Crystallization and aggregation behaviors of calcium carbonate in the presence of poly(vinylpyrrolidone) and sodium dodecyl sulfate

An anionic surfactant interacts strongly with a polymer molecule to form a self-assembled structure, due to the attractive force of the hydrophobic association and electrostatic repulsion. In this crystallization medium, the surfactant-stabilized inorganic particles adsorbed on the polymer chains, as well as the bridging effect of polymer molecules, controlled the aggregation behavior of colloidal particles. In this presentation, the spontaneous precipitation of calcium carbonate (CaCO3) was conducted from the aqueous systems containing a water-soluble polymer (poly(vinylpyrrolidone), PVP) and an anionic surfactant (sodium dodecyl sulfate, SDS). When the SDS concentrations were lower than the onset of interaction between PVP and SDS, the precipitated CaCO3 crystals were typically hexahedron-shaped calcite; the increasing SDS concentration caused the morphologies of CaCO3 aggregates to change from the flower-shaped calcite to hollow spherical calcite, then to solid spherical vaterite. These results indicate that the self-organized configurations of the polymer/surfactant supramolecules dominate the morphologies of CaCO3 aggregates, implying that this simple and versatile method expands the morphological investigation of the mineralization process.     

Nanoparticle formation of poorly water-soluble drugs from ternary ground mixtures with PVP and SDS

Poorly water-soluble drugs N-5159, griseofulvin (GFV), glibenclamide (GBM) and nifedipine (NFP) were ground in a dry process with polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS). Different crystallinity behavior of each drug during grinding was shown in the ternary Drug/PVP/SDS system. However, when each ternary Drug/PVP/SDS ground mixture was added to distilled water, crystalline nanoparticles which were 200 nm or less in size were formed and had excellent stability. Zeta potential measurement suggested that the nanoparticles had a structure where SDS was adsorbed onto the particles that were formed by the adsorption of PVP on the surface of drug crystals. Stable existence of crystalline nanoparticles was attributable to the inhibition of aggregation caused by the adsorption of PVP and SDS on the surface of drug crystals. Furthermore, the electrostatic repulsion due to the negative charge of SDS on a shell of nanoparticles could be assumed to contribute to the stable dispersion.     

用反相离子对色谱分离和检测水溶性维生素——十二烷基磺酸钠作离子对试剂

本文使用十二烷基磺酸钠(SDS)作离子对试剂,研究了用反相离子对色谱法对混合水溶性维生素的检测和分离,确定了最佳实验条件,包括SDS浓度,pH值,甲醇与水的配比,三乙胺浓度及柱温等。用本方法对九种混合水溶性维生素〔B_1,B_2,B_5(烟酰胺和烟酸),B_6(吡哆醛和吡哆醇),B_(11),B_(12)和C〕的标样和西瓜汁的分离表明,在所选定的实验条件下,可于10min内一次分离。     

Influence of Surfactant-polymer Complexes on Crystallization and Aggregation of CaCO3

Hollow calcium carbonate(CaCO₃) microspheres with different morphologies were synthesized via the precipitation reaction of calcium chloride with sodium carbonate in the presence of different surfactant-polymer complexes. The selected anionic surfactants were sodium dodecyl sulfonate(SDS) and sodium dodecyl benzenesulfonate(SDBS), respectively. The selected water-soluble polymers were polyacrylic acid(PAA) and polyvinyl pyrrolidone(PVP). In this work, SDS-PVP “pearl-necklace model” micellar complex was formed via hydrophobic effectiveness between SDS and PVP and it served as the spherical template to generate spherical CaCO₃ aggregates with hollow microspheres composed of about 500 nm irregular shaped particles. SDS-PAA complexes and SDBS-PAA complexes formed “core-shell model” aggregates with calcium ions serving as the medium to link the anionic surfactant and the polymer. SDS-PAA “core-shell model” aggregates would act as templates for hollow CaCO₃ microspheres consisting of 30-50 nm irregular shaped crystallites. SDBS-PAA “core-shell model” aggregates served as the spherical aggregate templates to generate spherical CaCO₃ aggregates consisted of many small spherical particles which had grown together. All the obtained CaCO₃ hollow microspheres are calcite particles. This research may provide new insight into the control of morphologies of hollow CaCO₃ microspheres in the presence of surfactant- polymer complexes.     

Characteristics of microemulsion polymerized styrene with water-soluble versus oil-soluble initiators

The effect of oil-soluble versus water-soluble free-radical generators in the polymerization of styrene in oil-in-water (O/W) micromulsions were investigated by photon correlation spectroscopy. The microemulsions were formed by styrene, brine, sodium dodecyl sulfate (SDS), and pentanol. The polymerizations were carried out in two microemulsions that contained droplets differing by a factor of 2.4 in volume. Under the conditions of ? = 0.019 and NaCl/SDS > 2 the microemulsions were stable and the droplets were independent of one another. Both oil-soluble and water-soluble initiators produced polystyrene that contained fractions of two different sizes. In the case of the oil-soluble initiator the droplet size in the microemulsion seemed to be correlated to the size of the product whereas in the case of the water-soluble initiator, there seemed to be little relation.     

Growth Mechanism of Large Monodispersed Silica Particles Prepared from Tetraethoxysilane in the Presence of Sodium Dodecyl Sulfate

Monodispersed silica particles up to ca. 1.2 μm in diameter were prepared by hydrolysis of tetraethoxysilane in the presence of sodium dodecyl sulfate (SDS). The particle size was increased with an increase of SDS added. The geometrical standard deviation of the particles was decreased with an increase of SDS. In the earlier reaction stage, double spherical particles by the coalescence of the particles were frequently observed when large amounts of SDS were added. Particle size was gradually increased after the coalescence occurred and spherical particles were finally obtained. The results of Nielsen’s chronomal analysis suggest that the polynuclear layer growth took place after the coalescence of the particles in the presence of larger amount of SDS.     

Double phase inversion of emulsions containing layered double hydroxide particles induced by adsorption of sodium dodecyl sulfate

A liquid paraffin-water emulsion was investigated using layered double hydroxide (LDH) particles and sodium dodecyl sulfate (SDS) as emulsifiers. Both emulsifiers are well-known to stabilize oil-in-water (o/w) emulsions. Surprisingly, a double phase inversion of the emulsion containing LDH particles is induced by the adsorption of SDS. At a constant LDH concentration, the emulsion is o/w type when SDS concentrations are low. At intermediate SDS concentrations, the first emulsion inversion from o/w to w/o occurs, which is attributed to the enhanced hydrophobicity of LDH particles caused by the desorption of the second layer of surfactant, leaving a densely packed SDS monolayer on the LDH exterior surfaces. The second inversion from water-in-oil (w/o) to o/w occurs at higher SDS concentrations, which may be due to the competitive adsorption at the oil/water interfaces between the LDH particles modified by the SDS bilayers and the free SDS molecules in the bulk solution, but the free SDS molecules dominate and determine the emulsion type. Laser-induced fluorescent confocal micrographs clearly confirm the adsorption of LDH particles on the surfaces of the initial o/w and intermediate w/o emulsion droplets, whereas no LDH particles were adsorbed on the final o/w emulsion droplet surfaces. Also, transmission electron microscopy (TEM) observations indicate that the shape of the final o/w emulsions is similar to that of the monomeric SDS-stabilized emulsion but different from that of the initial o/w emulsions. The adsorption behavior of SDS on LDH particles in water was investigated to offer an explanation for the emulsion double phase inversion. The zeta potential results show that the particles will flocculate first and then redisperse following surfactant addition. Also, X-ray diffraction (XRD) measurements indicate that SDS adsorption on the LDH interior surfaces will be complete at intermediate concentrations.     

Effects of surfactants on the phase transition of poly(N-isopropylacrylamide) in water

The effects of both anionic (sodium dodecyl sulfate, SDS) and cationic (dodecylpyridine bromide, DPB) surfactants on the phase transition of narrowly distributed poly(N-isopropylacrylamide) (PNIPAM) microgel particles were investigated by laser light scattering. The addition of SDS swells the particles and increases the phase transition temperature, while DPB has a much smaller effect. This difference cannot be due to an association between the surfactant hydrophobic tail and PNIPAM because DPB and SDS have an identical hydrophobic tail. The amide groups in PNIPAM are slightly protonized in deionized water (pH ∼ 5.5). Our results contradict a previous prediction that oppositely charged surfactants will collapse a polyelectrolyte gel. After adding SDS, a two-step phase transition of the PNIPAM gel is observed. This suggests that SDS forms micelles inside the microgel with the help of the immobilized counter ions on the gel network. The SDS micelles are broken into individual SDS molecules in the first step of phase transition, while in the second step individual SDS molecules are gradually expelled. Surfactant effects on the microgel particles are compared with those of individual PNIPAM chains. © 1996 John Wiley & Sons, Inc.     

Preparation of hollow polymer particles with a single hole in the shell by SaPSeP

The influence of sodium dodecyl sulfate (SDS) on the shell formation of hollow polymer particles prepared by the SaPSeP method, which was proposed by the authors for the preparation of micrometer-sized hollow polymer particles, was investigated. A single hole was observed in the shell of the hollow particles prepared by seeded polymerization of micrometer-sized, monodisperse divinylbenzene/p-xylene droplets in aqueous medium in the presence of SDS at concentrations above 43.3 mM, which were prepared by the dynamic swelling method. The fraction of the hollow particles having a single hole in the shell and the area of the hole increased with the SDS concentration.     

The thermodynamic stability of the mixtures of hyperbranched poly(ethyleneimine) and sodium dodecyl sulfate at low surfactant-to-polyelectrolyte ratios

The equilibrium nature of the association between the hyperbranched poly(ethyleneimine) (PEI) and sodium dodecyl sulfate (SDS) has been investigated in the presence of excess polyelectrolyte. It was found that the thermodynamic stability of the system considerably depends on the ionization degree of the PEI molecules. In the case of slightly charged PEI molecules, the PEI/SDS mixtures are thermodynamically stable solutions in the pre-precipitation concentration range. In contrast, at low and moderate pH kinetically stable colloidal dispersions of the positively charged PEI/SDS particles can be observed at low surfactant-to-polyelectrolyte ratios. These dispersions are stabilized by the uncompensated charges of the PEI molecules. In addition to the primary PEI/SDS particles, larger aggregates may also appear in the mixtures. The higher the protonation degree of the PEI molecules and the smaller the net charge of the primary PEI/SDS particles, the more likely the aggregate formation becomes.     

Dispersion polymerization of styrene: Effect of surfactant

The influence of poly(vinyl alcohol) (PVA), a steric stabilizer, and sodium dodecyl sulfate (SDS), an electrostatic stabilizer, on the stability of styrene dispersion polymerized systems was studied. It was shown that in stabilization by PVA there was pronounced bridging of the submicron emulsion particles to 10-μ dispersion particles and that the emulsion particles could not be washed off. In SDS stabilization, on the other hand, the emulsion formed was easily washed off because bridging with SDS does not occur. The surface tension of the aqueous phase measured during polymerization showed different characteristics for stable and unstable systems.     

孪尾疏水缔合水溶性共聚物聚(丙烯酰胺/丙烯酸钠/N,N-二己基丙烯酰胺)/十二烷基硫酸钠水溶液的粘度行为

水溶性三元共聚物;孪尾疏水缔合水溶性共聚物聚(丙烯酰胺/丙烯酸钠/N;N-二己基丙烯酰胺)/十二烷基硫酸钠水溶液的粘度行为     

Coil-to-globule-type transition of poly(N-isopropylacrylamide) adsorbed on colloidal silica particles

 The temperature dependence of the dimensions of poly(N-isopropylacrylamide) (PNIPAM) adsorbed on two different colloidal silica particles was studied with dynamic light scattering. The hydrodynamic diameter was measured when the temperature was varied stepwise from 10 to 60 °C. PNIPAM molecules free in solution undergo a conformational transition at the θ temperature. We have found that PNIPAM adsorbed onto silica particles also undergoes a transition below the θ temperature. When a small amount of polymer was adsorbed the coil-to-globule transition at the θ temperature did not occur. Potentiometric titrations showed that the surface charge of the silica particles was not affected by the polymer adsorption. Sodium dodecyl sulfate (SDS) (100–1200 mg/l) was added to improve the stability. The particles with a higher zeta potential required a smaller addition of SDS to prevent coagulation compared to the particles with a smaller surface potential. For low additions of SDS the transition curves of adsorbed PNIPAM were unaffected. For larger additions of SDS the collapse of PNIPAM was shifted to higher temperatures. When as much as 1200 mg/l SDS was added, two regions with weak transitions were observed before the collapse. It was also observed that the presence of SDS results in a smaller adsorption of PNIPAM onto the particles. The addition of SDS strongly increased the magnitude of the electrophoretic mobility of the polymer–particle unit. From the electrophoretic measurements an electrokinetic layer thickness was calculated and it was found to be smaller than the corresponding hydrodynamic layer thickness, as obtained by dynamic light scattering. Received: 14 December 1999/In revised form: 22 February 2000/Accepted: 6 March 2000     

Competitive adsorption of an anionic and a nonionic surfactant on polystyrene latex particles as monitored by small x-ray scattering

Adsorption of the anionic surfactant sodium dodecylsulfate (SDS) as well as competitive adsorption of SDS with the nonionic surfactant Triton X-405 on a polystyrene latex has been examined by the use of small-angle x-ray scattering (SAXS). Since the latex particles only have a low contrast towards water whereas the electron densities of the added surfactants are rather high, their gradual adsorption can be monitored with good sensitivity. The particles covered with SDS have been investigated by the contrast variation method. A distinct core-shell structure has been observed. After maximum coverage of the surface is reached, the additional surfactant forms free micelles. The analysis presented here allows the simultaneous investigation of the covered particles and the free micelles. This is due to their respective characteristic scattering contributions in different angular ranges. Information on the competitive adsorption could be obtained by analyzing the structure of the coated particles and the composition of the free mixed micelles. The adsorption is shown to be an equilibrium process where adsorption of the nonionic component is found to be much stronger than of the SDS molecules.     

Kinetic aspects of styrene minisuspension polymerization using a mixture PVA-SDS as stabilizer: Effect of the time of addition of SDS

The styrene minisuspension polymerization at 70 °C using AIBN as initiator and Polyvinil alcohol (PVA) and mixture PVA-sodium dodecil sulfate (SDS) as stabilizers was studied focusing on the kinetic behavior of the process after the SDS was added (PVA is present from the beginning and SDS is added at a given time t_SDS). It was confirmed that the addition of SDS to the system initially stabilized with PVA highly enhances the colloidal stability of the polymer particles because of the association formed between SDS and PVA molecules. It was observed that when SDS is added the rate of polymerization, the average molecular weight and final latex viscosity increase. The earlier the addition of SDS the more marked these increments. This behavior is explained in terms of the colloidal stability of the particles formed via emulsion polymerization and its effect on kinetic aspects such as the evolution of molecular weight and particle size distributions during the minisuspension polymerization.     

Elimination of adsorption effects in the analysis of water-soluble vitamins in pharmaceutical formulations by capillary electrophoresis.

A tendency to an increase in migration times was observed when different water-soluble vitamins were analysed repeatedly in pharmaceutical preparations by capillary electrophoresis. In order to better understand the origin of this effect, the influence of the vitamins and the excipients, such as cellulose derivatives, was investigated. These studies indicated that the increase in analyte migration times was most probably due to the adsorption of different kinds of constituents to the capillary wall. Different rinsing procedures were tested in order to eliminate these unfavourable effects. A rinse of the capillary with a 25 mM sodium dodecyl sulfate (SDS) solution in the running buffer between successive runs was found to be particularly effective when the analysis was performed by free solution capillary zone electrophoresis (CZE). When the vitamins were determined by micellar electrokinetic chromatography (MEKC) using SDS as surfactant, a short capillary rinse with the running buffer was sufficient to obtain reproducible migration times. The CZE and MEKC methods developed were validated and compared. Both methods could be applied to the determination of water-soluble vitamins in different multivitamin formulations.     

离子液体[BMim]BF4对SDS水溶液表面活性和聚集能力的促进

采用表面张力测定法和核磁共振谱等方法研究了阴离子表面活性剂十二烷基硫酸钠(SDS)在水溶性室温离子液体[BMim]BF4/水混合溶剂中的表面性质及聚集行为, 发现极少量[BMim]BF4的介入就可以显著降低SDS的临界胶束浓度, 提高体系的表面活性; 且[BMim]BF4在混合溶剂中所占的摩尔分数(x1)在一定范围内(0相似文献   

Characterization of silicone oil emulsions stabilized by TiO2 suspensions pre-adsorbed SDS

To study the effects of pre-adsorbed emulsifier on Pickering emulsion stability, the preparation of silicone oil emulsions by TiO₂ suspensions pre-adsorbed sodium dodecyl sulfate (SDS) at the fixed TiO₂ concentration of 0.15 g was carried out below a fiftieth of critical micelle concentration (cmc) of SDS, where all added amounts of SDS are adsorbed on the TiO₂ particles. The stability of the Pickering emulsions incorporating TiO₂ suspensions pre-adsorbed SDS was investigated by measuring the volume fraction of emulsified silicone oil, adsorbed amounts of TiO₂ suspensions pre-adsorbed SDS, oil droplet size, and some rheological responses such as the stress-strain sweep curve and strain and frequency dependences of dynamic viscoelastic moduli. The silicone oil was almost emulsified by TiO₂ suspensions pre-adsorbed SDS above cmc/10³. Increasing in the adsorbed amount of SDS on the TiO₂ particles leads to an increase in the adsorbed amounts of TiO₂ suspensions pre-adsorbed SDS. Such silicone oil emulsions for the first time showed two yield stresses in the stress-strain sweep curve as well as the oscillatory stress-strain curve. The respective yield stresses also increase with an increase in the adsorbed amounts of TiO₂ suspensions pre-adsorbed SDS. From such characteristic rheological properties and a partial sedimentation of some TiO₂ particles remained in the dispersion medium, we proposed the formation of a three dimensional network of the flocculated TiO₂ particles pre-adsorbed SDS on the silicone oil droplets.     

Interaction of water-soluble cationic porphyrin with anionic surfactant

The interaction of a cationic water-soluble porphyrin, 5,10,15,20-tetrakis [4-(3-pyridiniumpropoxy)phenyl]porphyrin tetrakisbromide (TPPOC3Py), with anionic surfactant, sodium dodecyl sulfate (SDS), in aqueous solution has been studied by means of UV-vis, (1)H NMR, fluorescence, circular dichroism (CD) spectra and dynamic laser light scattering (DLLS), and it reveals that TPPOC3Py forms porphyrin-surfactant complexes (aggregates), including ordered structures J- and H-aggregates, induced by association with surfactant monomers below the SDS critical micelle concentration (cmc), and forms micellized monomer upon the cmc, respectively. The position of TPPOC3Py in the micelle is determined, which is not in the micelle core instead of intercalated among the SDS chains, most likely with the pyridinium group extending into the polar headgroup region of the micelle.     

Aggregation kinetics and dissolution of coated silver nanoparticles

Determining the fate of manufactured nanomaterials in the environment is contingent upon understanding how stabilizing agents influence the stability of nanoparticles in aqueous systems. In this study, the aggregation and dissolution tendencies of uncoated silver nanoparticles and the same particles coated with three common coating agents, trisodium citrate, sodium dodecyl sulfate (SDS), and Tween 80 (Tween), were evaluated. Early stage aggregation kinetics of the uncoated and coated silver nanoparticles were assessed by dynamic light scattering over a range of electrolyte types (NaCl, NaNO(3), and CaCl(2)) and concentrations that span those observed in natural waters. Although particle dissolution was observed, aggregation of all particle types was still consistent with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The aggregation of citrate-coated particles and SDS-coated particles were very similar to that for the uncoated particles, as the critical coagulation concentrations (CCC) of the particles in different electrolytes were all approximately the same (40 mM NaCl, 30 mM NaNO(3), and 2 mM CaCl(2)). The Tween-stabilized particles were significantly more stable than the other particles, however, and in NaNO(3) aggregation was not observed up to an electrolyte concentration of 1 M. Differences in the rate of aggregation under diffusion-limited aggregation conditions at high electrolyte concentrations for the SDS and Tween-coated particles, in combination with the moderation of their electrophoretic mobilities, suggest SDS and Tween imparted steric interactions to the particles. The dissolution of the silver nanoparticles was inhibited by the SDS and Tween coatings, but not by the citrate coating, and in chloride-containing electrolytes a secondary precipitate of AgCl was observed bridging the individual particles. These results indicate that coating agents could significant influence the fate of silver nanoparticles in aquatic systems, and in some cases these stabilizers may completely prevent particle aggregation.