Ruthenium-catalyzed hydrovinylation of N-acetylenamines leading to amines with a quaternary carbon center

A catalytic hydrovinylation of N-acetylenamines with ethylene is reported. This new hydrovinylation reaction is catalyzed by a ruthenium hydride complex, RuHCl(CO)(PCy(3))(2), providing a series of N-acetylamines with a quaternary carbon center with up to 99% yield.     

Mechanism of alkene isomerization by bifunctional ruthenium catalyst: A theoretical study

The molecular mechanism of the isomerization of 1-pentene to form (E)-2-pentene catalyzed by the bifunctional ruthenium catalyst has been investigated using density functional theory calculations. The reaction is likely to proceed through the following steps: 1) the β-H elimination to generate the ruthenium hydride intermediate; 2) the reductive elimination of the hydride intermediate to generate the nitrogen-protonated allyl intermediate; 3) the transportation of the hydrogen by the dihedral rotation with Ru–P bond acting as axis; 4) the oxidative addition to afford another hydride complex; 5) the reductive elimination of the hydride intermediate to form the C₂-C₃ π-coordinated agostic intermediate; 6) the coordination of the nitrogen to the ruthenium center to give the final product. The rate-determining step is the oxidative addition step (the process of the hydrogen moves to ruthenium center from the nitrogen atom) with the free energy of 31.2 kcal/mol in the acetone solvent. And the N-heterocyclic ligand in the catalyst mainly functions in the two aspects: affords an important internal-basic center (nitrogen atom) and works as a transporter of hydrogen. Our results would be helpful for experimentalists to design more effective bifunctional catalysts for isomerization of a variety of heterofunctionalized alkene derivatives.     

Comparative preparations of homoleptic hydridic anions of iron and ruthenium using solution-based organometal hydrogenation techniques

A study of the preparations of the complex hydridic anions [MH(6)](4)(-) (M = Fe and Ru) reveals a number of distinctive features. Here a soluble homoleptic ruthenium hydride has been prepared for the first time. For example, both FeX(2) and [Ru(eta(4)-1,5-COD)X(2)], X = Cl and Br, react with PhMgBr solutions under hydrogen to produce the title compounds. The benzene liberated in these reactions is more readily hydrogenated in the case of a homogeneous room temperature ruthenium hydride preparation to both cyclohexane and cyclohexene. The (1)H NMR spectroscopic data show that the two complex anions have hydride absorptions in the low-frequency region, delta -20.3 and -14.7, respectively. Further, (1)H spin-lattice relaxation times (T(1)) for M-H are longer in the case of Ru vs Fe.     

RuH2(CO)(PPh3)3 catalyzed selective formation of 1,4-disubstituted triazoles from cycloaddition of alkynes and organic azides

The ruthenium hydride complex RuH(2)(CO)(PPh(3))(3) was found to be an effective catalyst for the cycloaddition reactions of terminal alkynes and azides. In the presence of RuH(2)(CO)(PPh(3))(3), various azides reacted with a range of terminal alkynes to produce 1,4-disubstituted 1,2,3-triazoles with 100% selectivity and moderate to excellent yields.     

Unexpected Direct Hydride Transfer Mechanism for the Hydrogenation of Ethyl Acetate to Ethanol Catalyzed by SNS Pincer Ruthenium Complexes

The hydrogenation of ethyl acetate to ethanol catalyzed by SNS pincer ruthenium complexes was computationally investigated by using DFT. Different from a previously proposed mechanism with fac‐[(SNS)Ru(PPh₃)(H)₂] ( 5′ ) as the catalyst, an unexpected direct hydride transfer mechanism with a mer‐SNS ruthenium complex as the catalyst, and two cascade catalytic cycles for hydrogenations of ethyl acetate to aldehyde and aldehyde to ethanol, is proposed base on our calculations. The new mechanism features ethanol‐assisted proton transfer for H₂ cleavage, direct hydride transfer from ruthenium to the carbonyl carbon, and C?OEt bond cleavage. Calculation results indicate that the rate‐determining step in the whole catalytic reaction is the transfer of a hydride from ruthenium to the carbonyl carbon of ethyl acetate, with a total free energy barrier of only 26.9 kcal mol^?1, which is consistent with experimental observations and significantly lower than the relative free energy of an intermediate in a previously postulated mechanism with 5′ as the catalyst.     

Decomposition of a key intermediate in ruthenium-catalyzed olefin metathesis reactions

Dinuclear ruthenium complex, with a bridging carbide and a hydride ligand, and methyltricyclohexylphosphonium chloride result from thermal decomposition of olefin metathesis catalyst, (IMesH2)(PCy3)(Cl)2Ru=CH2. Involvement of dissociated phosphine in the decomposition is proposed. The dinuclear complex has catalytic olefin isomerization activity, which can be responsible for competing isomerization processes in certain olefin metathesis reactions.     

Degradation of the ruthenium-based metathesis catalyst [RuCl2(CHPh)(H2IPr)(PCy3)] with primary alcohols

A new ruthenium hydride species, showing high catalytic isomerization and hydrogenation properties, was isolated via a ligand exchange reaction. The same species was also present in the mixture of degradation products of the monophosphinic complex RuCl(CO)(PCy)₃(IPr)CH(Ph), 3, after reaction with alcohols under basic conditions.     

1H bridging and terminal hydride T1 values. Comments on classical vs non-classical hydride identification using T1 criteria

Hydride ¹H T₁ values are reported for a selected series of ruthenium, iridium and platinum complexes. These T₁ values range from 6.9 to 0.05 s with the shortest value, 0.05 s, assigned to a complex containing both hydride and coordinated molecular hydrogen, i.e. “M(H₂)”. There are nuclear Overhauser enhancements arising both from protons on coordinated ligands and other hydride ligands. It is suggested that the molecular weight of the complex and the measurement conditions can be important factors for T₁.     

Kinetics of the cis,cis to trans,trans isomerization of 1,1,2,2,5,5,6,6-octamethyl-1,2,5,6-tetrasilacycloocta-3,7-diene

The kinetics of the ruthenium-promoted cis,cis to trans,trans isomerization of 1,1,2,2,5,5,6,6-octamethyl-1,2,5,6-tetrasilacycloocta-3,7-diene were investigated. Incubation of a ruthenium alkylidene complex, (Cy(3)P)RuCl(2)(==CHPh)Ru(p-cymene)Cl(2), in CD(2)Cl(2) for 5 days at 40 degrees C afforded a catalytically active ruthenium species that was shown to be responsible for promoting the isomerization. The isomerization was observed to proceed in two steps: (1) conversion of the starting cis,cis isomer to a proposed cis,trans intermediate and (2) subsequent conversion of the intermediate to the product trans,trans isomer. Kinetic studies demonstrated that the two steps are first-order with respect to the concentrations of the cis,cis isomer, the intermediate, and the ruthenium alkylidene complex. The data were further consistent with a mechanism involving bimolecular hydride addition-elimination during the two isomerization steps.     

Combined ruthenium(II) and lipase catalysis for efficient dynamic kinetic resolution of secondary alcohols. Insight into the racemization mechanism

Pentaphenylcyclopentadienyl ruthenium complexes (3) are excellent catalysts for the racemization of secondary alcohols at ambient temperature. The combination of this process with enzymatic resolution of the alcohols results in a highly efficient synthesis of enantiomerically pure acetates at room temperature with short reaction times for most substrates. This new reaction was applied to a wide range of functionalized alcohols including heteroaromatic alcohols, and for many of the latter, enantiopure acetates were efficiently prepared for the first time via dynamic kinetic resolution (DKR). Different substituted cyclopentadienyl ruthenium complexes were prepared and studied as catalysts for racemization of alcohols. Pentaaryl-substituted cyclopentadienyl complexes were found to be highly efficient catalysts for the racemization. Substitution of one of the aryl groups by an alkyl group considerably slows down the racemization process. A study of the racemization of (S)-1-phenylethanol catalyzed by ruthenium hydride eta(5)-Ph(5)CpRu(CO)(2)H (8) indicates that the racemization takes place within the coordination sphere of the ruthenium catalyst. This conclusion was supported by the lack of ketone exchange in the racemization of (S)-1-phenylethanol performed in the presence of p-tolyl methyl ketone (1 equiv), which gave <1% of 1-(p-tolyl)ethanol. The structures of ruthenium chloride and iodide complexes 3a and 3c and of ruthenium hydride complex 8 were confirmed by X-ray analysis.     

Spectroscopic determination of hydrogenation rates and intermediates during carbonyl hydrogenation catalyzed by Shvo's hydroxycyclopentadienyl diruthenium hydride agrees with kinetic modeling based on independently measured rates of elementary reactions

The catalytic hydrogenation of benzaldehyde and acetophenone with the Shvo hydrogenation catalysts were monitored by in situ IR spectroscopy in both toluene and THF. The disappearance of organic carbonyl compound and the concentrations of the ruthenium species present throughout the hydrogenation reaction were observed. The dependence of the hydrogenation rate on substrate, H2 pressure, total ruthenium concentration, and solvent were measured. In toluene, bridging diruthenium hydride 1 was the only observable ruthenium species until nearly all of the substrate was consumed. In THF, both 1 and some monoruthenium hydride 2 were observed during the course of the hydrogenation. A full kinetic model of the hydrogenation based on rate constants for individual steps in the catalysis was developed. This kinetic model simulates the rate of carbonyl compound hydrogenation and of the amounts of ruthenium species 1 and 2 present during hydrogenations.     

NMR studies of Ru(3)(CO)(10)(PMe(2)Ph)(2) and Ru(3)(CO)(10)(PPh(3))(2) and their H(2) addition products: detection of new isomers with complex dynamic behavior

The clusters Ru(3)(CO)(10)L(2), where L = PMe(2)Ph or PPh(3), are shown by NMR spectroscopy to exist in solution in at least three isomeric forms, one with both phosphines in the equatorial plane on the same ruthenium center and the others with phosphines in the equatorial plane on different ruthenium centers. Isomer interconversion for Ru(3)(CO)(10)(PMe(2)Ph)(2) is highly solvent dependent, with DeltaH decreasing and DeltaS becoming more negative as the polarity of the solvent increases. The stabilities of the isomers and their rates of interconversion depend on the phosphine ligand. A mechanism that accounts for isomer interchange involving Ru-Ru bond heterolysis is suggested. The products of the reaction of Ru(3)(CO)(10)L(2) with hydrogen have been monitored by NMR spectroscopy via normal and para hydrogen-enhanced methods. Two hydrogen addition products are observed with each containing one bridging and one terminal hydride ligand. EXSY spectroscopy reveals that both intra- and interisomer hydride exchange occurs on the NMR time scale. On the basis of the evidence available, mechanisms for hydride interchange involving Ru-Ru bond heterolysis and CO loss are proposed.     

Conversion of oxido-bridged dinuclear ruthenium complex to dicationic dinitrosyl ruthenium complex using proton and nitric oxide: completion of NO reduction cycle

The hydroxido-bridged dinuclear ruthenium complex 4, which is supported by Tp ligands, has been prepared from protonation of the oxido-bridged dinuclear ruthenium complex 3. Additional protonation of 4, affording the aqua-bridged dinuclear ruthenium complex 5 in situ, and subsequent treatment with NO gave rise to the dicationic dinitrosyl complex 2. These indicate completion of the NO reduction cycle on the dinuclear ruthenium complex.     

Decomposition of ruthenium olefin metathesis catalysts

The decomposition of a series of ruthenium metathesis catalysts has been examined using methylidene species as model complexes. All of the phosphine-containing methylidene complexes decomposed to generate methylphosphonium salts, and their decomposition routes followed first-order kinetics. The formation of these salts in high conversion, coupled with the observed kinetic behavior for this reaction, suggests that the major decomposition pathway involves nucleophilic attack of a dissociated phosphine on the methylidene carbon. This mechanism also is consistent with decomposition observed in the presence of ethylene as a model olefin substrate. The decomposition of phosphine-free catalyst (H2IMes)(Cl)2Ru=CH(2-C6H4-O-i-Pr) (H2IMes = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) with ethylene was found to generate unidentified ruthenium hydride species. The novel ruthenium complex (H2IMes)(pyridine)3(Cl)2Ru, which was generated during the synthetic attempts to prepare the highly unstable pyridine-based methylidene complex (H2IMes)(pyridine)2(Cl)2Ru=CH2, is also reported.     

C-H activation reactions of ruthenium N-heterocyclic carbene complexes: application in a catalytic tandem reaction involving C-C bond formation from alcohols

A series of ruthenium hydride N-alkyl heterocyclic carbene complexes has been investigated as catalysts for a tandem oxidation/Wittig/reduction reaction to give C-C bonds from alcohols. The C-H-activated carbene complex Ru(IiPr(2)Me(2))'(PPh(3))(2)(CO)H (9) proves to be the most active precursor catalyzing the reaction of PhCH(2)OH and Ph(3)P=CHCN in 3 h at 70 degrees C. These results provide (a) a rare case in which N-alkyl carbenes afford higher catalytic activity than their N-aryl counterparts and (b) a novel example of the importance of NHC C-H activation in a catalytic cycle.     

Utilization of CS2 as a source of C1 chemistry for the generation of methyldithioformate

Insertion of CS(2) into the Ru-H bond of cis-[(dppe)(2)Ru(H)(2)] takes place to afford the hydride dithioformate complex trans-[(dppe)(2)Ru(H)(SC(S)H)]. The hydride dithioformate complex reacts under very mild conditions with MeX (X = OTf, I) to give the hydride methyldithioformate derivative trans-[(dppe)(2)Ru(H)(SC(SMe)H)][X]. Three different pathways have been found to cleave off the ester moiety from the metal complex. A method to recover the ruthenium starting material upon elimination of the methyldithioformate is presented. This is a novel case of C(1) chemistry using carbon disulfide.     

Scope and mechanistic study of the ruthenium-catalyzed ortho-C-H bond activation and cyclization reactions of arylamines with terminal alkynes

The cationic ruthenium hydride complex [(PCy(3))(2)(CO)(CH(3)CN)(2)RuH](+)BF(4)(-) was found to be a highly effective catalyst for the C-H bond activation reaction of arylamines and terminal alkynes. The regioselective catalytic synthesis of substituted quinoline and quinoxaline derivatives was achieved from the ortho-C-H bond activation reaction of arylamines and terminal alkynes by using the catalyst Ru(3)(CO)(12)/HBF(4).OEt(2). The normal isotope effect (k(CH)/k(CD) = 2.5) was observed for the reaction of C(6)H(5)NH(2) and C(6)D(5)NH(2) with propyne. A highly negative Hammett value (rho = -4.4) was obtained from the correlation of the relative rates from a series of meta-substituted anilines, m-XC(6)H(4)NH(2), with sigma(p) in the presence of Ru(3)(CO)(12)/HBF(4).OEt(2) (3 mol % Ru, 1:3 molar ratio). The deuterium labeling studies from the reactions of both indoline and acyclic arylamines with DCCPh showed that the alkyne C-H bond activation step is reversible. The crossover experiment from the reaction of 1-(2-amino-1-phenyl)pyrrole with DCCPh and HCCC(6)H(4)-p-OMe led to preferential deuterium incorporation to the phenyl-substituted quinoline product. A mechanism involving rate-determining ortho-C-H bond activation and intramolecular C-N bond formation steps via an unsaturated cationic ruthenium acetylide complex has been proposed.     

Dihydrogen-bond-promoted catalysis: catalytic hydration of nitriles with the indenylruthenium hydride complex (eta(5)-C(9)H(7))Ru(dppm)H (dppm = bis(diphenylphosphino)methane)

The indenylruthenium hydride complex (eta(5)-C(9)H(7))Ru(dppm)H was found to be active in catalyzing the hydration of nitriles to amides. The chloro analogue (eta(5)-C(9)H(7))Ru(dppm)Cl was, however, found to be inactive. Density functional theory calculations at the B3LYP level provide explanations for the effectiveness of the hydride complex and the ineffectiveness of the chloro complex in the catalysis. It is learned that the presence of a Ru-H.H-OH dihydrogen-bonding interaction in the transition state lowers the reaction barrier in the case of (eta(5)-C(9)H(7))Ru(dppm)H, but in the chloro system, the corresponding transition state does not contain this type of interaction and the reaction barrier is much higher. A similar dihydrogen-bond-promoting effect is believed to be responsible for the catalytic activity of the hydrotris(pyrazolyl)borato (Tp) ruthenium complex TpRu(PPh(3))(CH(3)CN)H in CH(3)CN hydration. The chloro analogue TpRu(PPh(3))(CH(3)CN)Cl shows no catalytic activity.     

Catalytic Radical Reduction in Aqueous Solution by a Ruthenium Hydride Intermediate

Some manganese complexes can catalyze both antioxidant and pro‐oxidant reactions, whereby the disparate reactivity modes are determined by the catalyst environment and afford distinct therapeutic effects. We recently reported the reduction of radicals in buffered aqueous solution catalyzed by a ruthenium complex with biologically relevant non‐tertiary alcohols as terminal reductants. Mechanistic evidence is presented, indicating that this catalytic radical reduction is achieved by a Ru‐hydride intermediate formed by β‐hydride elimination from a Ru‐alkoxide species. A similar mechanism and Ru‐hydride intermediate was previously reported to kill cancer cells with catalytic pro‐oxidant effects. Therefore, our demonstration of catalytic antioxidant effects by the same type of intermediate reveals new potential therapeutic strategies and applications for catalytic systems that form Ru‐hydride intermediates.     

Synthesis of tridentate 2,6-bis(imino)pyridyl aminechlorohydro ruthenium(II) complexes: The convenient use of amine hydrochlorides to generate metal-hydride

The reaction of low-valent ruthenium complexes with 2,6-bis(imino)pyridine ligand, [η²-N₃]Ru(η⁶-Ar) (1) or {[N₃]Ru}₂(μ-N₂) (2) with amine hydrochlorides generates six-coordinate chlorohydro ruthenium (II) complexes with amine ligands, [N₃]Ru(H)(Cl)(amine) (4). Either complex 1 or 2 activates amine hydrochlorides 3, and the amines coordinate to the ruthenium center to give complex 4. This is a convenient and useful synthetic approach to form ruthenium complexes with amine and hydride ligands using amine hydrochloride.