于偶氮分子的光致异构和光致分子取向,光致双折射大小随温度的升高表现出先增大后减小的趋势.在抽运光的作用下,含偶氮材料的光致双折射包含一个由偶氮分子取向引起的快过程和一个由偶氮分子带动大分子取向引起的慢过程.关闭抽运光后,掺杂偶氮材料和偶氮聚合物表现为可逆的弛豫,而偶氮液晶聚合物则展现出长久光存储特性.     

Protein-based molecular contrast optical coherence tomography with phytochrome as the contrast agent

We report the use of phytochrome A (phyA), a plant protein that can reversibly switch between two states with different absorption maxima (at 660 and 730 nm), as a contrast agent for molecular contrast optical coherence tomography (MCOCT). Our MCOCT scheme builds up a difference image revealing the distribution of phyA within a target sample from pairs of consecutive OCT A-scans acquired at a probe wavelength of 750 nm, both with and without additional illumination of the target sample with 660-nm light. We demonstrate molecular imaging with this new MCOCT modality in a target sample containing a mixture of 0.2% Intralipid and 83 microM of phyA.     

照明模式SNOM中样品对近场光场分布的影响

在同时考虑样品的形貌及材料光学参量和入射光偏振模式的情况下,利用基于边界元方法编写的二维矢量电磁场计算程序,对工作在照明模式下的扫描近场光学显微镜（Scanning Near-field Optical Microscope,SNOM）的近场矢量电磁场分布进行了数值计算模拟研究.结果表明,在没有表面形貌特征时,探针的光能量透射率随样品材料的折射率和损耗角的增加而增大,而样品表面光斑尺寸受折射率和损耗角的影响很小;对有形貌特征的探针扫描像研究结果表明,SNOM的分辨率随着样品的折射率和损耗角的增加而提高;对SNOM不同的工作模式的扫描成像信号进行的计算结果表明,恒定间距扫描方式比恒定高度扫描方式对样品表面的细节有较强的分辨能力.     

Theoretical Analyses on the Resolution of Collection Mode Scanning Near-Field Optical Microscopy

Numerical simulations have been carried out in the framework of waveguide theory to model collection mode scanning near-field optical microscopy (SNOM). The theoretical model includes the optical fiber end and describes the metal coated aperture on the probe tip. The developed formalism goes beyond the existing Bethe-Bouwkamp theories for electromagnetic transmission of subwavelength apertures. The finite coating and optical fiber end are now taken into account. The new features enable us to simulate the near-field probes that are widely used in the collection mode SNOM. The emphases of the numerical analyses have been mainly on the resolution mechanism of the microscopy. Influence on the resolution from important parameters of the probe tips, such as the size of the apertures and the probe-sample distance, is extensively studied. The resolution dependence has been analyzed in the light of the near-field coupling efficiency of the probe tip. An optimum tip size has been found which is balanced between the significant signal transmission and the resolution of the device.