Study of the Interface Microstructures of CVD Diamond Films by TEM

 The characteristics of the interface microstructures between a CVD diamond film and the silicon substrate have been studied by transmission electron microscopy and electron energy loss spectroscopy. The investigations are performed on plan-view TEM specimens which were intentionally thinned only from the film surface side allowing the overall microstructural features of the interface to be studied. A prominent interfacial layer with amorphous-like features has been directly observed for CVD diamond films that shows a highly twinned defective diamond surface morphology. Similar interfacial layers have also been observed on films with a <100> growth texture but having the {100} crystal faces randomly oriented on the silicon substrate. These interfacial layers have been unambiguously identified as diamond phase carbon by both electron diffraction and electron energy loss spectroscopy. For the CVD diamond films that exhibit heteroepitaxial growth features, with the {100} crystal faces aligned crystallographically on the silicon substrate, such an interfacial layer was not observed. This is consistent with the expectation that the epitaxial growth of CVD diamond films requires diamond crystals to directly nucleate and grow on the substrate surface or on an epitaxial interface layer that has a small lattice misfit to both the substrate and the thin film material.     

Surface composition of Pt25Ni75(111) investigated by ISS and STM

Summary Ion scattering spectroscopy results show Pt enrichment in the topmost atomic layers of a Pt₂₅Ni₇₅(111) single crystal due to preferential sputtering. The increased lattice constant caused thereby leads to subsurface lattice mismatch dislocations, which have been studied by scanning tunneling microscopy. Agreement is found for the Pt concentration estimated from the density of dislocations and the results obtained by ISS. Thermal annealing induces further segregation of Pt in the topmost atomic layer. The composition of the subsurface layers has been studied and a strong dependence on the annealing temperature has been found. The observed Pt enrichment in the first monolayer for the thermodynamic equilibrium state agrees well with a thermodynamic theory.     

TEM investigation of nanophase aluminum powder.

Nanophase aluminum powder was characterized in a field-emission-gun transmission electron microscope (TEM). Different techniques were used to investigate the structure of the particles, including conventional bright-field and dark-field imaging, scanning transmission electron microscopy (STEM), high-resolution lattice imaging, diffraction studies, energy dispersive X-ray spectroscopy (EDS) analysis and mapping, and electron energy loss spectroscopy (EELS) analysis and mapping. It has been established that the particle cores consist of aluminum single crystals that sometimes contain crystal lattice defects. The core is covered by a passivating layer of aluminum oxide a few nanometers thick. The alumina is mostly amorphous, but evidences of partial crystallinity of the oxide were also found. The thickness of this layer was measured using different techniques, and the results are in good agreement with each other. The particles are agglomerated in two distinct ways. Some particles were apparently bonded together during processing before oxidation. These mostly form dumbbells covered by a joint oxide layer. Also, oxidized particles are loosely assembled into relatively large clusters.     

Semiconductor properties of nanocrystalline diamond electrodes

The semiconductor properties of nitrogenated nanocrystalline diamond electrodes and their corrosion transformations caused by electrochemical experiment in indifferent electrolyte (1 M K₂SO₄) were studied by the electrochemical impedance spectroscopy method. It was shown that after electrochemical measurements a narrow diamond peak at 1335.7 cm^?1 appears in the Raman spectrum; formerly the peak was hidden at a background of the intense signal inherent to graphite-like carbon. It was suggested that the corrosion damage caused by the exposure to electrochemical experiment resulted in a decrease of relative amount of nondiamond (graphite-like) carbon in the subsurface layer in the nanocrystalline diamond. By using Mott-Schottky plots, the nanocrystalline diamond was shown having n-type conductance. Within the bounds of the “effective medium” approach, the nanocrystalline diamond’s flat-band potential in aqueous solution and the noncompensated donor apparent concentration were estimated.     

Alkene/diamond liquid/solid interface characterization using internal photoemission spectroscopy

The photochemical attachment of 10-amino-dec-1-ene molecules protected with a trifluoroacetic acid group (TFAAD) on hydrogen-terminated single-crystalline chemical vapor deposited (CVD) diamond is characterized by total photoyield spectroscopy (TPYS), conductivity, Hall-effect, spectrally resolved photoconductivity (SPC), optical transmission experiments, and, for the first time, by in situ internal photoemission (IPE) spectroscopy applied in the spectral regime from 4 to 6 eV on the alkene/diamond (liquid/solid) heterostructures. These experiments are performed on undoped, (100) oriented, single-crystalline CVD diamond films, which contain no grain boundaries and have negligible bulk and surface defect densities. X-ray photoelectron spectroscopy (XPS) is used to investigate the chemical bonding of alkene molecules to diamond. The spectroscopic set of data shows that the photochemical reaction window of H-terminated diamond is shifted below the optical gap of diamond because of the negative electron affinity. In situ IPE experiments reveal electron emission between 4.5 and 5.2 eV. A model is introduced and discussed in which valence-band electrons are optically excited into empty hydrogen-induced surface states of diamond from where they tunnel into empty pi states of alkene molecules. We theoretically discuss the fastest attachment time to achieve a saturated TFAAD layer of about 2 x 10(14) cm(-)(2) on diamond, which is experimentally detected to be 7 h. In the case of direct optical electron excitations from diamond, the bonding efficiency will be one TFAAD molecule attachment arising from about 1600 emitted electrons.     

Effect of 120 MeV Au9+ ion irradiation on the structure and surface morphology of ZnO/NiO heterojunction

ZnO/NiO thin films, each of thickness 100 nm, were deposited on Si(100) substrate by pulsed laser deposition method. The resulting heterojunction, ZnO/NiO/Si, was irradiated by 120 MeV Au⁹⁺ ions and characterized by grazing incidence X‐ray diffraction (GIXRD), Raman spectroscopy, and atomic force microscopy (AFM). The GIXRD confirmed the presence of both NiO and ZnO in the samples. Ion irradiation induced suppression of crystalline nature, and the recrystallization of the same occurred at the fluence of 1 × 10¹³ ions cm⁻². The occurrence of most intense band at 302 cm⁻¹ in Raman spectra corresponds to the symmetric stretching vibration of ZnO. The linear shift of stretching mode of ZnO with ion fluence could be associated with the effect of compressive stress in the material. AFM analysis of the films indicated that the rms roughness increased when the film is irradiated at a fluence of 1 × 10¹² ions cm⁻². Beyond this fluence, the value of roughness decreased up to fluence of 1 × 10¹³ ions cm⁻² and increased thereafter. To see the effect of the stress of buffer layer on the surface layer, we calculated the stress for NiO layer with ion fluence form the lattice parameter. Comparing the stress of buffer layer with roughness of surface layer at the given fluence, we can say that the compressive stress in the buffer layer could possibly control the roughness of the surface layer.     

Formation and Depth Profiling Analysis of Multilayers Derived from Sol-Gel Processing Using Dynamic SIMS, RBS, and TEM

Silica sol-gel single layer AR coatings are used in high peak power pulsed lasers due to their high laser induced damage threshold (LIDT) and their low refractive index (1.22). We have used sol-gel processing to spin and dip coat multilayers of alternating high index (zirconia/hafnia) and low index (base catalysed silica) sol-gels on to fused silica substrates. When tailored at the correct thickness these stacks have shown >95% reflectivity at 355 nm and normal incidence whilst retaining a high LIDT. Depth profiling using Dynamic Secondary Ion Mass Spectrometry (DSIMS) and Rutherford back scattering (RBS) through these multilayer coatings has revealed the effect of increasing the number of layers in the stack. Results are presented for both spin and dip coated multilayers and a significant difference in the interfacial boundary is seen between the two coating processes. These differences are related to changes in the LIDT of the coatings. Individual layer thicknesses were estimated using this technique and compared to values gained from UV-Visible spectroscopy. TEM analysis of an ion-milled cross-section of the multilayers was performed showing the colloidal silica coatings and the depth of interpenetration of the interfaces.     

Replica multichannel polymer chips with a network of sacrificial channels sealed by adhesive printing method

Replica microchips for capillary array electrophoresis containing 10 separation channels (50 microm width, 50 microm depth and 100 microm pitch) and a network of sacrificial channels (100 microm width and 50 microm depth) were successfully fabricated on a poly(methyl methacrylate) (PMMA) substrate by injection molding. The strategy involved development of moving mask deep X-ray lithography to fabricate an array of channels with inclined channel sidewalls. A slight inclination of channel sidewalls, which can not be fabricated by conventional deep X-ray lithography, is highly required to ensure the release of replicated polymer chips from a mold. Moreover, the sealing of molded PMMA multichannel chips with a PMMA cover film was achieved by a novel bonding technique involving adhesive printing and a network of sacrificial channels. An adhesive printing process enables us to precisely control the thickness of an adhesive layer, and a network of sacrificial channels makes it possible to remove air bubbles and an excess adhesive, which are crucial to achieving perfect sealing of replica PMMA chips with well-defined channel and injection structures. A CCD camera equipped with an image intensifier was used to simultaneously monitor electrophoretic separations in ten micro-channels with laser-induced fluorescence detection. High-speed and high-throughput separations of a 100 bp DNA ladder and phi X174 Hae III DNA restriction fragments have been demonstrated using a 10-channel PMMA chip. The current work establishes the feasibility of mass production of PMMA multichannel chips at a cost-effective basis.     

Size effect in the titanium/diamond‐like carbon bilayer films: effect of relative thickness on their structure and mechanical properties

Titanium/diamond‐like carbon (Ti/DLC) bilayer films with different relative thickness were fabricated by direct‐current and pulsed cathode arc plasma method. Microstructure, morphological characteristics, and mechanical properties of the films were investigated in dependence of the thickness of Ti and DLC layers by Raman spectroscopy, atomic force microscopy, Knoop sclerometer, and surface profilometer. Raman spectra of Ti/DLC bilayers show the microstructure evolution (the size and ordering degree of sp²‐hybridized carbon clusters) with varying the thicknesses of Ti interlayer and DLC layer. Nano‐scaled Ti interlayer of 12–20 nm thickness presents the largest size effect. The catalytic effect of the sublayer is most pronounced in the carbon layer of less than 106 nm. In these thickness ranges, the bilayer films possessed the highest micro‐hardness and reactivity between atoms at interface. Internal stress in the bilayer monotonically decreases, with the thickness of Ti interlayer increasing to 30 nm and then becomes stable with the thickness. These results are associated with the occurrence of atomic diffusion process at Ti/C interface, and they are of cardinal significance to optimize the structure and mechanical properties of carbon‐based multilayer films. Copyright © 2016 John Wiley & Sons, Ltd.     

Properties of hybridized DNA arrays on single-crystalline undoped and boron-doped (100) diamonds studied by atomic force microscopy in electrolytes

Properties of hybridized deoxyribonucleic acid (DNA) arrays on single-crystalline undoped and boron-doped diamonds are studied at the microscopic level by atomic force microscopy (AFM) in buffered electrolytic solutions. DNA is linked to diamond via aminodecene molecules (TFAAD) that are attached to undoped diamonds by a photochemical reaction and via nitrophenyl-diazonium molecules attached electrochemically to boron-doped diamonds. Both H-terminated and oxidized diamond surfaces are used in this process. On H-terminated surfaces, AFM measurements detect compact DNA layers. By analyzing phase and height contrast in AFM, a DNA layer height of 76 A is determined on the photochemically functionalized diamonds and a DNA layer height of up to 92 A is determined on the electrochemically functionalized diamonds. Based on the layer thickness, the DNA chains are tilted under the angle of 31 degrees . The morphology of the DNA layers exhibits long-range (30-50 nm) undulations of 20 A in height and a nanoroughness of 8 A. Using Hertz's model for calculating the contact area of the AFM tip on a DNA layer and a geometrical model of DNA arrangement on diamond yields the DNA density on diamonds of 6 x 10(12) cm(-2) on both photochemically and electrochemically functionalized diamonds. The structure of these dense DNA layers is not significantly influenced by variations in buffer salinity of 1-300 mM NaCl. DNA molecules can be removed from the diamond surface by contact-mode AFM with forces >or= 45 nN and >or= 76 nN on photochemically and electrochemically functionalized diamonds, respectively, indicating that DNA is bonded covalently and stronger on diamond than on gold substrates. The DNA arrangement and bonding strength are similar on oxidized diamond surfaces when using an electrochemical process. On oxidized surfaces after photochemical processing, DNA is bonded noncovalently as deduced from the removal force < 6 nN. The presence of hybridized DNA as well as the selective removal of DNA by AFM scanning are corroborated by fluorescence microscopy.     

The diamond/aqueous electrolyte interface: an impedance investigation

We have investigated the electrochemical interface between diamond electrodes and aqueous electrolytes using electrochemical techniques such as cyclic voltammetry and ac impedance spectroscopy. High-quality CVD-grown boron-doped polycrystalline diamond electrodes and IIa single crystalline natural diamond electrodes have been used in this study. In the case of hydrogen-terminated diamond electrodes, the electrochemical interface is dominated by the electrochemical double layer. Frequency-dependent impedance spectroscopy reveals a potential regime in which the contribution of ion adsorption becomes relevant. We have conducted experiments to evaluate the effect of pH and ionic strength on the double layer. Our results suggest that only ions resulting from water auto-dissociation, i.e., hydroxide and hydronium ions, are responsible for ion adsorption and, thus, able to modify the charge at the double layer. In contrast, no effect of the adsorption of several dissolved ions (such as Na+, K+, Cl-) has been observed On the basis of the electrochemical characterization of H-terminated diamond surfaces, we also discuss the phenomenon of the surface conductivity in diamond, as well as the pH sensitivity of the diamond surface. The influence of the O2/OH- and H2/H3O+ redox couples on the origin of the surface conductivity is discussed.     

Loop entanglement of semicrystalline polyethylene in amorphous region: Diamond lattice approach

Linear polyethylenes in the amorphous region have been simulated as restricted random walks on a diamond lattice between two absorbing planes. The links among loops were studied by treating loops as oriented curves. The local conformations of polyethylene chains (i.e., trans and gauche energy differences) were considered in the simulation, thereby determining the effect of crystallization temperature on the loop entanglement. It was found that the total Gauss winding and link density of linked loops increased with the thickness of the amorphous region. This result agrees with that of the cubic lattice model. The link probability decreases very slowly with the thickness of the amorphous region. On the other hand, the results presented clearly indicate that all statistical measures of linked loops decrease with temperature. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 348–353, 1999     

Direct electrical detection of antigen-antibody binding on diamond and silicon substrates using electrical impedance spectroscopy

The integration of biological molecules with semiconducting materials such as silicon and diamond has great potential for the development of new types of bioelectronic devices, such as biosensors and bioactuators. We have investigated the electrical properties of the antibody-antigen modified diamond and silicon surfaces using electrical impedance spectroscopy (EIS). Frequency dependent measurements at the open-circuit potential show: (a) significant changes in impedance at frequency >10(4) Hz when the surface immobilized IgG was exposed to anti-IgG, and (b) only little or no change when exposed to anti-IgM. Mott-Schottky measurements at high frequency (200 kHz) show that the impedance is dominated by the space charge layer of the semiconducting substrates. Silicon surfaces modified in a similar manner to the diamond surface are compared; n-type and p-type samples show complementary behavior, as expected for a field effect. We also show it is possible to directly observe antigen-antibody interaction at a fixed frequency in real time, and with no additional labeling.     

Functionalized diamond nanopowder for phosphopeptides enrichment from complex biological fluids

Diamond is known for its high affinity and biocompatibility towards biomolecules and is used exclusively in separation sciences and life science research. In present study, diamond nanopowder is derivatized as Immobilized Metal Ion Affinity Chromatographic (IMAC) material for the phosphopeptides enrichment and as Reversed Phase (C-18) media for the desalting of complex mixtures and human serum profiling through MALDI-TOF-MS. Functionalized diamond nanopowder is characterized by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy. Diamond-IMAC is applied to the standard protein (β-casein), spiked human serum, egg yolk and non-fat milk for the phosphopeptides enrichment. Results show the selectivity of synthesized IMAC-diamond immobilized with Fe³⁺ and La³⁺ ions. To comprehend the elaborated use, diamond-IMAC is also applied to the serum samples from gall bladder carcinoma for the potential biomarkers. Database search is carried out by the Mascot program (www.matrixscience.com) for the assignment of phosphorylation sites. Diamond nanopowder is thus a separation media with multifunctional use and can be applied to cancer protein profiling for the diagnosis and biomarker identification.     

Enhancing Fluorescence of Shallow Nitrogen-Vacancy Centers in Diamond by Surface Coating with Titanium Oxide Layers

We present an enhancement of the fluorescence of shallow (<10 nm) nitrogen-vacancy (NV^-) centers by using atomic layer deposition to deposit titanium oxide layers on the diamond surface. In this way, the shallow NV^- center charge states were stabilized, leading to the increasing fluorescence intensity of about 2 times. This surface coating technique could produce a protective layer of controllable thickness without any damages to the solid-state quantum system surface, which might be an approach to the further passivation or packaging techniques for the solid-state quantum devices.     

Scanning Probe Microscopy and Spectroscopy of CVD Diamond Films

 The surface morphology and electronic properties of as-deposited CVD diamond films and the diamond films which have been subjected to boron ion implantation or hydrogen plasma etching have been systematically studied by high resolution scanning probe microscopy and spectroscopy techniques. AFM and STM image observations have shown that (a) both the as-deposited CVD diamond films and the boron ion implanted films exhibit similar hillock morphologies on (100) crystal faces and these surface features are formed during the deposition process; (b) boron ion implantation does not cause a discernible increase in surface roughness; (c) atomic flatness can be achieved on crystal faces by hydrogen plasma etching of the film surface. Scanning tunnelling spectroscopy analysis has indicated that (a) the as-deposited diamond films and the hydrogen plasma etched diamond films possess typical p-type semiconductor surface electronic properties; (b) the as-deposited diamond films subjected to boron implantation exhibit surface electronic properties which change from p-type semiconducting behaviour to metallic behaviour; (c) the damage in the boron implanted diamond films is restricted to the surface layers since the electronic properties revert to p-type on depth profiling.     

Gold hollow nanospheres: tunable surface plasmon resonance controlled by interior-cavity sizes

Uniform gold hollow nanospheres with tunable interior-cavity sizes were fabricated by using Co nanoparticles as sacrificial templates and varying the stoichiometric ratio of starting material HAuCl4 over the reductants. The formation of these hollow nanostructures is attributed to two subsequent reduction reactions: the initial reduction of HAuCl4 by Co nanoparticles, followed by the reduction by NaBH4. In addition, a thick layer of silica was successfully coated onto the gold hollow nanospheres. These nanostructures are extensively characterized by TEM, XRD, HRTEM, SEM, electron diffraction, energy-dispersive X-ray analysis, and UV-visible absorption spectroscopy. It is evident that the SPR peak locations corresponding to these hollow nanospheres are shifted over a region of more than 100 nm wavelength due to changes of shell thickness, which make these optically active nanostructures of great interest in both fundamental research and practical applications.     

Rapid sacrificial layer etching for the fabrication of nanochannels with integrated metal electrodes

We present a rapid etch method to surface-micromachine nanochannels with integrated noble metal electrodes using a single metal sacrificial layer. The method is based on the galvanic coupling of a chromium sacrificial layer with gold electrodes, which results in a 10-fold increase in etch rate with respect to conventional single metal etching. The etch process is investigated and characterized by optical and electrochemical measurements, leading to a theoretical explanation of the observed etch rate based on mass transport. Using this explanation we derive some generic design rules for nanochannel fabrication employing sacrificial metal etching.     

Thermally induced alkylation of diamond

We present an approach for the thermally activated formation of alkene-derived self-assembled monolayers on oxygen-terminated single and polycrystalline diamond surfaces. Chemical modification of the oxygen and hydrogen plasma-treated samples was achieved by heating in 1-octadecene. The resulting layers were characterized using X-ray photoelectron spectroscopy, thermal desorption spectroscopy, atomic force microscopy, Fourier transform infrared spectroscopy, and water contact angle measurements. This investigation reveals that alkenes selectively attach to the oxygen-terminated sites via covalent C-O-C bonds. The hydrophilic oxygen-terminated diamond is rendered strongly hydrophobic following this reaction. The nature of the process limits the organic layer growth to a single monolayer, and FTIR measurements reveal that such monolayers are dense and well ordered. In contrast, hydrogen-terminated diamond sites remain unaffected by this process. This method is thus complementary to the UV-initiated reaction of alkenes with diamond, which exhibits the opposite reactivity contrast. Thermal alkylation increases the range of available diamond functionalization strategies and provides a means of straightforwardly forming single organic layers in order to engineer the surface properties of diamond.     

Interfacial electrical properties of DNA-modified diamond thin films: intrinsic response and hybridization-induced field effects

We have investigated the frequency-dependent interfacial electrical properties of nanocrystalline diamond films that were covalently linked to DNA oligonucleotides and how these properties are changed upon exposure to complementary and noncomplementary DNA oligonucleotides. Frequency-dependent electrical measurements at the open-circuit potential show significant changes in impedance at frequencies of >10(4) Hz when DNA-modified diamond films are exposed to complementary DNA, with only minimal changes when exposed to noncomplementary DNA molecules. Measurements as a function of potential show that at 10(5) Hz, the impedance is dominated by the space-charge region of the diamond film. DNA molecules hybridizing at the interface induce a field effect in the diamond space-charge layer, altering the impedance of the diamond film. By identifying a range of impedances where the impedance is dominated by the diamond space-charge layer, we show that it possible to directly observe DNA hybridization, in real time and without additional labels, via simple measurement of the interfacial impedance.