吸附法处理水体中溶解性有机物的研究进展

综述了溶解性有机物(DOM)的性质、危害以及各种吸附剂在DOM去除中的研究现状.总结和介绍了吸附法处理DOM的主要机理和作用孔径,并对树脂吸附法处理DOM的研究提出了一些建议和展望.     

Physical adsorption of gases: the case for absolute adsorption as the basis for thermodynamic analysis

We discuss the thermodynamics of physical adsorption of gases in porous solids. The measurement of the amount of gas adsorbed in a solid requires specialized volumetric and gravimetric techniques based upon the concept of the surface excess. Excess adsorption isotherms provide thermodynamic information about the gas-solid system but are difficult to interpret at high pressure because of peculiarities such as intersecting isotherms. Quantities such as pore density and heats of adsorption are undefined for excess isotherms at high pressure. These difficulties vanish when excess isotherms are converted to absolute adsorption. Using the proper definitions, the special features of adsorption can be incorporated into a rigorous framework of solution thermodynamics. Practical applications including mixed-gas equilibria, equations for adsorption isotherms, and methods for calculating thermodynamic properties are covered. The primary limitations of the absolute adsorption formalism arise from the need to estimate pore volumes and in the application to systems with larger mesopores or macropores at high bulk pressures and temperatures where the thermodynamic properties may be dominated by contributions from the bulk fluid. Under these circumstances a rigorous treatment of the thermodynamics requires consideration of the adsorption cell and its contents (bulk gas, porous solid and confined fluid).     

Isolation and preconcentration of volatile organic compounds from water

Methods for the isolation and/or concentration of volatile organic compounds from water samples for trace organic analysis by gas chromatography are reviewed. The following basic groups of methods are discussed: liquid-liquid extraction, adsorption on solid sorbents, extraction with gas (gas stripping and static and dynamic headspace techniques) and membrane processes. The theoretical bases of these methods are discussed. Experimental arrangements for the isolation and/or concentration of volatile compounds from water are presented and discussed with respect to their efficiency. The applicability of the described methods to the isolation and/or concentration of various organic compounds from waters of various origins is discussed.     

毛细管柱固定蛋白质方法的研究进展

在熔融石英毛细管中,固定化的蛋白质(酶)在手性拆分、蛋白质肽谱、药物筛选、样品预浓缩等方面具有重要应用.本文对用于毛细管中蛋白质固定的溶胶-凝胶法、物理吸附法、离子鳌合吸附法、基于脂质的蛋白固定和共价键合法进行了综述.     

Calculation of the isotherms of the total content of the components according to the isotherm of adsorption from solution

Conclusions The methods of determining the limiting value of the true adsorption from solutions according to the slope of the linear portion of the isotherm of excess adsorption, known from the literature, are incompatible with the conditions of thermodynamic equilibrium.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1232–1235, June, 1970.     

Physical adsorption of organic molecules on the surface of layered silicate clay platelets: a thermogravimetric study

Physical adsorption of various adsorbents on the surface of premodified montmorillonite platelets was performed to fully organophilize the inorganic platelets for the purpose of their easy nanoscale dispersion in the polymer matrices during compounding. Different extents of adsorption could be achieved owing to the nature and the functionality of the adsorbents. High molecular weight adsorbents not only enhanced the organic coverage of the platelets but also were observed to contribute toward the thermal stability improvement of the organic modification, thus further fitting the use of such clays for high temperature compounding. The amount of adsorption could also be quantified with respect to the initial amount of adsorbent used in the process. The importance of a clean surface free from any excess surface modification or adsorbent molecules was emphasized. The adsorption process is an effective means to generate such high potential montmorillonites and is much simpler in technique than the common methods of grafting of polymer chains from the clay surface.     

Grand canonical monte carlo simulation study of methane adsorption at an open graphite surface and in slit-like carbon pores at 273 K

Grand canonical Monte Carlo (GCMC) simulation was used for the systematic investigation of the supercritical methane adsorption at 273 K on an open graphite surface and in slit-like micropores of different sizes. For both considered adsorption systems the calculated excess adsorption isotherms exhibit a maximum. The effect of the pore size on the maximum surface excess and isosteric enthalpy of adsorption for methane storage at 273 K is discussed. The microscopic detailed picture of methane densification near the homogeneous graphite wall and in slit-like pores at 273 K is presented with selected local density profiles and snapshots. Finally, the reliable pore size distributions, obtained in the range of the microporosity, for two pitch-based microporous activated carbon fibers are calculated from the local excess adsorption isotherms obtained via the GCMC simulation. The current systematic study of supercritical methane adsorption both on an open graphite surface and in slit-like micropores performed by the GCMC summarizes recent investigations performed at slightly different temperatures and usually a lower pressure range by advanced methods based on the statistical thermodynamics.     

Development of equations for differential and integral enthalpy change of adsorption for simulation studies

We present equations to calculate the differential and integral enthalpy changes of adsorption for their use in Monte Carlo simulation. Adsorption of a system of N molecules, subject to an external potential energy, is viewed as one of transferring these molecules from a reference gas phase (state 1) to the adsorption system (state 2) at the same temperature and equilibrium pressure (same chemical potential). The excess amount adsorbed is the difference between N and the hypothetical amount of gas occupying the accessible volume of the system at the same density as the reference gas. The enthalpy change is a state function, which is defined as the difference between the enthalpies of state 2 and state 1, and the isosteric heat is defined as the negative of the derivative of this enthalpy change with respect to the excess amount of adsorption. It is suitable to determine how the system behaves for a differential increment in the excess phase adsorbed under subcritical conditions. For supercritical conditions, use of the integral enthalpy of adsorption per particle is recommended since the isosteric heat becomes infinite at the maximum excess concentration. With these unambiguous definitions we derive equations which are applicable for a general case of adsorption and demonstrate how they can be used in a Monte Carlo simulation. We apply the new equations to argon adsorption at various temperatures on a graphite surface to illustrate the need to use the correct equation to describe isosteric heat of adsorption.     

Characterization of adsorption processes in analytical liquid–solid chromatography

This review discusses nonlinear chromatographic methods of importance for proper characterization of the adsorption processes in analytical chromatographic systems, with focus on reversed-phase liquid chromatography. Linear methods such as the linear solvation energy relationship (LSER) method and the Snyder–Dolan hydrophobic-subtraction model will also be reviewed briefly. The nonlinear methods for adsorption isotherm determination and the tools for further treatment of the nonlinear adsorption data will be extensively treated in a way suitable for the general chromatographer. Applications of the various methods will be given and the outcome and conclusions will be discussed. Special emphasis will be placed on discussing the possibilities of combining linear and nonlinear methods in order to obtain a deeper and more complete investigation of the interactions in the actual phase system.     

Adsorption phenomena at high pressures and temperatures 5. Heats of excess and total adsorption of krypton on zeolite NaA

Thermodynamic principles for the calculation of differential heats of excess and absolute adsorption were considered. A set of isosteres of excess adsorption of krypton on zeolite NaA are presented, from which the coverage and temperature dependences of the heats of excess adsorption are calculated and analyzed. The reasons for infinitely high values of the excess heats at finite values of adsorption are discussed. The problems of recalculation of the excess adsorption to absolute adsorption are considered.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1946–1950, August, 1996.     

咪唑啉酰胺在电偶电极表面的吸附行为

采用原子力显微镜技术研究了有机阳离子缓蚀剂(咪唑啉酰胺)在电偶电极表面的吸附行为, 并探讨了其腐蚀抑制机理. 结果表明, 金属表面的过剩电荷较大地影响缓蚀剂分子的吸附行为. 在1%的NaCl溶液中, 碳钢电极表面带有过剩的负电荷；不锈钢电极表面带有过剩的正电荷；碳钢电极和不锈钢电极耦合后, 其表面分别带有过剩的正电荷和负电荷. 在耦合前阳离子缓蚀剂分子仅吸附在碳钢表面, 耦合后缓蚀剂分子在偶对的阴极(不锈钢)和阳极(碳钢)表面均有吸附, 但缓蚀剂分子在碳钢表面的吸附强度和覆盖度较之耦合前降低, 缓蚀剂的腐蚀抑制能力减弱.     

Interlamellar adsorption of organic pollutants in hydrophobic montmorillonite

The adsorption of nitrobenzene, 2-chlorophenol, and 4-chlorophenol from water on organophilized derivatives of n-hexadecylpyridinium-montmorillonite (HDP-montmorillonite) was studied. Adsorption excess isotherms were obtained by the immersion method and were analyzed to determine the adsorption capacity of organic pollutants on the hydrophobized surface. The basal spacings of the clay minerals were determined by X-ray diffraction. The results of X-ray diffraction measurements are in good agreement with excess isotherms: whenever a region of the isotherm indicates an increase for the adsorption of organic component, an increase in basal spacing (interlamellar swelling) is also observed. By combining these two independent methods, composition and structure of the interlamellar space between the silicate layers could be accurately calculated. The free enthalpy of adsorption, the adsorption capacity, and the separation factor for adsorption are calculated by analyzing the adsorption isotherm on the basis of the Gibbs equation and Everett-Schay method. The results are utilizable for planning environmental procedures and systems (water clarification and soil remediation). Received: 17 July 2000   Accepted: 5 October 2000     

Dye and its removal from aqueous solution by adsorption: A review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.     

Measurement of Gas Mixture Adsorption Equilibria of Natural Gas Compounds on Microporous Sorbents

Physisorption equilibria of multicomponent gases on microporous solids like zeolites or activated carbons are considered. In view of lack of reliable and simple methods to calculate mixture adsorption isotherms from pure component data, experiments are still indispensable. An overview of classical and new methods to measure multicomponent gas adsorption equilibria is given. Some of the basic concepts like the Gibbs excess mass and the absolute mass adsorbed underlying these methods are discussed. Experimental data and a class of new adsorption isotherms for inhomogeneous microporous adsorbents of fractal dimension will be given in another subsequent paper (ADSO 635-98) by the same group of authors.     

Ion hydration near air/water interfaces and the structure of liquid surfaces

Negative adsorption of ions, commonly observed at air-water interfaces, is examined in terms of models of restricted polarization of the solvent by ions at the interface and the structure of the liquid interface. The Born and other models of ionic hydration are applied to evaluate the self-energy of the ion arising in the region of solvent near its interface and in the vacuum or vapour beyond. The adsorption energy of an ion varies substantially with distance from the liquid interface so that a distribution of ions arises as a function of distance from the interface. Integration of this distribution gives an expression, and results, for the ionic surface excess. The diffuse-layer potential, which an unequal distribution of cations and anions give rise to, gives a contribution to the surface potential of the electrolyte solution at finite concentrations.Structural aspects of the liquid interface at which ions are negatively adsorbed are discussed in terms of Stefan's ratio and the superficial excess entropies of various liquid surfaces. These entropies are related to the cohesive energy densities of the bulk liquids. Ion solvent-structure co-sphere interactions with structured interfaces will lead to specificity of negative adsorption of ions.     

单层型氧化铁催化剂的制备及其前体的表征:Ⅰ.催化剂前体的制备

尝试用（ＮＨ４）３［Ｆｅ（Ｃ２Ｏ４）３］·ＸＨ２Ｏ的过量水溶液含浸法制备不同载体上单层型氧化铁催化剂．为了比较，也采用Ｆｅ（ＡｃＡｃ）３的甲苯溶液热吸附以及Ｆｅ（ＮＯ３）３溶液饱和浸渍两种方法制备样品．特别对合浸法，考察了含浸溶液的ｐＨ值、浓度及含漫时间对吸附过程的影响，确定了不同载体催化剂前体的适宜制备条件．     

Role of adsorption in liquid chromatography of macromolecules and potential of liquid chromatography in assessing adsorption of macromolecules onto solid surfaces

Many liquid chromatographic (LC) separations of macromolecules are influenced or directly based on adsorption of solutes on column packing. In the case of well known size exclusion chromatography (SEC), adsorption effects are usually unwanted and therefore suppressed. Still they appear in many SEC systems and may badly affect precision of results obtained. In other LC methods applicable to high polymers, adsorption is deliberately combined with exclusion. The aim is to discriminate complex polymer systems which exhibit more than one single distribution of their molecular characteristics. The main goals of such combinations include either a controlled increase or a full suppression of separation selectivity according to one molecular characteristics. Most important so far known exclusion-adsorption compensation methods allowing to suppress dependence of LC retention volumes on polymer molar mass are reviewed. The discussion is accomplished with a presentation of newly developed full adsorption - desorption (FAD) method which can be combined with various LC procedures. A very useful combination represents the on-line FAD/SEC procedure which enables also to study adsorption and desorption phenomena in the systems solid surface - solvent - macromolecules.     

含钒无机有机杂化材料的合成、结构与性质

含钒无机有机杂化材料的结构复杂多样,在吸附、氧化还原、电化学、催化、光学、磁学以及多孔、手性材料研究等方面应用前景广阔,引起人们广泛关注。本文综述了含钒无机有机杂化材料研究的最新进展,介绍了合成含钒无机有机杂化材料的主要方法,按照有机组分与无机骨架作用的方式分类总结了含钒无机有机杂化材料的结构,介绍了其在离子交换、电化学、磁学、光学、催化等方面的应用,并展望了该类材料的研究前景和意义。     

Adsorption equilibria of proline in hydrophilic interaction chromatography

The adsorption behavior of proline under hydrophilic interaction chromatography conditions was investigated from six aqueous solutions of acetonitrile. Proline adsorption isotherms were recorded at each mobile phase composition by frontal analysis and inverse method. The BET model was found to be the best choice to describe the nonlinear behavior of proline adsorption under hydrophilic interaction chromatography conditions. The adsorption isotherm parameters were derived from two independent parameter estimation methods. The parameters derived from regression analysis of the frontal analysis data and from overloaded elution bands were found to be in good agreement with the excess isotherm of water. The mobile phase composition at which the maximum excess adsorption of water was observed corresponded to the maximum saturation capacity measured for proline.