Science and technology of perfluorocyclobutyl aryl ether polymers

This article highlights the preparation of perfluorocyclobutyl (PFCB) aryl ether polymers for a multitude of commercial technologies that are of academic and commercial global interest. In this account, the synthesis of various aryl trifluorovinyl ether (TFVE) monomers tailored for specific applications is discussed. The preparation of PFCB aryl ether polymers and their properties is then presented. Topics of PFCB aryl ether polymers and their applications include photonics, polymer light emitting diodes (PLEDs), proton exchange membranes (PEMs) for fuel cells, atomic oxygen (AO) resistant coatings, and hybrid composites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5705–5721, 2007     

Mechanically induced scission and subsequent thermal remending of perfluorocyclobutane polymers

Perfluorocyclobutane (PFCB) polymer solutions were subjected to pulsed ultrasound, leading to mechanically induced chain scission and molecular weight degradation. (19)F NMR revealed that the new, mechanically generated end groups are trifluorovinyl ethers formed by cycloreversion of the PFCB groups, a process that differs from thermal degradation pathways. One consequence of the mechanochemical process is that the trifluorovinyl ether end groups can be remended simply by subjecting the polymer solution to the original polymerization conditions, that is, heating to >150 °C. Stereochemical changes in the PFCBs, in combination with radical trapping experiments, indicate that PFCB scission proceeds via a stepwise mechanism with a 1,4-diradical intermediate, offering a potential mechanism for localized functionalization and cross-linking in regions of high stress.     

The effect of crosslinking on thermal and mechanical properties of perfluorocyclobutane aromatic ether polymers

As the minimum features in semiconductor devices decrease, it is a new trend to incorporate copper and polymers with dielectric constant less than 3.0 to enhance the performance of the devices. Two fluorinated polymers, poly(biphenyl perfluorocyclobutyl ether) (BPFCB) and poly(1,1,1-triphenyl ethane perfluorocyclobutyl ether) (PFCB), are newly developed polymers with dielectric constants below 3.0. These two polymers have a similar backbone structure, but PFCB has the capability of crosslinking. To know the implications of these two polymers in the semiconductor industry, properties that are important for the integral reliability of Integral Circuits (IC), such as thermal and mechanical properties, should be understood. This comparative study shows that the crosslinking in perfluorocyclobutane aromatic ether polymer can reduce vertical thermal expansion and increase glass transition temperature (T_g) while water absorption, crystalline-like phase, and dielectric constant are slightly increased. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1383–1392, 1998     

Synthesis and electronic factors in thermal cyclodimerization of functionalized aromatic trifluorovinyl ethers

A series of 19 p-substituted aromatic trifluorovinyl ether compounds were prepared from versatile intermediate p-Br-C(6)H(4)-O-CF=CF(2) and underwent thermal radical mediated cyclodimerization to new difunctional compounds containing the 1,2-disubstituted perfluorocyclobutyl (PFCB) linkage. The synthetic scope demonstrates the functional group transformation tolerance of the fluorovinyl ether, and the dimers are useful as monomers for traditional step-growth polymerization methods. (19)F NMR spectra confirmed that p-substitution affects the trifluorovinyl ether group chemical shifts. The first kinetic studies and substituent effects on thermal cyclodimerization were performed, and the results indicated that electron-withdrawing groups slow the rate of cyclodimerization. The data were further analyzed using the Hammett equation, and reaction constants (rho) of -0.46 at 120 degrees C and -0.59 at 130 degrees C were calculated. This study presents the first liner free energy relationship reported for the cyclodimerization of aromatic trifluorovinyl ethers to PFCB compounds.     

Facile one‐pot synthesis and thermal cyclopolymerization of aryl bistrifluorovinyl ether monomers bearing reactive pendant groups

A diverse pool of aryl bistrifluorovinyl ether (BTFVE) compounds with reactive pendant groups were prepared in a facile, high yielding three step “one‐pot” synthesis from commercial 4‐bromo(trifluorovinyloxy)benzene. Monomers were confirmed from ATR–FTIR, ¹H, ¹³C, and ¹⁹F NMR, and HRMS analysis. Aryl BTFVE compounds were thermally polymerized to afford perfluorocyclobutyl (PFCB) aryl ether polymers with high number–average molecular weight (M_n) for homopolymers (17,050–27,090) and copolymers with 4,4′‐bis(trifluorovinyloxy)biphenyl monomers (27,860–56,500). The PFCB aryl ether homo‐ and copolymers collectively possess high thermal stability (>299 °C in N₂) and are readily solution processable producing optically transparent films. The thermal polymerization was achieved and reactive moieties remained intact, aside from those functionalized with acrylates. In the case with acrylate functionalized polymers, orthogonal polymerization was achieved by first photopolymerizing the acrylates followed by thermal curing of the aryl trifluorovinyl ether endgroups. Preliminary results in this study produced the successful preparation of photodefinable PFCB aryl ether material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1887–1893, 2010     

Incorporation of Hexa‐peri‐hexabenzocoronene (HBC) into Carbazole–Benzo‐2,1,3‐thiadiazole Copolymers to Improve Hole Mobility and Photovoltaic Performance

Hexa‐peri‐hexabenzocoronene (HBC) is a discotic‐shaped conjugated molecule with strong π–π stacking property, high intrinsic charge mobility, and good self‐assembly properties. For a long time, however, organic photovoltaic (OPV) solar cells based on HBC demonstrated low power conversion efficiencies (PCEs). In this study, two conjugated terpolymers, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5′‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT)‐ 5 HBC and PCDTBT‐ 10 HBC, were synthesized by incorporating different amounts of HBC as the third component into poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5′‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT) through Suzuki coupling polymerization. For comparison, the donor–acceptor (D –A) conjugated dipolymer PCDTBT was also synthesized to investigate the effect of HBC units on conjugated polymers. The HBC‐containing polymers exhibited higher thermal stabilities, broader absorption spectra, and lower highest‐occupied molecular orbital (HOMO) energy levels. In particular, the field‐effect mobilities were enhanced by more than one order of magnitude after the incorporation of HBC into the conjugated polymer backbone on account of increased interchain π–π stacking interactions. The bulk heterojunction (BHJ) polymer solar cells (PSCs) fabricated with the polymers as donor and PC₇₁BM as acceptor demonstrated gradual improvement of open‐circuit voltage (V_OC) and short‐circuit current (J_SC) with the increase in HBC content. As a result, the PCEs were improved from 3.21 % for PCDTBT to 3.78 % for PCDTBT‐ 5 HBC and then to 4.20 % for PCDTBT‐ 10 HBC.     

Perfluorocyclobutyl-containing Amphiphilic Block Copolymers Synthesized by RAFT Polymerization

Amphiphilic block copolymers containing hydrophobic perfluorocyclobutyl‐based (PFCB) polyacrylate and hydrophilic poly(ethylene glycol) (PEG) segments were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The PFCB‐containing acrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)‐phenyl acrylate, was first synthesized from commercially available compounds in good yields, and this kind of acrylate monomer can be homopolymerized by free radical polymerization or RAFT polymerization. Kinetic study showed the 2,2′‐azobis(isobutyronitrile) (AIBN) initiated and cumyl dithiobenzoate (CDB) mediated RAFT polymerization was in a living fashion, as suggested by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer, while the polydispersity indices kept less than 1.10. The block polymers with narrow molecular weight distributions (M_w/M_n≦1.21) were prepared through RAFT polymerization using PEG monomethyl ether capped with 4‐cyanopentanoic acid dithiobenzoate end group as the macro chain transfer agent (mPEG‐CTA). The length of the hydrophobic segment can be tuned by the feed ratio of the PFCB‐based acrylate monomer and the extending of the polymerization time. The micellization behavior of the block copolymers in aqueous media was investigated by the fluorescence probe technique.     

Sulfonated poly(fluorenyl ether) membranes containing perfluorocyclobutane groups for fuel cell applications

This paper describes the preparation and electrochemical properties of new proton conducting polymer membranes, sulfonated poly(fluorenyl ether) membrane-containing perfluorocyclobutane (PFCB) moieties for fuel cell applications. The sulfonated polymers were prepared via thermal cyclodimerization of 9,9-bis(4-trifluorovinyloxyphenyl)fluorene and subsequent post-sulfonation using chlorosulfonic acid (CSA) as a sulfonating agent. The post-sulfonation reaction was carried out by changing the molar ratio of CSA/repeating unit of the polymer at room temperature for 5 h and the resulting sulfonated polymers showed different degrees of sulfonation (DS) and ion exchange capacities (IEC). With the increment of CSA content, the DS, IEC and water uptake of the sulfonated polymer membranes increased. Their proton conductivity was investigated as a function of temperature. The polymer membrane with an IEC value of 1.86 mmol/g showed a water content of 25% similar to Nafion-115's but showed higher proton conductivity than Nafion-115 over the temperature 25–80 °C. The polymer membrane with lower water uptake and higher IEC showed similar proton conductivity and methanol permeability to Nafion-115. These results confirmed that the sulfonated poly(fluorenyl ether)-containing PFCB groups could be a promising material for fuel cell membranes.     

Precursor synthesis strategy for polycyclic aromatic conjugated polymers on the application of supercapacitors

Polycyclic aromatics (PCAs) possess excellent photoelectric properties, but the construction of such compounds has been a quite challenging subject of study, mainly due to very low solubility. Herein we report a precursor synthesis strategy for polycyclic aromatic conjugated polymers. A soluble precursor polymer, that containing fusible “double U-shaped aromatic” (DUA) and perylenetetracarboxydiimide (PDI) units, was firstly synthesized by Suzuki coupling. The stereo aromatic units in polymer backbone were found to be converted into polycyclic aromatic units, i.e. hexa-peri-hexabenzocoronene (HBC), by chemical or electrochemical oxidation, which resulted in a formation of insoluble polycyclic aromatic conjugated polymers. The electrochemical oxidations that occurred at the interface of electrode and solution exhibited higher cyclization reactivity and leads to the formation of high quality films on the electrode surface. Characterization by Raman and UV-visible (UV-Vis) spectroscopy validated the successful formation of this HBC structure. Some potential applications of such thin films are being explored, and here we focus on the characteristics of supercapacitors based on their excellent electrochemical properties.     

Synthesis and Degradation of Vinyl Polymers with Evenly Distributed Thioacetal Bonds in Main Chains: Cationic DT Copolymerization of Vinyl Ethers and Cyclic Thioacetals

We report a novel method to synthesize degradable poly(vinyl ether)s with cleavable thioacetal bonds periodically arranged in the main chains using controlled cationic copolymerization of vinyl ethers with a 7-membered cyclic thioacetal ( 7-CTA ) via degenerative chain transfer (DT) to the internal thioacetal bonds. The thioacetal bonds, which are introduced into the main chain by cationic ring-opening copolymerization of 7-CTA with vinyl ethers, serve as in-chain dormant species to allow homogeneous propagation of vinyl ethers for all internal segments to afford copolymers with controlled overall and segmental molecular weights. The obtained polymers can be degraded into low- and controlled-molecular-weight polymers with narrow molecular weight distributions via hydrolysis. Various vinyl ethers with hydrophobic, hydrophilic, and functional pendants are available. Finally, one-pot synthesis of multiblock copolymers and their degradation into diblock copolymers are also achieved.     

Synthesis,characterization, and ion‐complexing properties of polymers displaying densely packed arrays of crown‐ethers as lateral substituents

We report the synthesis and ion‐binding properties of four poly(crown‐ethers) displaying either one or two crown‐ethers (15‐crown‐5 or 18‐crown‐6) on every third carbon alongside the backbone. The polymers were synthesized by living anionic ring‐opening polymerization of disubstituted cyclopropane‐1,1‐dicarboxylates monomers. Cation binding of the polychelating polymers and corresponding monomers to Na⁺ and K⁺ was evaluated by picrate extraction and isothermal calorimetry titration. This novel family of poly(crown‐ethers) demonstrated excellent initial binding of the alkali ions to the polymers, with a higher selectivity for potassium. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2337–2345     

Living Cationic Polymerization Toward Macromolecular Design: Synthesis of End-Functional Multiarmed Polymers

A series of multiarmed polymers with terminal functional groups have been synthesized on the basis of living cationic polymerizations of vinyl ethers and p-alkoxystyrenes. The syntheses were performed by two methods, one via living polymerizations with new multifunctional initiating systems followed by endcapping of the resultant multifunctional living polymers, and the other using designed silyl enol ethers as multifunctional terminators (coupling agents) that combine two to four end- functionalized linear living polymers. These two methodologies thus led to telechelic and 3- or 4-arm star polymers and macromonomers with hydroxyl, acetate, methacrylate, and styryl end functionalities.     

Synthesis and characterization of blue‐light emissive carbazole containing perfluorocyclobutyl arylene ether polymers

A series of N‐alkyl/aryl carbazole 3,6‐substituted arylene trifluorovinyl ether (TFVE) monomers were synthesized in high purity and yield from a concise four‐step synthesis using carbazole as a starting material. Condensate‐free, step‐growth chain extension of the monomers afforded perfluorocyclobutyl (PFCB) arylene ether homo‐ and copolymers as solution processable, optically transparent blue‐light emissive materials. Arylene TFVE monomers and conversion to PFCB arylene ether polymers were structurally elucidated and purity confirmed by high resolution mass spectroscopy, NMR (¹H, ¹³C, and ¹⁹F) spectroscopy, gel permeation chromatography, and attenuated total reflectance Fourier transform infrared analysis. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis revealed glass transition temperatures >150 °C and onset of decomposition in nitrogen >410 °C with 40 wt % char yield up to 900 °C. Optical and electrochemical studies included solution (tetrahydrofuran) and solid state (spin cast thin film) UV–vis/fluorescence spectroscopy and cyclic voltammetry which showed structure dependence of these blue emissive systems on the nature of the N‐alkyl/aryl carbazole substitution in either homo‐ or copolymer configurations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 552–560     

A novel semi-fluorinated graft copolymer containing perfluorocyclobutyl aryl ether-based backbone

The synthesis of a series of novel semi-fluorinated graft copolymers bearing perfluorocyclobutyl (PFCB) aryl ether-based backbone and polystyrene side chains is described. This work initially focused on the synthesis of a trifluorovinyl ether (TFVE) monomer containing a bromine atom, which could be employed as an initiating site for atom transfer radical polymerization (ATRP). Thermal cyclopolymerization of this TFVE monomer provided a macromolecular initiator followed by subsequent initiating ATRP of styrene to afford the desired PFCB aryl ether-based graft copolymers.     

Oxidative cyclorelease from soluble polymeric supports

[reaction: see text] Single electron oxidation is shown to be a viable method for effecting concomitant cyclization and cleavage (cyclorelease) of a series of polymer bound homobenzylic ethers. Soluble oligonorbornene polymers are stable toward redox chemistry and are isolable through precipitation with methanol, making them excellent supports for this process. These oxidative conditions are also shown to cleave secondary and tertiary alcohols and ethers in a new traceless approach to polymer-supported aldehyde and ketone synthesis.     

Heterotactic poly(vinyl alcohol)

Bulky substituents in vinyl trialkylsilyl ethers and vinyl trialkylcarbinyl ethers led to heterotactic polymers (H = 66%). The polymers were converted into poly(vinyl alcohol) (PVA) and further to poly(vinyl acetate), and tacticity was determined as poly(vinyl acetate). Vinyl triisopropylsilyl ether in nonpolar solvents yielded a heterotactic polymer with a higher percentage of isotactic triads than syndiotactic triads (Hetero-I). Vinyl trialkylcarbinyl ethers in polar solvents gave a heterotactic polymer with more syndiotactic triads than isotactic (Hetero-II). Heterotactic PVA was soluble in water and showed characteristics infrared absorptions. Interestingly, Hetero-I PVA showed no iodine color reaction, but Hetero-II showed a much more intense color reaction than a commercial PVA. The mechanism of heterotactic propagation was discussed in terms of the Markóv chain model.     

苯乙炔封端的可交联含氟聚芳醚的合成及性能

从光电集成器件对于材料性能的需要出发 ,我们相继合成了一系列可溶性的含氟聚芳醚和聚芳醚酮[1～ 5] .为了满足器件的多层化制备过程以及使器件成型后具有优异的性能 ,本文在间三氟甲基苯取代的聚芳醚 (1 1 F- PAE)中引进可交联的苯乙炔端基 ,合成了可热交联的高含氟量聚芳醚 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 4-苯乙炔苯酚 (PEP)按文献 [6 ]方法制备 ;3 -氟甲基苯代对苯二酚 (3 F- PH)按文献[2 ]方法制备 ;十氟联苯 ,Aldrich公司 ,99%;无水碳酸钾 ,A.R.级 ,天津化学试剂厂 ;甲苯 ,A.R.级 ,北京化工厂 ;N-…     

The influence of comonomer (2‐hydroxyethyl acrylate) and keto group on photocrosslinking property of arylidene polymers

Two types of arylidene compounds were synthesized by reacting p‐hydroxybenzaldehyde with acetone [1,5‐bis(4‐hydroxyphenyl)penta‐1,4‐dien‐3‐one] (PBHP) and cyclohexanone [2,6‐bis(4‐hydroxybenzylidene)cyclohexanone] (HBC). 1,4‐Pentadien‐3‐one‐1‐p‐hydroxyphenyl‐5‐p‐phenyl methacrylate (PHPPMA) and 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA) were prepared by reacting PBHP and HBC with methacryloyl chloride and acryloyl chloride in the presence of triethylamine, respectively. Copolymerization of different feed compositions of PHPPMA and HBA with 2‐hydroxyethyl acrylate (HEA) was carried out using a free‐radical solution polymerization technique in ethyl methyl ketone (MEK) using benzoyl peroxide (BPO). All the monomer and polymers were characterized by IR and NMR (¹H/¹³C) spectroscopic techniques. The reactivity ratio of the monomers were obtained using Fineman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (exKT) methods. The photocrosslinking properties of the polymers were done using a UV absorption spectroscopy technique. Homopolymers of both the arylidene polymers shows similar trend towards the rate of photocrosslinking. The rate of photocrosslinking was enhanced when the cyclohexanone based arylidene monomer was copolymerized with HEA. Thermal stability and molecular weights (M_w and M_n) of the polymers were determined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3433–3444, 2004     

Dendritic analogues of engineering plastics - a general one-step synthesis of dendritic polyaryl ethers

The first general single-step route to dendritic or cascade polyaryl ethers analogous to common linear polyaryl ethers is described. The sodium salts of four AB₂ monomers each containing a single phenolic hydroxyl group and two aryl fluorides activated toward nucleophilic substitution by carbonyl, sulphonyl, or tetrafluorophenyl moieties are shown to polymerize in hot N, N-dimethylacetamide. The products are high molecular weight polymers (7000 < M_n < 36000), have narrow polydispersities (1.50 < M_w/M_n < 4.50), and are highly soluble in organic solvents. The molecular weights of two of the polymers increase with monomer concentration. The polymers are thermally stable (500 °C under N₂) and have glass transition temperatures ranging from 135 to 231 °C.     

饱和漆酚冠醚聚合物的研究

<正> 冠醚具有选择性络合阳离子的能力,引起了人们极大的兴趣。高分子冠醚或冠醚高分子固定化,从应用角度考虑,不仅毒性降低,而且易于回收和反复使用,这是扩大冠醚应用范围的一个重要途径,也是研究冠醚化学的新动向,smid等对冠醚高聚物的合成和络合性能的研究已有报道。Blasius等将二苯并18-冠-6与甲醛或与苯酚及甲醛缩聚,得到冠醚高聚物可作为离子交换剂。