ELECTRICAL AND MECHANICAL PROPERTIES OF POLYANILINE FILMS——EFFECT OF NEUTRAL SALTS ADDED DURING POLYMERIZATION*

The electrical and mechanical properties of polyaniline (PANI) films syn-thesized by the presence of the selected neutral salts in the polymerization were measuredas a function of the properties and the concentration of the selected neutral salts, andthe protonation state. It was found that both the electrical and mechanical properties ofPANI films were enhanced by adding neutral salts in the polymerization. The adding ofthe neutral salts in the polymerization resulted in extended conformation of polymer chainand increasing of molecular weight of PANI, which may be the reasons why the electricaland mechanical properties of PANI films were improved by the presence of neutral salts inthe polymerization.     

IMPEDANCE CHARACTERISTICS OF POLYFURAN FILMS

Electrochemical impedance spectroscopy (EIS) was first used for the characterization of polyfuran (PFu) films thathad been formed electrochemically on an Au electrode. The polyfuran was measured in high oxidation state, intermediateoxidation state and reduction state, respectively. As the oxidation level is increased, the ionic conductivity of PFu/BF_4~-increases. And impedance studies on PFu show that the anion BF_4~- appears to be mobile with a high diffusion coefficient ofapproximately 10~(-8)cm~2· s~(-1).     

DYNAMIC MECHANICAL RESPONSE OF CRAZES IN POLYSTYRENE

Dynamic mechanical analysis was used to study the mechanical properties and microstructureof crazes in polystyrene produced in air or in methanol at different temperatures. A new loss peakwas found at about 82℃,which is assigned to glass transition peak of craze fibrils. The decreaseof glass transition temperature of polymer in craze fibrils is due to the high values of surface tovolume ratio. The glass transition temperature ratio of craze fibrils to bulk material (T_g~l /Tg) hasbeen expressed as a function of the fibrils diameter (d). From T_g~l of craze fibrils,the value of fibrildiameter can be calculated. Annealing the crazed specimen at room temperature makes the fibrilsplastically deform and cause the fibrils to thin slightly,whereas annealing the crazed specimen atthe temperature near T_g of the craze fibrils makes the fibrils bundle together.     

PREPARATION OF Fe3O4/PSt MAGNETIC PARTICLES IN THE PRESENCE OF MAGNETIC FLUID IN ETHANOL/WATER MIXTURE*

Fe_3O_4/Polystyrene(PSt) magnetic particles with core/shell structure have been prepared in thepresence of Fe_3O_4 magnetic fluid in ethanol/water medium by dispersion polymeriation of styrene. A Fe_3O_4particle formation mechanism was proposed. According to this mechanism, the size of particle nuclei isdetermined by the extent of aggregation of Fe_3O_4 /oligomer. Magnetic particles with diameter ranging from 5to 200 μm were prepared under different reaction conditions. Some polymerization parameters such as theconcentration of monomer, stabilizer, initiator, and ethanol which affect particle size and size distribution arediscussed and their effect on particle formation are explained by the proposed mechanism.     

SEED SEMICONTINUOUS EMULSION MULTI-COPOLYMERIZATION OF (METH) ACRYLATES WITH HIGH-SOLID CONTENT: EFFECT OF THE OPERATION CONDITIONS

The seeded semicontinuous emulsion multi-copolymerization of butyl acrylate (BA),2-ethylhexyl acrylate (2EHA), methyl methacrylate (MMA), 2-hydroxyl propyl acrylate(HOPA) and acrylic acid (AA) was used to prepare the acrylic latexes with high-solidcontent. The effects of monomer emulsion feed rates (R_a) and (R/E)_E values, the ratio ofemulsifier amount between the initial charge (R) and the addition monomer emulsion (E),on the polymerization reaction features, the viscosities, surface tensions,particle sizes andparticle sizes distributions of latexes,T_g and the insoluble fractions of films, the 180° peelstrength, tack and holding power of pressure-sensitive adhesive (PSA) tapes, preparedfrom the latexes, were studied. Experimental study shows that the grafting and cross-linking fraction in the PSA tapes must be controlled within a suitable range to keep thebalance of the 180° peel strength, tack and holding power.     

MORPHOLOGICAL OBSERVATION OF SINGLE-CHAIN POLY (METHYL METHACRYLATE) PARTICLES*

Tapping mode atomic force microscope has been applied to observe single-chain PMMAparticles which were stored for six months at room temperature after sprayed from verydilute solutions in good solvents, good/poor mixed solvents, and a theta solvent. Monodis-perse PMMA standards of molecular weights ranging from 7.90×10~4 to 1.3×10~6 wereused to investigate the effect of molecular weight oh the size of the single-chain PMMAparticles. These single-chain particles showed close to spherical shapes. The morphologyof single-chain PMMA particles of a given molecular weight was found to be identical inspite of different solvents used for solution spraying. Molecular weigh dependence of theparticle dimension was also found. The diameters of single-chain PMMA particles aftercorrection of tlp-geometry effect were compared to the values estimated from molecularweight and density.     

LIGHT-SCATTERING STUDY OF POLYELECTROLYTE HOLLOW CAPSULES

Silver halide (AgX) microcrystal was used as template to synthesize hollow polyelectrolyte capsules. These hollow capsules were characterized by laser light scattering (LLS) used to measure the size of the capsules in solution. The ratio of hydrodynamic radius (Rh) from dynamic LLS to the radius of gyration (Rg) from static LLS is almost unity, revealing that the entities are hollow in solution. The results suggest that the LLS method can be regarded as a good complement to the confocal laser scanning microscopy (CLSM) method for the characterization of small hollow capsules, and it possesses the advantage of not needing fluorescence labeling.     

ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

TURNING-OVER OF THE ELECTRIC DIPOLE IN A POLYMER*

The transition from the biexciton to the exciton can turn over the direction of the electric dipole of a polymericmolecule. This turning-over action combined with the photoinduced polarization reversion can be used as a switch. Theswitching speed is governed by the relaxation time of the turning-over process, which can be determined by a dynamicalsimulation.     

STATISTICAL PROPERTIES OF LONG-RANGE CONTACTS IN GLOBULAR PROTEINS

The analysis of residue-residue contacts in protein structures can shed some light on our understanding of the folding and stability of proteins. In this paper, we study the statistical properties of long-range and short-range residue-residue contacts of 91 globular proteins using CSU software and analyze the importance of long-range contacts in globular protein structure. There are many short-range and long-range contacts in globular proteins, and it is found that the average number of long-range contacts per residue is 5.63 and the percentage of residue-residue contacts which are involved in long-range ones is 59.4%. In more detail, the distribution of long-range contacts in different residue intervals is investigated and it is found that the residues occurring in the interval range of 4-10 residues apart in the sequence contribute more long-range contacts to the stability of globular protein. The number of long-range contacts per residue, which is a measure of ability toform residue-residue contacts, is also calculated for 20 different amino acid residues. It is shown that hydrophobic residues (including Leu, Val, Ile, Met, Phe, Tyr, Cys and Trp) having a large number of long-range contacts easily form long-range contacts, while the hydrophilic amino acids (including Ala, Gly, Thr, His, Glu, Gln, Asp, Asn, Lys, Ser, Arg, and Pro) form long-range contacts with more difficulty. The relationship between the Fauchere-Pliska hydrophobicity scale (FPH) and the number of short-range and long-range contacts per residue for 20 amino acid residues is also studied. An approximately linear relationship between the Fauchere-Pliska hydrophobicity scale (FPH) and the number of long-range contacts per residue CL is found and can be expressed as     

RHEOLOGICAL BEHAVIOR OF ERWINIA GUM IN AQUEOUS SOLUTION*

Erwinia (E) gum, an extracellular polysaccharide, is composed of fucose, galatose, glucose andglucuronic acid. Its viscosity behavior was investigated by a low-shear-rate multiball viscometer and arotational viscometer. Its weight-average molecular weight M_w and intrinsic viscosity [η] in 0.2 mol/L NaClaqueous solution were measured by light scattering method at 35℃and viscometry at 25℃and found to be1.06×10~6 g/mol and 1050 mL/g, respectively, and its aggregates in aqueous solution were proved by gelpermeation chromatography (GPC). These results indicated that E gum in water has exceedingly highviscosity and exhibits Binham fluid behavior, owing to its aggregation. The viscosity of E gum decreasedwith increasing temperature, and the turning point appeared at 38℃for dilute solution and 80℃forconcentrated solution suggesting that the aggregates of E gum in water started to disaggregate under thesetemperatures. In addition, the aggregates can be disrupted by adding either acid or base. The experimentalresults indicated that the E gum is a good thickening agent, and its fluid behavior is similar to xanthan.     

ENVIRONMENTAL STABILITY OF THE POLYENE PREPARED BY DEHYDROCHLORINATION OF POLY(VINYL CHLORIDE)

A high-quality polyene can be obtained by exensive dehydrochlorination of poly(vinyl chloride) (PVC) in aliquid/solid two-phase system. The liquid phase is a tetrahydrofuran solution of PVC containing a small amount ofpoly(ethylene glycol) with molar mass of 400 g as a phase transfer catalys. The solid phase is potassium hydroxide particles.The structure of the polyene is polyacetylene-like and has a long conjugated C=C sequence and a narrow dispersity ofpolyene sequences according to its FT-infrared and Raman spectra. The environmental stability of the polyene was alsostudied by IR, Raman spectra and elemental analysis. Experimental results demonstrated that the polyene was susceptible toair and could be changed into a material containing high concentrations of hydroxyl and carbonyl groups. The polyenesequences were shortened and its dispersity became broader due to the effect of dioxygen.     

STUDY ON THE MICROSTRUCTURE AND PROPERTY OF PET FIBER BY LASER RAMAN MICROSCOPE

In this paper, the microstructure change of one step-draw PET fiber has been studied byvarious methods, such as, Laser Raman Microscope, Wide-angle X-ray, Density-gradient andPolarizing Microscope. The computer has been used to resolve overlapped bands in the Ramanspectra. Then the band changes have been correlated with trans, gauche and stressed trans-conformations indicated by a conformational index. Based on these indices, the relationshipbetween the conformation change of glycol units in the fiber structure and the macromechanicalproperties of fiber is expounded.     

POLYMETHYLMETHACRYLATE FILMS IN THE STATE OF HIGH GLOBAL CHAIN ORIENTATION BUT NEARLY RANDOM SEGMENTAL ORIENTATION*

PMMA films in the high global chain orientation and nearly random segmental orientation(GOLR) state were prepared by uni-axially drawing at temperatures 20～30℃ above its glass transitiontempefature, T_g, and their isotropic and anisotropic properties were studied. Experimental results show thatthis kind of amorphous state, the GOLR state, is nearly isotropic in optical birefringence, IR-dichroism andX-ray diffraction patterns, but is very anisotropic in behaviors of thermal expansion, solvent-swelling andstress-strain.     

SYNTHESIS OF POLY(2,5-DIPHENYL-1,3,4-THIADIAZOLYL)-4,4'-VINYLENE AND ITS ELECTROLUMINESCENT PERFORMANCE*

The synthesis, characterization and electroluminescence performance of a new type of conjugatedpolymer, poly(2,5-diphenyl-1,3,4-thiadiazolyl)-4,4'-vinylene (TPPV) are presented. A light-emitting diodeconsisted of ITO/TPPV/Al is driven at about 4.0 V and has a peak emission wavelength of 485 nm. Thisblue-shift of the peak is due to the decrease of conjugate degree of TPPV compared to PPV. This result is inaccord with that determined by XPS and theoretical model of MNDO/3     

THE ASYMMETRIC SYNTHESIS OF AMINO ACIDS UNDER POLYMER-SUPPORTED PHASE TRANSFER CATALYTIC CONDITION

The optical α-amino acids were synthesized under room temperature byalkylation of N-(diphenyl methylene) glycine t-butyl ester under polymer-supported phasetransfer conditions using polymer-supported cinchonine (or quinine) alkaloids as chiralphase transfer catalysts and dichloromethane as solvent, followed by hydrolysis of theabove intermediates introduced to the final products-optical α-amino acids. This is anew method for the asymmetric synthesis of α-amino acids. The influences of catalyst,temperature, substrates, and organic solvents on the chemical yield and optical purities ofproducts were studied.     

DETERMINATION OF PHASE INVERSION POINT IN THE EMULSIFICATION OF POLYMERS

Polymer Physics Laboratory, Institute of Chemistry,The Chinese Academy of Sciences, Beijing 100080, China     

THE INFLUENCE OF SUBSTITUENTS IN METALLOCENE ON PROPYLENE POLYMERIZATION*

Two new unbridged zirconocenes, bis(2,4,7-trimethyl indenyl)zirconium dichloride (Met-Ⅰ) andbis(2-methyl-4,7-diethyl indenyl)zirconium dichloride (Met-Ⅱ) were prepared in order to investigate thesteric effects of substituents on the nature of the catalysts for the polymerization of propylene. A mixture ofmethyl aluminoxane (MAO) and triisobutylaluminum [Al(iBu)_3] was used as cocatalyst to activate thesecatalysts. The decrease in steric bulkiness of substituents at 4 and 7 positions of the indenyl ring resulted inan increase of both activity and molecular weight as well as the isotacticity.     

CROSSLINKING AND COMPATIBILIZATION IN BLENDS OF POLYSTYRENE AND POLYETHYLENE

This paper investigated the influences of butadiene rubber (BR) and dicumylperoxide (DCP) on thermal and rheological behaviour, morphology and mechanical proper-ties of PS/LLDPE/SBS blend. Addition of DCP alone was found to decrease the mechanicalproperties of PS/LLDPE/SBS blend due to the decomposition of PS. When BR was addedtogether with DCP, it is found that the co-crosslinking of BR, SBS and PE takes place,and the decomposition of PS is reduced simultaneously because of the consumption of thefree radicals in the crosslinking process. Synergism was thus realised which resulted in theimprovement of the ductility of blend.     

DILUTE SOLUTION BEHAVIOR OF CHITOSAN IN DIFFERENT ACID SOLVENTS

Dilute solution behavior of chitosan was studied in formic acid, acetic acid, lactic acid andhydrochloric acid aqueous solution under different pH values. The reduced viscosities, η_(sp)/C,ofchitosan solutions were dependent on the properties of acid and pH value of solvents. For a givenchitosan concentration, η~(sp)/C decreased with the increase of acid concentration, or decreasing pHof solvent, indicating shielding effect of excessive acid similar to adding salt into solution. Thestabilities of dilute chitosan solution in formic acid and lactic acid were better than that in acetic acid and hvdrochloric acid.