CdS/石墨烯复合材料的制备及其可见光催化分解水产氢性能

以氧化石墨烯和CdS为原料, 在乙醇水溶液中采用CdS光催化还原法制备了CdS/石墨烯复合光催化材料, 并用透射电子显微镜(TEM)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)和瞬态光电流等技术对复合材料的结构和光电性能进行了表征. 可见光照射下(λ≥420 nm), 研究了该复合材料光催化分解水产氢的性能. 结果表明, 可见光照射下CdS的光生电子可有效地还原氧化石墨烯, 得到CdS与石墨烯之间具有强相互作用力的CdS/石墨烯复合材料. 与CdS相比, 复合材料中石墨烯作为良好的电子受体和传递介质, 可明显加快CdS光生电子的迁移速率, 提高光生载流子的分离效率, 从而增强复合材料的光电性能和光催化分解水产氢的活性.     

ZnO纳米线形态对其光致发光性能的影响

以多孔氧化铝膜为模板,电化学沉积出Zn纳米线,再通过高温氧化得到ZnO纳米线阵列。通过改变制备多孔氧化铝模板的工艺参数来改变模板纳米孔径,进而改变ZnO纳米线的直径,得到不同形态的ZnO纳米线阵列。应用X射线衍射仪、透射电子显微镜测试技术表征了ZnO纳米线的结构与形貌。结果发现,X射线衍射时会出现随ZnO纳米线直径增大衍射峰增多和增强的现象。采用荧光光谱仪测试样品的光致发光性能,通过Gaussian原理对谱峰的拟合分析了ZnO纳米线形态对其光致发光光谱的影响。结果表明,随着纳米线直径从30nm至60nm依次增大,其结晶性和化学计量比逐渐变好。近紫外区和蓝光区的发射峰随着纳米线直径的增大而蓝移,而纳米线直径为60nm的样品则出现随直径增大而红移的现象。结果可见,直径在55~60nm间的某点将是ZnO纳米线的结构和光致发光性能变化的临界点。     

Ag/ZnO纳米纤维的制备及光催化性能

采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维, 然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面. 利用X射线衍射(XRD)、 X射线光电子能谱(XPS)、 能量色散X射线光谱(EDX)、 扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成的Ag/ZnO纳米纤维的结构和组成进行了表征. SEM结果表明, 直径在5~100 nm之间的银纳米颗粒附着在直径在80~330 nm之间的氧化锌纤维表面形成了异质结构. 以常见的有机污染物甲基橙、 亚甲基蓝和罗丹明B等为降解底物, 对Ag/ZnO纳米纤维的光催化性能进行了表征. 结果表明, 负载银纳米颗粒后, 复合催化剂的光催化性能明显提高.     

纳米复合材料CdS/TiO_2制备与不同模式光催化降解多种染料

采用化学水浴沉淀法再结合溶胶-凝胶和程序升温溶剂热两步法制备了一系列不同比例的CdS/TiO2纳米复合材料。通过X-射线衍射(XRD)、X-射线光电子能谱(XPS)、扫描电镜(SEM)、紫外-可见漫反射吸收光谱(UV-Vis/DRS)和氮气吸附-脱附测试等手段对所合成纳米复合材料的组成、结构和形貌进行了表征。结果表明,该系列CdS/TiO2纳米复合材料为锐钛矿TiO2和六方相CdS的混合晶相,其对可见光有较强吸收,并且随着复合材料中TiO2比例的增加,BET值明显增大。另外,所合成的CdS/TiO2复合材料呈圆球形,颗粒比较均匀。紫外光催化降解甲基橙的实验结果表明,摩尔比为1∶4的CdS/TiO2复合材料的活性明显高于CdS、P25以及其他不同比例的CdS/TiO2。同时,1∶4 CdS/TiO2纳米复合材料在紫外光、可见光和微波辅助光催化等不同模式下对多种结构的染料均有较好的降解效果。     

P3HT修饰一维有序壳核式CdS/ZnO纳米棒阵列复合膜的光电化学性能

采用电化学方法在铟锡氧化物(ITO)导电玻璃上制备了高度有序的ZnO纳米棒阵列, 在ZnO纳米棒阵列上先后电化学沉积CdS纳米晶膜及聚3-己基噻吩(P3HT)薄膜得到P3HT修饰的一维有序壳核式CdS/ZnO纳米阵列结构, 并通过扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、能量散射X射线(EDX)等表征手段证实了该结构的形成. 以此纳米结构薄膜为光阳极组装新型半导体敏化太阳电池, 研究了CdS纳米晶膜的厚度和P3HT薄膜的沉积对电池光伏性能的影响, 初步探讨了电荷在电池结构中的传输机理, 结果表明, CdS纳米晶膜和P3HT薄膜的沉积有效地拓宽了光阳极的光吸收范围, 实验中电池的光电转换效率最高达到1.08%.     

铜掺氧化锌多孔纳米棒的水热合成及其光催化性能

通过两步法合成铜掺杂的氧化锌纳米棒,通过X射线衍射（XRD）、扫描电子显微镜（FESEM）、透射电子显微镜（TEM）、X射线光电子能谱（XPS）和紫外-可见（UV-Vis）分光光谱等技术对系列样品进行了表征,研究并探索了铜掺杂的氧化锌纳米棒光降解染料罗丹明B（RhB）和气体乙醛的催化活性。通过对多孔Cu掺杂ZnO纳米棒光催化分解乙醛进行了评价。多孔Cu掺杂ZnO纳米棒（CZ-5）光催化剂具有最高的催化分解乙醛的能力,比其它多孔Cu掺杂ZnO纳米棒具有很高的催化活性。多孔Cu掺杂ZnO纳米棒光催化剂在室温下在可见光（435 nm）下照射16 h,5.50×10^-4（φ,体积分数）的乙醛气体完全降解为二氧化碳（CO₂）。多孔铜掺杂的氧化锌纳米棒光催化剂的光催化性能的改善主要归因于铜和氧化锌纳米棒之间的协同作用。这种改进的光催化协同作用归因于Cu掺杂ZnO的可见光吸收的延伸和光生电子空穴对的抗重组。     

利用牛血清蛋白合成CdS纳米棒和网状纳米线

采用简单易控、对环境友好的矿化方法, 利用牛血清蛋白(BSA)做模板, 通过Cd2+与硫代乙酰胺(TAA)反应制备了形貌均一的CdS纳米棒和网状纳米线. 分别采用透射电子显微镜(TEM)、X射线能谱(EDS)、X射线衍射(XRD)、荧光(PL)发射谱和导电原子力显微镜(C-AFM)等方法对不同实验温度下制备的CdS样品的结构形貌、成分组成和光学性质及微区电子传输行为进行了表征. 结果表明: 在实验反应温度为20 ℃时, 得到的产物为单分散性好的CdS 纳米棒, 长度为250 nm, 直径为30 nm; 在50 ℃时, 得到网状CdS纳米线, 其长度为2-3 μm; CdS纳米棒和网状纳米线均为立方相闪锌矿结构. 荧光性质的测试表明, CdS纳米棒和网状纳米线具有优良的荧光性能, 电流-电压(I-V)特性的表征表明CdS纳米线具有很好的电导特性.     

Ag/ZnO纳米纤维的制备及光催化性能（英文）

采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维,然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、能量色散X射线光谱(EDX)、扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成的Ag/ZnO纳米纤维的结构和组成进行了表征.SEM结果表明,直径在5~100 nm之间的银纳米颗粒附着在直径在80~330 nm之间的氧化锌纤维表面形成了异质结构.以常见的有机污染物甲基橙、亚甲基蓝和罗丹明B等为降解底物,对Ag/ZnO纳米纤维的光催化性能进行了表征.结果表明,负载银纳米颗粒后,复合催化剂的光催化性能明显提高.     

Ag2O/TiO2纳米线异质结的制备及可见光催化性能

采用化学沉积法制得了氧化银/二氧化钛纳米线异质结(Ag₂O/TNWs)可见光催化剂. 应用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线衍射(XRD)和X射线光电子能谱(XPS)等手段对催化剂进行表征, 并以甲基橙降解为模型反应研究了其光催化性能. 结果表明, 与负载等量氧化银的二氧化钛纳米粒子(Ag₂O/P25)催化剂相比, Ag₂O/TNWs纳米线异质结具有优异的一维增强可见光催化性能.     

全固态Z-型CdS/Au/Bi2MoO6异质结的构筑及其光催化性能

采用简单的化学还原沉积和二次水热的方法成功制备了CdS和Au共同修饰Z型CdS/Au/Bi2MoO6(CdS/Au/BMO)光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征。实验结果表明,CdS/Au/BMO-2复合材料在可见光照射下表现出最佳的降解效率,其降解RhB的速率常数约为BMO的8.8倍和CdS的20倍。Au NPs作为固态电子媒介,为光生电子的传输和转移提供了一个通道,同时Au NPs的表面等离子体共振(SPR)效应和CdS纳米粒子显著拓宽了催化体系对可见光的响应范围;通过对催化剂的组成、结构和光电性能表征,确定了CdS/Au/BMO的能带结构,进而探讨了CdS/Au/BMO活性增强机制。     

Enhanced visible-light-driven photocatalytic activities of 0D/1D heterojunction carbon quantum dot modified CdS nanowires

Zero-dimensional carbon dots (0D C-dots) and one-dimensional sulfide cadmium nanowires (1D CdS NWs) were prepared by microwave and solvothermal methods, respectively. A series of heterogeneous photocatalysts that consisted of 1D CdS NWs that were modified with 0D C-dots (C-dots/CdS NWs) were synthesized using chemical deposition methods. The mass fraction of C-dots to CdS NWs in these photocatalysts was varied. The photocatalysts were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and ultraviolet-visible spectroscopy. Their photocatalytic performance for the spitting of water and the degradation of rhodamine B (RhB) under visible light irradiation were investigated. The photocatalytic performance of the C-dots/CdS NWs was enhanced when compared with that of the pure CdS NWs, with the 0.4% C-dots/CdS NWs exhibiting the highest photocatalytic activity for the splitting of water and the degradation of RhB. The enhanced photocatalytic activity was attributed to a higher carrier density because of the heterojunction between the C-dots and CdS NWs. This heterojunction improved the electronic transmission capacity and promoted efficient separation of photogenerated electrons and holes.     

Co doped ZnO nanowires as visible light photocatalysts

High aspect ratio cobalt doped ZnO nanowires showing strong photocatalytic activity and moderate ferromagnetic behaviour were successfully synthesized using a solvothermal method and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), vibrating sample magnetometry (VSM) and UV–visible absorption spectroscopy. The photocatalytic activities evaluated for visible light driven degradation of an aqueous methylene orange (MO) solution were higher than for Co doped ZnO nanoparticles at the same doping level and synthesized by the same synthesis route. The rate constant for MO visible light photocatalytic degradation was 1.9·10⁻³ min⁻¹ in case of nanoparticles and 4.2·10⁻³ min⁻¹ in case of nanowires. We observe strongly enhanced visible light photocatalytic activity for moderate Co doping levels, with an optimum at a composition of Zn_0.95Co_0.05O. The enhanced photocatalytic activities of Co doped ZnO nanowires were attributed to the combined effects of enhanced visible light absorption at the Co sites in ZnO nanowires, and improved separation efficiency of photogenerated charge carriers at optimal Co doping.     

化学气相沉积法合成高结晶度的三元系Cd1-xZnxS纳米线

以硫化锌、硫化镉和活性碳粉作为反应物,利用化学气相沉积方法成功合成了单晶Cd1-xZnxS纳米线.为了解产物的结构、形貌、组分、微结构以及声子振动模式,对样品进行了扫描电镜、透射电镜、X射线衍射、能谱分析以及拉曼光谱分析.分析显示合成的纳米线为六方铅锌矿结构,生长方向沿着[210]方向,长度均为10μm,直径在80-100 nm之间,x的值约为0.2.拉曼光谱分析显示产物的拉曼峰位与纯CdS相比发生了蓝移.     

化学气相沉积法合成高结晶度的三元系Cd1-xZnxS纳米线

以硫化锌、硫化镉和活性碳粉作为反应物, 利用化学气相沉积方法成功合成了单晶Cd1-xZnxS纳米线. 为了解产物的结构、形貌、组分、微结构以及声子振动模式, 对样品进行了扫描电镜、透射电镜、X射线衍射、能谱分析以及拉曼光谱分析. 分析显示合成的纳米线为六方铅锌矿结构, 生长方向沿着[210]方向, 长度均为10 μm, 直径在80-100 nm之间, x的值约为0.2. 拉曼光谱分析显示产物的拉曼峰位与纯CdS相比发生了蓝移.     

Electrospun nanofibers of TiO2/CdS heteroarchitectures with enhanced photocatalytic activity by visible light

Herein, we have demonstrated that the electrospun nanofibers of TiO(2)/CdS heteroarchitectures could be fabricated through combining electrospinning technique with hydrothermal process. The configuration, crystal structure, and element composition of the as-prepared TiO(2)/CdS heteroarchitectures were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), resonant Raman spectrometer, X-ray photoelectron spectroscopy (XPS). The results indicated that the high-density hexagonal wurtzite CdS crystalline particles of ca. 6-40 nm in diameter were uniformly and closely grown on anatase TiO(2) nanofibers. Especially, the light-absorption properties as well as photocatalytic characteristics of pure TiO(2) nanofibers and TiO(2)/CdS heteroarchitectures with different amount loading of CdS were also investigated. The absorption of TiO(2)/CdS heteroarchitectures was extended to the visible due to effective immobilization of sensitizing agent CdS on TiO(2). In contrast with the pure TiO(2) nanofibers, the TiO(2)/CdS heteroarchitectures showed excellent photocatalytic activity by using rhodamine B dye as a model organic substrate under visible-light irradiation. It was worth noting that the cooperative photocatalytic mechanism of the TiO(2)/CdS heteroarchitectures was also discussed.     

Sunlight responsive photocatalysts: AgBr/ZnO hybrid nanomaterial

A novel high-effective sunlight-induced AgBr/ZnO hybrid nanophotocatalyst has been synthesized and it was characterized by different techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and ultraviolet-visible spectrophotometry (UV-vis). The AgBr/ZnO hybrid nanophotocatalyst has excellent photocatalytic activity for photodegradation of methyl orange (MO) under sunlight irradiation. The MO degradation efficiency for AgBr/ZnO is about 98% after 1 hour under sunlight irradiation. These results suggested that AgBr/ZnO is a promising candidate for the development of highly efficient sunlight photocatalysts. In addition, the photocatalytic mechanism of AgBr/ZnO under sunlight irradiation is illustrated and discussed.     

碳点修饰多孔ZnO纳米棒增强光催化性能

Porous ZnO nanorods that displayed excellent photocatalytic degradation of organic pollutants (RhB and phenol) were prepared via a solvent thermal method followed by surface modification with carbon dots (C-dots) using a deposition method. The photocatalysts were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible (UV-Vis) spectroscopy. The degradation of the organic pollutants using the nanorods was tested under Xe-light illumination and was enhanced following C-dot modification. Nanorods that were modified by the C-dots at a mass fraction of 1.2% (CZn1.2) exhibited the highest photocatalytic activity for the degradation of RhB, which was 2.5 times of the pure porous ZnO nanorods. Additionally, the modified nanorods with strangely oxidation ability could catalyze the degradation of phenol by open-rings reaction under Xe-light illumination. The improved photocatalytic activity was attributed to the effective separation of the photogenerated electrons and holes, in which the C-dots served as the receptor of the photogenerated electrons.     

Growth of long CdS nanowires using a carboxylic acid-functionalized self-assembled monolayer as substrate

We report a novel result that long CdS nanowires with typical width of 70–80 nm and length ranging from several micrometers to tens of micrometers can be obtained by the in situ growth on substrate of a carboxylic acid-functionalized self-assembled monolayer (SAM), which formed from a rigid aromatic molecule on mica surfaces. The as-grown CdS nanowires were characterized by X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM) and Energy-dispersive X-ray spectroscopy (EDS). A possible mechanism that accounts for the formation of the one-dimensional (1D) nanowires was also discussed.