Reduction of tris(benzene-1,2-dithiolate)molybdenum(VI) by water. A functional mo-hydroxylase analogue system

Mo(VI)(S(2)C(6)H(4))(3) reacts cleanly and completely with H(2)O in THF to afford [H(3)O](+)[Mo(V)(S(2)C(6)H(4))(3)](-). Kinetic data were fit by the rate equation -d[Mo(VI)(S(2)C(6)H(4))(3)]/dt = k[Mo(VI)(S(2)C(6)H(4))(3)]/[H(3)O(+)], which is consistent with a coupled electron-proton transfer mechanism involving a coordinated H(2)O molecule. The Mo(VI)(S(2)C(6)H(4))(3) reduction is accelerated by the presence of PPh(3) and affords OPPh(3). (18)O isotope tracing shows that H(2)O is the source of oxygen transferred to PPh(3).     

The reduction of tris-dithiolene complexes of molybdenum(VI) and tungsten(VI) by hydroxide ion: kinetics and mechanism

The kinetic study of the spontaneous reduction of some neutral tris-dithiolene complexes [ML3] of molybdenum(VI) and tungsten(VI), (L = S2C6H4(2-), S2C6H3CH3(2-) and S2C2(CH3)2(2-); M = Mo or W) by tetrabutylammonium hydroxide in tetrahydrofuran-water solutions demonstrates that OH- is an effective reductant. Their reduction is fast, clean and quantitative. Depending upon both the molar ratio in which the reagents are mixed and the amount of water present, one- or two-electron reductions of these tris-dithiolene complexes were observed. If Bu4NOH is present in low concentration or/and at high concentrations of water, the total transformation of the neutral M(VI) complex into the monoanionic M(V) complex is the only observed process. Stopped-flow kinetic data for this reaction are consistent with the rate law: -d[ML3]/dt = d[ML3-]/dt = k[ML3][Bu4NOH]. The proposed mechanism involves nucleophilic attack of OH- to form a mono-anionic seven-coordinate intermediate [ML3OH]-, which interacts with another molecule of [ML3] to generate the monoanionic complex [ML3]- transfering the oxygen from coordinated OH- to water. Hydrogen peroxide was identified as the reaction product. The molybdenum complexes are more difficult to reduce than their corresponding tungsten complexes, and the values of k obtained for the molybdenum and tungsten series of complexes increase as the ene-1,2-dithiolate ligand becomes more electron-withdrawing (S2C6H4(2-) > S2C6H3CH3(2-) > S2C2(CH3)2(2-)). This investigation constitutes the only well-established interaction between hydroxide ion and a tris(dithiolene) complex, and supports a highly covalent bonding interaction between the metal and the hydroxide ion that modulates electron transfer reactions within these complexes.     

Bis(dithiolene)molybdenum analogues relevant to the DMSO reductase enzyme family: synthesis, structures, and oxygen atom transfer reactions and kinetics.

A series of dithiolene complexes of the general type [Mo(IV)(QR')(S(2)C(2)Me(2))(2)](1)(-) has been prepared and structurally characterized as possible structural and reactivity analogues of reduced sites of the enzymes DMSOR and TMAOR (QR' = PhO(-), 2-AdO(-), Pr(i)()O(-)), dissimilatory nitrate reductase (QR' = 2-AdS(-)), and formate dehydrogenase (QR' = 2-AdSe(-)). The complexes are square pyramidal with the molybdenum atom positioned 0.74-0.80 A above the S(4) mean plane toward axial ligand QR'. In part on the basis of a recent clarification of the active site of oxidized Rhodobacter sphaeroides DMSOR (Li, H.-K.; Temple, C.; Rajagopalan, K. V.; Schindelin, H. J. Am. Chem. Soc. 2000, 122, 7673), we have adopted the minimal reaction paradigm Mo(IV) + XO right arrow over left arrow Mo(VI)O + X involving desoxo Mo(IV), monooxo Mo(VI), and substrate/product XO/X for direct oxygen atom transfer of DMSOR and TMAOR enzymes. The [Mo(OR')(S(2)C(2)Me(2))(2)](1)(-) species carry dithiolene and anionic oxygen ligands intended to simulate cofactor ligand and serinate binding in DMSOR and TMAOR catalytic sites. In systems with N-oxide and S-oxide substrates, the observed overall reaction sequence is [Mo(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-) + XO --> [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-) --> [Mo(V)O(S(2)C(2)Me(2))(2)](1)(-). Direct oxo transfer in the first step has been proven by isotope labeling. The reactivity of [Mo(OPh)(S(2)C(2)Me(2))(2)](1)(-) (1) has been the most extensively studied. In second-order reactions, 1 reduces DMSO and (CH(2))(4)SO (k(2) approximately 10(-)(6), 10(-)(4) M(-)(1) s(-)(1); DeltaS(double dagger) = -36, -39 eu) and Me(3)NO (k(2) = 200 M(-)(1) s(-)(1); DeltaS(double dagger) = -21 eu) in acetonitrile at 298 K. Activation entropies indicate an associative transition state, which from relative rates and substrate properties is inferred to be concerted with X-O bond weakening and Mo-O bond making. The Mo(VI)O product in the first step, such as [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), is an intermediate in the overall reaction sequence, inasmuch as it is too unstable to isolate and decays by an internal redox process to a Mo(V)O product, liberating an equimolar quantity of phenol. This research affords the first analogue reaction systems of biological N-oxide and S-oxide substrates that are based on desoxo Mo(IV) complexes with biologically relevant coordination. Oxo-transfer reactions in analogue systems are substantially slower than enzyme systems based on a k(cat)/K(M) criterion. An interpretation of this behavior requires more information on the rate-limiting step(s) in enzyme catalytic cycles. (2-Ad = 2-adamantyl, DMSOR = dimethyl sulfoxide reductase, TMAOR = trimethylamine N-oxide reductase)     

An analogue system displaying all the important processes of the catalytic cycles involving monooxomolybdenum(VI) and desoxomolybdenum(IV) centers

The mononuclear monooxomolybdenum(VI) complex hydrotris(3,5-dimethyl-1-pyrazolyl)borato(bis-4-ethoxyphenolato)oxomoylybdenum(VI) cation, [LMoVIO(p-OC6H4-OC2H5)2]+, where L- = hydrotris(3,5-dimethyl-1-pyrazolyl)borate, has been synthesized by chemical and electrochemical oxidation from the corresponding neutral oxomolybdenum(V) species, LMoVO(p-OC6H4-OC2H5)2. The molybdenum(VI) species has been characterized by NMR, IR, and resonance Raman spectroscopies, mass spectrometry, and electronic spectroscopy. Acetonitrile solutions of cationic [LMoVIO(p-OC6H4-OC2H5)2]+ react with tertiary phosphines (PR3) to generate phosphineoxide-bound adducts, [LMoIV(OPR3)(p-OC6H4-OC2H5)2]+, which subsequently generate the cationic desoxo species, [LMoIV(p-OC6H4-OC2H5)2]+ and OPR3. In the presence of water and an oxidizing agent the desoxo species generates the monooxomolybdenum(V), LMoVO(p-OC6H4-OC2H5)2, and completes the catalytic cycle. The oxygen atom transfer reaction has been probed by isotope-labeling experiments, vibrational spectroscopies, and mass spectrometry. This study describes an analogue complex that can exhibit all important processes of the catalytic cycle involving monooxomolybdenum(VI) and desoxomolybdenum(IV) centers.     

The (Calix[4]arene)chloromolybdate(IV) anion [MoCl(Calix)](-): a convenient entry into molybdenum Calix[4]arene chemistry

The complex (HNEt(3))[MoCl(NCMe)(Calix)] (1), prepared from the reaction of [MoCl(4)(NCMe)(2)] with p-tert-butylcalix[4]arene, H(4)Calix, in the presence of triethylamine, has been used as a source of the d(2)-[Mo(NCMe)(Calix)] fragment. Complex 1 is readily oxidized with PhICl(2) to afford the molybdenum(VI) dichloro complex [MoCl(2)(Calix)] (2). Both complexes are a convenient entry point into molybdenum(VI) and molybdenum(IV) calixarene chemistry. The reaction of 1 with trimethylphosphine and pyridine in the presence of catalytic amounts [Ag(OTf)] led to the formation of neutral d(2) complexes [Mo(PMe(3))(NCMe)(Calix)] (3) and [Mo(NC(5)H(5))(NCMe)(Calix)] (4). The role of the silver salt in the reaction mixture is presumably the oxidation of the chloromolybdate anion of 1 to give a reactive molybdenum(V) species. The same reactions can also be initiated with ferrocenium cations such as [Cp(2)Fe](BF(4)). Without the presence of coordinating ligands, the dimeric complex [[Mo(NCMe)(Calix)](2)] (5) was isolated. The reaction of 1 with Ph(2)CN(2) led to the formation of a metallahydrazone complex [Mo(N(2)CPh(2))(NCMe)(Calix)] (6), in which the diphenyldiazomethane has been formally reduced by two electrons. Molybdenum(VI) complexes were also obtained from reaction of 1 with azobenzene and sodium azide in the presence of catalytic amounts of silver salt. The reaction with azobenzene led under cleavage of the nitrogen nitrogen bond to an imido complex [Mo(NPh)(NCMe)(Calix)] (7), whereas the reaction with sodium azide afforded the mononuclear molybdenum(VI) nitrido complex (HNEt(3))[MoN(Calix)] (8).     

Structural, electrochemical and oxygen atom transfer properties of a molybdenum selenoether complex [Mo2O4(OC3H6SeC3H6O)2] and its thioether analogue [Mo2O4(OC3H6SC3H6O)2

The first crystallographically characterized molybdenum(vi) selenoether complex [Mo(2)O(4)(OC(3)H(6)SeC(3)H(6)O)(2)] and its thioether analogue [Mo(2)O(4)(OC(3)H(6)SC(3)H(6)O)(2)] were synthesised. Their structural, electrochemical and oxygen atom transfer properties are compared. This is relevant for the molybdenum cofactors of the DMSO reductase family where the coordination of the active site metal occurs through O (serine/aspartate), S (cysteine) or Se (selenocysteine). Both structures are almost identical except for those parameters that are directly derived from the different sizes of the varied ligand atoms (Se and S). No trans influence was observed. The metal centered redox process (Mo(V)<-->Mo(VI)) is at slightly lower voltage for the sulfur than for the selenium complex. The selenium compound catalyses the oxygen atom transfer from DMSO to PPh(3) by a different mechanism and at a higher rate than the sulfur compound, which is an indication that cysteine and selenocysteine might be used for a purpose in the different molybdenum and tungsten cofactors.     

Synthesis and properties of mononuclear and binuclear molybdenum complexes derived from bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone

The monomer molybdenum(VI) complex [MoO(2)(napoxlhH(2))].2H(2)O (1) has been synthesized from the reaction of MoO(2)(acac)(2) with bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone (napoxlhH(4)) in 1:1 molar ratio in ethanol under reflux. This complex on reaction with pyridine/3-picoline/4-picoline yielded the dimer molybdenum(VI) complexes [Mo(2)O(4)(napoxlhH(2))(2)(A)(2)].2H(2)O (A=py (2), 3-pic (3), 4-pic (4)), whereas reaction with isonicotinoylhydrazine (inhH(3)) and salicyloylhydrazine (sylshH(3)) lead to the reduction of the metal centre yielding monomeric molybdenum(V) complexes [Mo(napoxlhH(2))(hzid)].2H(2)O (where hzidH(3)=inhH(3) (5) and sylshH(3) (6)). The complexes have been characterized by elemental analyses, molecular weight determinations, molar conductance data, magnetic moment data, electronic, IR, ESR and (1)H NMR spectroscopic studies. The complexes (5) and (6) are paramagnetic to the extent of one unpaired electron. The electronic spectra of the complexes are dominated by strong charge transfer bands. In all of the complexes, the principal dihydrazone ligand has been suggested to coordinate to the metal centres in the anti-cis-configuration. The complexes (1), (5) and (6) are suggested to have six-coordinate octahedral stereochemistry around molybdenum(VI) and molybdenum(V) metal centres, respectively, while the complexes (2)-(4) are suggested to have eight coordinate dodecahedral stereochemistry around molybdenum(VI) metal centre.     

Polyoxomolybdenum(V/VI)-sulfite compounds: synthesis, structural, and physical studies

Reaction of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) in the mixed-solvent system H(2)O/CH(3)CN (pH = 5) resulted in the formation of the tetranuclear cluster (NH(4))(4)[Mo(4)(VI)SO(16)] x H(2)O (1), while the same reaction in acidic aqueous solution (pH = 5) yielded (NH(4))(4)[Mo(5)(VI)S(2)O(21)] x 3H(2)O (2). Compound {(H(2)bipy)(2)[Mo(5)(VI)S(2)O(21)] x H(2)O}(x) (3) was obtained from the reaction of aqueous acidic solution of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) (pH = 2.5) and 4,4'-bipyridine (4,4'-bipy). The mixed metal/sulfite species (NH(4))(7)[Co(III)(Mo(2)(V)O(4))(NH(3))(SO(3))(6)] x 4H(2)O (4) was synthesized by reacting Na(2)Mo(VI)O(4) x 2H(2)O with CoCl(2) x 6H(2)O and (NH(4))(2)SO(3) with precise control of pH (5.3) through a redox reaction. The X-ray crystal structures of compounds 1, 2, and 4 were determined. The structure of compound 1 consists of a ring of four alternately face- and edge-sharing Mo(VI)O(6) octahedra capped by the trigonal pyramidal sulfite anion, while at the base of the Mo(4) ring is an oxo group which is asymmetrically shared by all four molybdenum atoms. Compound 3 is based on the Strandberg-type heteropolyion [Mo(5)(VI)S(2)O(21)](4-), and these coordinatively saturated clusters are joined by diprotonated 4,4'-H(2)bipy(2+) through strong hydrogen bonds. Compound 3 crystallizes in the chiral space group C2. The structure of compound 4 consists of a novel trinuclear [Co(III)Mo(2)(V)SO(3)(2-)] cluster. The chiral compound 3 exhibits nonlinear optical (NLO) and photoluminescence properties. The assignment of the sulfite bands in the IR spectrum of 4 has been carried out by density functional calculations. The cobalt in 4 is a d(6) octahedral low-spin metal atom as it was evidenced by magnetic susceptibility measurements, cw EPR, BVS, and DFT calculations. The IR and solid-state UV-vis spectra as well as the thermogravimetric analyses of compounds 1-4 are also reported.     

Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

Oxygen atom transfer in models for molybdenum enzymes: isolation and structural, spectroscopic, and computational studies of intermediates in oxygen atom transfer from molybdenum(VI) to phosphorus(III)

Intermediates in the oxygen atom transfer from Mo(VI) to P(III), [Tp(iPr)MoOX(OPR3)] (Tp(iPr) = hydrotris(3-isopropylpyrazol-1-yl)borate; X = Cl-, phenolates, thiolates), have been isolated from the reactions of [Tp(iPr)MoO2X] with phosphines (PEt3, PMePh2, PPh3). The green, diamagnetic oxomolybdenum(IV) complexes possess local C(1) symmetry (by NMR spectroscopy) and exhibit IR bands assigned to nu(Mo==O) (approximately 950 cm(-1)) and nu(P==O) (1140-1083 cm(-1)) vibrations. The X-ray crystal structures of [Tp(iPr)MoOX(OPEt3)] (X = OC6H4-2-sBu, SnBu), [Tp(iPr)MoO(OPh)(OPMePh2)], and [Tp(iPr)MoOCl(OPPh3)] have been determined. The monomeric complexes exhibit distorted octahedral geometries, with coordination spheres composed of tridentate fac-Tp(iPr) and mutually cis monodentate terminal oxo, phosphoryl (phosphine oxide), and monoanionic X ligands. The electronic structures and stabilities of the complexes have been probed by computational methods, with the three-dimensional energy surfaces confirming the existence of a low-energy steric pocket that restricts the conformational freedom of the phosphoryl ligand and inhibits complete oxygen atom transfer. The reactivity of the complexes is also briefly described.     

Complexation of molybdenum(V) with glycolic acid: an unusual orientation of glycolato ligand in {Mo2O4}2+ complexes

(PyH)5[Mo(V)OCl4(H2O)]3Cl2 and (PyH)n[Mo(V)OBr4]n reacted with glycolic acid (H2glyc) or its half-neutralized ion (Hglyc(-)) to afford a series of novel glycolato complexes based on the {Mo(V)2O4}2+ structural core: (PyH)3[Mo2O4Cl4(Hglyc)]. (1)/ 2CH 3CN (1), (PyH) 3[Mo 2O 4Br 4(Hglyc)].Pr(i)OH(2), (PyH)2[Mo2O4(glyc) 2Py 2] (3), (PyH) 4[Mo 4O 8Cl 4(glyc) 2].2EtOH (4), and [Mo 4O 8(glyc) 2Py 4] (5) (Py = pyridine, C 5H 5N; PyH(+) = pyridinium cation, C 5H 5NH (+) and glyc (2-) = a doubly ionized glycolate, (-)OCH 2COO (-)). The compounds were fully characterized by X-ray crystallography and infrared spectroscopy. The Hglyc (-) ion binds to the {Mo 2O 4} (2+) core through a carboxylate end in a bidentate bridging manner, whereas the glyc (2-) ion adopts a chelating bidentate coordination through a deprotonated hydroxyl group and a monodentate carboxylate. The orientations of glyc (2-) ions in 3- 5 are such that the alkoxyl oxygen atoms occupy the sites opposite the multiply bonded oxides. {(C6H5) 4P}[Mo(VI)O 2(glyc)(Hglyc)] ( 6), an oxidized complex, features a reversed orientation of the glyc(2-) ion. The theoretical DFT calculations on the [Mo(V)2O4(glyc) 2Py 2](2-) and [Mo(VI)O2(glyc)2](2-) ions confirm that binding of glycolate with the alkoxyl oxygen to the site opposite the MoO bond is energetically more favorable in {Mo(V)2O4}(2+) species, whereas a reversed orientation of the ligand is preferred in Mo(VI) complexes. An explanation based on the orbital analysis is put forward.     

Oxygen Abstraction Reactions of N-Substituted Hydroxamic Acids with Molybdenum(V) and Vanadium(III) and -(IV) Compounds

A wide range of N-substituted mono- and dihydroxamic acids undergo oxygen abstraction on reaction with V(III), V(IV), and Mo(V) compounds to form hydroxamates of V(V) and Mo(VI) respectively together with the corresponding amides and diamides. The molybdenyl and vanadyl hydroxamates form metal-oxygen clusters under FABMS conditions. The X-ray crystal structures of [MoO(2){CH(3)(CH(2))(n)()C(O)N(C(6)H(5))O}(2) (1 and 2) (n = 4, 5) show monomeric structures with structural trans effects and consequent weakening of the Mo-O(ligand) bonds which may account for the tendency to form clusters in FABMS. In constrast, the electrospray MS of the vanadyl dihydroxamates, VO(OH)[PhN(O)C(O)(CH(2))(n)()C(O)N(O)Ph] (n = 3, 5) and VO(OH)[p-CH(3)C(6)H(4)N(O)C(O) (CH(2))(n)()C(O)N(O)C(6)H(4)-CH(3)) (n = 2, 4) show the presence of dimers in solution.     

Oxo/sulfidotungstate(VI) as precursors to W(VI)O2, W(VI)OS, and W(VI)S2 complexes and W(IV)-dithiolene chelate rings

Synthetic models leading to oxosulfidotungsten(VI) groups and dithiolene chelate rings have been investigated. The heterogeneous reaction systems [WO4-nSn]2-/2Ph3SiCl/Me4phen (n = 0-2) in acetonitrile afford the complexes [WQ2(OSiPh3)2(Me4phen)] (1-3) in the indicated yields containing the groups W(VI)O2 (1; 86%), W(VI)O2 (2; 45%), and W(VI)S2 (3; 83%). In the crystalline state these complexes have imposed C2 symmetry, with cis-oxo/sulfido and trans-silyloxide ligands. 1H NMR spectra indicate that this stereochemistry is retained in solution. The colors of 2 (yellow, 367 nm) and 3 (orange, 451 nm) arise from LMCT absorptions at the indicated wavelengths. These results demonstrate that the silylation procedure previously introduced for the preparation of molecules with the Mo(VI)OS group (Thapper, et al. Inorg. Chem. 1999, 38, 4104) extends to tungsten. Methods for the formation of dithiolene chelate rings MS2C2R2 in reactions with sulfide-bound M = Mo or W precursors are summarized. In a known reaction type, 3 and activated acetylenes rapidly form [W(IV)(OSiPh3)2(Me4phen)(S2C2R2)] (R = CO2Me, 4, 83%, and Ph, 5, 98%). In a new reaction type not requiring the isolation of an intermediate, the systems [MO2S2]2-/2Ph3SiCl/Me4phen/PhC=CPh in acetonitrile afford 5 (68%) and [Mo(IV)(OSiPh3)2(Me4phen)(S2C2Ph2)] (6; 61%). Complexes 5 and 6 are isostructural, maintain the trans-silyloxide stereochemistry, and exhibit chelate ring dimensions indicative of ene- 1,2-dithiolate coordination. Reductions in the -1.4 to -1.7 V range are described as metal-centered. It remains to be seen whether the oxo/sulfidotungsten(VI) groups in 1-3 eventuate in the active sites of tungstoenzymes. (Me4phen = 3,4,7,8-tetramethyl-1,10-phenanthroline.)     

Further evidence for the tetraoxoiodate(V) anion,IO(4)(3-): hydrothermal syntheses and structures of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O and Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O

The hydrothermal reaction of MoO(3) with BaH(3)IO(6) at 180 degrees C for 3 days results in the formation of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O (1). Under similar conditions, the reaction of Ba(OH)(2) x 8H(2)O with MoO(3) and Ba(IO(4))(2) x 6H(2)O yields Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O (2). The structure of 1, determined by single-crystal X-ray diffraction, consists of corner- and edge-sharing distorted MoO(6) octahedra that create two-dimensional slabs. Contained within this molybdenum oxide framework are approximately C(2v) tetraoxoiodate(V) anions, IO(4)(3-), that are involved in bonding with five Mo(VI) centers. The two equatorial oxygen atoms of the IO(4)(3-) anion chelate a single Mo(VI) center, whereas the axial atoms are mu(3)-oxo groups and complete the octahedra of four MoO(6) units. The coordination of the tetraoxoiodate(V) anion to these five highly electropositive centers is probably responsible for stabilizing the substantial anionic charge of this anion. The Ba(2+) cations separate the layers from one another and form long ionic contacts with neighboring oxygen atoms and a water molecule. Compound 2 also contains distorted MoO(6) octahedra. However, these solely edge-share with octahedral hexaoxoiodate(VII), IO(6)(5-), anions to form zigzagging one-dimensional, (1)(infinity)[(MoO(2))(IO(6))](3-), chains that are polar. These chains are separated from one another by Ba(2+) cations that are coordinated by additional water molecules. Bond valence sums for the iodine atoms in 1 and 2 are 5.01 and 7.03, respectively. Crystallographic data: 1, monoclinic, space group C2/c, a = 13.584(1) A, b = 7.3977(7) A, c = 20.736(2) A, beta = 108.244(2) degrees, Z = 4; 2, orthorhombic, space group Fdd2, a = 13.356(7) A, b = 45.54(2) A, c = 4.867(3) A, Z = 8.     

O-atom-transfer oxidation of [molybdenum(IV) oxo{3,6-(acylamino)2- 1,2-benzenedithiolato}2]2- promoted by intramolecular NH...S hydrogen bonds

Novel molybdenum dithiolene compounds having neighboring amide groups as models for molybdoenzymes, (NEt(4))(2)[Mo(IV)O{1,2-S(2)-3,6-(RCONH)(2)C(6)H(2)}(2)] (R = CH(3), CF(3), t-Bu, Ph(3)C), were designed and synthesized. The contributions of the NH...S hydrogen bond to the electrochemical properties of the metal ion and the reactivity of the O-atom-transfer reaction were investigated by a comparison with [Mo(IV)O(1,2-S(2)C(6)H(4))(2)](2)(-). The MoOS(4) core of [Mo(IV)O{1,2-S(2)-3,6-(CH(3)CONH)(2)C(6)H(2)}(2)](2)(-) shows no significant geometrical difference from that of [Mo(IV)O(1,2-S(2)C(6)H(4))(2)](2)(-) in the crystal. The hydrogen bonds positively shifted the Mo(IV/V) redox potential and accelerated the reduction of Me(3)NO.     

Synthesis and catalytic properties of molybdenum(VI) complexes with tris(3,5-dimethyl-1-pyrazolyl)methane

The complex [MoO(2)Cl{HC(3,5-Me(2)pz)(3)}]BF(4) (1) (HC(3,5-Me(2)pz)(3) = tris(3,5-dimethyl-1-pyrazolyl)methane) has been prepared and examined as a catalyst for epoxidation of olefins at 55 °C using tert-butyl hydroperoxide (TBHP) as the oxidant. For reaction of cis-cyclooctene, epoxycyclooctane is obtained quantitatively within 5 h when water is rigorously excluded from the reaction mixture. Increasing amounts of water in the reaction mixture lead to lower activities (without affecting product selectivity) and transformation of 1 into the trioxidomolybdenum(VI) complex [{HC(3,5-Me(2)pz)(3)}MoO(3)] (4). Complex 4 was isolated as a microcrystalline solid by refluxing a suspension of 1 in water. The powder X-ray diffraction pattern of 4 can be indexed in the orthorhombic Pnma system, with a = 16.7349(5) ?, b = 13.6380(4) ?, and c = 7.8513(3) ?. Treatment of 1 in dichloromethane with excess TBHP led to isolation of the symmetrical [Mo(2)O(4)(μ(2)-O){HC(3,5-Me(2)pz)(3)}(2)](BF(4))(2) (2) and unsymmetrical [Mo(2)O(3)(O(2))(2)(μ(2)-O)(H(2)O){HC(3,5-Me(2)pz)(3)}] (3) oxido-bridged dimers, which were characterized by single-crystal X-ray diffraction. Complex 2 displays the well-known (Mo(2)O(5))(2+) bridging structure where each dioxidomolybdenum(VI) center is coordinated to three N atoms of the organic ligand and one μ(2)-bridging O atom. The unusual complex 3 comprises dioxido and oxidodiperoxo molybdenum(VI) centers linked by a μ(2)-bridging O atom, with the former center being coordinated to the tridentate N-ligand. The dinuclear complexes exhibit a similar catalytic performance to that found for mononuclear 1. For complexes 1 and 2 use of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate and N-butyl-3-methylpyridinium tetrafluoroborate as solvents allowed the complexes to be completely dissolved, and in each case the catalyst and IL could be recycled and reused without loss of activity.     

Hydride transfer reactivity of tetrakis(trimethylphosphine)(hydrido)(nitrosyl)molybdenum(0)

The tetrakis(trimethylphosphine) molybdenum nitrosyl hydrido complex trans-Mo(PMe(3))(4)(H)(NO) (2) and the related deuteride complex trans-Mo(PMe(3))(4)(D)(NO) (2a) were prepared from trans-Mo(PMe(3))(4)(Cl)(NO) (1). From (2)H T(1 min) measurements and solid-state (2)H NMR the bond ionicities of 2a could be determined and were found to be 80.0% and 75.3%, respectively, indicating a very polar Mo--D bond. The enhanced hydridicity of 2 is reflected in its very high propensity to undergo hydride transfer reactions. 2 was thus reacted with acetone, acetophenone, and benzophenone to afford the corresponding alkoxide complexes trans-Mo(NO)(PMe(3))(4)(OCHR'R') (R' = R' = Me (3); R' = Me, R' = Ph (4); R' = R' = Ph (5)). The reaction of 2 with CO(2) led to the formation of the formato-O-complex Mo(NO)(OCHO)(PMe(3))(4) (6). The reaction of with HOSO(2)CF(3) produced the anion coordinated complex Mo(NO)(PMe(3))(4)(OSO(2)CF(3)) (7), and the reaction with [H(Et(2)O)(2)][BAr(F)(4)] with an excess of PMe(3) produced the pentakis(trimethylphosphine) coordinated compound [Mo(NO)(PMe(3))(5)][BAr(F)(4)] (8). Imine insertions into the Mo-H bond of 2 were also accomplished. PhCH[double bond, length as m-dash]NPh (N-benzylideneaniline) and C(10)H(7)CH=NPh (N-1-naphthylideneaniline) afforded the amido compounds Mo(NO)(PMe(3))(4)[NR'(CH(2)R')] (R' = R' = Ph (9), R' = Ph, R' = naphthyl (11)). 9 could not be obtained in pure form, however, its structure was assigned by spectroscopic means. At room temperature 11 reacted further to lose one PMe(3) forming 12 (Mo(NO)PMe(3))(3)[N(Ph)CH(2)C(10)H(6))]) with agostic stabilization. In a subsequent step oxidative addition of the agostic naphthyl C-H bond to the molybdenum centre occurred. Then hydrogen migration took place giving the chelate amine complex Mo(NO)(PMe(3))(3)[NH(Ph)(CH(2)C(10)H(6))] (15). The insertion reaction of 2 with C(10)H(7)N=CHPh led to formation of the agostic compound Mo(NO)(PMe(3))(3)[N(CH(2)Ph)(C(10)H(7))] (10). Based on the knowledge of facile formation of agostic compounds the catalytic hydrogenation of C(10)H(7)N=CHPh and PhN=CHC(10)H(7) with 2 (5 mol%) was tested. The best conversion rates were obtained in the presence of an excess of PMe(3), which were 18.4% and 100% for C(10)H(7)N=CHPh and PhN=CHC(10)H(7), respectively.     

Monodithiolene molybdenum(V, VI) complexes: a structural analogue of the oxidized active site of the sulfite oxidase enzyme family

The active sites of the xanthine oxidase and sulfite oxidase enzyme families contain one pterin-dithiolene cofactor ligand bound to a molybdenum atom. Consequently, monodithiolene molybdenum complexes have been sought by exploratory synthesis for structural and reactivity studies. Reaction of [MoO(S(2)C(2)Me(2))(2)](1-) or [MoO(bdt)(2)](1-) with PhSeCl results in removal of one dithiolate ligand and formation of [MoOCl(2)(S(2)C(2)Me(2))](1-) (1) or [MoOCl(2)(bdt)](1-) (2), which undergoes ligand substitution reactions to form other monodithiolene complexes [MoO(2-AdS)(2)(S(2)C(2)Me(2))](1-) (3), [MoO(SR)(2)(bdt)](1-) (R = 2-Ad (4), 2,4,6-Pr(i)(3)C(6)H(2) (5)), and [MoOCl(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (6) (Ad = 2-adamantyl, bdt = benzene-1,2-dithiolate). These complexes have square pyramidal structures with apical oxo ligands, exhibit rhombic EPR spectra, and 3-5 are electrochemically reducible to Mo(IV)O species. Complexes 1-6 constitute the first examples of five-coordinate monodithiolene Mo(V)O complexes; 6 approaches the proposed structure of the high-pH form of sulfite oxidase. Treatment of [MoO(2)(OSiPh(3))(2)] with Li(2)(bdt) in THF affords [MoO(2)(OSiPh(3))(bdt)](1-) (8). Reaction of 8 with 2,4,6-Pr(i)(3)C(6)H(2)SH in acetonitrile gives [MoO(2)(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (9, 55%). Complexes 8 and 9 are square pyramidal with apical and basal oxo ligands. With one dithiolene and one thiolate ligand of a square pyramidal Mo(VI)O(2)S(3) coordination unit, 9 closely resembles the oxidized sites in sulfite oxidase and assimilatory nitrate reductase as deduced from crystallography (sulfite oxidase) and Mo EXAFS. The complex is the first structural analogue of the active sites in fully oxidized members of the sulfite oxidase family. This work provides a starting point for the development of both structural and reactivity analogues of members of this family.     

Kinetic and thermodynamic preferences for the diastereoselective oxidative addition of H(2) to trans-Ir(PR(3))(2)(CO)Cl: monodentate chiral phosphines may impart exceptional degrees of diastereoselectivity

Studies on square planar iridium complexes of the type trans-Ir(PR(3))(2)(CO)Cl, where PR(3) is PhP[(C(5)Me(4))](2), PhP[Me(2)C(4)H(6)], or PhP[Pr(i)(2)C(4)H(6)], demonstrate that monodentate chiral phosphines impart exceptional degrees of diastereoselectivity in the oxidative addition of H(2). Thus, the oxidative addition of H(2) to the two faces of the meso isomer (R,S)-trans-Ir(PR(3))(2)(CO)Cl proceeds with a kinetic diastereoselectivity which exceeds that for related square planar iridium complexes employing bidentate chiral phosphine ligands. Furthermore, the kinetically favored dihydride is not favored thermodynamically, and the magnitude of the inversion of the kinetic and thermodynamic selectivities is greater than has previously been observed using bidentate phosphines.     

Precursors to [FeFe]-hydrogenase models: syntheses of Fe2(SR)2(CO)6 from CO-free iron sources

This report describes routes to iron dithiolato carbonyls that do not require preformed iron carbonyls. The reaction of FeCl 2, Zn, and Q 2S 2C n H 2 n (Q (+) = Na (+), Et 3NH (+)) under an atmosphere of CO affords Fe 2(S 2C n H 2 n )(CO) 6 ( n = 2, 3) in yields >70%. The method was employed to prepare Fe 2(S 2C 2H 4)( (13)CO) 6. Treatment of these carbonylated mixtures with tertiary phosphines, instead of Zn, gave the ferrous species Fe 3(S 2C 3H 6) 3(CO) 4(PR 3) 2, for R = Et, Bu, and Ph. Like the related complex Fe 3(SPh) 6(CO) 6, these compounds consist of a linear arrangement of three conjoined face-shared octahedral centers. Omitting the phosphine but with an excess of dithiolate, we obtained the related mixed-valence triiron species [Fe 3(S 2C n H 2 n ) 4(CO) 4] (-). The highly reducing all-ferrous species [Fe 3(S 2C n H 2 n ) 4(CO) 4] (2-) is implicated as an intermediate in this transformation. Reactive forms of iron, prepared by the method of Rieke, also combined with dithiols under a CO atmosphere to give Fe 2(S 2C n H 2 n )(CO) 6 in modest yields under mild conditions. Studies on the order of addition indicate that ferrous thiolates are formed prior to the onset of carbonylation. Crystallographic characterization demonstrated that the complexes Fe 3(S 2C 3H 6) 3(CO) 4(PEt 3) 2 and PBnPh 3[Fe 3(S 2C 3H 6) 4(CO) 4] feature high-spin ferrous and low-spin ferric as the central metal, respectively.