Preparation of core-shell microporous organic polymer-coated silica microspheres for chromatographic separation and N-glycopeptides enrichment

Through a “one-pot” strategy, a layer of microporous organic polymer was coated onto the surface of monodisperse amino-functionalized silica microsphere via amino-aldehyde condensation reaction with core-shell structure. The change in chemical structure of material before and after modification was determined by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Due to existence of a large number of amino and aldehyde groups in microporous organic polymer shell, the water contact angle decreased from 56.8° (silica microspheres) to 34.7° (microporous organic polymer-coated silica microspheres). Based on these properties, microporous organic polymer-coated silica microspheres were employed as the stationary phase for capillary liquid chromatography and successfully offered baseline separation of polar small molecules. Additionally, the material could also be served as the sorbent of hydrophilic interaction chromatography to enrich glycopeptides from human serum digest. A total of 470 unique N-glycopeptides and 342 N-glycosylation sites mapped to 112 N-glycosylated proteins were unambiguously identified from 2 μL of human serum, exhibiting a promising application prospect of microporous organic polymer-coated silica microspheres in the pretreatment of proteomics samples.     

Preparation of a chelating sorbent based on pyridylethylated polyethylenimine for recovering transition metal ions

A method was developed for preparing a chelating amino polymer, pyridylethylpolyethylenimine with maximal degree of substitution, by polymer-analogous transformations of branched polyethylenimine in reaction with 2-vinylpyridine. The ability of cross-linked pyridylethylpolyethylenimine with the degree of substitution of 0.32 to sorb Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Mn²⁺, and Pb²⁺ ions present simultaneously in solution was evaluated. In an ammonium acetate sorption system (pH 3.5–4.0), the sorbent selectively interacts with Cu(II) ions.     

Preparation of an extractant-impregnated porous membrane for the high-speed separation of a metal ion

A novel impregnation method of extractants into a porous polymeric support is described. Bis(2-ethylhexyl)phosphate (HDEHP) was impregnated onto an n-octadecylamino group of the polymer chain grafted onto the pore surface of a porous hollow-fiber membrane. First, an epoxy-group-containing polymer chain was appended onto the porous membrane by radiation-induced graft polymerization of glycidyl methacrylate (GMA). Second, n-octadecylamine was added to the graft chain via an epoxy-ring opening reaction to yield a hydrophobic group density of 3.0 mmol/g of the GMA-grafted fiber. Finally, HDEHP was impregnated to the n-octadecylamino group. The amount of impregnated HDEHP of 2.1 mmol/g of the GMA-grafted fiber was attained while retaining the liquid permeability of the porous membrane. An yttrium solution was forced to permeate through the pores of the HDEHP-impregnated porous hollow-fiber membrane. The higher permeation rate of the yttrium solution led to the higher adsorption rate of yttrium because of a negligible diffusional mass-transfer resistance. In addition, a high stability of impregnated HDEHP was observed after the repeated use of adsorption with 50 mg-Y/L yttrium solution and elution with 7 M nitric acid.     

Simultaneous ion chromatographic separation of anions and cations on poly(aspartic acid) functionalized silica

Poly(aspartic acid)-silica (PolyCAT A), originally designed for the cation-exchange chromatography of proteins, is proposed for the simultaneous ion chromatographic separation of inorganic anions and cations. This is possible owing to the zwitterion-exchange properties of this stationary phase, which are attributed to the presence of both protonated aminopropyl and dissociated carboxylic groups in poly(aspartic acid) attached to the silica. The retention of alkali metal (Li+, Na+, K+), alkaline earth metal (Mg2+, Ca2+), ammonium and inorganic anions (Cl-, H2PO4-, Br-, NO2-, I-, IO3-, NO3-, ClO4-, SCN-) was tested in aqueous solutions of sulfuric, perchloric, sulfosalicylic, citric, oxalic, maleic and aspartic acids with conductimetric detection. The effect of eluent pH, together with the concentration and characteristics of the eluting ions, were studied. Under optimum conditions (0.3 mmol dm(-3) H2SO4-0.2 mmol dm(-3) Li2SO4 eluent), the simultaneous separation of three anions (Cl-, H2PO4-, NO3-) and four cations (Na+, K+, Mg2+, Ca2+), on a PolyCAT A column (200 x 4.6 mm id, 5 microm film thickness) was achieved in 9 min.     

Preparation and evaluation of non-bonded hyperbranched polymer-coated columns for capillary electrophoresis

A series of hyperbranched poly(amine-ester)s based on 1,1,1-trimethylolpropane, methyl acrylate and diethanolamine were synthesized and coated on the inner surface of the fused-silica capillaries by physical adsorption. The most effective coating was the seventh generation hyperbranched poly(amine-ester) coating, which reduced the electroosmotic flow (EOF) greatly and suppressed protein adsorption effectively. The high separation efficiencies for basic proteins were obtained and the coating had a good stability.     

A new chelating sorbent for metal ion extraction under high saline conditions

A new chelating polymeric sorbent was developed by functionalizing Amberlite XAD-16 with 1,3-dimethyl-3-aminopropan-1-ol via a simple condensation mechanism. The newly developed chelating matrix offered a high resin capacity and faster sorption kinetics for the metal ions such as Mn(II), Pb(II), Ni(II), Co(II), Cu(II), Cd(II) and Zn(II). Various physio-chemical parameters like pH-effect, kinetics, eluant volume and flow rate, sample breakthrough volume, matrix interference effect on the metal ion sorption have been studied. The optimum pH range for the sorption of the above mentioned metal ions were 6.0–7.5, 6.0–7.0, 8.0–8.5, 7.0–7.5, 6.5–7.5, 7.5–8.5 and 6.5–7.0, respectively. The resin capacities for Mn(II), Pb(II), Ni(II), Co(II), Cu(II), Cd(II) and Zn(II) were found to be 0.62, 0.23, 0.55, 0.27, 0.46, 0.21 and 0.25 mmol g⁻¹ of the resin, respectively. The lower limit of detection was 10 ng ml⁻¹ for Cd(II), 40 ng ml⁻¹ for Mn(II) and Zn(II), 32 ng ml⁻¹ for Ni(II), 25 ng ml⁻¹ for Cu(II) and Co(II) and 20 ng ml⁻¹ for Pb(II). A high preconcentration value of 300 in the case of Mn(II), Co(II), Ni(II), Cu(II),Cd(II) and a value of 500 and 250 for Pb(II) and Zn(II), respectively, were achieved. A recovery of >98% was obtained for all the metal ions with 4 M HCl as eluting agent except in the case of Cu(II) where in 6 M HCl was necessary. The chelating polymer showed low sorption behavior to alkali and alkaline earth metals and also to various inorganic anionic species present in saline matrix. The method was applied for metal ion determination from water samples like seawater, well water and tap water and also from green leafy vegetable, from certified multivitamin tablets and steel samples.     

Synthesis and properties of a newly obtained sorbent based on silica gel coated with a polyaniline film as the stationary phase for non-suppressed ion chromatography

The new sorbent for non-suppressed ion chromatography based on silica gel coated with a film of polyaniline (PANI) was obtained in a process of in situ polymerization of aniline by oxidation with ammonium peroxydisulfate. Raman analyses performed using a Thermo Scientific DXR confocal Raman Microscope equipped with the Omnic 8 software from Thermo Fisher Scientific have proved a uniform distribution of PANI on the surface of chromatographic beads and in the pores of the particle.     

Hierarchically imprinted organic-inorganic hybrid sorbent for selective separation of mercury ion from aqueous solution

A new type of hierarchically organic-inorganic hybrid sorbent was prepared by a double-imprinting approach for the selective separation of Hg(II) from aqueous solution. In the imprinting process, both mercury ions and surfactant micelles (cetyltrimethylammonium bromide, CTAB) were used as templates, N-[3-(trimethoxy-silyl)propyl]ethylenediamine (TPED) as functional monomer, and tetraethoxysilane (TEOS) as cross-linking agent. The mercury ions and surfactant were removed from sorbent via acid leaching and ethanol extraction, respectively. The adsorption property and selective recognition ability of the sorbents were studied by equilibrium-adsorption method. Results showed that in the presence of Cu(II) or Cd(II) the biggest selectivity coefficient of the imprinted sorbents for Hg(II) was over 100, which is much higher than those of non-imprinted sorbents. The largest relative selectivity coefficient (k′) of the ion-imprinted functionalized sorbent between Hg(II) and Cu(II) was over 300, and between Hg(II) and Cd(II) over 200. The uptake capacities and the selectivity coefficients of the hierarchically imprinted sorbent were much higher than those of the sorbent prepared without CTAB template. Furthermore, the new imprinted sorbent possessed a fast kinetics for the removal of Hg(II) from aqueous solution with the saturation time less than 5 min, and could be used repeatedly. This sorbent has been successfully applied to the separation and determination of the trace Hg(II) in real water samples and those spiked with standards. This new sorbent can be used as an effective solid-phase extraction material for the selective preconcentration and separation of Hg(II) in environmental samples.     

固定化金属离子亲和发光二氧化硅纳米粒子的制备及其用于磷酸化蛋白免疫印迹标记

发展了一种能够识别磷酸化蛋白的固定化金属离子亲和发光二氧化硅纳米粒子用于免疫印迹(Western Blot)磷酸化蛋白的标记.首先通过反相微乳液St?ber方法合成了掺杂异硫氰酸荧光素硅烷化衍生物的发光二氧化硅(FITC@SiO2)球形纳米粒子,粒子平均粒径为60 nm.然后通过共聚反应在FITC@SiO2纳米粒子表面...     

Preparation of chitosan functionalized monolithic silica column for hydrophilic interaction liquid chromatography

A novel cationic hydrophilic interaction monolithic stationary phase based on the chemical modification of carboxymethyl chitosan (CMCH) to the monolithic silica skeleton using carbodiimide as an activation reagent was prepared for performing capillary liquid chromatography. The amino and hydroxy moieties of CMCH functioned as both the ion-exchange sites and polar providers. The performance of the column was studied by the separation of polar acidic compounds. The chitosan functionalized monolithic silica column showed good selectivity for nucleosides, nucleotides, aromatic acids and aliphatic acids. The mechanism for the separation of these compounds was also studied. The results showed that these compounds were separated primarily based on the hydrophilic interaction mechanism.     

Electrochromatographic evaluation of a silica monolith capillary column for separation of basic pharmaceuticals

A silica-based monolithic capillary column was prepared via a sol-gel process. The continuous skeleton and large through-pore structure were characterized by scanning electron microscopy (SEM). The native silica monolith has been successfully employed in the electrochromatographic separation of beta-blockers and alkaloids extracted from traditional Chinese medicines (TCMs). Column efficiencies greater than 250 000 plates/m for capillary electrochromatography (CEC) separation of basic compounds were obtained. It was observed that retention of basic pharmaceuticals on the silica monolith was mainly contributed by a cation-exchange mechanism. Other retention mechanisms including reversed-phase and normal-phase mechanisms and electrophoresis of basic compounds also played a role in separation. A comparison of the differences between CEC and capillary zone electrophoresis (CZE) separation was also discussed.     

Preparation and characterization of a molecularly imprinted polymer by grafting on silica supports: a selective sorbent for patulin toxin

A new molecularly imprinted polymer (MIP) has been prepared on silica beads using the radical “grafting from” polymerization method for selective extraction of minor contaminant mycotoxin of patulin (PTL). After the introduction of amino groups onto the silica surface with 3-aminopropyltriethoxysilane, azo initiator onto the silica surface was achieved by the reaction of surface amino groups with 4,4′-azobis(4-cyanopentanoic acid). The scale-up synthesis of MIP was then carried out in the presence of 6-hydroxynicotinic acid as template substitute, functional, and cross-linking monomers. The prepared sorbent was characterized using FT-IR spectroscopy, scanning electron microscopy, elemental analysis, and the adsorption–desorption selectivity, and the capacity characteristic of the polymer was investigated by a conventional batch adsorption test and Scatchard plot analysis. The results indicated that coated polymers had specific adsorption to PTL as compared with its co-occurring 5-hydroxymethyl-2-furaldehyde (hydroxymethylfurfural (HMF)), at the same bulk concentration for solution of PTL and HMF, the maximum absorbance in the solid-phase extraction (SPE) method to PTL were 93.97% or 0.654 μg/mg while to HMF they were 76.89% or 0.496 μg/mg. Scatchard analysis revealed that two classes of binding sites were formed in PTL-MIP with dissociation constants of 3.2 × 10⁻² and 5.0 × 10⁻³ mg/mL and the affinity binding sites of 8.029 and 1.364 mg/g, respectively. The recoveries of PTL were more than 90% for the developed MISPE and around 75% for the traditional liquid–liquid extraction in spiked apple juice samples. It was concluded that the method is suitable for the scale-up synthesis of PTL-MIP grafted on silica, and the polymer can be effectively applied as SPE coupled with high-performance liquid chromatography (HPLC) for the determination of PTL in apple juice or other related products.     

Preparation,characterization and evaluation of a hybrid polymeric coating with sorbent properties

A hybrid polymeric coating (PDMS–CNPrTEOS) with sorbent properties was prepared by the sol–gel method from hydroxyl-terminated poly(dimethylsiloxane) (OH-PDMS), and cyanopropyltriethoxysilane (CNPrTEOS) as an inorganic precursor, using trifluoroacetic acid (TFA) as a catalyst. A coating with the sol–gel solution was prepared on glass plates using the dip-coating method and subsequently characterized. Characterization by FTIR shows that cyano groups are present on the surface coating and contact angle tests show that the coating presents hydrophilic characteristics. The organic–inorganic polymer was stable up to 400 °C with a weight loss of 8 wt % and showed good stability after immersion for 60 min in vortex and 45 min in ultrasonic bath, in various solvents: water, methanol (MeOH), acetone, isooctane, ethyl acetate (AcOEt) and acetonitrile (ACN), and solutions at different pH (1–12) for 48 h (h). The PDMS–CNPrTEOS hybrid polymer was evaluated and was found to have the ability to extract simultaneously furanic compounds in aqueous solution when it is employed as a sorbent for stir bar sorptive extraction (SBSE).     

Preparation of phenylboronic acid functionalized cation-exchange monolithic columns for protein separation and refolding

In this study, we described a simple and effective modification procedure to prepare poly (methacrylate-co-ethylene glycol dimethacrylate) monolithic columns functionalized with 3-aminophenylboronic acid. The column morphology, pore size and specific surface area of the fabricated monolith were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and mercury intrusion porosimeter, respectively. The frontal analysis was carried out for dynamic loading capacity of the model protein on the modified column. The chromatographic performance of the cation-exchange monolith was evaluated through separating a mixture of five proteins such as lysozyme, cytochrome c, ribonuclease A, trypsin and bovine serum albumin and one-step purification of lysozyme from egg whites, and the expected results were obtained. In addition, the functionalized column was used to refold ribonuclease A and cytochrome c, and this procedure was monitored by circular dichroism and fluorescence spectroscopy. Compared with the conventional dilution refolding method, the ion-exchange chromatography refolding method developed here is more effective for specific bioactivity recovery.     

Preparation of phenyl‐functionalized magnetic mesoporous silica microspheres for the fast separation and selective enrichment of phenyl‐containing peptides

Peptide enrichment before mass spectrometry analysis is essential for large‐scale peptidomic studies, but challenges still remain. Herein, magnetic mesoporous silica microspheres with phenyl group modified interior pore walls were prepared by a facile sol–gel coating strategy, and were successfully applied for selective enrichment of phenyl‐containing peptides in complex biological samples. The newly prepared nanomaterials possessed abundant silanol groups in the exterior surface and numerous phenyl groups in the interior pore walls, as well as a large surface area (592.6 m²/g), large pore volume (0.33 cm³/g), uniform mesopores (3.8 nm), strong magnetic response (29.3 emu/g), and good dispersibility in aqueous solution. As a result of the unique structural properties and size‐exclusion effect, the core–shell phenyl‐functionalized magnetic mesoporous silica microspheres exhibited excellent performance in fast separation and selective enrichment of phenyl‐containing peptides, and the adsorption capacity for bradykinin reached 22.55 mg/g. In addition, selective enrichment of phenyl‐containing peptides from complex samples that are consist of peptides, large proteins, and human serum were achieved by using the as‐prepared microspheres, followed by high‐performance liquid chromatography with ultraviolet detection and electrospray ionization quadrupole time‐of‐flight mass spectrometry analysis. These results demonstrated the as‐prepared microspheres would be a potential candidate for endogenous phenyl‐containing peptides enrichment and biomarkers discovery in peptidome analysis.     

Dual‐template crown ether‐functionalized hierarchical porous silica: Preparation and application for adsorption of energy metal lithium

Lithium is the lightest energy metal element on earth and it has applications in lithium batteries and nuclear fusion. With the development of high‐tech and widespread applications of lithium, the demand for lithium continues to increase. In this work, a hierarchical porous lithium adsorbent (2M12C4‐HPS) was synthesized from a precursor of hierarchical porous silica (HPS), the HPS being obtained via a dual‐template technique. The microstructure and morphology of 2M12C4‐HPS were characterized using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction and nitrogen adsorption–desorption measurements. The obtained hierarchical porous 2M12C4‐HPS containing two kinds of pores with different sizes (peaking at about 2.01 and 7.82 nm) has a high specific surface area (1143.56 m² g^?1). Fourier transform infrared spectroscopy and thermogravimetric analysis were used to confirm the surface organic functional groups of 2M12C4‐HPS, indicating that the functional group 2‐methylol‐12‐crown‐4 (2M12C4) was grafted on HPS successfully. The lithium adsorption properties, kinetics and isotherms of 2M12C4‐HPS were investigated. The adsorption kinetics can be described by the pseudo‐second‐order kinetic model and the adsorption isotherms well fit the Langmuir isotherm equation. In addition, 2M12C4‐HPS exhibited excellent specificity towards Li⁺. And the maximum adsorption rate of 2M12C4‐HPS is up to about 94.34%. The obtained results indicate that 2M12C4‐HPS has a broad commercial application prospect for adsorption of lithium.     

Multiwalled carbon nanotube based ion imprinted polymer as sensor and sorbent for environmental hazardous cobalt ion

By using molecular imprinting approach, a highly selective multiwalled carbon nanotube based electrochemical sensor for Co(II) ion was fabricated. The sites for binding of Co(II) ion was created with cobalt ion as template, NNMBA-crosslinked polyacrylic acid as the solid polymer matrix which is coated on functionalized MWCNTs. For the comparison, system without template was also created (MWCNT-NIP). In order to check the importance of MWCNTs, imprinted (IIP) and non-imprinted (NIP) polymer without MWCNTs were also produced. The developed systems were successfully characterized by different analytical techniques. The selectivity of the systems was checked with different metal ions. The electrochemical response of the nanostructures modified platinum electrode were investigated and optimized. The MWCNT-IIP/Co/PE exhibit fast sensing and high selectivity towards Co(II) ion. The detection limit of the sensor was explored with differential pulse voltammetry and it was found to be at 1.01 × 10^?5µM. The practical applicability of the sensor was successfully applied for the trace sensing and extraction of Co(II) ion from real samples such as fertilizer and battery. The recoveries of Co(II) ion from the samples were very high, that revealed the efficiency of the systems for environmental applications.     

Development of a novel multi-element detection system for trace metal determination based on chemiluminescence after separation by ion chromatography

A highly sensitive, non-selective trace metal detector based on chemiluminescence has been developed. The metals, separated by simple ion-exchange chromatography, bring about the displacement of cobalt from a Co-EDTA post-column reagent. The liberated cobalt is then detected by the luminol-peroxide chemiluminescence reaction using a modified spectrofluorimeter as the detector. The metals determined are Mg, Ca, Sr, Ba, Fe(II), Fe(III), Co, Ni, Cu, Zn, the lanthanides, Th, Al, Ga, In, Pb and Bi. The detection limits (three times the baseline noise) range between 2 and 100 μg l^?1, depending on the analyte, for a 200-μl injection. To demonstrate the quantitative performance of the detector, the zinc and aluminium contents of a fresh water certified reference material was determined and gave good agreement with the certificate values.