石英晶体微天平用于微囊藻毒素在聚合物涂覆的金片表面吸附

合成了具有不同功能化的聚苯乙烯树脂,利用石英晶体微天平对树脂和微囊藻毒素相互吸附作用进行实时监测和研究．研究发现,吸附的pH和表面性质对于吸附量有重要的影响,而温度影响不大,中性pH氨基树脂对微囊藻毒素的吸附效果最好.     

表面引发的DNA杂交链式反应的石英晶体微天平研究

通过石英晶体振荡技术研究了杂交链式反应这种核酸扩增的方法. 石英晶体微天平可以表征在晶体和溶液的界面上的DNA层, 并获得粘性穿透深度这一重要参数. 根据石英晶体表面吸附质量和振荡频率之间的关系, 我们测量了表面引发的杂交链式反应的动力学过程, 并获得界面上的粘度、剪切模量等参数. 这一工作为研究固液界面上核酸反应过程, 特别是杂交链式反应的机制提供了新的途径.     

阴离子、阳离子和非离子表面活性剂在纳/微米草酸钙晶体上的吸附差异

研究了尺寸分别为50 nm和3μm的一水草酸钙(COM)和二水草酸钙(COD)晶体对不同电荷表面活性剂的吸附差异,包括阴离子型表面活性剂磺基琥珀酸钠二辛酯(AOT)、阳离子型表面活性剂十六烷基三甲基溴化铵(CTAB)和非离子型表面活性剂壬基酚聚氧乙烯醚(NP-40),探究了尿液中带不同电荷的分子对纳米、微米尿微晶的影响。结果表明,表面活性剂的吸附量大小为AOTCTABNP-40,即阴离子型表面活性剂的吸附量最大,非离子型表面活性剂的吸附量最小;晶体尺寸相同时,COM的吸附能力稍大于COD;吸附表面活性剂后,晶体表面的ζ电位绝对值都增大,有利于抑制晶体的团聚和沉降。提出了晶体吸附不同表面活性剂的分子模型。不同电荷表面活性剂与纳/微米COM、COD晶体之间存在不同的相互作用。表面活性剂吸附量越大,沉降越慢,对晶体悬浮液的稳定效果越明显。     

石英晶体微天平中耗散与阻抗分析法的统一

石英晶体微天平仪（quartz crystal microbalance,QCM）就是通过检测物质在石英晶片表面上吸附前后石英晶片共振性能的变化以得到吸附物质的量和一些物理性能。石英晶体微天平仪具有非常高的灵敏度,可以测到纳米级的薄膜厚度变化和纳克级的痕量物质质量的变化,广泛应用于科学研究各个领域中,特别是薄膜质量、厚度的测量,生物、化学传感器以及微量物质在表面的吸附过程研究。     

耗散型石英晶体微天平在生物医用高分子材料中的应用

石英晶体微天平(QCM)是一种基于石英晶体压电效应的分析检测技术,可实时在线提供石英晶体表面吸附层质量、厚度、粘弹性等信息,由此获得表面分子相互作用关系。 耗散型石英晶体微天平(QCM-D)因其独特的对粘弹性的解析,使其在高分子材料中的应用迅速发展,尤其是生物医用高分子材料领域,已用来评价生物医用高分子材料的表界面相互作用,力学和生物相容性等。 本文简单介绍了耗散型石英晶体微天平的基本原理及理论模型,重点综述了近几年QCM-D在高分子链构象、蛋白质吸附、生物大分子相互作用、药物释放以及水凝胶中的应用,并且展望了QCM-D的未来发展趋势。     

硫酸溶液中Pt电极表面过程的EQCM研究

应用电化学循环伏安和石英晶体微天平(EQCM)方法研究了0.1mol·L-1硫酸溶液中Pt电极表面的吸附和氧化过程.从电极表面质量变化的结果分析,可认为正向电位扫描时氢区表面质量的增加是由于水分子取代Had引起的,而双电层区的质量增加则是由于水的吸附模式逐渐由氢端吸附转向氧端吸附所致.根据频率变化和电量数据,进一步推算出水在双电层区是以低放电吸附形式出现的,1molPt原子和水分子只发生0.054mol的电荷转移.本文结果可为认识Pt电极表面过程提供定量的新数据.     

石英晶体微天平实时监测低密度脂蛋白在胆固醇修饰葡聚糖上的吸附及其动力学研究

利用石英晶体微天平实时监测低密度脂蛋白(LDL)在胆固醇修饰葡聚糖(CMD)上的吸附,并对其吸附动力学进行研究.结果表明,CMD与LDL之间的相互作用符合Langmuir吸附方程,当LDL浓度(ng/μL)为9.9,12.38和14.14时,其吸附平衡常数[K/(mol·L-1·s-1)]分别为0.0477,0.0536和0.0628,表面吸附量(ng/cm2)分别为107.6,139.6和167.9.最大吸附量达到284.8ng/cm2,吸附率为72.91%.     

阴离子、阳离子和非离子表面活性剂在纳/微米草酸钙晶体上的吸附差异

目的：研究尺寸分别为50 nm和3 μm的一水草酸钙（COM）和二水草酸钙（COD）晶体对不同电荷表面活性剂的吸附差异,包括阴离子型表面活性剂磺基琥珀酸钠二辛酯（AOT）、阳离子型表面活性剂十六烷基三甲基溴化铵（CTAB）和非离子型表面活性剂壬基酚聚氧乙烯醚（NP-40）,探究尿液中带不同电荷的分子对纳米、微米尿微晶的影响。方法：测定不同表面活性剂在纳/微米COM、COD晶体上的吸附量;采用ζ电位仪测定吸附不同表面活性剂后晶体表面的ζ电位;检测加入不同表面活性剂后悬浮液的沉降系数。结果：表面活性剂的吸附量大小为AOT > CTAB > NP-40,即阴离子型表面活性剂的吸附量最大,非离子型表面活性剂的吸附量最小;晶体尺寸相同时,COM的吸附能力稍大于COD;吸附表面活性剂后,晶体的ζ电位绝对值都增大,有利于抑制晶体的团聚和沉降。提出了晶体吸附不同表面活性剂的分子模型。结论：不同电荷表面活性剂与纳/微米COM、COD晶体之间存在不同的相互作用。表面活性剂吸附量越大,沉降越慢,对晶体悬浮液的稳定效果越明显。     

N掺杂TiO2纳米膜吸附胆红素分子的石英晶体微天平研究

以柠檬酸催化溶胶-凝胶法合成了晶粒尺寸为16.9 nm的锐钛矿型N掺杂TiO2(N-TiO2)纳米颗粒,并用旋转涂膜法制备了N-TiO2纳米薄膜.采用石英晶体微天平(QCM)技术研究了胆红素在纳米N-TiO2膜表面的吸附动力学行为,考察了缓冲溶液pH、硅烷亲脂试剂三甲基氯硅烷及金属离子修饰纳米N-TiO2膜对胆红素吸附...     

阳离子和两性表面活性剂对石英表面润湿性的影响

利用座滴法研究了阳离子表面活性剂十六烷基醚羟丙基季铵盐(C16PC)和两性离子表面活性剂十六烷基醚羟丙基羧酸甜菜碱(C16PB)溶液在石英表面上的润湿性质, 考察了表面活性剂类型及浓度对接触角的影响趋势, 讨论了黏附张力和黏附功的变化规律. 研究发现, 两种表面活性剂在高能的石英表面的吸附造成石英-水的界面自由能(γsl)增大. C16PB通过弱相互作用随机吸附到石英表面, 其增大γsl的能力与降低表面张力(γ1g)的能力相当, 接触角(θ)随浓度变化不大. C16PC 随体相浓度增大能够在石英表面通过静电作用形成定向排列的单分子层, 而后在临界胶束浓度(cmc)附近形成双层结构, 接触角随浓度变化的趋势可分为4个区域, 并通过一个极大值.     

Heat of adsorption of surfactants and its role on nanoparticle stabilization

In this work, the binding between sodium oleate (SO), sodium laurate (SL), sodium dodecyl sulfate (SDS), and sodium dodecylphosphonate (SDP) and iron oxide nanoparticles was systematically investigated using isothermal titration calorimetry (ITC). Comparing the heat exchanged during the isothermal titration with the corresponding surfactant adsorption isotherm, in the cases of SO and SDP, a strong binding takes place at low surfactant concentrations. The binding enthalpy at this low surfactant concentrations depends on the type of surfactant anionic head group. For C12 surfactants, the phosphonate group produced the strongest endothermic binding, followed by the exothermic binding with the carboxylate group, followed by weak exothermic interaction with the sulfate group. For carboxylate surfactants, longer surfactant tails result in larger exothermic binding. Surfactants that exhibited large binding enthalpies also produced more stable suspensions. The Langmuir (L), Freundlich (F), and Langmuir–Freundlich (L–F) adsorption models were used to interpret the adsorption isotherms during the titration with sodium oleate. The L–F adsorption isotherm model was selected to calculate the heat of the formation of the SO monolayer and bilayer on the iron oxide nanoparticles. The L–F model reflects the finite or limited adsorption of the Langmuir model, but accounts for non-homogeneous adsorption of the Freundlich model that help account for surfactant self-assembly before and after adsorption. Coupling the adsorption model with the titration data is possible to calculate the real heat of adsorption of the surfactants on the metal oxide.     

阴、阳离子表面活性剂混合体系在硅胶/水及硅胶/矿化水界面上的吸附

研究阴、阳离子表面活性剂混合体系(十二烷基氯代吡啶,辛基磺酸钠,辛基三乙基溴化铵/十二烷基苯磺酸钠)在硅胶,纯水和硅胶,矿化水界面上的吸附作用,探讨阴(阳)离子表面活性剂的存在对阳(阴)离子表面活性剂吸附作用的影响．结果表明,阴离子表面活性剂的存在基本不影响阳离子表面活性剂在带负电固体表面的吸附;而阳离子表面活性剂的存在却使本来吸附量就不大的阴离子表面活性剂在带负电的固体表面上不再吸附．在矿化水中阳离子表面活性剂的吸附量比在纯水中明显降低．从硅胶表面吸附机制解释了所得结果．     

The Surface and Thermodynamic Properties of Ethoxylated Sodium Monoalkyl Sulfosuccinate Surfactants

A series of ethoxylated sodium monooctyl sulfosuccinates [E(n)SMOSS] and ethoxylated sodium monolauryl sulfosuccinates [E(n)SMLSS] have different units of ethylene oxide (n = 9, 14, 23) were synthesized. The surface and thermodynamic properties of these surfactants have been compared with sodium dioctyl sulfosuccinate surfactant (SDOSS) as a commonly used surfactant. The surface tension measurements at 25, 35, 45, and 55°C were used to determine of the critical micelle concentration (CMC) and surface active properties of these surfactants. The effect of the ethylene oxide (EO) unit and the alkyl chain length on the surface properties for the prepared surfactants was studied. The results show that the ethoxylated sodium monoalkyl sulfosuccinates generally have lower values of CMC than that of sodium dioctyl sulfosuccinate. The values of surface active parameters indicate that the ethoxylated sodium monooctyl sulfosuccinates and ethoxylated sodium monolauryl sulfosuccinates surfactants have adsorption properties better than the sodium dioctyl sulfosuccinate surfactant as a resulted presence of ethylene oxide in molecules of the prepared surfactants. The thermodynamic parameters show that the (EO) unites in the chemical structure of ethoxylated sodium monoalkyl sulfosuccinate surfactants improve their micellization and adsorption properties.     

Sorption of 2,4-dichlorophenol on modified hydrotalcites

The adsorption of anionic surfactants (sodium dodecyl sulfate (SDS) and sodium bis[2-ethylhexil]sulfosuccinate (AOT)) on hydrotalcite (HT) and the adsorption of 2,4-dichlorophenol (DCP) on HT and its modified forms from aqueous solutions was studied. The modification was carried out by calcinations (heat treatment) and hydrophobization using different anionic surfactants. The anionic surfactant isotherms were of the H-type. It was assumed that first the ion exchange mechanism takes place until approximately the anion exchange capacity of HT is reached and hereafter, the hydrophobic mechanism occurs forming surfactant bilayers. While the DCP adsorption was very poor on HT, significant uptake of DCP took place on calcined HT which was attributed to the simultaneously occurring rehydration and adsorption during the reconstruction of the layered structure. On anionic surfactant-HT complexes (“organo-hydrotalcites”) DCP was considerably adsolubilized in the anionic surfactant layers intercalated in HT. The AOT–HT complex appeared the more effective adsorbents for DCP.     

Molecular perspective on diazonium adsorption for controllable functionalization of single-walled carbon nanotubes in aqueous surfactant solutions

Functionalization of single-walled carbon nanotubes (SWCNTs) using diazonium salts allows modification of their optical and electronic properties for a variety of applications, ranging from drug-delivery vehicles to molecular sensors. However, control of the functionalization process remains a challenge, requiring molecular-level understanding of the adsorption of diazonium ions onto heterogeneous, charge-mobile SWCNT surfaces, which are typically decorated with surfactants. In this paper, we combine molecular dynamics (MD) simulations, experiments, and equilibrium reaction modeling to understand and model the extent of diazonium functionalization of SWCNTs coated with various surfactants (sodium cholate, sodium dodecyl sulfate, and cetyl trimethylammonium bromide). We show that the free energy of diazonium adsorption, determined using simulations, can be used to rank surfactants in terms of the extent of functionalization attained following their adsorption on the nanotube surface. The difference in binding affinities between linear and rigid surfactants is attributed to the synergistic binding of the diazonium ion to the local "hot/cold spots" formed by the charged surfactant heads. A combined simulation-modeling framework is developed to provide guidance for controlling the various sensitive experimental conditions needed to achieve the desired extent of SWCNT functionalization.     

Adsorption of surfactants on superfine magnetite

Superfine magnetite particles were obtained by chemical condensation. Their size can be varied by the magnetic field application and a change in the crystallization temperature. The X-ray diffraction and adsorption data suggested an increase in the crystallite size and a decrease in the value of limiting adsorption and specific area of magnetite with an increase in the temperature and magnetic field intensity. The nature of surfactants and solvents has a substantial effect on the adsorption process. The IR spectroscopic and equilibrium adsorption data showed that oleic acid has the highest affinity to the surface among the surfactants studied (stearic, oleic, and linoleic acids and sodium oleate). On going from carbon tetrachloride to hexane, the value of limiting adsorption of oleic acid decreases.     

Adsorption of nonionic mixtures at the air-water interface: effects of temperature and electrolyte

Specular neutron reflection has been used to investigate the effects of temperature and added electrolyte on the adsorption of nonionic surfactants and nonionic surfactant mixtures at the air-water interface. For the alkyl poly-oxyethylene oxide nonionic surfactants, C(n)EO(m), the adsorption at the air-water interface is independent of temperature for surfactants with shorter ethylene oxide groups, whereas there is an increasing tendency for increased adsorption with temperature for surfactants with longer ethylene oxide groups. The addition of "salting in" (sodium thiocyanate, NaSCN) and "salting out" (sodium chloride, NaCl, sodium sulphate, Na2SO4) electrolyte results in reduced and enhanced adsorption, respectively, for C12EO8, whereas both types of electrolyte result in enhanced adsorption for C12EO12. The addition of electrolyte does not substantially alter the temperature dependence of the adsorption of the pure monolayers. For the nonionic mixtures of C12EO3/C12EO8 increasing temperature results in a surface richer in the least surface-active component, C12EO8. For the same nonionic mixture, the addition of "salting in" and "salting out" electrolyte results in an reduced and increased adsorption, respectively. The addition of "salting in" electrolyte results in a surface more rich in C12EO3, whereas for the addition of both "salting in" and "salting out" electrolyte the surface composition is essentially unaltered.     

Regarding the effect that different hydrocarbon/fluorocarbon surfactant mixtures have on their complexation with HSA

The complexations between human serum albumin (HSA) and the sodium perfluorooctanoate/sodium octanoate and sodium perfluorooctanoate/sodium dodecanoate systems have been studied by a combination of electrical conductivity, ion-selective electrode, electrophoresis, and spectroscopy measurements. The binary mixtures of the surfactants deviated slightly from ideality. Binding plots revealed the existence of two specific binding sites, the first site being more accessible than the second. Positive cooperative binding has been found, thus revealing the importance of the hydrophobic interactions in both kinds of surfactants. The Gibbs energies of binding per mole of surfactant (DeltaG(nu)) were calculated from the Wyman binding potential where, on the basis of the elevated number of binding sites, a statistical contribution has been included. Initially these energies are large and negative, gradually decreasing as saturation is approached. Changes in the slope of Gibbs energies have been identified with the saturation of the first binding set. These facts denote that the surfactants under study have different favorite adsorption sites along the protein and that the adsorption process of perfluorooctanoate is more closely followed by dodecanoate than by octanoate. Finally, electrophoresis and spectroscopy measurements suggest induced conformational changes on HSA depending on the surfactant mixture as well as the mixed ratio.     

Adsorption of surfactants onto acrylic ester resins with different pore size distribution

In this study, a series of acrylic ester resins with different pore size distribution were prepared successfully by varying the type and the amount of pore-forming agents. In order to inves-tigate the adsorption behavior and mechanism of surfactants on acrylic ester resins, three kinds of surfactants were utilized as adsorbates that were sodium 6-dodecyl benzenesulfonate (6-NaDBS), sodium 1-dodecyl benzene sulfonate (1-NaDBS) and sodium 1-dodecyl sulfonate, respectively. It was observed that the surface area was available in a particular pore size and an appropriate pore size of resins appeared to be more important for the adsorption of surfactants. As compared to commercial acrylic ester resins XAD-7 and HP2MG, 50# and 38# resins exhibited more excellent adsorption properties toward 1-NaDBS and 6-NaDBS. The experimental equilibrium data were fitted to the Langmuir, and double-Langmuir models. Two models provided very good fittings for all resins over the temperature range studied. The investigation indicated that electrostatic attraction and hydrogen bond between resins and surfactants were the main forces and had an obvious effect on adsorption proc-ess.     

Effect of ionic surfactants on bauxite residues suspensions viscosity

Measurement of the rheological property of bauxite residue sample received from an Australian alumina refinery, treated with a number of cationic and anionic surfactant in laboratory has been carried out using a Brookfield viscometer for the assessment of the effect of surfactants on the residue viscosity. Sodium laurate, prepared with an excess of sodium hydroxide, was found to be effective while direct addition of anionic surfactants (lauric acid and sodium laureth sulphate) and cationic (cetyl trimethyl ammonium bromide) produce only moderate effect on the red mud suspension apparent viscosity at 65 degrees C. The experimental data appear to confirm the crucial role of the cation sodium in the process of adsorption of anionic surfactants on the flocculated red mud particles.