Thermotropic phase behaviour of sodium oleate as studied by FT-Raman spectroscopy and X-ray diffraction

The thermotropic behaviour of sodium oleate (NaOl) has been studied in the temperature range 10–125°C by using Fourier transform-Raman spectroscopy, X-ray diffraction and differential scanning calorimetry (DSC). The temperature dependence of conformationally sensitive bands in the CH₂ stretching (2800–2900 cm⁻¹), C–C stretching (1050–1150 cm⁻¹) and CH₃ rocking region (830–900 cm⁻¹) has been used to characterize the order/disorder behaviour of alkyl chains. It is found that in phase I, NaOl exhibits the crystalline ordered lamellar structure with a repeat period of 4.51 nm. The first broad peak in the DSC trace is due to superposition of two transitions (phase I to phase II and phase II to phase III), therefore, it is not possible to determine the lamellar structure of phase II. This broad transition from phase I to phase III is associated with the melting of methyl-sided chains and increase in gauche conformers in carboxylate-sided chains. Finally, NaOl undergoes a transition from crystalline to a liquid crystalline phase IV, which is associated with the melting of the carboxylate-sided chain.     

High-field EPR investigation of a series of mononuclear Mn(II) complexes doped into Zn(II) hosts

The five-coordinate mono-halide mononuclear Zn(II) complexes [Zn(tpa)X]⁺ (tpa = tris(2-pyridylmethyl)amine; X = I ([Zn(tpa)I]I; 1a), Br ([Zn(tpa)Br](ZnBr₄)_0.5; 2a) and Cl ([Zn(tpa)Cl](ZnCl₄)_0.5; 3a)) and the six-coordinate mononuclear complex [Zn(tpa)(NCS)₂] (4a) have been synthesized and characterized by X-ray crystallography. The [Zn(tpa)X]⁺ complexes doped with the corresponding [Mn(tpa)X₂] complexes (X = I (1b), Br (2b) and Cl (3b)) have been synthesized and their electronic properties investigated by multifrequency high field EPR (HF-EPR) (95–285 GHz). The magnetically diluted conditions allow the determination of the hyperfine coupling constant A (A = 68.10⁻⁴ cm⁻¹ for 1b–3b). The zero-field splitting parameters (D and E) found for 1b–3b are comparable to those found for neat samples of the [Mn(tpa)X₂] complexes (1b: D = 0.635 cm⁻¹, E/D = 0.189; 2b: D = 0.360 cm⁻¹, E/D = 0.192; 3b: D = 0.115 cm⁻¹, E/D = 0.200). The efficacy of using multifrequency EPR under dilute conditions to precisely determine spin Hamiltonian parameters is discussed.     

Far infrared spectra, conformational equilibria, vibrational assignments, ab initio calculations and structural parameters for 2-bromoethanol

The far infrared spectrum from 370 to 50 cm⁻¹ of gaseous 2-bromoethanol, BrCH₂CH₂OH, was recorded at a resolution of 0.10 cm⁻¹. The fundamental O–H torsion of the more stable gauche (Gg′) conformer, where the capital G refers to internal rotation around the C–C bond and the lower case g to the internal rotation around the C–O bond, was observed as a series of Q-branch transitions beginning at 340 cm⁻¹. The corresponding O–H torsional modes were observed for two of the other high energy conformers, Tg (285 cm⁻¹) and Tt (234 cm⁻¹). The heavy atom asymmetric torsion (rotation around C–C bond) for the Gg′ conformer has been observed at 140 cm⁻¹. Variable temperature (−63 to −100°C) studies of the infrared spectra (4000–400 cm⁻¹) of the sample dissolved in liquid xenon have been recorded. From these data the enthalpy differences have been determined to be 411±40 cm⁻¹ (4.92±0.48 kJ/mol) for the Gg′/Tt and 315±40 cm⁻¹ (3.76±0.48 kJ/mol) for the Gg′/Tg, with the Gg′ conformer the most stable form. Additionally, the infrared spectrum of the gas, and Raman spectrum of the liquid phase are reported. The structural parameters, conformational stabilities, barriers to internal rotation and fundamental frequencies have been obtained from ab initio calculations utilizing different basis sets at the restricted Hartree–Fock or with full electron correlation by the perturbation method to second order. The theoretical results are compared to the experimental results when appropriate. Combining the ab initio calculations with the microwave rotational constants, r₀ adjusted parameters have been obtained for the three 2-haloethanols (F, Cl and Br) for the Gg′ conformers.     

Far infrared spectroscopy on hemoproteins: A model compound study from 1800–100 cm

Infrared spectroscopy measurements on different hemoproteins and models of the active side have been completed for the spectral range from 1800 to 100 cm⁻¹ giving an overview on the contributions expected in the low frequency range. Little is known of the low frequency contribution of proteins in infrared. In order to detect the contributions of heme centers and protein moiety, a systematic study of the infrared spectroscopic properties of the porphyrin ring, the ferric porphyrines with different ligands (hemine and hematine), a heme with 11 amino acids (microperoxidase-11), cytochrome c and cytochrome c oxidase are compared at different pD values and an overview on the relative contributions of hemes, their ligands and the protein site can be provided in the low frequency region. Beside the well know amide I and II modes, the low frequency range is found to be dominated by the amide IV and VI mode around 530/580 cm⁻¹ for cytochrome c and cytochrome c oxidase, as well as further proteins like ferrodoxin. Below 300 cm⁻¹ amide VII modes, doming modes of the heme site and hydrogen-bonding signatures overlap to a broad peak with covering 100–250 cm⁻¹. As clear markers for the iron ligands, bands can be depicted at 388/378 cm⁻¹ (FeN, histidine ligand) and 345 cm⁻¹ FeCl. Furthermore the ring vibration of the protonated histidine is determined at 623 cm⁻¹.     

Vibrational frequencies of CO adsorbed on silica supported Mo atoms from density functional calculations

The interaction of CO with silica supported molybdenum atoms has been studied by means of density functional calculations and cluster models. Experimentally two bands in the IR spectra of adsorbed CO have been observed at 2170 and 1990 cm⁻¹ with vibrational shifts of +27 and −153 cm⁻¹, respectively, with respect to the gas-phase molecule, the peak at +27 cm⁻¹ has been related to the presence of neutral Mo atoms anchored to two oxygen atoms of the SiO₂ substrate. Possible reactive sites at the Mo/SiO₂ interface have been explored as candidates for CO adsorption. Mo atoms in various formal oxidation states, from +II to +VI, have been considered. Both molecular and cluster models of the Mo/SiO₂ interface have been employed. The analysis shows that a neutral Mo(II) atom, proposed to be responsible for the blue-shift of ν(CO), is not likely to be the origin of the IR band at 2170 cm⁻¹. Only Mo atoms in high oxidation states or Mo cations carrying a real positive charge can account for the positive shifts in the CO frequency.     

Microwave spectrum and rotational isomers of ethyl fluoroformate

The microwave spectrum of ethyl fluoroformate displays strong a-type R branch transitions from two rotameric forms. One species (extended form) has rotational constants A₀ = 9191.3(9) MHz, B₀ = 2112.61(1) MHz, C₀ = 1756.73(1) MHz which are consistent with a syn-anti (τ₁(OCOC) = 0°, r₂(cocc) = 180°) planar heavy atom structure. The second species (compact form) has rotational constants A₀ = 7760(3) MHz, B₀ = 2388.38(4) MHz, C₀ = 2102.47(3) MHz which are consistent with a syn-gauche (τ₁(ococ) = 0°, τ₂(cocc) ˜ 90°) structure. The two conformational forms have approximately equal energy (0 ± 40 cm⁻¹). Four vibrational satellites of the extended species have been analyzed yielding a torsional frequency around the O-ethyl bond of 70(10) cm⁻¹. Three vibrational satellites attributed to the O-ethyl torsion of the compact species have been analyzed yielding a vibrational frequency of 90(10) cm⁻¹. Approximate Fourier coefficients of a three term potential function for internal rotation about the O-ethyl bond have been determined. Vibrational satellites attributed to the first excited states of the O-ester torsion have been analyzed for both conformers. The torsional vibrational frequency around the O-ester bond is 110(15) cm⁻¹ for the extended conformers and 120(20) cm⁻¹ for the compact.     

Application of a new resin functionalised with 6-mercaptopurine for mercury and silver determination in environmental samples by atomic absorption spectrometry

Polystyrene–divinylbenzene (8%) has been functionalised by coupling it through an ---N=N--- group with 6-mercaptopurine. The resulting chelating resin has been characterised by using elemental analysis, thermogravimetric analysis and infrared spectra. The resin is highly selective for Hg(II) and Ag(I) and has been used for preconcentrating Hg(II) and Ag(I) prior to their determination by atomic absorption spectrometry. The maximum sorption capacity for Hg(II) and Ag(I) was found to be 1.74 and 0.52 mmol g⁻¹, respectively, over the pH range 5.5–6.0. The calibration range for Hg(II) was linear up to 10 ng ml⁻¹ with a 3σ detection limit of 0.02 ng ml⁻¹; the calibration range for Ag(I) was linear up to 5 μg ml⁻¹ with a detection limit of 29 ng ml⁻¹. The recoveries of the metals were found to be 99.7±3.8 and 101.3±4.1% at the 95% confidence level for both Hg(II) and Ag(I). In column operation, it has been observed that Hg(II) and Ag(I) in trace quantities can be selectively separated from geological, medicinal and environmental samples.     

Conformational studies of cyclopropylmethyl isocyanate from temperature dependent FT-IR spectra of xenon solutions and ab initio calculations

Variable temperature (−55 to −100 °C) studies of the infrared spectra (3200 to 100 cm⁻¹) of cyclopropylmethyl isocyanate, c-C₃H₅CH₂NCO, dissolved in liquefied xenon, have been carried out. The infrared spectra (gas and solid) as well as the Raman spectrum of the liquid have been recorded from 3200 to 100 cm⁻¹. By analyzing six conformer pairs in xenon solutions, an enthalpy difference of 193 ± 19 cm⁻¹ (2.31 ± 0.23 kJ/mol) was obtained with the gauche–cis rotamer (the first designation indicates the orientation of the CNCO group with respect to the three-membered ring, the second designation indicates the relative orientation of the NCO group with respect to the bridging CC bond) the more stable form and the only form present in polycrystalline solid. The abundance of the cis–trans conformer present at ambient temperature is 16 ± 1%. The potential function governing the conformational interchange has been obtained from B3LYP/6-31G(d) calculations and the two-dimensional potential has been obtained. From MP2 ab initio calculations utilizing various basis sets with diffuse functions, the gauche–cis conformer is predicted to be more stable by 223 to 269 cm⁻¹, which is consistent with the experimental results. However, without diffuse functions the predicted conformational energy differences are much smaller (77–166 cm⁻¹). Similar diffuse function dependency affects density functional theory calculations by the B3LYP method to a lesser extent. A complete vibrational assignment for the gauche–cis conformer is proposed and several fundamentals for the cis–trans conformer have been identified. The structural parameters, dipole moments, conformational stability, vibrational frequencies, infrared intensities and Raman activities have been predicted from ab initio calculations and r₀ structural parameters are estimated. These experimental and theoretical results are compared to the corresponding quantities of some similar molecules.     

Extraction and spectrophotometric determination of cobalt(II) with isonitroso-5-methyl-2-hexanone

A simple and selective method is proposed for the extraction of cobalt(II) for its spectrophotometric determination using (HIMH) as an extractant. Cobalt(II) forms a yellow coloured complex with HIMH which can be extracted into chloroform. The calibration curve is rectilinear in the concentration range 0.1–5.0 μg ml⁻¹ of cobalt(II). The extracted species shows an absorption maximum at 400 nm with molar absorptivity of 1.135×10⁴ l mol⁻¹ cm⁻¹. The method has been applied for the determination of cobalt in synthetic mixtures, pharmaceutical, biological and high speed steel samples.     

Conformational and structural studies of 1-chloropropane and 1-bromopropane from temperature-dependant FT-IR spectra of rare gas solutions and ab initio calculations

Variable temperature (−55 to −150°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-chloropropane (CH₃CH₂CH₂Cl) and 1-bromopropane (CH₃CH₂CH₂Br) dissolved in liquid krypton and xenon, respectively, have been recorded. Utilizing two conformer pairs in krypton solution for chloride and three conformer pairs in xenon solution for bromide, enthalpy differences of 52±3 cm⁻¹ (0.62±0.06 kJ/mol) and 72±7 cm⁻¹ (0.86±0.08 kJ/mol) were obtained for the chloride and bromide, respectively, with the gauche form being the more stable conformer for both molecules. From these data, it is estimated that 28 and 26% of trans form are present at ambient temperature for the chloride and bromide, respectively. The conformation stabilities, harmonic force constants, fundamental frequencies, infrared intensities and Raman activities have been obtained from RHF/6-31G(d) and/or MP2/6-31G(d) ab initio calculations for both halopropanes and these quantities have been compared to the experimental values when appropriate. The optimized geometries have also been obtained with several different ab initio basis sets with full electron correlation by the perturbation method up to MP2/6-311+G(2d,2p). The r₀ structural parameters of both halopropanes have been obtained by combining the ab initio data with the previously reported microwave rotational constants for both conformers. The quantities are compared to the corresponding results for some similar molecules.     

FTIR investigation of the conformational properties of the cyanide bound human hemoglobin

Infrared spectra at 4 cm⁻¹ resolution of the cyanide ligated human methemoglobin (Hb-CN) were examined in the C---N stretching region. The FTIR spectra of hemoglobin ligated with the various isotopomeric forms of the cyanide ion support the existence of three conformational states for Hb-CN. In potassium phosphate buffer at pH of 7.5, the three bands were observed at 2116, 2122 and 2127 cm⁻¹ for natural abundance Hb-CN. These bands shift to 2086, 2091 and 2095 cm⁻¹ for Hb-¹²C¹⁵N and 2073, 2077 and 2081 cm⁻¹ for Hb-¹³C¹⁴N. Two extra bands have been identified in the IR spectra of solid Hb-CN in KBr pellets. The peaks persist in the pH range between 3.5 and 10.5 with small changes in frequency and intensity. The appearance of several C---N stretching bands is consistent with C---N vibrators residing in different environment and support the hypothesis that Hb-CN assumes multiple conformers under the conditions studied.     

Syntheses, crystal structures and magnetic properties of a new nitronyl nitroxide NIT2-bithph and its manganese(II) compound [Mn(hfac)2(IMHBithph)]2·(NIT2-bithph)(C6H14)

A new nitronyl nitroxide NIT2-bithph (1) and its manganese(II) compound [Mn(hfac)₂(IMHBithph)]₂·(NIT2-bithph)(C₆H₁₄) (2) (hfac = hexafluoroacetylacetonate; NIT2-bithph = 4,4,5,5-tetramethyl-2-(bithiophenal-2-yl)imidazoline-1-oxyl-3-oxide; IMHBithph = 1-hydroxy-2-bithiophenal-4,4,5,5-tetramethyl-4,5-dihydro- 1H-imidazole) have been synthesized and structurally characterized by X-ray diffraction methods. The units of compound 1 were connected as one-dimensional chain by the intermolecular hydrogen bonds which afford an intermolecular antiferromagnetic interaction between nitronyl nitroxide radicals within the chain (J = −1.89 cm⁻¹). Compound 2 resulting from the reaction of Mn(hfac)₂·2H₂O and NIT2-bithph is dinuclear and includes the reduced amidino-oxide form of NIT2-bithph, it is made up of three parts: a [Mn(hfac)₂(IMHBithph)]₂ dimer unit, an uncoordinated NIT2-bithph radical and a noncoordinated solvent molecule of hexane, the molecule of radical is hydrogen bonded to its reduced form. Two reduced IMHBithph ligands bridge the two manganese(II) ions through their amidino-oxide oxygen atoms resulting in a small intramolecular antiferromagnetic interaction between the manganese ions (J = −1.55 cm⁻¹).     

Conformational stability of 1-pentyne from temperature dependent FT-IR spectra of liquid rare gas solutions and ab initio calculations

Variable temperature studies of the infrared spectra (3500–400 cm⁻¹) of 1-pentyne, CH₃CH₂CH₂CCH, dissolved in liquid xenon (−55 to −100°C) and liquid krypton (−105 to −150°C) have been recorded. These data indicate that the anti (methyl group trans to the acetylenic group) and gauche conformers have relative concentrations that vary with the temperature, i.e. enthalpy nonzero. Utilizing seven sets of conformer pairs for the xenon solution and ten sets of conformer pairs for the krypton solution, the enthalpy difference has been determined to be 50±6 cm⁻¹ (0.60±0.07 kJ/mol) and 45±4 cm⁻¹ (0.54±0.05 kJ/mol), respectively, with the anti conformer the more stable form. Because of two equivalent gauche forms, this conformer is estimated to be in higher abundance at 61±1% in the xenon solution and 62±1% in the krypton solution. Optimized geometries and conformational stabilities have been obtained from ab initio calculations with basis sets 6-31G(d), 6-311+G(d,p), 6-311+G(2d,2p) and 6-311+G(2df,2pd) with full electron correlation by the perturbation method to second order (MP2). All of the calculations predict the gauche rotamer to be the more stable form with a high value of 181 cm⁻¹ from the MP2/6-311+G(d,p) calculations and a low value of 107 cm⁻¹ from the MP2/6-311+G(2d,2p) calculation. The r_o adjusted structural parameters have been obtained from a combination of the microwave rotational constants and ab initio predicted parameters. The values are compared to the recently reported values from an electron diffraction study where the value for the CC bond distance appears to be too long. The results are discussed and the conformational stability is compared to those obtained for some similar molecules.     

Raman and infrared spectra, conformational stability, ab initio calculations and vibrational assignments for 2-chloroethyl silane

The infrared (3500–30 cm⁻¹) spectra of gaseous and solid and the Raman (3500–10 cm⁻¹) spectra of liquid with quantitative depolarization ratios and solid 2-chloroethyl silane, ClCH₂CH₂SiH₃, have been recorded. Similar data have been recorded for the Si–d₃ isotopomer. These data indicate that two conformers, trans and gauche, are present in the fluid states but only one conformer, trans, is present in the solid. The mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (−55 to −100°C) has been recorded. The enthalpy difference between the conformers has been determined to be 181±12 cm⁻¹ (2.17±0.14 kJ/mol) with the trans rotamer the more stable form. From the isolated Si–H frequencies from the Si–d₂ isotopomer the r_o Si–H distances of 1.484 and 1.483 Å for the trans and 1.481 for the gauche conformers have been obtained. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G** from which structural parameters and conformational stabilities have been determined. With all the basis sets the trans form is predicted to be the more stable conformer which is consistent with the experimental results. These results are compared to the corresponding quantities for the carbon analogue.     

Semi-quantitative trace analysis of nuclear fast red by surface enhanced resonance Raman scattering

The dye nuclear fast red has been detected and determined semi-quantitatively by means of surface enhanced resonance Raman scattering (SERRS) and surface enhanced Raman scattering (SERS), using laser exciting wavelengths of 514.5 and 632.8 nm, respectively, by employing a citrate-reduced silver colloid. A good linear correlation is observed for the dependence of the intensities of the SERRS bands at 989 cm⁻¹ (R=0.9897) and 1278 cm⁻¹ (R=0.9872) on dye concentration over the range 10⁻⁹ to 10⁻⁷ M, when using an exciting wavelength of 514.5 nm. At dye concentrations above 10⁻⁷ M, the concentration dependence of the SERRS signals is non-linear. This is almost certainly due to the coverage of the colloidal silver particles being in excess of a full monolayer of the dye. A linear correlation is also observed for the dependence of the intensities of the SERS bands at 989 cm⁻¹ (R=0.9739) and 1278 cm⁻¹ (R=0.9838) on the dye concentration over the range 10⁻⁸ to 10⁻⁶ M when using an exciting wavelength of 632.8 nm. Strong fluorescence prevented collection of resonance Raman scattering (RRS) spectra from powdered samples or aqueous solutions of the dye using an exciting wavelength of 514.5 nm, but weak bands were observed in the spectra obtained from both powdered and aqueous samples of the dye using an exciting wavelength of 632.8 nm. A study of the pH dependence of SERRS/SERS and UV–VIS absorption spectra revealed the presence of different ionisation states of the dye. The limits of detection for nuclear fast red by SERRS (514.5 nm), SERS (632.8 nm) and visible spectroscopy (535 nm) are 9, 89 and 1000 ng ml⁻¹, respectively.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Three new polynuclear tetracarboxylato-bridged copper(II) complexes: Syntheses, X-ray structure and magnetic properties

The synthesis, crystal structure and magnetic measurements of three new polynuclear tetracarboxylato-bridged copper(II) complexes, i.e. {[Cu₄(phen)₂(μ-O₂CC₂H₅)₈] · (H₂O)}_n (1), [Cu₂(μ-O₂CC₆H₄OH)₄(C₇H₇NO)₂] · 6H₂O (2) and [Cu₂(μ-O₂CCH₃)₄(C₇H₇NO)₂] (3) (phen = 1,10-phenanthroline, O₂CC₆H₄OH = 3-hydroxy benzoate, C₇H₇NO = 4-acetylpyridine) are reported. All compounds consist of dinuclear units, in which two Cu(II) ions are bridged by four syn,syn-η¹:η¹:μ carboxylates, showing a paddle-wheel cage type with a square-pyramidal geometry, arranged in different ways. The structure of compound 1 consists of an one-dimensional structure generated by an alternating classical dinuclear paddle-wheel unit and an unusual dinuclear Cu₂(μ-OCOC₂H₅)₂(μ-O₂CC₂H₅)₂(phen)₂unit, which are connected to each other via a syn,anti-triatomic propionato bridge in an axial-equatorial configuration. The adjacent chains are connected to generate a 2D structure through the face-to-face π–π interaction between phen rings. Structures of compounds 2 and 3 both consist of a symmetric dinuclear Cu(II) carboxylate paddle-wheel core and pyridyl nitrogen atoms of 4-acetylpyridine ligand at the apical position, and just differ in the substituents of the equatorial ligands.

The magnetic properties have been measured and correlated with the molecular structures. It is found that in the two classical paddle-wheel compounds the Cu(II) ions are strongly antiferromagnetically coupled with J = −278.5 and −287.0 cm⁻¹ for complexes 2 and 3, respectively. In compound 1 the magnetic susceptibility could be fitted with two different, independent Cu(II) units, one strongly coupled and one weakly coupled; the paddle-wheel dinuclear unit has the strongest antiferromagetic coupling with a value for J of −299.5 cm⁻¹, whereas the Cu(II) ions in the propionato-bridged dinuclear unit of 1 display a very weak antiferromagnetic coupling with a value for J = −0.75 cm⁻¹, due to the orthogonality of the magnetic orbitals. Also the exchange within the chain is therefore very weak. The magneto-structural correlations for complexes 1, 2, and 3 are discussed on the basis of the structural parameters and magnetic data for the complexes.     

Indirect determination of ascorbic acid by solid-phase spectrophotometry

Solid-phase spectrophotometry (SPS) technique, in the visible region, was used for the spectrophotometric determination of ascorbic acid based on the reducing effect on iron(III) ion, followed by formation of the iron(II)-ferrozine chelate. The chelate is easily sorbed on a dextran-type anion-exchange gel and the absorbance of the resin at 567 and 800 nm, packed in a 1 mm cell, is measured directly. The apparent molar absorptivity using 100 ml of sample was 2.1×10⁷ l mol⁻¹ cm⁻¹ and it allowed the determination of ascorbic acid in the range 5–90 ng ml⁻¹; the detection limit was 0.91 ng ml⁻¹ and the RSD 0.91% for a concentration of 50 ng ml⁻¹ of ascorbic acid (n=10). The proposed method permits a highly sensitive and selective determination of ascorbic acid without any preconcentration and it has been satisfactorily applied for its determination in fruit juices, pharmaceuticals, urine and conservative liquids.     

Characterization and decomposition mechanism of an unusual nickel, thiocyanate and 4-methylpyridine polymeric complex

The synthesis, characterization, and thermal decomposition of the [Ni(SCN)₂(H⁺SCN)₂(4-mepy)₂] compound with an octahedral structure in polymeric chain were reported, in which SCN groups form bridges among Ni(II) ions. The compound decomposes in water resulting in a pH<4 solution. The FT-IR spectrum presented doublet bands at 2117; 2128 cm⁻¹, 788; 773 cm⁻¹ assigned to ν(C---N) and ν(C---S) stretching modes, respectively, and δ(SCN) deformation modes at 468; 476 cm⁻¹. The Raman spectrum of the compound presented the ν(C---N) stretching as a strong doublet at 2122; 2128 cm⁻¹, ν(C---S) at 783; 770 cm⁻¹, and δ(SCN) at 468; 477 cm⁻¹. No significant changes were observed in the 4-mepy ligand bands compared with the vibrational frequencies of the pure compound or the compound in aqueous solution 0.2 mol l⁻¹. The crystal UV–vis reflectance spectrum presented two bands centered in 626 and 424 nm tentatively assigned to the d→d type transitions, ³A_2g→³T_1g and ³A_2g→³T_1g, for a symmetry close to O_h. The TG curve showed a mass loss between 120 and 200 °C assigned to the loss of the two 4-mepy molecules; from 200 to 265 °C, the loss of the two H⁺SCN groups; and from 265 to 450 °C, the loss of the two SCN groups that formed the bridges among the nickel atoms. Based on these mass loss data, a mechanism of thermal decomposition for the compound was proposed.     

Spectroscopic and structural analysis of Ca substituted La orthoferrite

Samples of orthoferrites La_1−xCa_xFeO₃ (0.15≤x≤0.45) were synthesized by double sintering ceramic technique. X-ray diffraction and infrared spectroscopy experiments were carried out and discussed for the investigated samples. The data showed the formation of single-phase orthorhombic structure of space group Pbnm. The FTIR spectra were performed in the region (1200–200 cm⁻¹). Four main absorption bands were present with some side bands and shoulders in the range (1200–400 cm⁻¹). Another four bands were appeared in the range (400–200 cm⁻¹). The positions, intensities and values of the absorptions bands vary depending on the Ca content in the samples. The first absorption band appeared at about 920 cm⁻¹ was assigned to the La–O stretching vibration.