Micellization in aqueous solution of an ethylene oxide-propylene oxide triblock copolymer, investigated with 1H NMR spectroscopy, pulsed-field gradient NMR, and NMR relaxation

(1)H nuclear magnetic resonance (NMR) spectroscopy has been applied to study the temperature and concentration-induced micellization of a poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) triblock copolymer, Pluronic P105, in D(2)O solutions in the temperature range from 5 to 45 degrees C and the concentration range from 0.01 to 15% (w/v). The intrinsic probes, the chemical shift, and the half-height width of the PO CH(3) signal are very sensitive to the local environment and can be used to characterize the temperature and concentration-dependent aggregation process. When the temperature approaches the critical micellization temperature or the polymer concentration reaches the critical micellization concentration, the chemical shift of the PO CH(3) signal moves toward lower ppm values and the half-height width of the PO CH(3) signal shows a sudden increase. It indicates that the methyl groups are experiencing a progressively less polar environment and transferring from water to the hydrophobic micellar core. The hydrodynamic radius of the unimers and the micelles are determined as be 1.8 and 5.0 nm by means of pulsed-field gradient spin-echo (PGSE) NMR. They were independent of temperature and concentration. The drastic shortening of spin-lattice relaxation time T(1) for the PO CH(3)/CH(2) protons in the transition region suggested that the PPO blocks are located in a "liquid-like" micellar core, whereas the exponential increase of T(1) for the PEO CH(2) protons implied that the PEO blocks are still keeping in contact with surrounding water. Thermodynamics analysis according to a closed association model shows that the micellization process is entropy-driven and has an endothermic micellization enthalpy.     

Restricted self-diffusion in an aqueous solution of poly(ethylene oxide) poly(propylene oxide) poly(ethylene oxide) triblock copolymer

 The self-diffusion behavior of a triblock copolymer (PEO–b– PPO–b–PEO) in an aqueous solution of 20% (m/m) was investigated during a temperature-induced phase transition from liquid to gel state using pulsed field gradient NMR and static light scattering. The measured self-diffusivity shows a strong dependence on the observation time in the gel phase indicating the existence of diffusion barriers in the size range of about 0.6 μm. Additional static light-scattering measurements show a structure in the same size range of several hundred nanometers, which is far above molecular or micellar sizes and thus, has to be caused by larger clusters. The similarity in the space scales suggests that the restriction of molecular propagation is correlated with the grain boundaries between the domains of the poly-crystalline structure formed by the arranged micelles. Received: 28 October 1996 Accepted: 21 March 1997     

Effect of inorganic salts on the micellar behaviour of ethylene oxide-propylene oxide block copolymers in aqueous solution

The aggregation behaviour of two ethylene oxide-propylene oxide block copolymers (PEO-PPO-PEO) in aqueous solution has been investigated in the presence of added salts (KCNS, KI, KBr, KCl and KF) by viscosity, cloud point, light scattering, pulse gradient spin echo NMR, and solubilization measurements. The salts have a strong effect on the cloud points of the pluronics. Both P-85 and L-64 form micelles which increase in size and change into elongated shapes when the cloud point is approached. The changes of size and shape of the micelles, revealed by the intrinsic viscosity and rheological properties, seem to occur at the same temperature relative to the cloud point, independent of the nature of the salt. The onset of micelle formation is also shifted in the same direction as the cloud point by the salts, but by a much smaller amount.     

The micellization of the diblock copolymer of ethylene oxide and styrene in benzene and the effect on the preparation of the star ABC triblock copolymer of ethylene oxide, styrene and methyl methacrylate

In the preparation of the ABC star triblock copolymer of ethylene oxide, styrene and methyl methacrylate (MMA), the photo-induced charge-transfer complex (CTC) was used to initiate the polymerization of the third monomer MMA. The CTC was composed of the diblock copolymer of poly(ethylene oxide) (PEO) and polystyrene (PS), PEO-b _i -PS, with an aromatic imino group at the conjunction point and benzophenone (BP). It was confirmed that the kinetic behavior of this macromolecular initiation system is nearly the same with a general small radical initiator: the polymerization rate R _p ∝ [PEO-b _i -PS]^0.48[BP]^0.45[MMA]^0.97. Moreover, if the molecular weight of the PEO block is fixed, R _p is independent of the molecular weight of the PS block.  By means of measurements of viscosity and fluorescence, it was found that the micelles of the diblock copolymer PEO-b _i -PS were formed in benzene. The aromatic imino groups were located on the boundary surfaces of the micelles and were fully exposed, and so the BP and MMA molecules easily approached them and affected the charge-transfer polymerization of MMA. Received: 18 August 1998 Accepted in revised form: 25 November 1998     

Effect of the nature of the spacer on the aggregation properties of gemini surfactants in an aqueous solution

The aggregation properties of three dicationic quaternary ammonium gemini surfactants with the same structure, except the spacer group, diethyl ether, six methylene, and p-xylyl, have been studied using electrical conductivity and fluorescence. The critical micelle concentration (cmc) and the micelle aggregation number (N) were determined, and the micropolarity and the microviscosity of the micelle were characterized. The micelle ionization degree (alpha) was obtained by a combination of the electrical conductivity data and the micelle aggregation number. Furthermore, the Gibbs free energy of micellization (deltaGmic) was studied. These results have shown that the nature of the spacer has an important effect on the aggregation properties of gemini surfactants in an aqueous solution. A hydrophilic, flexible spacer prompts micelle formation, which leads to a smaller cmc, smaller alpha, larger N, and more negative deltaGmic. Meanwhile, the microviscosity study indicates that the gemini surfactant with a hydrophilic, flexible spacer forms a more closely packed micelle structure than the one with a hydrophobic, rigid spacer.     

Effect of heating rate on thermo-induced aggregation of poly(ethylene oxide)-b-poly(N-isopropylacrylamide) in aqueous solutions

<正>The effects of heating rate on the aggregate behavior of poly(ethylene oxide)-b-poly(N-isopropylacrylamide) in aqueous solutions were investigated in detail by laser light scattering and TEM.By employing two separate heating protocols,step-by-step heating at5 K/step and one-step jump,to heat the sample from 15℃to the selected temperature, we found that the heating rate only showed significant effect on the aggregates above the cloud point.The aggregate formed by step-by-step heating exhibited a much larger size and a broader size distribution than those formed by one-step jump heating.Moreover,neither of the aggregates were ideal micellar structures as indicated by the size and the R_g/R_h values.On the contrary,at temperatures below the cloud point where the block copolymer formed core-shelled micelles,the heating rate showed negligible effect on the size and size distribution of the micelles.Since the system underwent a phase separation above the cloud point,the heating rate effect could be reasonably explained by the phase separation mechanisms:the nucleation-and-growth mechanism in the metastable region and the spinodal decomposition mechanism in the unstable region.     

Effects of the thermal history and concentration on the aggregation of Erwinia gum in an aqueous solution

The aggregation of Erwinia (E) gum in a 0.2 M NaCl aqueous solution was investigated by multi‐angle laser light scattering and gel permeation chromatography (GPC) combined with light scattering. The GPC chromatograms of five fractions contained two peaks; the fractions had the same elution volume but different peak areas, suggesting that aggregates and single chains coexisted in the solution at 25 °C. The apparent weight‐average molecular weights (M_w) of the aggregates and single chains for each fraction were all about 2.1 × 10⁶ and 7.8 × 10⁴, respectively. This indicates that the aggregates were composed of about 27 molecules of E gum in the concentration range used (1.0 × 10⁻⁶ to 5.0 × 10⁻⁴ g/mL). The weight fraction of the aggregates (w_ag) increased with increasing concentration, but the aggregates still existed even in an extremely dilute solution. The fractionation process and polymer concentration hardly affected the apparent aggregation number but significantly changed w_ag. The E‐gum M_w decreased sharply with an increase in temperature. When the E‐gum solution was kept at 100 °C, w_ag decreased sharply for 20 h and leveled off after 100 h. Once the aggregates were decomposed at a higher temperature, no aggregation was observed in the solution at 25 °C, indicating that the aggregation was irreversible. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1352–1358, 2000     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Hydrophobically end-capped poly (ethylene oxide) urethanes. Part 3: Effect of sodium dodecyl sulphate on their association in aqueous solution

The interactions between sodium dodecyl sulphate (SDS) and three autoassociative polymers (hydrophobically end-capped poly(ethylene oxide) urethanes) are studied by conductimetry, fluorescence, and viscometry. By the first two techniques the interactions are found to increase with the hydrophobicity of the polymer and to be stronger than those observed for a polyethylene oxide (PEO) of the same order of molecular weight. The results seem to be consistent with a model where SDS micelles are formed around hydrophobic chain ends in a first stage, and along the main chain in a second stage. For the more hydrophobic sample already self-aggregated in water and of relatively large reduced viscosity, the addition of SDS induces a loss in viscosity contrary to the less hydrophobic ones and PEO. Such effect may be attributed to the destruction of the chain end association by the formation of SDS micelles around one end in the first stage of the interaction.     

Surfactant characteristics of polystyrene/poly(ethylene oxide) macromonomers in aqueous solution and on polystyrene latex particles: Two‐step emulsion polymerizations

Macromonomers were synthesized by anionic “living” polymerization. They comprised a poly(ethylene oxide) hydrophilic block and a hydrophobic block or sequence terminated with an unsaturation. The surface activity properties of these materials (critical micelle concentration and parking area) were determined, and the values were compared and discussed in terms of the molecular structure of these new surfactants. Some of the macromonomers were employed as emulsifiers in two‐step emulsion polymerizations. The data obtained were discussed while taking into account the different chemical structures of the macromonomers and the efficiency of these species as emulsifiers in the polymerization recipes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2767–2776, 2001     

Effect of hydrotropes on the solution behavior of PEO/PPO/PEO block copolymer L62 in aqueous solutions

Effect of hydrotropes viz. sodium benzene sulfonate (NaBS), sodium toluene sulfonate (NaTS) and sodium xylene sulfonate (NaXS) on the micellization, phase behavior and structure of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer L62 in aqueous solution was studied by surface tension, dye spectral, cloud point and small angle neutron scattering measurements. The addition of hydrotropes increased the critical micelle concentration (CMC) of L62 which appears to be logistic as the added hydrotrope enhances the solubility of PPO moiety (and PEO) making it behave like a more hydrophilic block copolymer that would micellize at high copolymer concentration. Partial phase diagram of L62 in water shows two cloud point (CP) in the concentration range (0-10 wt.%). Addition of hydrotropes shifts the L62 concentration range showing double cloud points at lower side of concentration; sodium xylene sulfonate (NaXS) being more effective. SANS data for L62 in the presence of 0.4 and 0.8 M NaXS at temperatures <30 °C showed unimers which are fully dissolved Gaussian chains. The unimer-to-micelle transition takes place when temperature is increased. It is found that SANS data for L62 in the presence of 0.4 M NaXS (40 and 50 °C) and 0.8 M NaXS (45 and 50 °C) correspond to ellipsoidal structure of micelles.     

Effect of bovine serum albumin on the micellization of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers in aqueous solutions by fluorescence spectroscopy

Effect of bovine serum albumin (BSA) on the temperature-dependent association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers was investigated using pyrene fluorescence spectroscopy. The critical micellization temperature (CMT) of pluronics in aqueous solution was increased by the addition of BSA. A closed association model was used to obtain the standard free energies (△G0), enthalpies (△H 0), and entropies (△S 0) of micellization. The standard enthalpy and entropy of micellization for pluronic polymers in water were decreased with an increase of the BSA content. The more PPO component in the pluronic polymer, the higher the changed values of micellization enthalpy and entropy. The hydrophobic part of the pluronics, PPO, was responsible for the interaction between pluronics and BSA. Hydrophobic interaction between PPO and BSA was correlated to the alternation of the PPO-PPO interaction by the addition of BSA, which would shift the CMT toward higher temperature and alter the thermodynamic parameters of micellization for pluronics in aqueous solutions.     

Effect of stereocomplex formation between enantiomeric poly(l,l-lactide) and poly(d,d-lactide) blocks on self-organization of amphiphilic poly(lactide)-block-poly(ethylene oxide) copolymers in dilute aqueous solution

The effect of crystallization of a hydrophobic poly(lactide) block on the self-organization of biocompatible and biodegradable amphiphilic poly(lactide)-block-poly(ethylene oxide) (PLA-b-PEO) copolymers in a dilute aqueous solution has been investigated. It was demonstrated that the co-crystallization of poly(L,L-lactide) [P(L,L)LA] and poly(d,d-lactide) [P(d,d)LA] chains under equimolar mixing of P(L,L)LA₄₆-b-PEO₁₁₃ and P(d,d)LA₅₆-b-PEO₁₁₃ copolymers resulted in the formation of stable and spontaneously water-redispersible stereocomplex micelles with semicrystalline P(L,L)LA/P(d,d)LA cores. It was shown that the P(L,L)LA₄₆ / P(d,d)LA₅₆-b-PEO₁₁₃ stereo-complex micelles produced by dialysis can be potential vehicles for the anticancer agent oxaliplatin     

Effect of polystyrene‐b‐poly(ethylene oxide) on self‐assembly of polystyrene‐b‐poly(N‐isopropylacrylamide) in aqueous solution

Mixed micelles of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) and two polystyrene‐b‐poly(ethylene oxide) diblock copolymers (PS‐b‐PEO) with different chain lengths of polystyrene in aqueous solution were prepared by adding the tetrahydrofuran solutions dropwise into an excess of water. The formation and stabilization of the resultant mixed micelles were characterized by using a combination of static and dynamic light scattering. Increasing the initial concentration of PS‐b‐PEO in THF led to a decrease in the size and the weight average molar mass (〈M_w〉) of the mixed micelles when the initial concentration of PS‐b‐ PNIPAM was kept as 1 × 10^?3 g/mL. The PS‐b‐PEO with shorter PS block has a more pronounced effect on the change of the size and 〈M_w〉 than that with longer PS block. The number of PS‐b‐PNIPAM in each mixed micelle decreased with the addition of PS‐b‐PEO. The average hydrodynamic radius 〈R_h〉 and average radius of gyration 〈R_g〉 of pure PS‐b‐PNIPAM and mixed micelles gradually decreased with the increase in the temperature. Both the pure micelles and mixed micelles were stable in the temperature range of 18 °C–39 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1168–1174, 2010