Relative permittivity data of binary mixtures containing 2-butanol, 2-butanone,and cyclohexane

Relative permittivity measurements were made on binary mixtures of (2-butanol + 2-butanone) and (2-butanol or 2-butanone + cyclohexane) for various concentrations at T = (298.2, 308.2, and 318.2) K. Some experimental results are compared with those obtained from theoretical calculations and interpreted in terms of homo- and heterogeneous interactions and structural effects. The molecular dipole moments were determined using Guggenheim–Debye method within the temperature range of (298.2 to 318.2) K. The variations of effective dipole moment and correlation factor, g, with the mole fraction in these materials were investigated using Kirkwood–Frohlich equation. The pure compounds showed a negative and small temperature coefficient of effective dipole moment. In order to obtain valuable information about heterogeneous interaction (interactions between the unlike molecules), the Kirkwood correlation factor, the Bruggeman dielectric factor and the excess permittivity were calculated. In order to predict the permittivity data of polar–apolar binary mixtures, five mixing rules were applied.     

Dielectric properties of binary mixtures of three butanediols with 1,4-dioxane and 2-ethyl-1-hexanol at T = 298.2 K

Experimental results of dielectric investigations for solutions of the three butanediols {2,3-butanediol (2,3BD), 1,3-butanediol (1,3BD), and 1,4-butanediol (1,4BD)}, in 1,4-dioxane (1,4DX) are reported for various mole fractions at T = 298.2 K. Values of relative permittivity were measured at 100 kHz. The molecular dipole moments were determined using Guggenheim method. The variations of effective dipole moment and correlation factor, g, with mole fraction in these materials were investigated using Kirkwood–Frohlich equation. Dielectric measurements were also carried out on binary polar mixtures of the butanediols with 2-ethyl-1-hexanol (2EH) for various concentrations at T = 298.2 K. The Kirkwood correlation factor, the Bruggeman factor, and the excess permittivity were determined.     

Study of intermolecular interactions through dielectric properties of the mixtures consisting of 1,4-butanediol,primary amyl alcohols and 1,4-dioxane at various temperatures

This paper presents relative permittivities, excess permittivities, effective dipole moments, and excess Kirkwood correlation factors of binary mixtures of 1,4-butanediol with two primary pentanol isomers [1-pentanol (amyl alcohol) + 3-methyl-1-butanol (isoamyl alcohol)] from T = (298.15 to 318.15) K at p = 101.3 kPa over the entire composition range. Experimental permittivity values for polar–non-polar binary systems of (1,4-dioxane + amyl alcohol or isoamyl alcohol) were also obtained as a function of composition at the same range of temperatures. The experimental permittivity data were fitted using Redlich–Kister equation to evaluate the adjustable parameters and the standard errors. From the experimental data, the excess parameters were calculated. In this work, variations of effective dipole moment and correlation factor were investigated using Kirkwood−Frohlich equation. The experimental data of measurements were used in the analysis of the homo- and hetero interactions occurring in these binary solutions.     

Dipole moments of Flourobenzene and its Mesogenic Derivative in 1,4-Dioxane and 1-Butanol Solutions

Experimental data from dielectric investigations of solutions of flourobenzene (FB) and its mesogenic derivative (1-fluoro-4-(4-pentylcyclohexyl) benzene (FPCHB) in 1,4-dioxane are reported for various mole fractions and temperatures. The molecular dipole moments were determined using the Guggenheim-Debye method in the temperature range of 298.2 to 318.2 K. Both fluorinated compounds show a positive and small temperature coefficient for the effective dipole moment. Variations of the effective dipole moment and correlation factor, g, with mole fraction in these mixtures were investigated using the Kirkwood-Frohlich equation. Dielectric measurements were also carried out on binary mixtures of FPCHB with 1-butanol for various concentrations at 318.2 K. The Kirkwood correlation factor, the Bruggeman factor, and the excess permittivity were determined.     

(Liquid + liquid) equilibria of the (water + butyric acid + dodecanol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the (water + butyric acid + dodecanol) ternary system have been determined experimentally at T = (298.2, 308.2 and 318.2) K. Complete phase diagrams were obtained by determining binodal curves and tie lines. The reliability of the experimental tie lines was confirmed by using the Othmer–Tobias correlation. The UNIFAC method was used to predict the phase equilibrium in the ternary system using the interaction parameters determined from experimental data of CH₃, CH₂, COOH, OH and H₂O functional groups. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Excess volumes of mixing in (N,N-dimethylacetamide + methanol + water) and (N,N-dimethylacetamide + ethanol + water) at the temperature 313.15 K

Precise excess volumes of mixing measurements at T = 313.15 K are reported over the whole composition range for binary mixtures: (N,N-dimethylacetamide + water), (N,N-dimethylacetamide + methanol), (N,N-dimethylacetamide + ethanol) and for the ternary mixtures (N,N-dimethylacetamide + methanol + water) and (N,N-dimethylacetamide + ethanol + water). For all the systems, large negative deviations from ideality are observed. The binary results have been fitted using the Redlich–Kister type polynomial. The possibility of predicting the ternary results from the binary ones was examined.     

Isothermal and isobaric (vapour + liquid) equilibria of (N,N- dimethylformamide + 2-propanol + 1-butanol)

The isothermal and isobaric (vapour  +  liquid) equilibria (v.l.e.) for (N, N - dimethylformamide  +  2-propanol  +  1-butanol) and the binary constituent mixtures were measured with an inclined ebulliometer. The experimental results are analyzed using the UNIQUAC equation with temperature-dependent binary parameters. The comparison between the experimental and literature results for binary systems is given. The ternary v.l.e. values are predicted from the binary results.     

Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures at T = (298.15, 303.15, and 308.15) K

Density ρ, viscosity η, and refractive index n_D, values for (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures over the entire range of mole fraction have been measured at temperatures (298.15, 303.15, and 308.15) K at atmospheric pressure. The speed of sound u has been measured at T = 298.15 K only. Using these data, excess molar volume V^E, deviations in viscosity Δη, Lorentz–Lorenz molar refraction ΔR, speed of sound Δu, and isentropic compressibility Δk_s have been calculated. These results have been fitted to the Redlich and Kister polynomial equation to estimate the binary interaction parameters and standard deviations. Excess molar volumes have exhibited both positive and negative trends in many mixtures, depending upon the nature of the second component of the mixture. For the (tetradecane + chlorobenzene) binary mixture, an incipient inversion has been observed. Calculated thermodynamic quantities have been discussed in terms of intermolecular interactions between mixing components.     

Measurement and correlation of solubility of trans-resveratrol in 11 solvents at T = (278.2, 288.2, 298.2, 308.2, and 318.2) K

The solubilities of trans-resveratrol in methanol, ethanol, 1-propanol, 2- propanol, 1-butanol, 1-pentanol, 1-hexanol, ethyl acetate, tetrahydrofuran, acetone, and water (pH 6.0) solvents were measured at T = (278.2, 288.2, 298.2, 308.2, and 318.2) K. The solubilities of trans-resveratrol in selected solvents increase with temperature, but decrease with increasing the number of carbon in alcohol solvents. The experimental data were correlated using a thermodynamic equation.     

(Vapour + liquid) equilibrium in (N,N-dimethylacetamide + ethanol + water) at the temperature 313.15 K

Total vapour pressures, measured at the temperature 313.15 K, are reported for the ternary mixture (N,N-dimethylacetamide + ethanol + water), and for binary constituent (N,N-dimethylacetamide + ethanol). The present results are also compared with previously obtained data for (amide + ethanol) binary mixtures, where amide = N-methylformamide, N,N-dimethylformamide, N-methylacetamide, 2-pyrrolidinone, and N-methylpyrrolidinone. We found that excess Gibbs free energy of mixing for binary (amide + ethanol) mixtures varies roughly linearly with the molar volume of amide.     

Liquid–liquid equilibria of the ternary system water + acetic acid + dimethyl succinate

Liquid–liquid equilibrium (LLE) data of water + acetic acid + dimethyl succinate were measured at 298.2, 308.2, and 318.2 K. Complete phase diagrams were obtained by determining binodal curves and tie lines. The reliability of the experimental tie line data was confirmed by using the Othmer–Tobias correlation. The UNIFAC and modified UNIFAC model were used to predict the phase equilibrium data in the ternary system. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Surface tension of non-ideal binary and ternary liquid mixtures at various temperatures and p = 81.5 kPa

Experimental surface tensions for binary mixtures (1,2-ethandiol + water), (1,2-ethandiol + acetonitrile), and (acetonitrile + water) at temperatures of 283.15 K, 298.15 K, and 308.15 K and the ternary mixture (1,2-ethandiol/water/acetonitrile) at 298.15 K have been measured with the Du Noüy ring tensiometer. The surface tension of the above mentioned binary and ternary systems were correlated with empirical and thermodynamic based models. The methods of Pando et al. and Ku et al. were used to correlate the ternary surface tension data. The Fu et al., Kalies et al. and Wang et al. models were also applied to predict surface tension in the ternary system. The mean average absolute deviations obtained from the comparison of experimental and calculated surface tension values for ternary system with three models are less than 2.4%, which leads to concluding that these models show a good accuracy in different situations in comparison with other predictive equations.     

(Liquid + liquid) equilibria in ternary aqueous mixtures of phosphoric acid with organic solvents at T = 298.2 K

(Liquid + liquid) equilibrium (LLE) data for the ternary mixtures of {water (1) + phosphoric acid (2) + organic solvents (3)} were determined at T = 298.2 K and atmospheric pressure. The organic solvents were cyclohexane, 2-methyl-2-butanol (tert-amyl alcohol), and isobutyl acetate. All the investigated systems exhibit Type-1 behaviour of LLE. The immiscibility region was found to be larger for the (water + phosphoric acid + cyclohexane) ternary system. The experimental LLE results were correlated with the NRTL model, and the binary interaction parameters were obtained. The reliability of the experimental tie-line results was tested through the Othmer–Tobias and Bachman correlation equations. Distribution coefficients and separation factors were evaluated over the immiscibility regions and a comparison of the extracting capabilities of the solvents was made with respect to these factors. The experimental results indicate the superiority of cyclohexane as the preferred solvent for the extraction of phosphoric acid from its aqueous solutions.     

Excess molar enthalpies of {diethyl oxalate + (methanol, + ethanol, + 1-propanol,and + 2-propanol)} at T = (288.2, 298.2, 313.2, and 328.2) K and p = 101.3 kPa

A flow-mixing isothermal microcalorimeter was used to measure excess molar enthalpies for four binary systems of {diethyl oxalate + (methanol, + ethanol, + 1-propanol, and + 2-propanol)} at T = (288.2, 298.2, 313.2, and 328.2) K and p = 101.3 kPa. The densities of the diethyl oxalate at different temperature were measured by using a vibrating-tube densimeter. All systems exhibit endothermic behaviour over the whole composition range, which means that the rupture of interactions is energetically the main effect. The excess molar enthalpies increase with temperature and the molecular size of the alcohols. The experimental results were correlated by using the Redlich–Kister equation and two local-composition models (NRTL and UNIQUAC).     

Excess Gibbs energies and excess molar volumes for binary mixtures: (2-pyrrolidone + water), (2-pyrrolidone + methanol), and (2-pyrrolidone + ethanol) at the temperature 313.15 K

Total vapour pressures and excess molar volumes, measured at the temperature 313.15 K, are reported for three binary mixtures (2-pyrrolidone + water), (2-pyrrolidone + methanol) and (2-pyrrolidone + ethanol). The results are compared with previously obtained data for binary mixtures (amide + A), where amide=N-methylformamide, N,N-dimethylformamide and N-methylacetamide, and A= water, methanol, and ethanol.     

Experimental and theoretical study of quaternary (liquid + liquid) equilibria for mixtures of (methanol or water + ethanol + toluene + n-decane)

Experimental (liquid + liquid) equilibrium data were obtained for the extraction of toluene from n-decane by mixed-solvents (ethanol + water) and (ethanol + methanol) at three temperatures (298.15, 303.15, and 313.15) K and ambient pressure.The measured tie-line data for two quaternary mixtures of {(ethanol +  water) + toluene + n-decane} and {(ethanol + methanol) + toluene + n-decane} are presented. The experimental quaternary (liquid + liquid) equilibrium data have been correlated using the NRTL activity coefficient model to obtain the binary interaction parameters of these components. The NRTL models predict the equilibrium compositions of the quaternary mixtures with small deviations. The partition coefficients and the selectivity factor of the mixed-solvents used were calculated and presented. From our experimental and calculated results, we conclude that for the extraction of toluene from n-decane mixtures the mixed-solvent (ethanol + methanol) has a higher selectivity factor than the other mixed-solvent at the three temperatures studied.     

Ternary equilibrium data of mixtures consisting of 2-butanol,water, and heavy alcohols at T = 298.2 K

Experimental solubility curves and tie-line data for the (water + 2-butanol + organic solvents) systems were obtained at T = 298.2 K and atmospheric pressure. The organic solvents were four heavy alcohols, i.e. 1-hexanol, 1-heptanol, 1-octanol, and 1-decanol. The consistency of the experimental tie-line data was determined through the Othmer–Tobias and Bachman equations. Distribution coefficients and separation factors were calculated to evaluate the extracting capability of the solvents. The experimental data were correlated using the NRTL (α = 0.2) and UNIQUAC models, and binary interaction parameters were obtained. The average root mean square deviation values between the experimental and calculated data show the capability of these models, in particular NRTL model, in correlation of the phase behavior of the ternary systems.     

Phase equilibrium properties of binary aqueous solutions containing ethanediamine, 1,2-diaminopropane, 1,3-diaminopropane,or 1,4-diaminobutane at several temperatures

The vapour pressures of {ethanediamine (EDA) + water}, {1,2-diaminopropane (1,2-DAP) + water}, {1,3-diaminopropane (1,3-DAP) + water} or {1,4-diaminobutane (1,4-DAB) + water} binary mixtures, and of pure EDA, 1,2-DAP, 1,3-DAP, 1,4-DAB, and water components were measured by means of two static devices at temperatures between (293 and 363) K. The data were correlated with the Antoine equation. From these data, the excess Gibbs function (G^E) was calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The {ethanediamine (EDA) + water}, and {1,2-diaminopropane (1,2-DAP) + water} binary systems show negative azeotropic behaviour. The aqueous solutions of EDA, 1,2-DAP, or 1,3-DAP exhibit negative deviations in G^E for all investigated temperatures over the whole composition range whereas the (1,4-DAB + water) binary mixture shows negative G^E for temperatures (293.15 < T/K < 353.15) and a sinusoidal shape for G^E at T = 363.15 K.     

(Liquid + liquid) phase equilibria for (water + 2,3-butanediol + oleyl alcohol) at T = (300.2, 307.2, and 314.2) K

(Liquid + liquid equilibrium) (LLE) data for ternary system: (water + 2,3-butanediol + oleyl alcohol) has been measured at T = (300.2, 307.2, and 314.2) K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer–Tobias and Bachman methods. The nonrandom two liquids equation (NRTL) was used to correlate the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that NRTL could give a good correlation for the LLE data. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Phase equilibria for ternary liquid systems of (water + tetrahydrofuran + nonprotic aromatic solvent) at T = 298.2 K

(Liquid + liquid) equilibrium (LLE) data of the solubility curves and tie-line end compositions are presented for mixtures of {water (1) + tetrahydrofuran (2) + xylene or chlorobenzene or benzyl ether (3)} at T = 298.2 K and P = (101.3 ± 0.7) kPa. Among the studied C6 ring-containing aromatic solvents, xylene gives the largest distribution ratio and separation factors for extraction of tetrahydrofuran. A solvation energy relation (SERLAS) has been used to estimate the (liquid + liquid) equilibria of associated systems containing a nonprotic solvent. The tie-lines were also predicted using the UNIFAC-original model. The reliability of both models has been analyzed against the LLE data with respect to the distribution ratio and separation factor. SERLAS matches LLE data accurately, yielding a mean error of 9.9% for all the systems considered.