Luminescence kinetics and association equilibria of lanthanide ions in aqueous solutions

Luminescence life time measurement can be used under certain conditions to determine the thermodynamic constants of complex formation between the luminescent (central ion) and ligand. The basic equations correlating the life time and the equilibria constants were derived for two cases: the time for establishing the thermodynamic equilibrium is much shorter than the life time of the excited state of the central ion; and the time for establishing the equilibrium and the life time are of the same order of magnitude.     

Solubilization of lanthanide ions by cyclodextrins in basic aqueous solutions

Cyclodextrins form complexes with lanthanide ions in basic aqueous solutions. This complex formation in basic solution dramatically enhances the solubility of lanthanide ions, which are otherwise insoluble due to the formation of hydroxide gels. Solutions of the -cyclodextrin-Ce³⁺ complex effectively hydrolyze 2-deoxyadenosine-5-monophosphate to 2-deoxyadenosine.     

Determination of orotic acid in aqueous solutions by micellar electrokinetic capillary chromatography using sensitized lanthanide-ion luminescence detection

Summary A sensitive and selective laser-induced luminescence detection scheme for orotic acid in urine, separated by micellar electrokinetic capillary chromatography (MEKC) has been developed. The 325 nm line from a helium cadmium laser is used to excite orotic acid, which transfers its energy to terbium. Resultant luminescence of terbium is linear with orotic acid concentration over more than 2.5 orders of magnitude. This novel and practical system enables the detection of 50 nm orotic acid in urine in less than 1.5 minutes while using only nanoliters of sample. The significant decrease in analysis time over traditional methods (spectrophotometric and chromatographic) comes from the high efficiency of MEKC. A dramatic improvement in sensitivity and selectivity over UV detection in capillary electrophoresis is achieved through the use of laser-induced lanthanide ion energy transfer luminescence detection. Finally, no sample pretreatment is needed and the method is free from any known interferences in urine.     

Thermal diffusion with stepwise association equilibria in aqueous solutions of the ionic dyes methylene blue and methyl orange

Soret coefficients are measured conductimetrically for dilute aqueous solutions of the stepwise-associating ionic dyes methylene blue (chloride salt) and methyl orange (sodium salt) at 25°C. In contrast to the behavior of other dilute aqueous electrolytes, the Soret coefficients of the dyes increase with concentration. An approximate treatment of thermal diffusion of stepwise-associating solutes is developed to interpret the results. The analysis is used to estimate the intrinsic enthalpies of transport of the monomeric and the associated forms of the dyes. The enthalpy of association makes a large reactive contribution to the enthalpy of transport of methyl orange.     

A microcalorimetric study of the association of hexacyanoferrate(II) ions with calcium and magnesium ions in aqueous solution

Using flow microcalorimetry, the ion association reaction M²⁺(aq)+Fe(CN) ₆ ^4– (aq)=MFe(CN) ₆ ^2– (aq) (M=Ca, Mg) has been studied at 25°C over the ionic strength range 0.02 to 0.08 mol-dm^–3. Analyses of the data to obtain H^o, the enthalpy change at infinite dilution, are described. The value obtained for H^o is sensitive to the kind of functions used to correct for non-ideal behavior.     

Thermodynamics of surfactant-dye complex formation in aqueous solutions II. Sodium dodecyl sulfate and some azo oil dye systems

Spectrophotometric and thermodynamic investigations are reported of the interactions between anionic surfactant (sodium dodecyl sulfate) and six azo oil dyes (benzene azo naphthalene type) which have an amino group at 4-position of naphthalene. A pronounced spectral change in the dye solution occurs on addition of surfactant. For increasingly surfactant concentrations (below the CMC), the interaction between dye and surfactant is so sharp that the systems may be said to exhibit an isosbestic point; then a new absorption band appears at longer wavelengths. The spectral data can be quantitatively interpreted in terms of a complex formation. The equilibrium coefficients of the complex formation are determined at different temperatures. The thermodynamic parameters of the complex formations (the free energy change (G), enthalpy change (H) and change in entropy (S) are also calculated. The reaction of complex formation is exothermic (H negative).G is dependent on the hydrophobic nature andpKa of the dye. These complexes will form due to hydrophilic-hydrophilic interaction and will become more stable due to hydrophobic-hydrophobic interaction.With increasing amounts of complex, the infinite adsorption, the exhaustion and the rate constant of dyeing for nylon decrease.     

Quantum efficiency of the luminescence of Eu(III), Tb(III) and Dy(III) in aqueous solutions

Summary The luminescence quantum efficiency of Eu(III), Tb(III) and Dy(III) in chloride solutions as well as complexed by aminopolyacetic acids was determined. An interpretation of the observed dependences in the system investigated has been proposed.

---

Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in wäßrigen Lösungen

Zusammenfassung Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in Chloridlösung und in Komplexen mit Aminopolyessigsäuren wurde bestimmt. Eine Interpretation der beobachteten Abhängigkeiten im untersuchten System wurde vorgeschlagen.

     

Diffusion with hydrolysis and ion association in aqueous solutions of beryllium sulfate

Taylor dispersion is used to measure mutual diffusion coefficients for aqueous solutions of beryllium sulfate at concentrations from 0.005 to 1 mol-L^–1 at 25°C. Least-squares analysis of the dispersion profiles shows that diffusion of the partially hydrolyzed salt produces a small additional flow of sulfuric acid, about 0.04 mol sulfuric acid per mole of total beryllium sulfate. Ternary diffusion coefficients measured for the aqueous BeSO₄–H₂SO₄ system are qualitatively consistent with Nernst-Planck predictions based on the formation of beryllium sulfate ion pairs, bisulfate ions, and the hydrolysis equilibria 2Be²⁺+H₂O= Be₂OH³⁺+H⁺, 3Be²⁺+2H₂O=Be₃(OH) ₂ ⁴⁺ +2H⁺. Except for very dilute solutions, the predicted flow of sulfuric acid is small compared to the flow of beryllium sulfate because most of the beryllium ions are protected from hydrolysis by the formation of BeSO₄ ion pairs, and most of the hydrogen ions produced by hydrolysis are converted to less-mobile bisulfate ions.     

Determination of citric acid by means of competitive complex formation in a flow injection system

A photometric method for the determination of citrate and other organic acids based on their ability to complex Fe³⁺-ions is presented. The red colored complex of [Fe(SCN)₂]⁺, used as reagent, is destroyed upon contact with the sample because the organic acid complexes the Fe³⁺-ion. The decrease in absorption is monitored at 460 nm. The reaction is carried out in a simple flow injection system either in single or preferably double channel configuration.The influence of pH was investigated. Best results were obtained by adjusting the carrier stream to pH 2.0–2.5 with a KCl/HCl-buffer. With an increasing concentration of reagent the linear range is shifted to higher citrate concentrations. The slope of the calibration graph and the linear range are influenced by the sample volume. Other variations of parameters include flow rate, reactor volume and diameter of tubing. Generally speaking, optimum conditions for the flow system are not specified because they vary with the application.The typical conditions for a calibration graph from 1 to 8 mmol/l citrate were a reagent concentration of 2.6 mmol/l [Fe(SCN)₂]⁺, a flow rate of 2.4 ml/ min, a reactor length of 50 cm with tubing of 0.97 mm inner diameter and a sample volume of 100 l. At these system settings the coefficients of variation were 2.5% and 1.6% for eight replicate measurements of samples containing 4 mmol/l and 8 mmol/l citrate, respectively. Up to 180 samples can be analyzed per hour.Naturally the method is disturbed by all other ions that form complexes or precipitates with Fe³⁺-ions. Therefore its application is limited to samples with a known matrix, which was given in the analysis of citrate in lemon flavored soft drinks, where the citric acid usually accounts for 95 to 99% of the total acidity and other interfering ions are absent.     

Chemiluminescence initiated by complex formation in solutions of 1,2-dioxetane and lanthanide perchlorates

The spectral and activation parameters of chemiluminescence in the thermal decay of 1,2-dioxetane based on adamantylideneadamantane in acetonitrile in the presence of Tb^III, Eu^III, Pr^III, Ce^III, and Gd^III perchlorates and UO₂(NO₃)₂ have been studied. Two types of catalysis by metals, luminescent and nonluminescent, can be distinguished in the framework of one mechanism of dioxetane decay initiated by metal-peroxide complex formation. The mode of catalysis depends both on the presence of suitable energy levels in the metal ion to which the intracomplex transfer of excitation from the³n,^*-state of the ketone that appears in the decay of dioxetane in a catalytic complex can occur and on the ratio of the quantum yields of luminescence of the ketone and the metal ion that is the catalytic activator of luminescence.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1588–1592, September, 1994.The authors are grateful to S. S. Ostakhov for measuring the spectra and the duration of photoluminescence of terbium in dioxetane solutions and for participation in discussions of the results.     

On the flocculation and re-dissolution of trivalent lanthanide metal ions by sodium dodecyl sulfate in aqueous solutions

The interaction between aqueous solutions of trivalent lanthanide ions (M(3+): La(III) and Gd(III) and Tb (III)) at fixed (1mM) concentrations and various concentrations of sodium dodecyl sulfate (SDS), ranging from pre- to post-micellar, has been investigated by ICP-AES (La(III) and Gd(III)), luminescence spectra (Gd(III)) and lifetimes (Tb(III)) and (139)La NMR spectroscopy. It has been found that at concentration ratios, r=[SDS]/[M(3+)], around the charge neutralization value (ca. 3), dodecyl sulfate (DS(-)) anion interacts with the metal ions to form insoluble aggregates. The metal ion-DS(-) complexes remain flocculated for r values below 5-6 (Gd(III) and La(III), respectively), while at higher r values, re-dissolution takes place. The flocculated aggregates have been characterized by X-ray powder diffraction, and show a lamellar structure. Job plot method indicates that a complex with a 1:3 (M(3+):DS(-)) stoichiometry is formed. From ICP-AES analysis, a model based on a three-step mechanism has been developed and association constants calculated. For all systems the interaction between DS(-) and metal ions follows an associative process with K values ranging between K(1)=10 and K(3)=10(4). These data are discussed on the basis of the physical-chemical characteristics of the metal ions. Re-dissolution with increasing surfactant concentration is attributed to formation of mixed lanthanide/sodium dodecyl sulfate aggregates, with the relative lanthanide fraction in these species decreasing with increasing SDS concentration.     

Conductance behavior of some tris(ethylenediamine)cobalt(III) complexes and their ion association in aqueous solutions

The conductance behavior of some tris(ethylenediamine)cobalt(III) complexes was studied in dilute aqueous solutions at 25°C to investigate the ion-pair formation. The thermodynamic formation constants of the ion pairs [Co(en)₃]³⁺·X^– are 28 (chloride), 28 (bromide), 19 (nitrate), and 15 (perchlorate). These values were compared with theoretical values calculated by using Bjerrum's theory of ion association. The formation constant of [Co(en)₃]³⁺·Cl^– was larger than that obtained from the spectrophotometric measurement in solutions containing perchlorate ion. This difference in the formation constants was explained by considering the contribution of ion association of the complex cation with perchlorate ion.     

Acid-base interactions and complex formation while recovering copper(II) ions from aqueous solutions using cellulose adsorbent in the presence of polyvinylpyrrolidone

The sorption properties of nontreated cotton cellulose and cellulose modified with polyvinylpyrrolidone with respect to copper(II) ions are investigated. It is established that modified cellulose adsorbents have high sorption capability associated with the formation of new sorption centers during treatment with nitrogen-containing polymer. A mechanism is proposed for acid-base interactions in aqueous solutions of acids, bases, and salts during copper(II) cation recovery using cellulose adsorbent with the participation of polyvinylpyrrolidone.     

Ionic interactions in solutions. II. The theoretical basis of the equilibrium between free and pairwise associated ions

It is shown from recent results based on the statistical mechanics treatment of ionic solutions that the notion of an equilibrium between free ions and paired ions which wasa priori introduced in the chemical model of Bjerrum is essentially correct. The mass-action law which is deduced from such a model is indeed derivable from the more exact treatments of Mayer, Rasaiah, and Friedman starting directly from Hamiltonian models and without any assumptions as to the chemical structure of the ionic solute in the solution. The transformation relation from a primitive-model result to any short-range Hamiltonian model equation is given. It allows a simple mathematical treatment of experimental data for dilute solutions, the derivation of useful information on the Gurney solvation effects, and an interpretation of the multistep association concept.     

Copper(II) catalyses the reduction of perchlorate by both formaldehyde and by dihydrogen in aqueous solutions

Abstract

During an effort to synthesize the trans-III-copper(II) complex with 1,4,8,11-tetramethyl-pyro-phosphonate-1,4,8,11-tetra-aza-cyclo-tetradecane, using only perchlorate salts, it was noted that the perchlorate is reduced to chloride. Analysis of the reactions leading to this surprising result points out that Cu(H₂O)₄²⁺ catalyzes the reduction of perchlorate by H₂ and by CH₂O. These reactions are slow at room temperature and ambient pressures. A plausible mechanism, supported by DFT calculations, is proposed pointing out that the role of CuH⁺ under mild conditions cannot be ignored.     

Thermodynamics of surfactant-dye complex formation in aqueous solutions. Sodium alkyl sulfates and azo oil dye systems

Thermodynamics of surfactant-dye complex formation have been studied, in terms of equilibrium coefficient, using a spectrophotometer. The systems are 6 sodium alkyl sulfates, which have different alkyl chain lengths, and 4-phenylazo-1-naphthylamine. A pronounced spectral change in the dye solution occurs on addition of the surfactant; the change has a definite isosbestic point and a new absorption band at 535 nm because of surfactant-dye complex formation, which is caused by hydrophilic-hydrophilic interaction. As the alkyl chain length in the surfactant increases, the values of free energy change (negative) increase, while the value of enthalpy change (negative) increases and the value of entropy change (positive) decreases. The longer the alkyl chain length in surfactant increase, the more stable the surfactant-dye complex becomes.Surfactant-dye complex will form due to hydrophilic-hydrophilic interaction and will become more stable due to hydrophobic-hydrophobic interaction.     

Determination of the heterogeneous association constants of metal ions to omega-mercaptoalkanoic acids by using double-layer capacity measurements.

The binding of metal ions to ligands in homogeneous solutions and that to the same ligands anchored to metallic surfaces through self-assembled monolayers (SAMs) are expected to differ primarily due to the difference in the degree of freedom of the ligands and the surface potential. We studied the heterogeneous binding of CdII ions to omega-mercaptoalkanoic-acid SAMs on Au. This was accomplished by adding metal ions at a constant pH and following the changes in the double-layer capacity. A mathematical treatment, which is based on calculating the electrochemical-potential differences at the double layer-solution interface, has been developed. Our approach follows that proposed by White et al. and Kakiuchi, who used the acid-base equilibrium at the monolayer-electrolyte interface as a means of calculating the pK of ionizable SAMs. Experimentally, SAMs of omega-mercaptoalkanoic acids, HS(CH2)nCO2H, with different chain lengths (i.e., n=2, 5, and 10) in 0.1 M sodium perchlorate were assembled on Au surfaces and studied. The capacity was measured first in the absence of CdII at different pH values, and then at a constant pH while increasing the concentration of CdII in the solution. We found that the interfacial capacity decreased as the concentration (of either protons or CdII) increased. The results matched the model fairly well, which allowed the extraction of the thermodynamic equilibrium constant that is established at the monolayer-electrolyte interface. The suggested mathematical treatment of this model system is simple and yet very useful for estimating the heterogeneous association constants of metal ions by SAMs.     

Electric dipole moments in polar solvents. II. Tetraisoamylammonium nitrate ion pairs in chlorobenzene. Effect of mutual polarization of the ions

The dielectric constant and conductivity of dilute solutions of tetraisoamylammonium nitrate in chlorobenzene are measured between –34.6° and 99.0°C to give association constants for the formation of ion pairs (K _A) and triple ions, and electric dipole moments. The quantityK _A as a function of temperature is reproduced by the Denison-Ramsey-Fuoss treatment for unolarized ion pairs [Eq. (2)] with a distance of closest approach of 4.90 Å. The dielectric data are reproduced by Onsager's equation with an inherent (gas-phase) dipole moment of the ion pairs of 14.2±0.3 D. Other methods of calculation lead to consistent dipole moments, confirming that the mutual polarization of the ions is important. The energetics of ionic association is considered on the basis that the ion pair may be treated as a polarizable dipole in a spherical cavity.     

Determination of the formation constant for the inclusion complex between Lanthanide ions and Dansyl chloride derivative by fluorescence spectroscopy: Theoretical and experimental investigation

In this paper, a sensitive, easy, efficient, and suitable method for the calculation of K_f values of complexation between one derivative of Dansyl chloride [5-(dimethylamino) naphthalene-1-sulfonyl 4-phenylsemicarbazide] (DMNP) and Lanthanide(III) (Ln) ions is proposed, using both spectrofluorometric and spectrophotometric methods. Determination of K_f showed that DMNP was mostly selective towards the erbium (III) ion. The validity of the method was also confirmed calculating the Stern–Volmer fluorescence quenching constants (K_sv) that resulted in the same consequence, obtained by calculating the K_f of complexation values. In addition, the UV–vis spectroscopy was applied for the determination of K_f only for the Ln ions that had interactions with DMNP. Finally, the DFT studies were done on Er³⁺ and the DMNP complex for distinguishing the active sites and estimating the pair wise interaction energy. It can be concluded that this derivative of Dansyl chloride with inherent high fluorescence intensity is a suitable reagent for the selective determination of the Er³⁺ ion which can be used in constructing selective Er³⁺ sensors.