Performance improvement of GaN-based light-emitting diode with a p-InAlGaN hole injection layer

The characteristics of a blue light-emitting diode(LED)with a p-InAlGaN hole injection layer(HIL)is analyzed numerically.The simulation results indicate that the newly designed structure presents superior optical and electrical performance such as an increase in light output power,a reduction in current leakage and alleviation of efficiency droop.These improvements can be attributed to the p-InAlGaN serving as hole injection layers,which can alleviate the band bending induced by the polarization field,thereby improving both the hole injection efficiency and the electron blocking efficiency.     

Performance improvement of blue InGaN light-emitting diodes with a specially designed n-AIGaN hole blocking layer

Blue InGaN light-emitting diodes （LEDs） with a conventional electron blocking layer （EBL）, a common n-A1GaN hole blocking layer （HBL）, and an n-A1GaN HBL with gradual A1 composition are investigated numerically, which involves analyses of the carrier concentration in the active region, energy band diagram, electrostatic field, and internal quantum efficiency （IQE）. The results indicate that LEDs with an n-AIGaN HBL with gradual AI composition exhibit better hole injection efficiency, lower electron leakage, and a smaller electrostatic field in the active region than LEDs with a conven tional p-A1GaN EBL or a common n-A1GaN HBL. Meanwhile, the efficiency droop is alleviated when an n-A1GaN HBL with gradual A1 composition is used.     

Performance enhancement of an InGaN light-emitting diode with an AIGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode （LED） with an A1GaN/InGaN superlattice （SL） electron-blocking layer （EBL） is studied numerically, which involves the light-current performance curve, internal quan- tum efficiency electrostatic field band wavefunction, energy band diagram carrier concentration, electron current density, and radiative recombination rate. The simulation results indicate that the LED with an A1GaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular A1GaN EBL or a normal A1GaN/GaN SL EBL because of the appropriately modified energy band diagram, which is favorable ibr the injection of holes and confinement of elec- trons. Additionally, the efficiency droop of the LED with an AIGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

Performance improvement of blue InGaN light-emitting diodes with a specially designed n-AlGaN hole blocking layer

Blue InGaN light-emitting diodes (LEDs) with a conventional electron blocking layer (EBL), a common n-AlGaN hole blocking layer (HBL), and an n-AlGaN HBL with gradual Al composition are investigated numerically, which involves analyses of the carrier concentration in the active region, energy band diagram, electrostatic field, and internal quantum efficiency (IQE). The results indicate that LEDs with an n-AlGaN HBL with gradual Al composition exhibit better hole injection efficiency, lower electron leakage, and a smaller electrostatic field in the active region than LEDs with a conventional p-AlGaN EBL or a common n-AlGaN HBL. Meanwhile, the efficiency droop is alleviated when an n-AlGaN HBL with gradual Al composition is used.     

Performance enhancement of an InGaN light-emitting diode with an AlGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode(LED) with an AlGaN/InGaN superlattice(SL)electron-blocking layer(EBL) is studied numerically,which involves the light-current performance curve,internal quantum efficiency electrostatic field band wavefunction,energy band diagram carrier concentration,electron current density,and radiative recombination rate.The simulation results indicate that the LED with an AlGaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular AlGaN EBL or a normal AlGaN/GaN SL EBL because of the appropriately modified energy band diagram,which is favorable for the injection of holes and confinement of electrons.Additionally,the efficiency droop of the LED with an AlGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

具有新型双空穴注入层的有机发光二极管

采用新型双空穴注入层N, N, N', N'-tetrakis(4-Methoxy-phenyl)benzidine/Copper phthalocyanine(MeO-TPD/CuPc)及器件结构:ITO/MeO-TPD(15 nm)/CuPc(15 nm)/ N, N'-Bis(naphthalen-1-yl)-N, N'-bis(phenyl)benzidine (NPB, 15 nm)/8-hydroxyquinoline (Alq₃, 50 nm)/LiF(1 nm)/Al(120 nm), 研制出高效有机发光二极管(器件D), 与其他器件(器件A, 没有空穴注入层的器件; 器件B, MeO-TPD单空穴注入层; 器件C, CuPc单空穴注入层)相比, 其性能得到明显改善. 器件D的起亮电压降至3.2 V, 比器件A, B, C的起亮电压分别降低了2, 0.3, 0.1 V. 器件D在10 V时, 其最大亮度为23893 cd/m², 最大功率效率为1.91 lm/W, 与器件A, B, C的最大功率效率相比, 分别提高了43% (1.34 lm/W), 22% (1.57 lm/W), 7% (1.79 lm/W). 性能改善的主要原因是由于空穴注入和传输性能得到了改善, 通过单空穴型器件的J-V 曲线对这一现象进行了分析. 关键词： 有机发光二极管 空穴注入层 功率效率 势垒     

Simulation study of blue InGaN multiple quantum well light-emitting diodes with different hole injection layers

InGaN-based light-emitting diodes with p-GaN and p-AlGaN hole injection layers are numerically studied using the APSYS simulation software.The simulation results indicate that light-emitting diodes with p-AlGaN hole injection layers show superior optical and electrical performance,such as an increase in light output power,a reduction in current leakage and alleviation of efficiency droop.These improvements can be attributed to the p-AlGaN serving as hole injection layers,which can alleviate the band bending induced by the polarization field,thereby improving both the hole injection efficiency and the electron blocking efficiency.     

渐变型量子阱垒层厚度对GaN基双波长发光二极管发光特性调控的研究

采用软件理论分析的方法对渐变型量子阱垒层厚度的InGaN双波长发光二极(LED)的载流子浓度分布、 能带结构、自发发射谱、内量子效率、发光功率及溢出电子流等进行研究.分析结果表明, 增大量子阱垒层厚度会影响空穴在各量子阱的注入情况, 对双波长LED各量子阱中空穴浓度分布的 均衡性及双波长发光光谱的调控起到一定作用,但会导致内量子效率严重下降; 而当以特定的方式从n电极到p电极方向递减渐变量子阱垒层厚度时, 活性层量子阱的溢出电子流 得到有效的控制, 双发光峰强度达到基本一致, 同时芯片的内量子效率下降得到了有效控制, 且具备大驱动电流下较好的发光特性.     

掺杂GaN间隔层对双波长发光二极管光谱调控作用的研究

采用软件理论分析的方法对p型及n型掺杂的GaN间隔层在InGaN/GaN多量子阱双波长发光二极管中对光谱调控作用进行模拟分析.分析结果表明,掺杂的GaN间隔层的引入,可以有效地控制各阱中的电子或空穴浓度,很好地解决了双波长发光二极管中两种阱发光强度不均的问题,并且通过控制阻挡层的厚度,可以调控两种阱中的载流子浓度,从而调控发光峰的相对强度.这些可以归因于掺杂GaN间隔层对电子或空穴的阻挡作用. 关键词： GaN 间隔层 数值模拟 双波长发光二极管     

Effects of hole injection layer thickness on the luminescent properties of white organic light-emitting diodes

This work investigates how the thickness of the hole injection layer (HIL) influences the luminescent characteristics of white organic light-emitting diodes (WOLED). Experimental results indicate that inserting a thin HIL (<200 Å) into a WOLED without an HIL reduces the brightness and clearly changes the chromaticity because the surface of the 4,4′,4″-tris{N,-(3-methylphenyl)-N-phenylamino}-triphenylamine) (m-MTDATA) film is extremely rough. In contrast, a dense film structure and the fine surface morphology of m-MTDATA of moderate thickness (350-650 Å) provides a uniform conducting path on which holes cross the indium tin oxide (ITO)/HIL interface, improving luminescent performance, associated with the relatively stable purity of the color of the emission, with Commission Internationale 1′Eclairage (CIE) coordinates of (x = 0.40, y = 0.40). However, inserting a thick HIL (>650 Å) reduces the luminescent performance and causes red-shift, because the holes and electrons in the effective emissive confinement region become less optimally balanced. Moreover, optimizing the device structure enables a bright WOLED with CIE coordinates of (x = 0.34, y = 0.33) to reach a luminance of 7685 cd/m² at a current density of 100 mA/cm², with a maximum luminous efficiency of 1.72 lm/W at 5.5 V.     

The performance enhancement in organic light-emitting diode using a semicrystalline composite for hole injection

A semicrystalline composite, 3, 4, 9, 10 perylenetetracarboxylic dianhydride （PTCDA） doped N,N＇-di（1-naphthyl）- N,N＇-diphenylbenzidine （NPB）, has been fabricated and characterized. An organic light-emitting diode using such a composite in hole injection exhibits the improved performance as compared with the reference device using neat NPB in hole injection. For example, at a luminance of 2000 cd/m2, the former device gives a current efficiency of 2.0cd/A, higher than 1.6cd/A obtained from the latter device. Furthermore, the semicrystalline composite has been shown thermally to be more stable than the neat NPB thin film, which is useful for making organic light emitting diodes with a prolonged lifetime.     

Droop improvement in blue InGaN light-emitting diodes with GaN/InGaN superlattice barriers

GaN/InGaN superlattice barriers are used in InGaN-based light-emitting diodes （LEDs）. The electrostatic field in the quantum wells, electron hole wavefunction overlap, carrier concentration, spontaneous emission spectrum, light-current performance curve, and internal quantum efficiency are numerically investigated using the APSYS simulation software. It is found that the structure with GaN/InGaN superlattice barriers shows improved light output power, and lower current leakage and efficiency droop. According to our numerical simulation and analysis, these improvements in the electrical and optical characteristics are mainly attributed to the alleviation of the electrostatic field in the active region.     

Optical joint density of states in InGaN/GaN-based multiple-quantum-well light-emitting diodes

The optical joint densities of states of three InGaN/GaN-based light-emitting diodes with different emission wavelengths (violet, blue and green) operated at various currents were investigated. The results indicate that the blueshift of the emission with increasing current is related to the variation in optical joint density of states. Thus, the blueshift is ascribed to the screening of the piezoelectric field by carriers. A tail at the low-energy end of the density of states, corresponding to localized states, was found, and the presence of these tails broadens the spectra of the devices.     

Enhanced performances of InGaN/GaN-based blue light-emitting diode with InGaN/AlInGaN superlattice electron blocking layer

InGaN/AlInGaN superlattice(SL) is designed as the electron blocking layer(EBL) of an InGaN/GaN-based lightemitting diode(LED). The energy band structure, polarization field at the last-GaN-barrier/EBL interface, carrier concentration, radiative recombination rate, electron leakage, internal quantum efficiency(IQE), current–voltage(I–V) performance curve, light output–current(L–I) characteristic, and spontaneous emission spectrum are systematically numerically investigated using APSYS simulation software. It is found that the fabricated LED with InGaN/AlInGaN SL EBL exhibits higher light output power, low forward voltage, and low current leakage compared with those of its counterparts.Meanwhile, the efficiency droop can be effectively mitigated. These improvements are mainly attributed to the higher hole injection efficiency and better electron confinement when InGaN/AlInGaN SL EBL is used.     

Enhanced performances of InGaN/GaN-based blue light-emitting diode with InGaN/AIInGaN superlattice electron blocking layer

InGaN/AIlnGaN superlattice （SL） is designed as the electron blocking layer （EBL） of an InGaN/GaN-based light- emitting diode （LED）. The energy band structure, polarization field at the last-GaN-barrier/EBL interface, carrier concen- tration, radiative recombination rate, electron leakage, internal quantum efficiency （IQE）, current-voltage （l-V） perfor- mance curve, light output-current （L-l） characteristic, and spontaneous emission spectrum are systematically numerically investigated using APSYS simulation software. It is found that the fabricated LED with InGaN/AIInGaN SL EBL exhibits higher light output power, low forward voltage, and low current leakage compared with those of its counterparts. Meanwhile, the efficiency droop can be effectively mitigated. These improvements are mainly attributed to the higher hole injection efficiency and better electron confinement when InGaN/AIlnGaN SL EBL is used.     

Improvement of characteristics of InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of InGaN light-emitting diode (LED) with a specific design of staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement of optical performance compared with the design of conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of LED could be one of the main reasons for these improvements.     

Solution-processed WOx hole injection layer for efficient fluorescent blue organic light-emitting diode

Solution-processed tungsten oxide (s-WO_x) interfacial layer for efficient hole injection in fluorescent blue organic light-emitting diode (OLED) is demonstrated. The OLED using 2-methyl-9,10-bis(naphthalen-2-yl)anthracene (MADN) as emitter shows luminous efficiency of 3.3 cd/A, power efficiency of 2.5 lm/W and external quantum efficiency of 4.6% with Commission Internationale d'Eclairage (CIE) color coordinates of (0.154, 0.102). Using MADN doped 1-4-di-[4-(N,N-diphenyl)amino]styryl-benzene as emitter, luminous efficiency of 10.8 cd/A, power efficiency of 6.4 lm/W and external quantum efficiency of 7.2% with CIE color coordinates of (0.167, 0.283) are achieved. Atomic force microscopy and X-ray photoelectron spectroscopy show that s-WO_x features superior film morphology and non-stoichiometry with slight oxygen deficiency. Current-voltage characteristics and impedance spectroscopy analysis indicate that s-WO_x behaves slightly enhanced hole injection and accordingly contributes to improved device performance in comparison with conventional vacuum thermal evaporation WO_x. Our results pave an alternative way for broadening WO_x application with solution process and advancing fluorescent blue OLEDs.     

Improvement of characteristics of an InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of an InGaN light-emitting diode (LED) with a specific design of a staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement in optical performance compared with the design of a conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of the LED could be one of the main reasons for these improvements.     

Increased performance of an organic light-emitting diode by employing a zinc phthalocyanine based composite hole transport layer

We demonstrate that the electroluminescent performances of organic light-emitting diodes are significantly improved by employing a zinc phthalocyanine （ZnPc）-based composite hole transport layer （c-HTL）. The optimum ris-（8-hydroxyquinoline）aluminum （Alq3）-based organic light-emitting diode with a c-HTL exhibits a lower turn-on voltage of 2.8 V, a higher maximum current efficiency of 3.40 cd/A and a higher maximum power efficiency of 1.91 lm/W, which are superior to those of the conventional device （turn-on voltage of 3.8 V, maximum current efficiency of 2.60 cd/A, and maximum power efficiency of 1.21 lm/W）. We systematically studied the effects of different kinds of N’-diphenyl-N,N’-bis（1-naphthyl）（1,1’-biphenyl）-4,4’diamine （NPB）：ZnPc c-HTL. Meanwhile, we also investigate their mechanisms different from that in the case of using ZnPc as buffer layer. The specific analysis is based on the absorption spectra of the hole transporting material and current density–voltage characteristics of the corresponding hole-only devices.     

Effects of the microstructure slab with pillars on light extraction of GaN light-emitting diode

The positive z direction relative light extraction efficiency of GaN light-emitting diodes with microstructure slab is calculated by three-dimensional finite-difference time-domain method, where the microstructure slab consists of a graphite lattice of pillars. The results show that the two-dimensional graphite-arranged pillars suppress light extraction. When there is a thick pillar in the middle of the pillars, the structure can enhance light extraction of the light-emitting diodes. The tower-like pillars, which are thin on the top of the pillars and thick on the bottom of the pillars, benefit the light extraction when the angle of the tower-like pillars is proper.