Structural and spectroscopic evidence for the formation of trinuclear and tetranuclear vanadium(III)/carboxylate complexes of acetate and related derivatives in aqueous solution

The formation of vanadium(III) complexes with nuclearity greater than two is believed to occur in aqueous solution on the basis of potentiometric, electrochemical, and/or UV-vis spectroscopy titration measurements, although structural evidence for this is limited. Upon the addition of 1-2 equiv of acetate, propionate, chloroacetate, trifluoroacetate, or bromoacetate to an aqueous, acidic solution of vanadium(III), trinuclear and tetranuclear complexes are formed. The structures of [V4(mu-OH)4(mu-OOCCF3)4(OH2)8]Cl4.7.5H2O (1), [V4(mu-OH)4(mu-OOCCH3)4(OH2)8]Cl4.CH3COOH.12H2O (2), [V4(mu-OH)4(mu-OOCCH3)4(OH2)8]Cl4.3H2O (3), [V3(mu3-O)(mu-OOCCH2Br)6(OH2)3]CF3SO3.H2O (4), [V3(mu3-O)(mu-OOCCH2CH3)6(OH2)3]Cl.2H2O (5), [V3(mu3-O)(mu-OOCCH3)6(OH2)3]Cl.3.5H2O (6), and [V3(mu3-O)(mu-OOCCH2Cl)6(OH2)3]CF3SO3.H2O (7) have been determined by X-ray diffraction. Importantly, electrospray mass spectrometry and 1H NMR measurements suggest that these complexes are not purely solid-state phenomena but are also present in solution. For the vanadium(III)/acetate and vanadium(III)/propionate systems, two paramagnetic 1H NMR signals corresponding to two distinct complexes (species A and B) are observed in the 40-55 ppm region for 0.20 mol equiv of acetate or propionate, at pD 3.44. No corresponding signals are observed for the vanadium(III)/bromoacetate and vanadium(III)/chloroacetate systems under the same conditions or for the vanadium(III)/ trifluoroacetate system using 19F NMR spectroscopy. UV-vis spectra suggest that species B are structurally analogous for the vanadium(III)/acetate and vanadium(III)/propionate systems, whereas structurally different complexes are the major species for the other systems. Diffusion coefficients of species B for the vanadium(III)/acetate and vanadium(III)/propionate systems determined by pulsed-field-gradient spin-echo NMR spectroscopy measurements are (3.0 +/- 0.1) x 10-6 and (3.23 +/- 0.01) x 10-6 cm2 s-1, respectively, and are most consistent with species B being trimeric, rather than tetranuclear, complexes.     

Enthalpies of Reactions of Binuclear Molybdenum(III), (V), and (VI) Ethylenediaminetetracetate,Oxo, and Hydroxo Complexes in Aqueous Solutions

Enthalpies of consecutive stages of multistage transformations of binuclear molybdenum(III), (V), and (VI) ethylenediaminetetracetate, oxo, and hydroxo complexes in aqueous solutions were determined. Stabilization energies of cluster cores (energies of metal-metal bonds) were estimated for binuclear molybdenum complexes with acido ligands.     

The extraction of various metals as their anionic complexes with edta by solutions of aliquat-336 chloride in 1.2-dichloroethane

The extraction of anionic complexes of EDTA with Ca. Mg, V(IV), V(V), Cr(III), Mn(II), Mn(III), Fe(III), Co(II), Co(III), Ni, Cu(II), Zn, Cd, Hg(II), Pd(II), Pb and Bi by solutions of Aliquat-336 chloride in 1,2-dichloroethane has been studied as a function of the pH of the aqueous phase. The order and extent of the extractability varies greatly with the pH and provides a number of new possibilities for separation procedures. Thus iron(III) can be separated from many other metals in strongly alkaline solution while the extraction of V(V), V(IV), Hg(II) and Pd(II) exceeds 99% over wide pH ranges. The complex of Mn(III) with EDTA which is very unstable in aqueous solution can be preserved for up to 5 h when extracted by Aliquat-336.One of us (R. H. A1-J.) wishes to thank the Ministry of Oil of the Republic of Iraq for financial support.     

Adsorption of Inorganic and Organic Arsenic Compounds by Aluminium-loaded Coral Limestone

Coral limestones were treated with an aqueous solution of aluminium sulfate and thereby aluminium-loaded coral limestones (Al-CL) were prepared. By use of Al-CL as an adsorbent, the adsorption of inorganic arsenic compounds (arsenate [As(V)] and arsenite [As(III)] and of organic arsenic compounds (methylarsonic acid, dimethylarsinic acid, and arsenobetaine) was examined. The adsorption ability of Al-CL is superior to that of iron(III)-loaded coral limestone (Fe-CL) for As(V), As(III), methylarsonic acid and dimethylarsinic acid. The adsorption of As(V) and As(III) is almost independent of the initial pH over a wide range (2 or 3 to 11). The addition of other anions, such as chloride, nitrate, sulfate and acetate, in the solution does not affect the adsorption of As(V) and As(III), whereas the addition of phosphate greatly interferes with the adsorption. Arsenic adsorption is effectively applied to a column-type operation and the adsorption capability for As(V) is 150 μg/g coral limestone.     

Aqueous chemistry of the vanadium(III) (V(III)) and the V(III)-dipicolinate systems and a comparison of the effect of three oxidation states of vanadium compounds on diabetic hyperglycemia in rats

The aqueous vanadium(III) (V(III)) speciation chemistry of two dipicolinate-type complexes and the insulin-enhancing effects of V-dipicolinate (V-dipic) complexes in three different oxidation states (V(III), V(IV), and V(V)) have been studied in a chronic animal model system. The characterization of the V(III) species was carried out at low ionic strength to reflect physiological conditions and required an evaluation of the hydrolysis of V(III) at 0.20 M KCl. The aqueous V(III)-dipic and V(III)-dipic-OH systems were characterized, and complexes were observed from pH 2 to 7 at 0.2 M KCl. The V(III)-dipic system forms stable 1:2 complexes, whereas the V(III)-dipic-OH system forms stable 1:1 complexes. A comparison of these complexes with the V-pic system demonstrates that a second ligand has lower affinity for the V(III), presumably reflecting bidentate coordination of the second dipic(2)(-) to the V(III). The thermodynamic stability of the [V(III)(dipic)(2)](-) complex was compared to the stability of the corresponding V(IV) and V(V) complexes, and surprisingly, the V(III) complexes were found to be more stable than anticipated. Oral administration of three V-dipicolinate compounds in different oxidation states {H[V(III)(dipic)(2)H(2)O].3H(2)O, [V(IV)Odipic(H(2)O)(2)].2H(2)O, and NH(4)[V(V)O(2)dipic]} and the positive control, VOSO(4), significantly lowered diabetic hyperglycemia in rats with streptozotocin-induced diabetes. The diabetic animals treated with the V(III)- or V(IV)-dipic complexes had blood glucose levels that were statistically different from those of the diabetic group. The animals treated with the V(V)-dipic complex had the lowest blood glucose levels of the treated diabetic animals, which were statistically different from those of the diabetic group at all time points. Among the diabetic animals, complexation to dipic increased the serum levels of V after the administration of the V(V) and V(IV) complexes but not after the administration of the V(III) complex when data are normalized to the ingested dose of V. Because V compounds differing only in oxidation state have different biological properties, it is implied that redox processes must be important factors for the biological action of V compounds. We observe that the V(V)-dipic complex is the most effective insulin-enhancing agent, in contrast to previous studies in which the V(IV)-maltol complex is the most effective. We conclude that the effectiveness of complexed V is both ligand and oxidation state dependent.     

Mechanisms of Arsenic Adsorption on Amorphous Oxides Evaluated Using Macroscopic Measurements, Vibrational Spectroscopy, and Surface Complexation Modeling

Arsenic adsorption on amorphous aluminum and iron oxides was investigated as a function of solution pH, solution ionic strength, and redox state. In this study in situ Raman and Fourier transform infrared (FTIR) spectroscopic methods were combined with sorption techniques, electrophoretic mobility measurements, and surface complexation modeling to study the interaction of As(III) and As(V) with amorphous oxide surfaces. The speciation of As(III) and As(V) in aqueous solution was examined using Raman and attenuated total reflectance (ATR)-FTIR methods as a function of solution pH. The position of the As-O stretching bands, for both As(III) and As(V), are strongly pH dependent. Assignment of the observed As-O bands and their shift in position with pH was confirmed using semiempirical molecular orbital calculations. Similar pH-dependent frequency shifts are observed in the vibrational bands of As species sorbed on amorphous Al and Fe oxides. The mechanisms of As sorption to these surfaces based on the spectroscopic, sorption, and electrophoretic mobility measurements are as follows: arsenate forms inner-sphere surface complexes on both amorphous Al and Fe oxide while arsenite forms both inner- and outer-sphere surface complexes on amorphous Fe oxide and outer-sphere surface complexes on amorphous Al oxide. These surface configurations were used to constrain the input parameters of the surface complexation models. Inclusion of microscopic and macroscopic experimental results is a powerful technique that maximizes chemical significance of the modeling approach. Copyright 2001 Academic Press.     

Lanthanide dota-like complexes containing a picolinate pendant: structural entry for the design of Ln(III)-based luminescent probes

In this contribution we present two ligands based on a do3a platform containing a picolinate group attached to the fourth nitrogen atom of the cyclen unit, which are designed for stable lanthanide complexation in aqueous solutions. Potentiometric measurements reveal that the thermodynamic stability of the complexes is very high (log K = 21.2-23.5), being comparable to that of the dota analogues. Luminescence lifetime measurements performed on solutions of the Eu(III) and Tb(III) complexes indicate that the complexes are nine coordinate with no inner-sphere water molecules. A combination of density functional theory (DFT) calculations and NMR measurements shows that for the complexes of the heaviest lanthanides there is a major isomer in solution consisting of the enantiomeric pair Λ(δδδδ) and Δ(λλλλ), which provides square antiprismatic coordination (SAP) around the metal ion. Analysis of the Yb(III)-induced paramagnetic shifts unambiguously confirms that these complexes have SAP coordination in aqueous solution. For the light lanthanide ions however both the SAP and twisted-square antiprismatic (TSAP) isomers are present in solution. Inversion of the cyclen ring appears to be the rate-determining step for the Λ(δδδδ) ? Δ(λλλλ) enantiomerization process observed in the Lu(III) complexes. The energy barriers obtained from NMR measurements for this dynamic process are in excellent agreement with those predicted by DFT calculations. The energy barriers calculated for the arm-rotation process are considerably lower than those obtained for the ring-inversion path. Kinetic studies show that replacement of an acetate arm of dota by a picolinate pendant results in a 3-fold increase in the formation rate of the corresponding Eu(III) complexes and a significant increase of the rates of acid-catalyzed dissociation of the complexes. However, these rates are 1-2 orders of magnitude lower than those of do3a analogues, which shows that the complexes reported herein are remarkably inert with respect to metal ion dissociation.     

Dioxo-bridged dinuclear manganese(III) and -(IV) complexes of pyridyl donor tripod ligands: combined effects of steric substitution and chelate ring size variations on structural,spectroscopic, and electrochemical properties

The syntheses and structural, spectral, and electrochemical characterization of the dioxo-bridged dinuclear Mn(III) complexes [LMn(mo-O)(2)MnL](ClO(4))(2), of the tripodal ligands tris(6-methyl-2-pyridylmethyl)amine (L(1)) and bis(6-methyl-2-pyridylmethyl)(2-(2-pyridyl)ethyl)amine (L(2)), and the Mn(II) complex of bis(2-(2-pyridyl)ethyl)(6-methyl-2-pyridylmethyl)amine (L(3)) are described. Addition of aqueous H(2)O(2) to methanol solutions of the Mn(II) complexes of L(1) and L(2) produced green solutions in a fast reaction from which subsequently precipitated brown solids of the dioxo-bridged dinuclear complexes 1 and 2, respectively, which have the general formula [LMn(III)(mu-O)(2)Mn(III)L](ClO(4))(2). Addition of 30% aqueous H(2)O(2) to the methanol solution of the Mn(II) complex of L(3) ([Mn(II)L(3)(CH(3)CN)(H(2)O)](ClO(4))(2) (3)) showed a very sluggish change gradually precipitating an insoluble black gummy solid, but no dioxo-bridged manganese complex is produced. By contrast, the Mn(II) complex of the ligand bis(2-(2-pyridyl)ethyl)(2-pyridylmethyl)amine (L(3a)) has been reported to react with aqueous H(2)O(2) to form the dioxo-bridged Mn(III)Mn(IV) complex. In cyclic voltammetric experiments in acetonitrile solution, complex 1 shows two reversible peaks at E(1/2) = 0.87 and 1.70 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and the Mn(III)Mn(IV) <--> Mn(IV)(2) processes, respectively. Complex 2 also shows two reversible peaks, one at E(1/2) = 0.78 V and a second peak at E(1/2) = 1.58 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and Mn(III)Mn(IV) <--> Mn(IV)(2) redox processes, respectively. These potentials are the highest so far observed for the dioxo-bridged dinuclear manganese complexes of the type of tripodal ligands used here. The bulk electrolytic oxidation of complexes 1 and 2, at a controlled anodic potential of 1.98 V (vs Ag/AgCl), produced the green Mn(IV)(2) complexes that have been spectrally characterized. The Mn(II) complex of L(3) shows a quasi reversible peak at an anodic potential of E(p,a) of 1.96 V (vs Ag/AgCl) assigned to the oxidation Mn(II) to Mn(III) complex. It is about 0.17 V higher than the E(p,a) of the Mn(II) complex of L(3a). The higher oxidation potential is attributable to the steric effect of the methyl substituent at the 6-position of the pyridyl donor of L(3).     

Effect of aqueous acetic, oxalic, and carbonic acids on the adsorption of europium(III) onto alpha-alumina

Chemical retention, i.e., partition of the element between aqueous solution and mineral surface, is a key phenomenon for assessing the safety of possible nuclear waste disposal. For this purpose, the sorption of Eu(III) onto a model mineral-alpha-alumina-is studied here, including the effects of groundwater chemistry: pH and concentrations of small organic and inorganic ligands (acetate, oxalate, and carbonate anions). This work presents some experimental evidence for a synergic mechanism of sorption of europium-ligand complexes onto the alumina. Only cationic complexes were necessary to consider to model experimental results. Using the ion-exchange theory (IET) and a corresponding restricted set of parameters-exchange capacities and thermodynamic equilibrium constants-the whole set of sorption experiments of Eu(III) cationic species onto the alpha-alumina was modeled under various chemical conditions.     

Speciation analysis of inorganic Sb(III) and Sb(V) ions by using mini column filled with Amberlite XAD-8 resin

The speciation of inorganic Sb(III) and Sb(V) ions in aqueous solution was studied. The adsorption behavior of Sb(III) and Sb(V) ions were investigated as iodo and ammonium pyrollidine dithiocarbamate (APDC) complexes on a column filled with Amberlite XAD-8 resin. Sb(III) and Sb(V) ions were recovered quantitatively and simultaneously from a solution containing 0.8 M NaI and 0.2 M H₂SO₄ by the XAD-8 column. Sb(III) ions were also adsorbed quantitatively as an APDC complex, but the recovery of the Sb(V)-APDC complex was found to be <10% at pH 5. According to these data, the concentrations of total antimony as Sb(III)+Sb(V) ions and Sb(III) ion were determined with XAD-8/NaI+H₂SO₄ and XAD-8/APDC systems, respectively. The Sb(V) ion concentration was calculated by subtracting the Sb(III) concentration found with XAD-8/APDC system from the total antimony concentration found with XAD-8/NaI+H₂SO₄ system. The developed method was applied to determine Sb(III) and Sb(V) ions in samples of artificial seawater and wastewater.     

Racemic iron(III) and cobalt(III) complexes containing a new pentadentate "helmet" phthalocyaninato ligand

Solvothermal reactions of iron(II) acetate tetrahydrate and cobalt(II) acetate tetrahydrate with 1,2-dicyanobenzene in methanol solution result in the formation of racemic six-coordinate iron(III) and cobalt(III) complexes, respectively, with a new bicyclic pentadentate 14,28-[1,3-diiminoisoindolinato]phthalocyaninato ligand.     

Synthesis and properties of cobalt(III) complexes of 4-substituted pyridine-capped dioxocyclams

Cobalt(III) acetate and cyanide complexes of a series of 5,12-dioxocyclams capped across the 1,8-position by 4-substituted pyridines or pyrazine were synthesized and fully characterized. Both the spectroscopic and structural parameters for these complexes were remarkably insensitive to the electronic nature of the capping group, which ranged from the pi-accepting pyrazine group to the sigma-donating 4-[(dimethylamino)phenyl]pyridyl group. All of the complexes underwent an irreversible, one-electron reduction [Co(III)-->Co(II)] at potentials ranging from -0.95 V vs saturated calomel electrode (SCE) for the pyrazine-capped cobalt acetate complex to -1.36 V vs SCE for the pyridine-capped cobalt cyanide complexes. Pyridine-capped cobalt(III) cyanide complex underwent reaction with Rh2(OAc)4 and ruthenium(II) phthalocyanine[bis(benzonitrile)] to form tetrametallic and trimetallic complexes through coordination bridging by the cyanide nitrogen lone pair. These complexes represent two quite different structural types for cyanide-bridged polymetallics. Complex has a relatively long (2.192 A) cyanide N-to-Rh bond, and the CN-Rh bond angle (157.6 degrees) is strongly distorted from linear. In contrast, complex has a substantially shortened cyanide N-to-Ru bond (2.017 A) and an almost linear arrangement along the entire bridging axis of the molecule.     

Thermodynamic Analysis of Cerium(III) Extraction from Sulfate Solutions with Salts of Quaternary Ammonium Bases

Cerium(III) distribution between an aqueous sulfate solution and a solution of trialkylbenzylammonium sulfate in xylene was studied. The Ce(III) distribution coefficient grows with increasing pH. The extraction is provided by the formation of cerium mono- and disulfate complexes in the aqueous phase. Schemes of extraction equilibria are proposed and Gibbs energies and equilibrium constants are found.     

Synthesis hexagonal ß-Ni(OH)2 nanosheets for use in electrochemistry sensors

A new method for the determination of inorganic arsenic species (As(III) and As(V)) was developed by dispersive liquid-liquid microextraction (DLLME) separation and graphite furnace atomic absorption spectrometry (GFAAS) detection. In the pH range of 3–5, As(III) complexes with ammonium pyrrolidinedithiocarbamate (APDC) and then can be extracted into carbon tetrachloride droplets formed by injecting the binary solution of carbon tetrachloride (extraction solvent) and methanol (dispersive solvent) into the sample solution. As(V) is not extracted at the same pH conditions and remained in the aqueous phase. After extraction and phase separation by centrifugation, the enriched As(III) in the sedimented phase was determined by GFAAS. Total inorganic arsenic was determined after reduction of As(V) to As(III) with sodium thiosulfate and potassium iodide, and As(V) was calculated by difference. Under optimized conditions, the detection limits of this method for As(III) were 36 ng L^?1 with an enrichment factor of 45, and the relative standard deviation (R.S.D.%) was 3.1% (n?=?11, c?=?1.0 ng mL^?1). The method has been applied to the speciation of As(III) and As(V) in natural water samples with satisfactory results.     

Detection of Al(III) and Ga(III) complexes with morin by electrospray ionization mass spectrometry.

The Al(III) and Ga(III) complexes formed by morin (M) in aqueous solution were investigated by means of electrospray ionization mass spectrometry (ESI-MS). In the full scan mass spectra, Al:M showed 1:2 and 2:3 stoichiometric ratios. When (S)-N-acetylserine methyl ester (Ser), as a partial mimic of the serine residue in silk, was added to Al:M and Ga:M complexes in aqueous solution, the mass spectra of Ser:Al:M showed 1:1:1 and 1:1:2 stoichiometric ratios. The patterns of the mass spectra of Ga:M and Ser:Ga:M complexes were similar to those for the corresponding Al(III) complexes. Calculated heats of formation of potential structures of the complexes, with and without bound water, were obtained using semiempirical PM3 calculations.     

Cloud point extraction: an alternative to traditional liquid-liquid extraction for lanthanides(III) separation

Cloud point extraction (CPE) was used to extract and separate lanthanum(III) and gadolinium(III) nitrate from an aqueous solution. The methodology used is based on the formation of lanthanide(III)-8-hydroxyquinoline (8-HQ) complexes soluble in a micellar phase of non-ionic surfactant. The lanthanide(III) complexes are then extracted into the surfactant-rich phase at a temperature above the cloud point temperature (CPT). The structure of the non-ionic surfactant, and the chelating agent-metal molar ratio are identified as factors determining the extraction efficiency and selectivity. In an aqueous solution containing equimolar concentrations of La(III) and Gd(III), extraction efficiency for Gd(III) can reach 96% with a Gd(III)/La(III) selectivity higher than 30 using Triton X-114. Under those conditions, a Gd(III) decontamination factor of 50 is obtained.     

Stability quotients of neodymium acetate complexes from 20 to 70‡C by laser-induced photoacoustic spectroscopy

The formation of Nd(III) acetate complexes in aqueous solution is studied by laser-induced photoacoustic spectroscopy and spectrophotometry. Stability quotients for the complexes Nd(CH₃COO)²⁺ and Nd(CH₃COO)² and dissociation quotients for acetic acid are determined at 20, 35, 50 and 70‡C in NaClO₄ medium of ionic strength 2.2m (2.0M at 20‡C). The 20‡C results are consistent with previous values determined by potentiometry and energy transfer from Tb(III). The temperature dependence of the stability quotients is consistent with the measured enthalpies of reaction at 25‡C.     

Extraction of metal ions with a primary amine

This paper describes some experimental results obtained at the extraction of sulfate solutions of U(VI), Mo(VI), V(V), Ce(IV), Zr(IV), Fe(III), Al(III) with a benzene solution of Primene JMT. The aqueous solutions consist of metal sulfates (or other metal salts) in the presence of sulfuric acid with a concentration range of 0–2.1 mol·dm^–3, the concentration of amine in the organic phase being 0.1–0.3 mol·dm^–3. The presence of various species of metal ions in the aqueous phase is considered and the equilibrium concentration of substances extracted in the organic phase is determined. On the basis of the results of chemical analysis (concentration of metals and sulfate ions) the composition of the prevailing complexes in the organic phase is proposed.     

Lanthanide complexes based on a 1,7-diaza-12-crown-4 platform containing picolinate pendants: a new structural entry for the design of magnetic resonance imaging contrast agents

We have synthesized a new macrocyclic ligand, N,N'-Bis[(6-carboxy-2-pyridyl)methyl]-1,7-diaza-12-crown-4 (H 2bp12c4), designed for complexation of lanthanide ions in aqueous solution. The X-ray crystal structure of the Gd (III) complex shows that the metal ion is directly bound to the eight donor atoms of the bp12c4 ligand, the ninth coordination site being occupied by an oxygen atom of a carboxylate group of a neighboring [Gd(bp12c4)] (+) unit, while the structure of the Lu (III) analogue shows the metal ion being only eight-coordinate. The hydration numbers obtained from luminescence lifetime measurements in aqueous solution of the Eu (III) and Tb (III) complexes suggest an equilibrium in aqueous solution between a dihydrated ( q = 2), ten-coordinate and a monohydrated ( q = 1), nine-coordinate species. This has been confirmed by a variable temperature UV-vis spectrophotometric study on the Eu (III) complex. The structure of the complexes in solution has been investigated by (1)H and (13)C NMR spectroscopy, as well as by theoretical calculations performed at the DFT (B3LYP) level. The results indicate that the change in hydration number occurring around the middle of the lanthanide series is accompanied by a change in the conformation adopted by the complexes in solution [Delta(lambdalambdalambdalambda) for q = 2 and Lambda(deltalambdadeltalambda) for q = 1]. The structure calculated for the Yb (III) complex (Lambda(deltalambdadeltalambda)) is in good agreement with the experimental structure in solution, as demonstrated by the analysis of the Yb (III)-induced paramagnetic (1)H shifts.     

Bicyclic and acyclic diamides: comparison of their aqueous phase binding constants with Nd(III), Am(III), Pu(IV), Np(V), Pu(VI), and U(VI)

This report describes affinity measurements for two, water-soluble, methyl-alkylated diamides incorporating the malonamide functionality, N,N,N',N' tetramethylmalonamide (TMMA) and a bicyclic diamide (1a), toward actinide metal cations (An) in acidic nitrate solutions. Ligand complexation to actinides possessing oxidation states ranging from +3 to +6 was monitored through optical absorbance spectroscopy, and formation constants were obtained from the refinement of the spectrophotometric titration data sets. Species analysis gives evidence for the formation of 1, 4, 1, and 2 spectrophotometrically observable complexes by TMMA to An(III, IV, V, and VI), respectively, while for 1a, the respective numbers are 3, 4, 2, and 2. Consistent with the preorganization of 1a toward actinide binding, a significant difference is found in the magnitudes of their respective formation constants at each complexation step. It has been found that the binding affinity for TMMA follows the well-established order An(V) < An(III) < An(VI) < An(IV). However, with 1a, Np(V) forms stronger complexes than Am(III). The complexation of 1a with Np(V) and Pu(VI) at an acidity of 1.0 M is followed by reduction to Np(IV) and Pu(IV), whereas TMMA does not perturb the initial oxidation state for these dioxocations. These measurements of diamide binding affinity mark the first time single-component optical absorbance spectra have been reported for a span of actinide-diamide complexes covering all common oxidation states in aqueous solution.