Ionic liquid-assisted SDS-PAGE to improve human serum protein separation

Ionic liquid (IL)-assisted sodium dodecyl sulfate polyacrylamide gel electrophoresis (ILs-SDS-PAGE) was presented to improve protein separation. ILs were employed during the preparation process of polyacrylamide gel, then the modified gel was used for commercial protein marker, binary bovine serum albumin/lysozyme (BSA/Lyz) and human serum separation. The influence of ionic liquid concentration, cation alkyl chain length, cation and anion types on proteins separation were investigated. The results showed that ILs played a role in improving some protein separation, and ILs-SDS-PAGE provided higher resolution and separation efficiency than ordinary SDS-PAGE for low and middle relative molecular mass proteins in human serum. In addition, the principle of ILs-SDS-PAGE was discussed and the comparison of ILs-SDS-PAGE with ordinary SDS-PAGE and Native PAGE was made.     

One‐step zymogram method for the simultaneous detection of cellulase/xylanase activity and molecular weight estimation of the enzyme

Here, we describe a zymographic method for the simultaneous detection of enzymatic activity and molecular weight (MW) estimation, following a single electrophoresis step. This involved separating cellulase and xylanase activities from bacteria and fungi, obtained from different sources, such as commercial extracts, crude extract and purified proteins, under denaturing conditions, by 10% polyacrylamide gel electrophoresis, using polyacrylamide gels copolymerized with 1% (w/v) carboxymethylcellulose or beechwood xylan as substrates. Then, enzymes were refolded by treatment with 2.5% Triton X‐100 in an appropriate buffer for each enzymatic activity, and visualized by Coomassie blue staining for MW estimation. Finally, Congo red staining revealed bio‐active cellulase and xylanase bands after electrophoretic separation of the proteins in the preparations. This method may provide a useful additional tool for screening of particular cellulase and xylanase producers, identification and MW estimation of polypeptides that manifest these activities, and for monitoring and control of fungal and bacterial cellulase and xylanase production.     

Automated protein analysis by online detection of laser-induced fluorescence in slab gels and 3-D geometry gels

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) still remains the most reliable and comprehensive analytical method for the evaluation of protein extracts. However, conventional SDS-PAGE is time-consuming and, thus, unpractical if several tens or hundreds of samples must be examined. We show that SDS-PAGE protein analysis can be automated using slab gel DNA sequencers and compare the instrument's performance with conventional SDS-PAGE in terms of resolution, sensitivity and sample capacity. Labeled protein bands are detected online by laser-induced fluorescence (LIF) and the acquired signals are electronically stored for further processing, avoiding gel staining and scanning. Appropriate software allows immediate display of recorded data and convenient evaluation. The method provides a higher sensitivity and dynamic range than conventional Coomassie-stained gels and the resolution of proteins with different masses is independent of the polyacrylamide concentration. Internal markers can also be used for direct quantification and assignment of the molecular masses. Additionally, we present a novel electrophoresis instrument for the simultaneous separation and online LIF detection of all samples of a microtiterplate in parallel lanes in a 3-D geometry gel cylinder. The specific gel thermostatting concept prevents irregular sample migration (smiling) and improves the reproducibility and comparability of individual separation patterns. In combination with the expected large capacity of 384 or 1,536 samples, this makes the instrument a valuable tool for high-throughput comparative screening applications.     

Influence of Ionic Strength, pH, and SDS Concentration on Subunit Analysis of Phycoerythrins by SDS-PAGE

Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) is often used for subunit analysis of proteins, but it is not efficient to make the α- and β-subunits of phycoerythrins separated by normal SDS-PAGE. In this research, subunit components and subunit molecular weights of four purified phycoerythrins were analyzed by SDS-PAGE. Four factors including Tris concentration, pH, ammonium persulfate (APS), and SDS concentration were studied for their effects on SDS-PAGE of phycoerythrins. It showed that these factors can influence the separation of α- and β-subunits, electrophoresis effect of γ-subunits, apparent molecular weights of subunits, and mobility of marker proteins. The α- and β-subunits separated better in the case of lower SDS concentration, lower Tris concentration, higher pH, and/or lower APS addition in separating gels. The molecular weights of α- and β-subunits increased when Tris concentration increased in a certain range. It can be concluded that factors critical to subunit analysis by SDS-PAGE are SDS concentration and ionic strength, both of which are related to critical micelle concentration of SDS and ratio of SDS monomer to micelle in SDS-PAGE system. The ratio is postulated to influence SDS-PAGE by influencing the amount of SDS bound to polypeptides and shapes of polypeptide–SDS complexes.     

Mobility, diffusion and dispersion of single-stranded DNA in sequencing gels

Electrophoresis of single-stranded DNA in denaturing polyacrylamide gels is presently a standard procedure for the sequencing of DNA fragments. A thorough understanding of the factors that determine the resolution of DNA fractionated in polyacrylamide gels is necessary to optimize the performance of DNA sequencers. Significant research on the mobility of double-stranded (ds)DNA molecules in agarose and polyacrylamide gels has been performed, and the phenomenon of band broadening of single-stranded (ss)DNA fragments in DNA sequencing gels has received attention only recently. In this paper, we present a detailed study of mobility, diffusion and dispersion of ssDNA in sequencing gels as a function of molecular size, gel concentration and electric field strength. DNA mobility is shown to be essentially independent of electric field in the range of 0-60 V/cm. The band broadening is greatly enhanced in the presence of an electric field and the dispersion coefficient (DE) can be an order of magnitude higher than the field-free diffusion coefficient. The measured migration parameters approximately follow the predictions of the biased reptation including fluctuations (BRF) theory. However, deviations due to nonidealities of the separation conditions are observed. The measured migration parameters can be used to optimize the performance of separation systems.     

Routine diagnosis with PhastSystem compared to conventional electrophoresis: automated sodium dodecyl sulfate-polyacrylamide gel electrophoresis, silver staining and western blotting of urinary proteins

The recent introduction of the PhastSystem, an automatic electrophoresis and staining system with precast gradient-gels, allows rapid and reproducible analysis of proteinuria in patients suffering from renal injury. A routine method for sodium dodecyl sulfate-polyacrylamide gradient gel electrophoresis (SDS-PAGE) and silver staining of unconcentrated urine specimens in the PhastSystem is described and compared to our conventional "macro"-method with self-cast SDS-polyacrylamide gradient gels. The method described for the PhastSystem using 0.3 microL sample volumes and an 8-25% polyacrylamide gradient gel leads to highly reproducible results within 1.5 h. Before electrophoresis urine specimens were neither concentrated nor dialyzed. Samples with a protein concentration exceeding 5 mg/mL had to be diluted 1:5 (v/v). Analysis and documentation of PhastGels appeared as easy as with our conventional SDS-PAGE. Protein bands could reliably be identified by Western blotting. Urine and serum proteins, separated in PhastGels, were electrophoretically transferred to nitrocellulose and detected with specific antibodies against human albumin, transferrin, alpha-1-antitrypsin and IgG. Comparison of several standard kits for molecular weight determination revealed considerable differences concerning the quality of protein separation patterns. Availability of precast gels and automatization of SDS-PAGE and staining allows easy standardization of urine SDS-PAGE among clinical routine laboratories.     

Phosphoprotein electrophoresis in the presence of Fe(III) ions

Preparation of affinity polyacrylamide gels containing immobilized Fe(III) ions for the separation of proteins exhibiting metal ion binding properties is described. The presented method enables uniform distribution of immobilized metal ions in the affinity part of the polyacrylamide separating gel. Affinity gels prepared by this way are suitable to follow the effect of different concentrations of metal ions immobilized in polyacrylamide gel on a protein electrophoretic behavior. Polyacrylamide gels containing immobilized Fe(III) ions were used to study the electrophoretic behavior of two model proteins differing in their phosphate group content: chicken ovalbumin and bovine α‐casein. For the electrophoretic separation, both the native and the denaturating conditions were used.     

A versatile microfabricated platform for electrophoresis of double- and single-stranded DNA

We demonstrate a versatile microfabricated electrophoresis platform, incorporating arrays of integrated on-chip electrodes, heaters, and temperature sensors. This design allows a range of different sieving gels to be used within the same device to perform separations involving both single- and double-stranded DNA over distances on the order of 1 cm. We use this device to compare linear and cross-linked polyacrylamide, agarose, and thermo-reversible Pluronic-F127 gels on the basis of gel casting ease, reusability, and overall separation performance using a 100 base pair double-stranded DNA ladder as a standard sample. While cross-linked polyacrylamide matrices provide consistently high-quality separations in our system over a wide range of DNA fragment sizes, Pluronic gels also offer compelling advantages in terms of the ability to remove and reload the gel. Agarose gels offer good separation performance, however, additional care must be exercised to ensure consistent gel properties as a consequence of the need for elevated gel loading temperatures. We also demonstrate the use of denaturing cross-linked polyacrylamide gels at concentrations up to 19% to separate single-stranded DNA fragments ranging in size from 18 to 400 bases in length. Primers differing by 4 bases at a read length of 30 bases can be separated with a resolution of 0.9-1.0 in under 20 min. This level of performance is sufficient to conduct a variety of genotyping assays including the rapid detection of single nucleotide polymorphisms (SNPs) in a microfabricated platform. The ability to use a single microelectrophoresis system to satisfy a wide range of separation applications offers molecular biologists an unprecedented level of flexibility in a portable and inexpensive format.     

Prediction of migration behavior of oligonucleotides in capillary gel electrophoresis.

The influence of the primary structure (base composition) on the electrophoretic migration properties of single-stranded oligodeoxyribonucleotides in capillary polyacrylamide gel electrophoresis was investigated using homo- and heterooligomers under denaturing and non-denaturing conditions. Homooligodeoxyribonucleotides of equal chain lengths but of different base composition showed significant differences in mobility. In addition, the migration properties of heterooligomers were found to be highly dependent on their base composition. A simple equation is presented for predicting relative migration times using denaturing and non-denaturing polyacrylamide capillary gel electrophoresis. Orange-G was used as an internal standard and as the basis of the relative migration time calculations. Examples are presented using homo- and heterooligomers in the 10-20-mer range to show the correlation of the primary structure and their predicted and observed migration rates.     

Validation of capillary electrophoresis in the analysis of ewe's milk casein

Recent investigations have shown that capillary electrophoresis (CE) can be an alternative to other techniques such as polyacrylamide gel electrophoresis (PAGE) or sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) in the qualitative analysis and separation of the different casein fractions in cow's and ewe's milk. However, past work has not yet clarified whether that method can achieve good quantifications. The present study has used a commercial whole ovine casein standard and a mixture of the standard and whole casein extracted from ewe's milk cheese to test the reliability of the technique. The results show that CE was able to quantify the ewe's milk caseins. The areas under four of the most representative peaks on the electrophoretogram for two alpha and two beta-caseins (designated alpha-casein1CE, alpha-casein2CE, beta-casein1CE, and beta-casein2CE in order of elution) were used to validate the method. In relation to linearity, coefficient of determination (r2) values greater than 99% were obtained for the regressions of each of the caseins. Moreover, each casein yielded response factors with a relative standard deviation (R.S.D.) of less than or equal to 5. The coefficients obtained in the day-to-day reproducibility analysis were higher than those for the same-day repeatability, but all the values were within acceptable limits. In the study of accuracy, the percentage recovery rates for the alpha-casein fractions were higher than those for the beta-casein fractions, hence quantification of the latter using this technique would appear to be more accurate under the conditions employed.     

Determination of molecular weight of native proteins by polyacrylamide gradient gel electrophoresis

An improved method for the estimation of molecular weights of native proteins by polyacrylamide gel electrophoresis, in 9 cm x 9 cm x 0.05 mm 4-20% T fabric reinforced gradient gels, is described. Plotting the logarithm of the relative mobilities of proteins versus gel concentrations produces lines whose slopes are related to molecular weights.     

Formamide modified polyacrylamide gels for DNA sequencing by capillary gel electrophoresis.

Compressions are occasionally found during the separation of DNA sequencing fragments, particularly in G/C-rich regions and in gels operated at room temperature. Addition of at least 10% formamide to urea/polyacrylamide sequencing gels improves the denaturing capacity of the gel, minimizing compressions. Addition of 20% or more formamide decreases the separation rate, theoretical plate count, and resolution for normally migrating fragments. An optimum concentration of 10% formamide improves resolution of compressed regions without degrading the other characteristics of the gel. Operation of gels at room temperature simplifies the engineering associated with automated sequencers based on capillary gel electrophoresis.     

Application of Neuhoff's optimized Coomassie brilliant blue G-250/ammonium sulfate/phosphoric acid protein staining to ultrathin polyacrylamide gels on polyester films

An optimized Coomassie staining procedure, utilizing Coomassie Brilliant Blue G-250 in phosphoric acid/ammonium sulfate, was applied to ultrathin-layer isoelectric focusing in 0.18 mm polyacrylamide gels, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis in 0.38 mm polyacrylamide gels, both backed to Gel-Fix polyester supporting films. After isoelectric focusing staining of gelatin and acidic proteins was better with the phosphoric acid/ammonium sulfate procedure than with conventional organic solvent methods. When applied to gels after sodium dodecyl sulfate-polyacrylamide gel electrophoresis the sensitivity of the phosphoric acid/ammonium sulfate method was equal to that on conventional staining but lower than on silver staining.     

Detection of beta-glucanase activity on various beta-1,3 and beta-1,4-glucans after native and denaturing polyacrylamide gel electrophoresis.

beta-Glucanases were detected after polyacrylamide gel electrophoresis under native and denaturing conditions using various beta-1,3- and beta-1,4-glucans, including mixed glucans (laminarin, pachyman, carboxymethyl cellulose, lichenan and barley beta-glucan). After electrophoresis and incubation of gels, substrates incorporated into polyacrylamide gels were stained with specific fluorochromes, Sirofluor for beta-1,3 linkages and Calcofluor White M2R for beta-1,4 linkages. Under UV illumination, lysis zones appeared as dark bands against a fluorescent background. Enzymes of bacterial, fungal and plant sources could be revealed sequentially in gles containing mixed beta-(1,3)(1,4)-glucans by staining first with sirofluor followed by staining with Calcofluor White M2R. Active profiles were more diverse when substrates were stained with sirofluor. The use of purified sirofluor at pH 11.5 compared with Aniline Blue at pH 8.6 allowed better detection of beta-1,3-glucanase activities. In gels containing laminarin stained with sirofluor, bands exhibiting a more intense fluorescence than the background fluorescence were observed in addition to dark nonfluorescent bands. It is postulated that these two types of beta-1,3-glucanase activities differ by their enzymatic action (partial versus extensive hydrolysis). Analysis of fungal extracts using denaturing gels embedded with various beta-glucans displayed lysis bands migrating between 32 and 35 kDa.     

Separation and identification of photosynthetic antenna membrane proteins by high- performance liquid chromatography electrospray ionization mass spectrometry

Functional proteomics of membrane proteins is an important tool for the understanding of protein networks in biological membranes. Nevertheless, structural studies on this part of the proteome are limited. The present review attempts to cover the vast array of methods that have appeared in the last few years for separation and identification of photosynthetic proteins of thylakoid membranes present in chloroplasts, a good model for setting up analytical methods suitable for membrane proteins. The two major methods for the separation of thylakoid membrane proteins are gel electrophoresis and liquid chromatography. Isoelectric focusing in a first dimension followed by denaturing sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) in a second dimension is an effective way to resolve large numbers of soluble and peripheral membrane proteins. However, it is not applicable for isolation of native protein complexes or for the separation of highly hydrophobic membrane proteins. High-performance liquid chromatography (HPLC), on the other hand, is highly suitable for any type of membrane protein separation due to its compatibility with detergents that are necessary to keep the hydrophobic proteins in solution. With regard to the identification of the separated proteins, several methods are available, including immunological and mass spectrometric methods. Besides immunological identification, peptide mass fingerprinting, peptide fragment fingerprinting or intact molecular mass determination by electrospray ionization mass spectrometry (ESI-MS) or matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) have been shown to be very sensitive and effective. In particular, identification of proteins by their intact molecular mass is advantageous for the investigation of numerous biological problems, because it is rapid and reflects the full sequence of the protein and all its posttranslational modifications. However, intact molecular mass determinations of gel-separated membrane proteins are hampered due to the difficulties in extracting the hydrophobic proteins from the gel, whereas HPLC on-line interfaced with ESI-MS enables the rapid and accurate determination of intact molecular masses and consequently an unequivocal protein identification. This strategy can be viewed as a multidimensional separation technique distinguishing between hydrophobicity in the first dimension and between different mass-to-charge ratios in the second dimension, allowing the separation and identification even of isomeric forms.     

Preparative isoelectric focusing of reduced wheat gluten proteins

Proteins extracted from gluten of the bread wheat cultivar Fiorello 2 in the presence of 2-mercaptoethanol or dithiothreitol were separated by isoelectric focusing in a free solution in a pH 3-10 gradient containing 50% v/v 1-propanol or urea. The collected fractions were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis in 10% gels (high and medium molecular weight glutenin subunits) and 16% gels (low molecular weight gliadins). The isoelectric focusing pattern of gluten polypeptides in 50% v/v 1-propanol was comparable to that obtained on two-dimensional gel electrophoresis, based on isoelectric focusing and polyacrylamide gel electrophoresis or nonequilibrium pH gradient electrophoresis and polyacrylamide gel electrophoresis. A similar isoelectric focusing pattern was also observed when 3M urea was used as solvent. New gluten polypeptides, similar in mobility to the high molecular weight subunits of glutenin were detected at acidic pH.     

Polyacrylamide gradient gel electrophoresis of cytosolic retinol- and retinoic acid-binding proteins: application to rat testis and liver

Distribution and cellular levels of retinol-binding protein and retinoic acid-binding protein, involved in the molecular action of retinoids, were analyzed in rat testis and liver. Both binding proteins of cytosolic extracts were separated by linear-polyacrylamide gradient gel electrophoresis and following electrophoretic separation, could be visualized by complementary identification tests such as autoradiography and marker proteins. The concentration of the binding proteins were evaluated by scanning the polyacrylamide gradient gels and the resulting data were found to be in accordance with those obtained by counting radioactivities. Polyacrylamide gradient gel electrophoresis appears suitable to detect and quantitatively evaluate cytosolic retinol- and retinoic acid-binding proteins.     

Differences in the spatial and quantitative reproducibility between two second-dimensional gel electrophoresis systems

Two-dimensional polyacrylamide gel electrophoresis (PAGE), together with 2-D gel electrophoresis (GE) analysis software, is a common technique to analyze a complex proteome. In order to accurately locate the differentially expressed proteins in human pituitary macroadenoma tissues in our long-term research program to clarify the molecular mechanisms of macroadenoma formation, a reproducible separation system is needed. An immobilized pH-gradient dry gel-strip (IPG strip) has been extensively used for first-dimensional isoelectric focusing (IEF), and has achieved a high degree of reproducibility in the IEF direction. For the second dimension (SDS-PAGE), different types of gel systems are available, including horizontal vs. vertical gel systems, and gradient vs. constant-percentage gels. A typical horizontal system is the Multiphor II system that analyzes one gel at a time, using a precast gradient gel (180 x 245 x 0.5 mm), and a typical vertical system is the Dodeca system, which analyzes up to 12 gels at a time, using usually a single-concentration gel (190 x 205 x 1 mm). The present study evaluated the spatial and quantitative reproducibility of the two systems for the separation of the complex human pituitary proteome. PDQuest software was used to analyze the digitized gel-image data, and SPSS statistical software was used to analyze the data. The results demonstrated a high percentage (>99%) of protein-spot matches within each electrophoretic system. The Dodeca gel system demonstrated better between-gel reproducibility for spot position, higher resolution in the Sodium dodecyl sulfate (SDS)-PAGE direction, lower gel background, better spot quality, and higher reproducibility of the spot volume.     

In-gel deglycosylation of sodiumdodecyl sulfate polyacrylamide gel electrophoresis-separated glycoproteins for carbohydrate estimation by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Mass determination by mass spectrometric methods (electrospray ionization mass spectrometry (ESI-MS), matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS)) of sodiumdodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE)-separated proteins is a well known procedure and reliable protocols are available. In our efforts to use the established methods to determine the molecular mass of the disulfide bridged, heterodimeric glycoprotein GP3 and to determine the carbohydrate content of each protein subunit we developed an in-gel chemical deglycosylation method. For this purpose we established experimental conditions that allow maximum extraction of the high molecular mass protein subunits and developed a routine method to apply the HF-pyridine deglycosylation protocol to proteins isolated from polyacrylamide gel pieces. The novel protocol and extraction procedure described can be used to analyze O-glycosylated proteins up to 150 kDa after SDS-PAGE separation.     

Electrospray mass spectra from protein electroeluted from sodium dodecylsulfate polyacrylamide gel electrophoresis gels

Electrospray ionization/tandem mass spectrometry of proteins separated on sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) gels is severely limited by the requirement that the protein be completely separated from the SDS. As shown here, the gaseous noncovalent SDS adducts of protonated proteins thus formed can be dissociated by infrared irradiation. ESI spectra from myoglobin in SDS-containing solutions show molecular ions adducted with up to 15 dodecyl sulfates, but ir irradiation of these ions causes complete dissociation to expel the SDS.