A novel fluorine‐containing graft copolymer bearing perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains

A series of novel graft copolymers consisting of perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains were synthesized by the combination of thermal [2π + 2π] step‐growth cycloaddition polymerization of aryl bistrifluorovinyl ether monomer and atom transfer radical polymerization (ATRP) of methyl methacrylate. A new aryl bistrifluorovinyl ether monomer, 2‐methyl‐1,4‐bistrifluorovinyloxybenzene, was first synthesized in two steps from commercially available reagents, and this monomer was homopolymerized in diphenyl ether to provide the corresponding perfluorocyclobutyl aryl ether‐based homopolymer with methoxyl end groups. The fluoropolymer was then converted to ATRP macroinitiator by the monobromination of the pendant methyls with N‐bromosuccinimide and benzoyl peroxide. The grafting‐from strategy was finally used to obtain the novel poly(2‐methyl‐1,4‐bistrifluorovinyloxybenzene)‐g‐poly(methyl methacrylate) graft copolymers with relatively narrow molecular weight distributions (M_w/M_n ≤ 1.46) via ATRP of methyl methacrylate at 50 °C in anisole initiated by the Br‐containing macroinitiator using CuBr/dHbpy as catalytic system. These fluorine‐containing graft copolymers can dissolve in most organic solvents. This is the first example of the graft copolymer possessing perfluorocyclobutyl aryl ether‐based backbone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Science and technology of perfluorocyclobutyl aryl ether polymers

This article highlights the preparation of perfluorocyclobutyl (PFCB) aryl ether polymers for a multitude of commercial technologies that are of academic and commercial global interest. In this account, the synthesis of various aryl trifluorovinyl ether (TFVE) monomers tailored for specific applications is discussed. The preparation of PFCB aryl ether polymers and their properties is then presented. Topics of PFCB aryl ether polymers and their applications include photonics, polymer light emitting diodes (PLEDs), proton exchange membranes (PEMs) for fuel cells, atomic oxygen (AO) resistant coatings, and hybrid composites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5705–5721, 2007     

Synthesis and characterization of blue‐light emissive carbazole containing perfluorocyclobutyl arylene ether polymers

A series of N‐alkyl/aryl carbazole 3,6‐substituted arylene trifluorovinyl ether (TFVE) monomers were synthesized in high purity and yield from a concise four‐step synthesis using carbazole as a starting material. Condensate‐free, step‐growth chain extension of the monomers afforded perfluorocyclobutyl (PFCB) arylene ether homo‐ and copolymers as solution processable, optically transparent blue‐light emissive materials. Arylene TFVE monomers and conversion to PFCB arylene ether polymers were structurally elucidated and purity confirmed by high resolution mass spectroscopy, NMR (¹H, ¹³C, and ¹⁹F) spectroscopy, gel permeation chromatography, and attenuated total reflectance Fourier transform infrared analysis. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis revealed glass transition temperatures >150 °C and onset of decomposition in nitrogen >410 °C with 40 wt % char yield up to 900 °C. Optical and electrochemical studies included solution (tetrahydrofuran) and solid state (spin cast thin film) UV–vis/fluorescence spectroscopy and cyclic voltammetry which showed structure dependence of these blue emissive systems on the nature of the N‐alkyl/aryl carbazole substitution in either homo‐ or copolymer configurations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 552–560     

Synthesis and characterization of fluorine‐containing PAA‐b‐PTPFCBPMA amphiphilic block copolymer

A series of perfluorocyclobutyl (PFCB) aryl ether‐based amphiphilic diblock copolymers containing hydrophilic poly(acrylic acid) (PAA) and fluorophilic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) segments were synthesized via successive atom transfer radical polymerization (ATRP). 2‐MBP‐initiated and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine‐catalyzed ATRP homopolymerization of the PFCB‐containing methacrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate, can be performed in a controlled mode as confirmed by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.38. The block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.36) were synthesized by ATRP using Br‐end‐functionalized poly(tert‐butyl acrylate) (PtBA) as macroinitiator followed by the acidolysis of hydrophobic PtBA block into hydrophilic PAA segment. The critical micelle concentrations of the amphiphilic diblock copolymers in different surroundings were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the micelles were investigated by transmission electron microscopy and dynamic laser light scattering, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of diblock copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with an initiating group for atom transfer radical polymerization (ATRP), 4‐(2‐bromo‐2‐methylpropionyloxy)‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (Br‐TEMPO), was synthesized by the reaction of 4‐hydroxyl‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy with 2‐bromo‐2‐methylpropionyl bromide. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br‐TEMPO. The obtained polystyrene had an active bromine atom for ATRP at the ω‐end of the chain and was used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare block copolymers. The molecular weights of the resulting block copolymers at different monomer conversions shifted to higher molecular weights and increased with monomer conversion. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2468–2475, 2006     

Synthesis of AB2 miktoarm star-shaped copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with two initiating groups for atom transfer radical polymerization (ATRP), 4-(2,2-bis-(methyl 2-bromo isobutyrate)-propionyloxy)-2,2,6,6-tetramethyl-1-piperidinyloxy (Br₂-TEMPO), was synthesized by reacting 4-hydroxyl-2,2,6,6-tetramethyl-1-piperidinyloxy with 2,2-bis-(methyl 2-bromo isobutyrate) propanoic acid. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br₂-TEMPO. The obtained polystyrene had two active bromine atoms for ATRP at the ω-end of the chain and was further used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare AB₂-type miktoarm star-shaped copolymers. The molecular weights of the resulting miktoarm star-shaped copolymers at different monomer conversions shifted to higher molecular weights without any trace of the macroinitiator, and increased with monomer conversion.     

Novel segmented copolymers by combination of controlled ionic and radical polymerizations

Transformation of different living and non‐living polymerization mechanisms to controlled/“living” atom transfer radical polymerization (ATRP) in order to prepare block and graft copolymers is described. The synthesis and characterization of macroinitiators and the resulting segmented copolymers is discussed.     

Mechanistic and Synthetic Aspects of Atom Transfer Radical Polymerization

Abstract

Mechanistic and synthetic aspects of atom transfer radical polymerization (ATRP) are reviewed. This controlled/“living” system polymerizes many monomers including styrenes, (meth)acrylates, acrylonitrile and dienes. The halogen end groups can be converted to other functional groups such as amines and azides. In addition to producing well-defined linear homopolymers, statistical copolymers, block copolymers, and gradient copolymers, ATRP can be used to synthesize graft and hyperbranched copolymers through copolymerization with functionalized monomers. Selection of appropriate conditions for ATRP depends on targeted molecular weight and degree of polymer chain end-functionality and includes considering the monomer(s) to be polymerized, initiator structure/reactivity, amount of catalyst/deactivator used, halogen end-group used, and temperature.     

Graft copolymers by atom transfer polymerization

Various graft copolymers have been prepared by atom transfer radical polymerization (ATRP) using both “grafting through” and “grafting fromõ approaches. The synthesis and some properties are reviewed.     

原子转移自由基聚合制备聚酯二元醇接枝聚苯乙烯

聚酯二元醇经氯甲基化制备了聚酯二元醇大分子引发剂,通过原子转移自由基聚合技术,合成了聚酯二元醇－ｇ－聚苯乙烯接枝聚合物。用＾１Ｈ－ＮＭＲ、ＦＴ－ＩＲ和ＧＰＣ表征了接枝聚合物,结果表明分子量与转化率呈线性关系,且分子量分布较窄,接枝聚合反应是一个可控过程。     

Grafting of methacrylates and styrene on to polystyrene backbone via a “grafting from” ATRP process at ambient temperature

Well defined graft copolymers are prepared by “grafting from” atom transfer radical polymerization (ATRP) at room temperature (30 °C). The experiments were aimed at grafting methacrylates and styrene at latent initiating sites of polystyrene. For this purpose, the benzylic hydrogen in polystyrene was subjected to allylic bromination with N‐bromosuccinimide and azobisisobutrylnitirle to generate tertiary bromide ATRP initiating sites (Br? C? PS). The use of Br? C? PS with lesser mol % of bromide initiating groups results in better control and successful graft copolymerization. This was used to synthesize a series of new graft copolymers such as PS‐g‐PBnMA, PS‐g‐PBMA, PS‐g‐GMA, and PS‐g‐(PMMA‐b‐PtBA) catalyzed by CuBr/PMDETA system, in bulk, at room temperature. The polymers are characterized by GPC, NMR, FTIR, TEM, and TGA. Graft copolymerization followed by block polymerization enabled the synthesis of highly branched polymer brush, in which the grafting density can be adjusted by appropriate choice of bromide concentration in the polystyrene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3818–3832, 2007     

Preparation of homopolymers and block copolymers in miniemulsion by ATRP using activators generated by electron transfer (AGET)

A new initiating/catalytic system for atom transfer radical polymerization (ATRP) is reported. This system starts with alkyl halides as initiators and transition metal complexes in their oxidatively stable state (e.g., Cu(II)Br2/ligand) as catalysts. The activators are generated by electron transfer (AGET) without involvement of initiating organic radicals. AGET ATRP has a significant advantage over simultaneous reverse and normal initiation (SR&NI) ATRP, because it provides a simple route for synthesizing pure polymers with complex architectures such as star copolymers, block copolymers, etc. Furthermore, AGET ATRP can be also successfully carried out in miniemulsion. Homopolymers and pure block copolymers were successfully synthesized via ATRP in miniemulsion using AGET ATRP. The final products were analyzed via two-dimensional chromatography, which combines high performance liquid chromatography (HPLC) and gel permeation chromatography (GPC). The resulting chromatograms showed that pure linear block copolymers and star block copolymers were prepared without the presence of any homopolymers.     

采用ATRP合成天然橡胶接枝共聚物——Ⅲ.NR-g-PMMA的制备

N-溴代丁二酰亚胺与天然橡胶(NR)反应合成了大分子引发剂——溴代天然橡胶[NR-Br(1)].通过原子转移自由基聚合(ATRP),以CuBr/PMDTA为催化体系,1引发甲基丙烯酸甲酯(MMA)接枝共聚制得新型天然橡胶-g-聚甲基丙烯酸甲酯[NR-g-PMMA(2)],其结构经1H NMR和IR表征.初步聚合反应动力学研究结果表明,NBS与NR在高温下反应容易伴随双键加成和环化反应,于室温反应所得1具有较高的引发活性;接枝聚合符合一级动力学反应,即2的分子量随MMA单体转化率的提高而增加.     

Synthesis of block and graft copolymers of β-pinene and styrene by transformation of living cationic polymerization to atom transfer radical polymerization

The transformations of living cationic polymerization to ATRP to form the block and graft copolymers of β-pinene with styrene were performed. Poly(β-pinene) carrying benzyl chloride terminal [poly(β-p)StCl] was prepared by capping the living poly(β-pinene), which was obtained with 1-phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, with a few units of styrene. Poly(β-p)StCl, in conjunction with CuCl and bpy, could initiate the ATRP of styrene and gave well-defined block copolymer of β-pinene and styrene. In contrast, tert-alkyl-chlorine-capped poly(β-pinene) [poly(β-p)Cl] obtained by living cationic polymerization of β-pinene per se without capping of styrene gave a mixture of desired block copolymers and unreacted poly(β-p)Cl due to the low initiating reactivity of poly(β-p)Cl. Brominated poly(β-pinene) synthesized by the quantitative bromination of poly(β-pinene) using NBS was also used to initiate the ATRP of styrene in the presence of CuBr and bpy to prepare the graft copolymer of β-pinene and styrene. The first-order kinetic characteristic and linear increment of molecule weight with the increasing of monomer conversion indicated the living nature of this ATRP grafting.     

Synthesis and comparison of CF3 versus CH3 substituted perfluorocyclobutyl (PFCB) networks for optical applications

A novel aryl trifluorovinyl ether monomer, 1,1,1‐tris(4‐trifluorovinyloxyphenyl)‐2,2,2‐trifluoroethane ( 5 ), was prepared via a multistep reaction sequence adapted from previously reported procedures. Monomer 5 polymerizes by free‐radical mediated thermal cyclodimerization to produce a crosslinked perfluorocyclobutyl (PFCB) polymer. Substituting CH₃ for CF₃ did not affect the polymerization kinetics as measured by differential scanning calorimetry. Surprisingly, the refractive index of poly5 (1.4931 at 1550 nm) is slightly higher than that measured for poly6 (1.4876 at 1550 nm) despite the significant increase in fluorine content. Compared to the CH₃‐containing monomer 6 , fluorinated analogue 5 exhibits increased thermal and thermal oxidative stability and thus we expected lower optical loss for long‐term high performance applications. Copolymerization with existing aryl trifluorovinyl ether monomers should allow access to new PFCB network copolymers with a tailored performance. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5292–5300, 2004     

Densely grafting copolymers of ethyl cellulose through atom transfer radical polymerization

Densely grafting copolymers of ethyl cellulose with polystyrene and poly(methyl methacrylate) were synthesized through atom transfer radical polymerization (ATRP). First, the residual hydroxyl groups on the ethyl cellulose reacted with 2‐bromoisobutyrylbromide to yield 2‐bromoisobutyryloxy groups, known to be an efficient initiator for ATRP. Subsequently, the functional ethyl cellulose was used as a macroinitiator in the ATRP of methyl methacrylate and styrene in toluene in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst system. The molecular weight of the graft copolymers increased without any trace of the macroinitiator, and the polydispersity was narrow. The molecular weight of the side chains increased with the monomer conversion. A kinetic study indicated that the polymerization was first‐order. The morphology of the densely grafted copolymer in solution was characterized through laser light scattering. The individual densely grafted copolymer molecules were observed through atomic force microscopy, which confirmed the synthesis of the densely grafted copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4099–4108, 2005     

Synthesis of a New Macroperoxy Initiator with Methyl Methacrylate and T-Butyl Peroxy Ester by Atom Transfer Radical Polymerization and Copolymerization with Conventional Vinyl Monomers

In this study, we present the synthesis of poly-MMA macroperoxy initiators obtained by the ATRP of MMA with bromo methyl benzyl t-butyl peroxy ester (t-BuBP) as an initiator, and CuX (X:Br or Cl)/2,2′-bipyridine (bpy) as a catalyst system at 0, 20, 30 and 40°C. The peroxygen groups do not decompose during the ATRP reaction, because low reaction temperatures used for the ATRP reaction are not enough to decompose them. The peroxygen groups of poly-PMMA macroperoxy initiators can lead them to react with a monomer by using appropriate reaction conditions to obtain the block or graft copolymers. For this purpose, poly-MMA macroperoxy initiators were used to synthesize poly(MMA-b-S) block copolymers with S and used for graft copolymerization of polybutadiene (PBd) and natural rubber (RSS-3) to obtain crosslinked poly(MMA-g-PBd) and poly(MMA-g-RSS-3) graft copolymers. Swelling ratio values of the crosslinked graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by FT-IR, ¹H-NMR, GPC, DSC, SEM, and the fractional precipitation (γ) techniques. The reaction schemes were also performed using the HYPERCHEM 7.5 program. The mechanical properties of the products were investigated.     

活性正离子聚合与原子转移自由基聚合转换合成聚β-蒎烯接枝共聚物

通过活性正离子聚合与原子转移自由基聚合(ATRP)转换合成了β-蒎烯与甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、苯乙烯(St)的新型接枝共聚物.首先以α-氯代乙苯/TiCl4/Ti(OiPr)4/nBu4NCl体系引发β-蒎烯活性正离子聚合,合成预定分子量大小和窄分子量分布的聚β-蒎烯,然后经N-溴代琥珀酰亚胺(NBS)定量溴化,得到溴化聚β-蒎烯大分子引发剂(Br/β-蒎烯链节摩尔比为0.5).然后将该大分子引发剂与溴化亚铜(CuBr)/2,2′-联吡啶(bpy)复合,引发MMA、BA、St进行ATRP接枝聚合.接枝反应显示一级动力学特征,且产物的分子量及分子量分布可控,表明上述ATRP接枝聚合反应具有可控聚合特征.接枝产物的结构经1H-NMR分析得到进一步证实.     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

Synthesis of graft copolymer of ethyl cellulose through living polymerization and its self-assembly

Copolymers of ethyl cellulose (EC) with polystyrene (PSt) were synthesized through atom transfer radical polymerization (ATRP). The molecular weight of graft copolymers increased without any trace of the EC macro-initiator, and the polydispersity of the side chains was low. The molecular weight of the side chains increased with the monomer conversion. Kinetic study indicated that the polymerization was first order. The micelle characteristics of the graft copolymer in acetone were investigated using dynamic light scattering (DLS), atom force microscopy (AFM) and transmission electron microscopy (TEM). With increasing the concentration, micelles were gradually formed from the solution. The TEM and AFM images indicated that the micelles had spherical shape and showed core-shell structure.