Coordinatively Unsaturated Polynuclear Mixed-Valent Sn<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> and Cu<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> Oxo-Centered Carboxylates

The tetranuclear mixed-valent oxo-cluster [Sn^IISn^IVO(O₂CCF₃)₄]₂ (1) has been prepared by reacting SnCl₂ with AgO₂CCF₃ in a sealed ampoule at 90 °C. Alternatively, 1 was obtained by acidolysis of Ph₃SnSnPh₃ with trifluoroacetic acid in solution. The X-ray diffraction study of 1 revealed the presence of a Sn^IIOSn₂^IVOSn^II core comprised of the penta-coordinated divalent and six-coordinated tetravalent tin atoms. The ¹¹⁹Sn NMR studies confirmed the stability of the cluster in solution and the presence of two different oxidation states of tin. An acidolysis of Ph₃SnSnPh₃ in the presence of [Cu₂^II(O₂CCF₃)₄] followed by sublimation of the resulting product at 90 °C afforded the first trinuclear mixed metal Sn–Cu cluster [(C₆H₅)₂Sn₂^IVCu^IIO(O₂CCF₃)₆] (2). The X-ray diffraction analysis of 2 revealed the presence of two phenyl groups attached to the six-coordinated tin(IV) atoms and the tetragonal pyramidal environment of the copper(II) atom. Both complexes have been obtained free of exogenous ligands.     

Cyclotron production of <Superscript>211</Superscript>At/<Superscript>211g</Superscript>Po by <Superscript>209</Superscript>Bi(α,2n) reaction

Astatine-211 (T _1/2 = 7.214 h) is an α-emitter at secular equilibrium by EC with its ultra-short-lived α-emitting daughter, polonium-211g (T _1/2 = 0.516 s), with a high Linear Energy Transfer (LET — 130 eV·nm⁻¹) and a half-life suitable for metabolic radiotherapy; the overall α branching of the ²¹¹At/^211gPo system is 100%. The direct production of ²⁰⁹Bi(α,2n)²¹¹At/^211gPo seems the most satisfactory method; Bi targets were irradiated at JRC-Ispra Cyclotron of European Commission, EC, using α-energy higher than 28.61 MeV in order to produce, via ²⁰⁹Bi(α,3n) reaction, small amounts of the γ-emitter ²¹⁰At (used as internal spike).     

Preparation of <Superscript>235m</Superscript>U targets for <Superscript>235</Superscript>U(n,n′)<Superscript>235m</Superscript>U cross section measurements

This paper describes the preparation of samples for an experiment to measure the cross-section for ²³⁵U(n,n′)^235mU in a fast fission spectrum of neutrons provided by a fast pulsed reactor/critical assembly. Samples of ^235mU have been prepared for the calibration of the internal conversion electron detector that is used for the ^235mU measurement. Two methods are described for the preparation of ^235mU. The first method used a U-Pu chemical separation based on anion-exchange chromatography and the second method used an alpha recoil collection method. Thin, uniform samples of ^235mU+²³⁵U were prepared for the experiment using electrodeposition.     

Synthesis,structural and multinuclear natural abundance (<Superscript>13</Superscript>C, <Superscript>31</Superscript>P, <Superscript>195</Superscript>Pt) CP/MAS NMR studies of crystalline O,O′-dialkyldithiophosphate platinum(II) complexes

Platinum(II) O,O′-dicyclohexyl dithiophosphate [Pt{S₂P(O-cyclo-C₆H₁₁)₂}₂] (I) and platinum(II) O,O′-diisopropyl dithiophosphate [Pt{S₂P(O-iso-C₃H₇)₂}₂] (II) complexes were obtained and studied by solidstate ¹³C, ³¹P, and ¹⁹⁵Pt CP/MAS NMR spectroscopy. The dithiophosphate (Dtph) ligands in molecular structure I were found to be coordinated by platinum in S,S′-bidentate fashion to form the planar chromophore [PtS₄] (single-crystal X-ray diffraction data). For complex II, a new α-form (α-II) was obtained and identified by ³¹P MAS NMR spectroscopy. The ³¹P chemical shift anisotropy δ_aniso and the asymmetry parameter η of the ³¹P chemical shift tensor were calculated from the whole MAS spectra.     

A simple and quick method for the preparation of radionuclide <Superscript>87</Superscript>Y/<Superscript>87m</Superscript>Sr generator using the <Superscript>nat</Superscript>Rb(α,xn)<Superscript>87</Superscript>Y reaction

A rapid method for the preparation of ⁸⁷Y/^87mSr radionuclide generator from a rubidium chloride target irradiated with 35 MeV α-particles is described. A simple two-step procedure is used to obtain a carrier-free ^87mSr isotope with a high enough radiochemical yield and high purity in the final aqueous fraction.     

Validation of <Superscript>239,240</Superscript>Pu, <Superscript>238</Superscript>Pu separation method using molecular recognition product AnaLig<Superscript>®</Superscript> Pu02 gel and extraction chromatography TRU<Superscript>®</Superscript> resin

Two separation techniques for plutonium determination using AnaLig^® Pu02 molecular recognition technology product (MRT) and extraction chromatography TRU^® resin were tested. The methods performance was investigated by analysis of National Physical Laboratory (NPL-Alpha-Beta High, ABH 2003, 2005) intercomparison test samples. The results obtained for both procedures were compared in terms of activities and recoveries. Data analysis showed good agreement with the reference values. The AnaLig^® Pu02 separation method for ^239,240Pu, ²³⁸Pu determination was successfully validated with the same performance as the TRU^® resin method.     

Production possibility of <Superscript>186</Superscript>Re via the <Superscript>192</Superscript>Os(p,α3n)<Superscript>186</Superscript>Re nuclear reaction

Experimentally measured cross-sections are presented for the first time for the ¹⁹²Os(p,α3n)¹⁸⁶Re nuclear reaction up to 67 MeV. Highly enriched thin ¹⁹²Os targets (15 pcs), prepared by electro-deposition onto Cu backings, were irradiated with an external proton beam delivered by the SSC cyclotron of iThemba LABS. The excitation function curve of the ¹⁹²Os(p,α3n)¹⁸⁶Re reaction shows a maximum cross-section of ~82 mb at about 24 MeV. According to the yield calculations based on the present results, the available cumulative no-carrier-added ¹⁸⁶Re yield is 7.76 MBq/μAh (0.21 mCi/μAh) over the energy region 13.4 → 27.3 MeV.     

<Superscript>13</Superscript>C-labeled bilirubin: synthesis of 3<Superscript>1</Superscript>(3<Superscript>2</Superscript>),17<Superscript>1</Superscript>(17<Superscript>2</Superscript>)-di-[<Superscript>13</Superscript>C]-mesobilirubin-XIIIα

Abstract  The title compound, labeled with ¹³C in the ethyl groups was synthesized from K¹³CN and low-molecular-weight components. The synthetic relay compound was 3¹(3²)[¹³C]-xanthobilirubinic acid methyl ester in a synthetic route that leads to a label in the ethyl β-substituent of a dipyrrinone model for bilirubin. This labeled dipyrrinone was oxidatively coupled to the dimethyl ester of mesobiliverdin-XIIIα, thereby providing a route to a ¹³C-labeled mesobiliverdin and mesobilirubin, with one carbon of each ethyl being 98% ¹³C-enriched. Graphical Abstract        

Structure and stability of endohedral complexes <Superscript>4/2</Superscript>X@(HAlNH)<Subscript>2</Subscript> (X = N,P, As,C<Superscript>−</Superscript>, Si<Superscript>−</Superscript>)

The structures of a closo-hedral cluster (HAlNH)₁₂ and endohedral complexes ^4/2X@(HAlNH)₁₂ (X = N, P, As, C⁻, Si⁻) are studied by density functional theory (DFT) at the B3LYP/6-31G(d) level. The geometries, natural bond orbital (NBO), vibrational frequency (ν₁), energetic parameters, magnetic shielding constants (σ), and nucleus independent chemical shifts (NICSs) are discussed. It is found that all guest species are minima at the cage center. Inclusion energies (ΔE _inc) of all species are negative except those of ⁴N and ^4/2P. In all species, the endohedral quartet states (⁴X) are energetically less favorable than their doublet states (²X). The calculations predict that caged X states only donate <0.50 e to the cage and preserve their unencapsulated ground states.     

Synthesis of the [<Superscript>2</Superscript>H,<Superscript>15</Superscript>N]-labeled antiviral drug “triazavirine”

Selective methods for the incorporation of stable isotopes ¹⁵N and ²H into the structure of antiviral medicine “triazavirine” 1 were developed. The synthesized isotopically modified “triazavirine” 1– ² H ₃ , ¹⁵ N ₃ contained the labeled atoms in both the azole and the azine rings. ¹³C and ¹⁵N NMR spectra of the isotope-containing sample 1– ² H ₃ , ¹⁵ N ₃ were thoroughly analyzed.     

Soil-to-mushroom transfer of <Superscript>137</Superscript>Cs, <Superscript>40</Superscript>K,alkali–alkaline earth element and heavy metal in forest sites of Izmir,Turkey

The present work is devoted to an investigation on the soil to mushroom transfer parameters for ¹³⁷Cs and ⁴⁰K radionuclides, as well as for some stable elements and heavy metals. The results of transfer factors for ¹³⁷Cs and ⁴⁰K were within the range of 0.06–3.15 and 0.67–5.68, respectively and the most efficiently transferred radionuclide was ⁴⁰K. The TF values for ¹³⁷Cs typically conformed to a lognormal distribution, while for ⁴⁰K showed normal distribution. Statistically significant correlations between ¹³⁷Cs soil to mushroom transfer factors and agrochemical soil properties have been revealed. Although the concentration ratios varied within the species, the most efficiently transferred elements seems to have been K, followed by Rb, Zn, Cu, Cd, S, Cs and Hg.     

Thermodynamic Properties of Zincate-Manganites of LaM<Subscript>2</Subscript> <Superscript>II</Superscript>ZnMnO<Subscript>6</Subscript> (М<Superscript>II</Superscript> = Mg,Ca, Sr,Ba) Composition

Temperature dependences of the heat capacity of new zincate-manganites of LaM₂^IIZnMnO₆ (M^II = Mg, Ca, Sr, Ba) composition are studied via experimental calorimetry in the interval of 298.15–673 K. It is found that all compounds have λ-shape effects on the curve of dependence C_p° ~ ?(T) with respect to phase transitions of the second kind. Equations for the temperature dependence of the heat capacity are derived with allowance for phase transition temperatures, and thermodynamic functions H°(T) ? H°(298.15), S°(T) and Φ^xx(T) are calculated on the basis of experimental data on C_p°(T) and the calculated S°(298.15) value.     

Platinum(II) O,O′-diisobutyl dithiophosphate: Synthesis,structure, thermal properties,and solid-state <Superscript>13</Superscript>C, <Superscript>31</Superscript>P,and <Superscript>195</Superscript>Pt CP/MAS NMR spectra. Model of the structural state of platinum in cooperite

The complex bis(O,O′-diisobutyl dithiophosphato)platinum(II) (I) was obtained and characterized by solid-state ¹³C, ³¹P, and ¹⁹⁵Pt CP/MAS NMR spectroscopy. In complex I, the dithiophosphate fragments are structurally equivalent with a predominantly orthorhombic tensor of the ³¹P chemical shift (η = 0.73). The tensor of the ¹⁹⁵Pt chemical shift approximates to an axially symmetric one (for δ_zz> δ_xx and δ_yy), which suggests the existence of square chromophores [PtS₄], as in cooperite (natural PtS). The crystal and molecular structures of complex I were determined from X-ray diffraction data. The Pt atom coordinates two Dtph ligands in a S,S′-anisobidentate fashion (the Pt-S bonds are nonequivalent: 2.315 and 2.329 Å) to form two four-membered chelate rings [PtS₂P] with platinum as a spiro atom. The P-S bond length (1.997 and 1.986 Å), which is intermediate between the idealized lengths of the single and double phosphorus-sulfur bonds, suggests the delocalization of the π-electron density in the structural fragments PS₂. In complex I, the electron shielding of the platinum nucleus in the direction perpendicular to the plane of the chromophore [PtS₄] was found to be noticeably higher than that in cooperite. The thermal properties of complex I were examined by combined DSC-TG thermal analysis. The intermediate product of the thermolysis of complex I was platinum(II) dithiometaphosphate [Pt(S₂PO)₂] and the final thermolysis product was PtS.     

Heat capacities and thermodynamic functions of new nanosized ferro-chromo-manganites LaM<Subscript>0.5</Subscript><Superscript>II</Superscript>FeCrMnO<Subscript>6.5</Subscript> (M<Superscript>II</Superscript>–Mg,Ca, Sr,Ba)

The heat capacities of nanosized ferro-chromo-manganites LaM_0.5 ^IIFeCrMnO_6.5 (M^II–Mg, Ca, Sr, Ba) are measured via dynamic calorimetry in the temperature range of 298.15–673 K using an IT-S-400 instrument. It is established that the C°_p~f(T) function of LaM_0.5 ^IIFeCrMnO_6.5 (M^II–Mg, Ca, Sr, Ba) has λ-type effects, due probably to phase transitions of the second order. Considering the temperatures of the phase transitions, equations of the heat capacity of ferro-chromo-manganites LaM_0.5 ^IIFeCrMnO_6.5 (M^II–Mg, Ca, Sr, Ba) as a function of temperature are derived on the basis of experimental data. Thermodynamic functions Н°(Т)–Н°(298.15), S°(Т), and Ф ^хх(Т) are calculated in the temperature range of 298.15–675 K.     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

Synthesis,X-ray analysis,and quantum-chemical DFT study of features in formation of a binuclear phenanthroline complex with a V<Superscript>IV</Superscript>–O–V<Superscript>V</Superscript> core

A new mixed-valence complex [(O)(phen)₂V^IV(μ-O)V^V(O)phen)(mal)]⁺ was synthesized and characterized by the X-ray structural analysis. Its geometric structure was simulated by the DFT M06/6-31G(d,p) method. Comparison of calculated and experimental data made it possible to draw a conclusion on the oxobridging nature of the bond between vanadium fragments and to confirm the value of the target compound charge. The energy characteristics of cation formation reactions in solution were estimated. It was found that the oxidation of V^IV to V^V assists subsequent substitution of ligands. Joining [(O)V^IV(phen)₂]²⁺ and [(O)V^V(O)(phen)(mal)]^– particles proceeds by the donor-acceptor mechanism.     

Thermochemical study of mixed-ligand complex formation in the system M<Superscript>2+</Superscript>-Nta<Superscript>3−</Superscript>-En (M = Ni,Cu, Zn,or Cd) in aqueous solution

Direct calorimetric data were used to calculate the heats of formation for mixed-ligand complexes MNtaEn^?, where Nta^3? is nitrilotriacetato ion, En is ethylenediamine, and M²⁺ = Ni²⁺, Zn²⁺, Cu²⁺, or Cd²⁺, in aqueous solution at 298.15 K and ionic strength I = 0.5 (NaNO₃). The complete set of thermodynamic parameters of reaction was calculated for mixed-ligand complex formation and comproportionation.     

Relativistic coupled cluster calculations of the electronic structure of KrH<Superscript>+</Superscript>, XeH<Superscript>+</Superscript> and RnH<Superscript>+</Superscript>

Potential energy curves of NgH⁺ cations (Ng = Kr, Xe, Rn) were obtained by using four-component relativistic CCSD(T) coupled cluster calculations. Dissociation energies, equilibrium bond lengths, electronic properties, such as dipole moments and electric field gradients at the nuclei, and the related spectroscopic parameters of the electronic ground state have been determined. The results obtained for KrH⁺ and XeH⁺ are in good agreement with available experimental data, while those for RnH⁺ have been determined for the first time at this level of theory.     

Utilization of (p, 4n) reaction for <Superscript>86</Superscript>Zr production with medium energy protons and development of a <Superscript>86</Superscript>Zr → <Superscript>86</Superscript>Y radionuclide generator

Utilization of (p, 4n) reaction channel for the production of medical radionuclides became very attractive with commercial availability of medium energy cyclotrons. Significantly higher yields and radionuclidic purity may open new perspectives for several novel and some of the radionuclides previously have not been considered due to production difficulties. In present work, we show the proof-of-principle study on the production of ⁸⁶Y for Positron Emission Tomography imaging via radionuclide generator ⁸⁶Zr → ⁸⁶Y. Production suitability of ⁸⁶Zr from natural yttrium target and radiochemical separation strategies were tested. In addition, two generator systems were proposed and evaluated.     

Cis→Trans Isomerization of Pro<Superscript>7</Superscript> in Oxytocin Regulates Zn<Superscript>2+</Superscript> Binding

Ion mobility/mass spectrometry techniques are employed to investigate the binding of Zn²⁺ to the nine-residue peptide hormone oxytocin (OT, Cys¹-Tyr²-Ile³-Gln⁴-Asn⁵-Cys⁶-Pro⁷-Leu⁸-Gly⁹-NH₂, having a disulfide bond between Cys¹ and Cys⁶ residues). Zn²⁺ binding to OT is known to increase the affinity of OT for its receptor [Pearlmutter, A. F., Soloff, M. S.: Characterization of the metal ion requirement for oxytocin-receptor interaction in rat mammary gland membranes. J. Biol. Chem. 254, 3899–3906 (1979)]. In the absence of Zn²⁺, we find evidence for two primary OT conformations, which arise because the Cys⁶–Pro⁷ peptide bond exists in both the trans- and cis-configurations. Upon addition of Zn²⁺, we determine binding constants in water of K_A = 1.43 ± 0.24 and 0.42 ± 0.12 μM^?1, for the trans- and cis-configured populations, respectively. The Zn²⁺ bound form of OT, having a cross section of Ω = 235 Ų, has Pro⁷ in the trans-configuration, which agrees with a prior report [Wyttenbach, T., Liu, D., Bowers, M. T.: Interactions of the hormone oxytocin with divalent metal ions. J. Am. Chem. Soc. 130, 5993–6000 (2008)], in which it was proposed that Zn²⁺ binds to the peptide ring and is further coordinated by interaction of the C-terminal, Pro⁷-Leu⁸-Gly⁹-NH₂, tail. The present work shows that the cis-configuration of OT isomerizes to the trans-configuration upon binding Zn²⁺. In this way, the proline residue regulates Zn²⁺ binding to OT and, hence, is important in receptor binding.

Open image in new window

Graphical Abstract ?