N-centered hexazirconium chloride clusters: excision and redox chemistry

The tightly cross-linked solid Zr(6)Cl(15)N yields [(Zr(6)NCl(12))Cl(6)](3-) upon heating with bis(triphenylphosphine)iminium chloride (PPNCl), in MeCN at 90 degrees C. Purple solutions containing [(Zr(6)NCl(12))Cl(6)](3-) were obtained and characterized with (15)N NMR. Cyclic voltammetric (CV) measurements on the series of [(Zr(6)ZCl(12))Cl(6)](n-) cluster ions (Z = Be, B, C, and N) in acetonitrile reveal that these cluster ions exhibit multiple reversible redox waves at potentials that can be systematically understood, including a reversible redox wave corresponding to the [(Zr(6)NCl(12))Cl(6)](3-/4-) couple. Preparation of the reduced cluster ion, [(Zr(6)NCl(12))Cl(6)](4-), (with 15 cluster-bonding electrons) was achieved by reduction of [(Zr(6)NCl(12))Cl(6)](3-) with (C(5)(CH(3))(5))(2)Co. Several new N-centered cluster complexes: (PPN)(3)[(Zr(6)NCl(12))Cl(6)].CH(2)Cl(2), [(C(5)(CH(3))(5))(2)Co(+)](3)[(Zr(6)NCl(12))Cl(6)], and (Et(4)N)(4)[(Zr(6)NCl(12))Cl(6)].2CH(3)CN have been isolated and structurally characterized.     

Hydrogen-bond-directing effect in the ionothermal synthesis of metal coordination polymers

Four new cobalt coordination polymers, (EMIm)[Co2(TMA-H)2(44bpy)3]Br 1, (EMIm)[Co(TMA-H)(44bpy)2](44bpy)Br 2, (EMIm)[Co(TMA)(Im-H)]3 and (EMIm)2[Co(TMA)2(TED-H2)] 4, were prepared from 1-ethyl-3-methyl imidazolium bromide (EMIm-Br). All the compounds have similar two-dimensional cobalt trimesate (TMA) coordination layers but different three-dimensional supramolecular architectures that contain one of three potentially ditopic amines, 4,4'-bipyridine (44bpy), imidazole (Im-H) and triethylenediamine (TED). Two-fold interpenetration of hydrogen-bonding networks was found for 1, 2 and 4. The coordination layers of 1 and 2 are neutral while 3 and 4 have anionic molecular assemblies. The use of organic amines, that act as supramolecular bridging ligands, introduces hydrogen-bond-directing effects in the ionothermal synthesis of metal coordination polymers. Hydrogen bonding helps to align the packing between the coordination layers and control the formation of 3D supramolecular networks. In 1, hydrogen bonds between the ionic species within the channels direct the alignment of non-directional electrostatic interactions between EMIm+ and Br(-) ions, which is a rare case of a hydrogen-bond-templating effect of ionic liquids in ionothermal synthesis.     

The First Mixed-Halide Zirconium Cluster Compounds: Zr(6)Cl(1.6)I(10.4)Be, Zr(6)Cl(1.3)I(10.7)B, and Zr(6)Cl(11.5)I(1.5)B. Matrix Effects and Halogen Substitution in Compact Network Structures

Investigations of the effect of halogen size on structure stability have been conducted in well-reduced and heavily interbridged zirconium chloride-iodide cluster systems. The title compounds are obtained in good yields from reactions of Zr, ZrCl(4), ZrI(4), and B or Be in sealed Ta tubes for approximately 4 weeks at 850 degrees C. Single-crystal diffraction at room temperature established these as Zr(6)Cl(1.65(4))I(10.35(4))Be and Zr(6)Cl(1.27(3))I(10.73(3))B [R&thremacr;, Z = 3, a = 14.3508(8), 14.389(1) ?, c = 9.8777(9), 9.915(2) ?, respectively] and Zr(6)Cl(11.47(2))I(1.53(2))B [P4(2)/mnm, Z = 2, a = 12.030(1) ?, c = 7.4991(8) ?]. These are derivatives of the Zr(6)I(12)C and orthorhombic Zr(6)Cl(13)B structures, respectively, the latter containing unusual linear chains of clusters interbridged by Cl(i-i) that are in turn interconnected by three-bonded Cl(a-a-a) atoms. The random substitution of fractional Cl at specific I sites in the first two, and I for certain Cl in the third, was positionally resolved in all cases. The replacement always occurs at two-bonded X(i), so that single types of halogen are left in sites that interconnect clusters and generate the three-dimensional array. Structural changes seen in both structures are specifically related to relief of X.X crowding in the parent structure (matrix effects). Substitution of Cl for I(i) in the Zr(6)I(12)C type greatly reduces intercluster I.I repulsions and allows, among other things, a 0.20 ? (5.8%) reduction in Zr-I(a-i) intercluster bond lengths. Increased Cl.I repulsions caused by I substitution in orthorhombic Zr(6)Cl(13)B (Pnnm) convert the twisted chains and angular Cl(a-a-a) interchain bridges to planarity in tetragonal Zr(6)Cl(11.5)I(1.5)B. Phase widths found are 0 相似文献   

Synthesis and characterization of Mo(6) chalcobromides and cyano-substituted compounds built from a novel [(Mo(6)Br(i)(6)Y(i)(2))L(a)(6)](n)()(-) discrete cluster unit (Y(i) = S or Se and L(a) = Br or CN)

The syntheses, crystal structures determined by single-crystal X-ray diffraction, and characterizations of new Mo(6) cluster chalcobromides and cyano-substituted compounds with 24 valence electrons per Mo(6) cluster (VEC = 24), are presented in this work. The structures of Cs(4)Mo(6)Br(12)S(2) and Cs(4)Mo(6)Br(12)Se(2) prepared by solid state routes are based on the novel [(Mo(6)Br(i)(6)Y(i)(2))Br(a)(6)](4)(-) (Y = S, Se) discrete units in which two chalcogen and six bromine ligands randomly occupy the inner positions, while the six apical ones are fully occupied by bromine atoms. The interaction of these two compounds with aqueous KCN solution results in apical ligand exchange giving the two first Mo(6) cyano-chalcohalides: Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)S(2))(CN)(6)](3).16H(2)O and Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)Se(2))(CN)(6)](3).16H(2)O. Their crystal structures, built from the original [(Mo(6)Br(i)(6)Y(i)(2))(CN)(a)(6)](4)(-) discrete units, will be compared to those of the two solid state precursors and other previously reported Mo(6) cluster compounds. Their redox properties and (77)Se NMR characterizations will be presented. Crystal data: Cs(4)Mo(6)Br(12)S(2), orthorhombic, Pbca (No. 61), a = 11.511(5) A, b = 18.772(5) A, c = 28.381 A (5), Z = 8; Cs(4)Mo(6)Br(12)Se(2), Pbca (No. 61), a = 11.6237(1) A, b = 18.9447(1) A, c = 28.4874(1) A, Z = 8; Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)S(2))(CN)(6)](3).16H(2)O, Pm-3m (No. 221), a = 17.1969(4) A, Z = 1; Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)Se(2))(CN)(6)](3).16H(2)O, Pm-3m (No. 221), a = 17.235(5) A, Z = 1.     

Synthesis and characterization of Prussian blue analogues incorporating the edge-bridged octahedral [Zr6BCl12]2+ cluster core

In attempts to produce a microporous magnet, two approaches were explored for expanding the Prussian blue structure type via incorporation of edge-bridged octahedral [Zr(6)ZCl(12)](2+) (Z = B, Be) cluster cores. Dissolution of Rb(5)Zr(6)BCl(18) and K(5)Zr(6)BeCl(15) in an acetonitrile solution of Et(4)N(CN) led to the isolation of (Et(4)N)(5)[Zr(6)BCl(12)(CN)(6)] (1) and (Et(4)N)(5)[Zr(6)BeCl(12)(CN)(6)].2MeCN.2THF (2), respectively. The crystal structure of 1.1.5MeCN revealed the expected cyano-terminated cluster complex with a trans-N...N span of 11.73(3) Angstroms. Unfortunately, both [Zr(6)ZCl(12)(CN)(6)](5-) clusters rapidly lose their cyanide ligands in aqueous solution making them ill-suited for solid-forming reactions with hydrated metal ions. Such outer-ligand exchange, however, allows the use of [Zr(6)BCl(18)](4-) in the synthesis of expanded Prussian blue-type solids through reactions with [Cr(CN)(6)](3-). The use of 2.2 M aqueous LiCl to stabilize the cluster during the reaction gave (Et(4)N)(2)[Zr(6)BCl(12)][Cr(CN)(6)]Cl.3H(2)O (3), while the use of 1 M acetic acid yielded (Et(4)N)(2)[Zr(6)BCl(12)][Cr(CN)(6)]Cl.2H(2)O.CH(3)CO(2)H (4). A Rietveld refinement against X-ray powder diffraction data collected for 3 confirmed the presence of a cubic Prussian blue framework structure, featuring alternating [Zr(6)BCl(12)](2+) cores and [Cr(CN)(6)](3-) anions. The temperature dependence of magnetization data obtained for 4 revealed activation of magnetic exchange interactions between the S = (1)/(2) cluster units and the S = (3)/(2) hexacyanochromate complexes below 10 K.     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Synthesis, Structure, and Reactivity of [Zr(6)Cl(18)H(5)](2)(-), the First Paramagnetic Species of Its Class

Reaction of [Zr(6)Cl(18)H(5)](3)(-) (1) with 1 equiv of TiCl(4) yields a new cluster anion, [Zr(6)Cl(18)H(5)](2)(-) (2), which can be converted back into [Zr(6)Cl(18)H(5)](3)(-) (1) upon addition of 1 equiv of Na/Hg. Cluster 2 is paramagnetic and unstable in the presence of donor molecules. It undergoes a disproportionation reaction to form 1, some Zr(IV) compounds, and H(2). It also reacts with TiCl(4) to form [Zr(2)Cl(9)](-) (4) and a tetranuclear mixed-metal species, [Zr(2)Ti(2)Cl(16)](2)(-) (3). The oxidation reaction of 1 with TiCl(4) is unique. Oxidation of 1 with H(+) in CH(2)Cl(2) solution results in the formation of [ZrCl(6)](2)(-) (5) and H(2), while in py solution the oxidation product is [ZrCl(5)(py)](-) (6). There is no reaction between 1 and TiI(4), ZrCl(4), [TiCl(6)](2)(-), [ZrCl(6)](2)(-), or CrCl(3). Compounds [Ph(4)P](2)[Zr(6)Cl(18)H(5)] (2a), [Ph(4)P](2)[Zr(2)Ti(2)Cl(16)] (3a), [Ph(4)P](2)[Zr(2)Cl(9)] (4a), [Ph(4)P](2)[ZrCl(6)].4MeCN (5a.4MeCN), and [Ph(4)P][ZrCl(5)(py)] (6a) were characterized by X-ray crystallography. Compound 2a crystallized in the trigonal space group R&thremacr; with cell dimensions (20 degrees C) of a = 28.546(3) ?, b = 28.546(3) ?, c = 27.679(2) ?, V = 19533(3) ?(3), and Z = 12. Compound 3a crystallized in the triclinic space group P&onemacr; with cell dimensions (-60 degrees C) of a = 11.375(3) ?, b = 13.357(3) ?, c = 11.336(3) ?, alpha = 106.07(1) degrees, beta = 114.77(1) degrees, gamma = 88.50(1) degrees, V = 1494.8(7) ?(3), and Z = 1. Compound 4a crystallized in the triclinic space group P&onemacr; with cell dimensions (-60 degrees C) of a = 12.380(5) ?, b = 12.883(5) ?, c = 11.000(4) ?, alpha = 110.39(7) degrees, beta = 98.29(7) degrees, gamma = 73.12(4) degrees, V = 1572(1) ?(3), and Z = 2. Compound 5a.4MeCN crystallized in the monoclinic space group P2(1)/c with cell dimensions (-60 degrees C) of a = 9.595(1) ?, b = 19.566(3) ?, c = 15.049(1) ?, beta = 98.50(1) degrees, V = 2794.2(6) ?(3), and Z = 2. Compound 6a crystallized in the monoclinic space group P2(1)/c with cell dimensions (20 degrees C) of a = 10.3390(7) ?, b = 16.491(2) ?, c = 17.654(2) ?, beta = 91.542(6) degrees, V = 3026.4(5) ?(3), and Z = 4.     

On the self-aggregation and fluorescence quenching aptitude of surfactant ionic liquids

The aggregation behavior in aqueous solution of a number of ionic liquids was investigated at ambient conditions by using three techniques: fluorescence, interfacial tension, and (1)H NMR spectroscopy. For the first time, the fluorescence quenching effect has been used for the determination of critical micelle concentrations. This study focuses on the following ionic liquids: [Cnmpy]Cl (1-alkyl-3-methylpyridinium chlorides) with different linear alkyl chain lengths (n=4, 10, 12, 14, 16, or 18), [C12mpip]Br (1-dodecyl-1-methylpiperidinium bromide), [C12mpy]Br (1-dodecyl-3-methylpyridinium bromide), and [C12mpyrr]Br (1-dodecyl-1-methylpyrrolidinium bromide). Both the influence of the alkyl side-chain length and the type of ring in the cation (head) on the CMC were investigated. A comparison of the self-aggregation behavior of ionic liquids based on 1-alkyl-3-methylpyridinium and 1-alkyl-3-methylpyridinium cations is provided. It was observed that 1-alkyl-3-methylpyridinium ionic liquids could be used as quenchers for some fluorescence probes (fluorophores). As a consequence, a simple and convenient method to probe early evidence of aggregate formation was established.     

Novel chelate ring-opening induced by silver(I) of five-coordinate palladium(II) and platinum(II) complexes containing tripodal polyphosphines

The ionic complexes [Pd(NP 3)X]X [NP 3 = tris[2-(diphenylphosphino)ethyl]amine, X = Cl (1), Br(2)] and [M(PP 3)X]X [PP 3 = tris[2-(diphenylphosphino)ethyl]phosphine, M = Pd, X = Cl (3), Br(4); M = Pt, X = Cl (5), Br (6)] contain square pyramidal (1, 2) and trigonal bipyramidal (3- 6) cations with three fused chelate rings to M and one M-X bond. By addition of AgX salts (X = Cl, Br, NO 3) an unexpected ring-opening reaction occurs with formation of the heteronuclear species PdAg(NP 3)X 3 [X = Cl (7), Br (8)], MAg(PP 3)X 3 [M = Pd, X = Cl (9), Br (10), NO 3 (13);M = Pt, X = Cl (11), Br (12), NO 3 (14)]. The complexes have been characterized in the solid state and solution. The X-ray crystal structures of 9 and 13 reveal a distorted square-planar arrangement to Pd(II) that is coordinated to three P of PP 3 (the central and two terminal atoms) and to one chloride (9) or one oxygen atom of NO 3 (13). The resultant dangling phosphorus of the ring opening is bound to Ag(I) that completes the three- [PAgCl 2 ( 9)] and four-coordination [PAg(ONO 2)(O 2NO) (13)] through the donor atoms of the anions with the nitrates in 13 unusually acting as both mono- and bidentate ligands. Complexes 7, 8, 10, and 11 undergo oligomerization in solution. Complex 10 oligomerizes giving rise to the ionic compound [Pd 4Ag 2(PP 3) 2 Br 9]Br ( 10a) whose X-ray crystal structure indicates the presence of cations with a Pd(mu-Br) 3Pd unit that connects via bromide bridges two BrPdP 2PPAg Br 2 fragments containing distorted square-planar and trigonal-planar Pd(II) and Ag(I) centers, respectively. The palladium(II) metal centers in the central unit afford the five-coordination (PdBr 5) with a distorted trigonal bipyramidal geometry. The ionic system [Pt 2Ag 2(PP 3) 2 Cl 5]Cl (11a) consists of chloride anions and heteronuclear monocations. The X-ray crystal structure reveals that the cations contain two distorted square-planar ClPtP 3 units bridged by one PAgCl(mu-Cl) 2AgP fragment that is bearing tetrahedral (PAgCl 3) and trigonal planar PAgCl 2 silver(I) centers. Further additions of the corresponding AgX salts to complexes 7- 14 did not give rise to any new ring-opening reaction.     

Mercuric ionic liquids: [C(n)mim][HgX3], where n = 3, 4 and X = Cl, Br

A series of mercury(II) ionic liquids, [C(n)mim][HgX(3)], where [C(n)mim] = n-alkyl-3-methylimidazolium with n = 3, 4 and X = Cl, Br, have been synthesized following two different synthetic approaches, and structurally characterized by means of single-crystal X-ray structure analysis ([C(3)mim][HgCl(3)] (1), Cc (No. 9), Z = 4, a = 16.831(4) ?, b = 10.7496(15) ?, c = 7.4661(14) ?, β = 105.97(2)°, V = 1298.7(4) ?(3) at 298 K; [C(4)mim][HgCl(3)] (2), Cc (No. 9), Z = 4, a = 17.3178(28) ?, b = 10.7410(15) ?, c = 7.4706(14) ?, β = 105.590(13)°, V = 1338.5(4) ?(3) at 170 K; [C(3)mim][HgBr(3)] (3), P2(1)/c (No. 14), Z = 4, a = 10.2041(10) ?, b = 10.7332(13) ?, c = 14.5796(16) ?, β = 122.47(2)°, V = 1347.2(3) ?(3) at 170 K; [C(4)mim][HgBr(3)] (4), Cc (No. 9), Z = 4, a = 17.093(3) ?, b = 11.0498(14) ?, c = 7.8656(12) ?, β = 106.953(13)°, V = 1421.1(4) ?(3) at 170 K). Compounds 1, 2, and 4 are isostructural and are characterized by strongly elongated trigonal [HgX(5)] bipyramids, which are connected via common edges in chains. In contrast, 3 contains [Hg(2)Br(6)] units formed by two edge-sharing tetrahedra. With melting points of 69.3 °C (1), 93.9 °C (2), 39.5 °C (3), and 58.3 °C (4), all compounds qualify as ionic liquids. 1, 2, and 4 solidify upon fast cooling as glasses, whereas 3 crystallizes. Cyclic voltammetry shows two separate, quasi-reversible redox processes, which can be associated with the 2Hg(2+)/Hg(2)(2+) and Hg(2)(2+)/2Hg redox couples.     

Ionic iron(iii) complexes of bis(phenol)-functionalized imidazolium cations: synthesis, structures and catalysis for aryl Grignard cross-coupling of alkyl halides

A series of bis(phenol)-functionalized imidazolium salts, 1,3-bis(4,6-di-R(1)-2-hydroxybenzyl)-2-R(2)-4,5-di-R(3)-imidazolium chlorides H(3)L(n)Cl (R(1) = (t)Bu, R(2) = R(3) = H, H(3)L(1)Cl, 1; R(1) = CH(3), R(2) = R(3) = H, H(3)L(2)Cl, 2; R(1) = (t)Bu, R(2) = H, R(3) = Cl, H(3)L(3)Cl, 3; R(1) = (t)Bu, R(2) = CH(3), R(3) = H, H(3)L(4)Cl, 4), were used to produce a novel series of ionic iron(iii) complexes [H(3)L(n)][FeX(4)] (n = 1, X = Cl, 5; n = 2, X = Cl, 6; n = 3, X = Cl, 7; n = 4, X = Cl, 8; n = 1, X = Br, 9; n = 3, X = Br, 10). All of the complexes were characterized by Raman spectroscopy and electrospray ionization mass spectrometry. Elemental analysis and X-ray crystallography were also used. All of the complexes were non-hygroscopic and air-stable, with five of them existing as solids (5, 7-10) and one as an oil (6) at room temperature. A preliminary catalytic study on the cross-coupling reactions of aryl Grignard reagents with primary and secondary alkyl halides bearing β-hydrogens, revealed that all of the ionic iron(iii) complexes exhibited good to excellent catalytic activity. Complexes 5, 6 and 8 exhibited optimal activity, whereas 7, 9 and 10 showed only moderate activity. Furthermore, by simply decanting the cross-coupling product in the ether layer, complexes 5 and 6 could be reused in at least seven successive runs without significant loss in catalytic activity.     

Synthesis of Im3[Re3mu3-S)(mu-S3)Br9]Br (Im = 1-ethyl-3-methylimidazolium) by means of an ionic liquid

Reaction of [Re3(mu3-S)(mu-S2)3Cl6]Cl with an ionic liquid composed of 1-ethyl-3-methylimidazolium bromide (ImBr) and aluminum bromide (AlBr3) formed a new trinuclear rhenium sulfide cluster compound Im3[Re3(mu3-S)(mu-S)3Br9]Br with nine terminal bromo ligands.     

(Zr6B)Cl12(MeCN)6][Ph4B].1.6MeCN: an easily-accessible starting material for zirconium cluster chemistry and [(Zr6B)Cl12(Pyr6)][Ph4B].2{(PyrH)[Ph4B]}, a first reaction product

In an attempt to produce a convenient starting material for the development of new interstitially centered, octahedral zirconium cluster compounds by solution-chemical methods, a new approach, using Na[Ph4B] to withdraw all six outer chlorides by precipitating them as NaCl, was explored. From a solution of K 2[(Zr 6B)Cl15] and Na[Ph4B] in acetonitrile, the tetraphenylborate salt [(Zr6B)Cl12(MeCN)6][Ph4B].1.6 MeCN (1) was obtained with high yield. It contains the [(Zr6B)Cl(i)12(MeCN)(a)6](+) ion (2) with an octahedral metal core. The crystal structure of 1, which possesses high solubility in several organic solvents, is reported. Treatment of 1 with pyridine gave the new cluster phase [(Zr6B)Cl12(Pyr6][Ph4B].2{(PyrH)[Ph4B]} (3), which was characterized as well by X-ray crystallography. An advantage of both title phases is that they contain Lewis acidic zirconium cluster units, which might be useful as catalysts, with the additional advantage of tuneable redox properties.     

Copper halide-bridged ruthenium telluride carbonyl complexes: discovery of the semiconducting cluster chain polymer {[PPh4]2[Te2Ru4(CO)10Cu4Br2Cl2].THF}infinity

A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.     

Aqueous reactions of U(VI) at high chloride concentrations: syntheses and structures of new uranyl chloride polymers

The reactions of UO(3) with acidic aqueous chloride solutions resulted in the formation of two new polymeric U(VI) compounds. Single crystals of Cs(2)[(UO(2))(3)Cl(2)(IO(3))(OH)O(2)].2H(2)O (1) were formed under hydrothermal conditions with HIO(3) and CsCl, and Li(H(2)O)(2)[(UO(2))(2)Cl(3)(O)(H(2)O)] (2) was obtained from acidic LiCl solutions under ambient temperature and pressure. Both compounds contain pentagonal bipyramidal coordination of the uranyl dication, UO(2)(2+). The structure of 1 consists of infinite [(UO(2))(3)Cl(2)(IO(3))(mu(3)-OH)(mu(3)-O)(2)](2-) ribbons that run down the b axis that are formed from edge-sharing pentagonal bipyramidal [UO(6)Cl] and [UO(5)Cl(2)] units. The Cs(+) cations separate the chains from one another and form long ionic contacts with terminal oxygen atoms from iodate ligands, uranyl oxygen atoms, water molecules, and chloride anions. In 2, edge-sharing [UO(3)Cl(4)] and [UO(5)Cl(2)] units build up tetranuclear [(UO(2))(4)(mu-Cl)(6)(mu(3)-O)(2)(H(2)O)(2)](2-) anions that are bridged by chloride to form one-dimensional chains. These chains are connected in a complex network of hydrogen bonds and interactions of uranyl oxygen atoms with Li(+) cations. Crystal data: 1, orthorhombic, space group Pnma, a = 8.2762(4) A, b = 12.4809(6) A, c = 17.1297(8) A, Z = 4; 2, triclinic, space group P1, a = 8.110(1) A, b = 8.621(1) A, c = 8.740(1) A, Z = 2.     

Stoichiometric and catalytic secondary O-atom transfer by Fe(III)-NO2 complexes derived from a planar tetradentate non-heme ligand: reminiscence of heme chemistry

An Fe(III) nitro complex [(bpb)Fe(NO2)(py)] (2) of the tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzene (H2bpb, H is the dissociable amide proton) has been synthesized via addition of NaNO2 to [(bpb)Fe(py)2](ClO4) (1) in MeCN or DMF. This structurally characterized Fe(III) nitro complex exhibits its nuNO2 at 1384 cm(-1). The reaction of 1 with 2 equiv of Et4NX (X = Cl-, Br-) affords the high-spin complexes (Et4N)[(bpb)Fe(Cl2)] (3) and (Et4N)[(bpb)Fe(Br)2] (4), respectively. The structure of 4 has been determined. The addition of an equimolar amount of Et4NCl, Et4NBr, or Et4NCN to a solution of 2 affords the mixed-ligand complexes (Et4N)[(bpb)Fe(NO2)(Cl)] (5), (Et4N)[(bpb)Fe(NO2)(Br)] (6), and (Et4N)[(bpb)Fe(NO2)(CN)] (7), respectively. These complexes are all low spin with isotropic g values of 2.15. Under anaerobic conditions, the reactions of 5-7 with Ph3P in MeCN afford the five-coordinate {Fe-NO}7 nitrosyl [(bpb)Fe(NO)] (and Ph3PO) via secondary oxygen-atom (O-atom) transfer. The O-atom transfer to Ph3P by 5-7 becomes catalytic in the presence of dioxygen with transfer rates in the range of 1.70-13.59 x 10-3 min(-1). The O-atom transfer rates and turnover numbers (5 > 6 > 7) are reflective of the strength of the axial donors (Cl- > Br- > CN-). The catalytic efficiencies of complexes 5-7 are limited due to formation of the thermodynamic end products [(bpb)Fe(X)2]- (where X = Cl- for 5, Br- for 6, and CN- for 7).     

(Ph)3PBr][Br7], [(Bz)(Ph)3P]2[Br8], [(n-Bu)3MeN]2[Br20], [C4MPyr]2[Br20], and [(Ph)3PCl]2[Cl2I14]: extending the horizon of polyhalides via synthesis in ionic liquids

The five polyhalides [(Ph)(3)PBr][Br(7)], [(Bz)(Ph)(3)P](2)[Br(8)], [(n-Bu)(3)MeN](2)[Br(20)], [C(4)MPyr](2)[Br(20)] ([C(4)MPyr] = N-butyl-N-methylpyrrolidinium), and [(Ph)(3)PCl](2)[Cl(2)I(14)] were prepared by the reaction of dibromine and iodine monochloride in ionic liquids. The compounds [(Ph)(3)PBr][Br(7)] and [(Bz)(Ph)(3)P](2)[Br(8)] contain discrete pyramidal [Br(7)](-) and Z-shaped [Br(8)](2-) polybromide anions. [(n-Bu)(3)MeN](2)[Br(20)] and [C(4)MPyr](2)[Br(20)] exhibit new infinite two- and three-dimensional polybromide networks and contain the highest percentage of dibromine ever observed in a compound. [(Ph)(3)PCl](2)[Cl(2)I(14)] also consists of a three-dimensional network and is the first example of an infinite polyiodine chloride. All compounds were obtained from ionic liquids as the solvent that, on the one hand, guarantees for a high stability against strongly oxidizing Br(2) and ICl and that, on the other hand, reduces the high volatility of the molecular halogens.     

Synthetic, reactivity, and structural studies on half-sandwich (eta5-C5Me5)Be and related compounds: halide, alkyl, and iminoacyl derivatives

The half-sandwich compounds [(eta(5)-C(5)Me(5))BeX] (X=Cl, 1 a; Br, 1 b), readily prepared from the reaction of the halides BeX(2) and M[C(5)Me(5)] (M=Na or K), are useful synthons for other (eta(5)-C(5)Me(5))Be organometallic compounds, including the alkyl derivatives [(eta(5)-C(5)Me(5))BeR] (R=Me, 2 a; CMe(3), 2 b; CH(2)CMe(3), 2 c; CH(2)Ph, 2 d). The latter compounds can be obtained by metathetical exchange of the halides 1 with the corresponding lithium reagent and exhibit NMR signals and other properties in accord with the proposed formulation. Attempts to make [(eta(5)-C(5)Me(5))BeH] have proved fruitless, probably due to instability of the hydride toward disproportionation into [Be(C(5)Me(5))(2)] and BeH(2). The half-sandwich iminoacyl [(eta(5)-C(5)Me(5))Be(C(NXyl)Cp')] and [(eta(5)-C(5)Me(4)H)Be(C(NXyl)Cp')]3, 6 where Xyl=C(6)H(3)-2,6-Me(2) and Cp'=C(5)Me(5) or C(5)Me(4)H, are formed when the beryllocenes [Be(C(5)Me(5))(2)], [Be(C(5)Me(4)H)(2)], and [Be(C(5)Me(5))(C(5)Me(4)H)] are allowed to react with CNXyl. Isolation of three different iminoacyl isomers from the reaction of the mixed-ring beryllocene [(eta(5)-C(5)Me(5))Be(eta(1)-C(5)Me(4)H)] and CNXyl, namely compounds 5 a, 5 b, and 6, provides compelling evidence for the existence in solution of different beryllocene isomers, generated in the course of two very facile processes that explain the solution dynamics of these metallocenes, that is the 1,5-sigmatropic shift of the Be(eta(5)-Cp') unit around the periphery of the eta(1)-Cp' ring, and the molecular inversion rearrangement that exchanges the roles of the two rings.     

Ru(2) Bi(14) Br(4) ](AlCl(4) )(4) by Mobilization and Reorganization of Complex Clusters in Ionic Liquids

Two polymorphs of the new cluster compound [Ru(2) Bi(14) Br(4) ](AlCl(4) )(4) have been synthesized from Bi(24) Ru(3) Br(20) in the Lewis acidic ionic liquid [BMIM]Cl/AlCl(3) ([BMIM](+) : 1-n-butyl-3-methylimidazolium) at 140?°C. A large fragment of the precursor's structure, namely the [(Bi(8) )Ru(Bi(4) Br(4) )Ru(Bi(5) )](5+) cluster, dissolved as a whole and transformed into a closely related symmetrical [(Bi(5) )Ru(Bi(4) Br(4) )Ru(Bi(5) )](4+) cluster through structural conversion of a coordinating Bi(8) (2+) to a Bi(5) (+) polycation, while the remainder was left intact. Both modifications have monoclinic unit cells that comprise two formula units (α form: P2(1) /n, a=982.8(2), b=1793.2(4), c=1472.0(3)?pm, β=109.05(3)°; β form: P2(1) /n, a=1163.8(2), b=1442.7(3), c=1500.7(3), β=97.73(3)°). The [Ru(2) Bi(14) Br(4) ](4+) cluster can be regarded as a binuclear inorganic complex of two ruthenium(I) cations that are coordinated by terminal Bi(5) (+) square pyramids and a central Bi(4) Br(4) ring. The presence of a covalent Ru?Ru bond was established by molecular quantum chemical calculations utilizing real-space bonding indicator ELI-D. Structural similarity of the new and parent cluster suggests a structural reorganization or an exchange of the bismuth polycations as mechanisms of cluster formation. In this top-down approach a complex-structured unit formed at high temperature was made available for low-temperature use.