Effect of hydrostatic pressure on mechanical properties of plastics

The effect of hydrostatic pressure on the elastic and strength properties of plastics is investigated. Hydrostatic pressure is found to raise the modulus of elasticity, the tensile strength, and the elastic limit. Approximate equations for calculating the strength and elastic properties under various amounts of hydrostatic presure are proposed.Mekhanika polimerov, Vol. 1, No. 1, pp. 65–75, 1965     

Effect of extended storage on the mechanical properties of reinforced plastics

The effect of storage time (6–10 years) on the mechanical properties of KAST-V glass laminate, textolite, and SVAM glass-reinforced plastic has been experimentally investigated.Moscow Lomonosov State University. Translated from Mekhanika Polimerov, No. 3, pp. 556–558, May–June, 1969.     

Some mechanical properties of film-reinforced plastics

Model cylindrical shells have been wound from glass and Dacron (Mylar) film strip in accordance with a technique developed by the authors. A layer of glass-reinforced plastic, oriented in the direction of the circumferential tensile stresses, was applied to the outer cylindrical surface of the shells. Certain mechanical properties of the film plastics and their ability to cooperate with the glass-reinforced plastic outer layer were investigated by subjecting the shells to internal liquid pressure. The possibility of obtaining impermeable shells, equally strong in the axial and circumferential directions, was confirmed.Bauman Moscow Higher Technical College. Translated from Mekhanika Polimerov, No. 1, pp. 135–139, January–February, 1971.     

Effect of surface modification on the adhesion and mechanical properties of glass-reinforced plastics

The adhesion of an epoxy-polyester resin to glass fibers with clean and modified surfaces has been determined. The effect of this adhesion on some of the properties of glass-reinforced plastics (bending, tension, shear) is investigated.Mekhanika polimerov, Vol. 1, No. 1, pp. 93–99, 1965     

Effect of sign-variable thermocycling on the mechanical properties of carbon-fiber plastics with various layups

Conclusion An economic method for the ST of carbon-fiber-reinforced plastics is proposed in this study. It is established as a result of investigations of the mechanical properties of carbon-fiber-reinforced plastics with different layups, which are subjected to ST in the range to 100 cycles, that in the majority of cases, the number and duration of thermal cycles has no effect on the stiffness and strength in tension, compression, bending, and shear. The effect of number of thermal cycles was manifested only on the stiffness in tension and bending and also on the tensile, compressive, and bending strengths of the material with the obliquely reinforced structure loaded in the direction of the diagonal. It is permissible to use the dynamic method to assess variations in the stiffness of a material subjected to ST.Translated from Mekhanika Kompozitnykh Materialov, Vol. 29, No. 1, pp. 66–76, January–February, 1993.     

Regulation of the mechanical properties of thermoplastic carbon fiber-reinforced plastics by changing their production conditions and surface treatment of the fibers

The effect of technological parameters of processing and surface treatment of carbon fibers on the mechanical properties of carbon fiber-reinforced plastics (CFRPs) was investigated. The copolymer of 1,3,5-trioxane with 1,3-dioxolane was used as the polymer matrix, and medium-modulus hydrated cellulose Ural LO-24 carbon fibers served as the reinforcing filler. The polymer matrix was mixed with the carbon fibers by the method of combined extrusion. The dependence of the mechanical properties of CFRPs on the technological parameters of screw-disk extrusion was studied. It was found that the properties of the composites were greatly affected by the size of the working disk gap, the disk rotation rate, and the temperature in the zone of normal stresses. The surface of the carbon fibers was activated with atmospheric oxygen in the temperature range of 450–600°C, with mass loss of the fibers no greater than 3–4%. A 30–40% increase in the mechanical properties of the CFRPs was achieved. A decrease in the melt index of the 1,3,5-trioxane copolymer with 1,3-dioxolane reinforced with oxidized carbon fibers was observed, which should be taken into account in processing the composites into products. Introduction of carbon fibers in the 1,3,5-trioxane copolymer with 1,3-dioxolane allows us to increase the wear resistance and decrease the friction coefficient, which makes it possibile to use these materials in the friction units of machines and mechanisms, such as plain bearings, gears, and flange packings.Presented at the 10th International Conference on the Mechanics of Composite Materials (Riga, April 20–23, 1998).Ukrainian State University of Chemical Technology, Dnepropetrovsk, Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 34, No. 5, pp. 673–682, September–October, 1998.     

Effect of stability of the structural parameters of laminated reinforced plastics on their strength properties

Conclusion As a result of the completed analysis, we estimated the effect of scatter of the strength properties of the layers, instability of the layers' strain properties, and instability of the geometry of the structure on the strength properties of multidirectional LRP's in a plane stress state. It was established that instability of the structural parameters produces two negative tendencies: a reduction in the mean values of LRP strength and an increase in their scatter. From the viewpoint of ensuring the reliability of structures (structural elements) made of such materials, these tendencies reinforce one another and are thus even more dangerous. It follows from this that the production method employed should not only (or not even mainly) solve the problem of increasing the values of the parameters of the materials (and their semifinished structural elements), it should also address the problem of alleviating their instability — improving the quality of production.The numerical analysis established the limits at which it is necessary to account for instability of structural parameters in engineering calculations: for the strain properties of the layers — a coefficient of variation of the elastic modulus greater than 10%; for the scatter of the angles of orientation of the layers — a standard deviation greater than 5 °. These numerical results and the computer program developed may prove useful in evaluating the actual properties of structural parameters determined in indirect tests of LRP's, as well as in more adequately comparing empirical data with corresponding calculations based on structural theories. The development of such an approach to analyzing the strength properties of multidirectional LRP's in bending also holds promise.Translated from Mekhanika Kompozitnykh Materialov, No. 4, pp. 659–666, July–August, 1990.     

Statistical characteristics of the mechanical properties of glass-reinforced plastics

A statistical analysis has been made of experimental data on the mechanical properties of a glass-reinforced plastic based on T₁ glass fabric (Soviet standard GOST 8481-61) and IF-ÉD-6 epoxy resin (Elektroizolit Plant, tech. spec. TU 26-59) obtained by testing specimens cut from the waste of wound cylindrical shells. The data obtained can be used for estimating the mechanical reliability of products composed of glass-reinforced plastics of this type.Moscow. Translated from Mekhanika Polimerov, No. 1, pp. 131–134, January–February, 1971.     

Region of linearity of the mechanical properties of reinforced plastics

The region of linearity of the viscoelastic properties of KAST-V glass laminate, textolite, and SVAM glass-reinforced plastic has been experimentally determined.Moscow Lomonosov State University. Translated from Mekhanika Polimerov, Vol. 5, No. 2, pp. 366–370, March–April, 1969.     

Cutting of aramide fiber-reinforced plastics by Co2 laser

Comparative characteristics of aramide fiber reinforced plastics (AFRP) made by laser cutting or machining are presented. It is found that the strength of the specimens cut out by laser is 4–25% higher, while the moisture absorption is at least 2 times lower as compared to those cut out by machining. The deviation of the cutting edge size for AFRP 2 mm thick does not exceed 0.4 mm. Calculated and experimental data are given. The possibilities and conditions of cutting the AFRP up to 6 mm thick are determined.Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 3, pp. 375–384, May–June, 1999.     

Special features of the effect of cellular structure on the mechanical properties of foamed plastics

On the basis of the cell model proposed the mechanical characteristics of high-density foamed plastics are calculated. Assuming the general application of the foaming mechanism and the formation of macrostructure, the principle of structural-mechanical superposition of foamed plastics is established. This enables the equivalence of changes in their strength and elastic properties to be indicated over a wide range of variation of the stiffness of the polymer base and the apparent density of the foamed material.Scientific-Research Institute for Synthetic Resins, Vladimirsk. Translated from Mekhanika Polimerov, No. 6, pp. 976–981, November–December, 1972.