White-light emission from annealed ZnO:Si nanocomposite thin films

As grown ZnO:Si nanocomposites of different compositional ratios were fabricated by thermal evaporation techniques. These films were subjected to post-deposition annealing under high vacuum at a temperature of 250 °C for 90 min. The photoluminescence (PL) spectra of annealed samples have shown marked improvements both in terms of intensity and broadening. Structural and Raman analyses show formation of a Zn–Si–O shell around ZnO nanoclusters wherein on heating Zn₂SiO₄ compound forms resulting in huge UV, orange and red peaks at 310, 570 and 640 nm in PL. The new emissions due to Zn₂SiO₄ completes white light spectrum. The study not only suggests that 1:2 ratio is the best suited for material manipulation but also shows process at the interface of ZnO nanoclusters and silicon matrix leads to new PL emissions.     

Room temperature photoluminescence property of Mo-doped In2O3 thin films

Mo-doped In₂O₃ thin films have been prepared on glass substrates using an activated reactive evaporation method and systematically studied the effect of oxygen partial pressure on the structural, optical, electrical and photoluminescence properties of the films. The obtained films are highly transparent and conductive. The films exhibited the lowest electrical resistivity of 5.2 × 10⁻⁴ Ω cm, with an average optical transmittance of 90% in the visible region. An intensive photoluminescence emission peaks were observed at 415 and 440 nm.     

Optical Kerr effect exhibited by carbon nanotubes and carbon/metal nanohybrid materials

Structural modification of carbon nanotubes in combination with metallic nanoparticles is reported. An enhancement in the nonlinear optical refraction of multi-wall carbon nanotubes by the incorporation of platinum nanoparticles was observed. Comparative results were analyzed taking into account the participation of single-wall carbon nanotubes that originate a decrease in the nonlinear optical response of the multi-wall carbon nanotubes integrating a thin film. A Nd:YAG laser system featuring 532 nm wavelength with 4 ns pulse duration in a two-wave mixing experiment was employed for exploring the studied optical nonlinearities of the samples. The contribution of optical processes to mechanical characteristics dependent on high optical irradiance in carbon nanotubes was described. A variation in the mass density associated to the optically irradiated tubes allowed us to calculate the change in Young's modulus in a thin film configuration. The estimation of an opto-mechanical phenomenon was based on the evaluation of the nonlinearity of index responsible for the optical Kerr effect. According to Raman and optical evaluations, the inclusion of metallic nanoparticles in carbon structures results in a modification of surface that also gives origin to noticeable optical Kerr nonlinearities. Potential applications for developing laser-induced controlled opto-mechanical nanohybrid systems can be contemplated.     

Photoluminescence of chemical solution-derived amorphous ZnO layers prepared by low-temperature process

Growth characteristic and optical properties of the amorphous ZnO thin films prepared on soda-lime–silica glass substrates by chemical solution process at 100 and 200 °C were investigated by using X-ray diffraction analysis, scanning probe microscope, ultraviolet spectrophotometer, and photoluminescence. The films exhibited an amorphous pattern even when finally heat treated at 100–200 °C for 60 min. The photoluminescence spectrum of amorphous ZnO films shows a strong near-band-edge emission, while the visible emission is nearly quenched.     

Luminescence and physical properties of copper doped CdO derived nanostructures

In this paper, we studied the photoluminescence (PL), the morphological, electrical and optical properties of pure and copper-doped cadmium oxide. CdO films were grown by a facile sol–gel spin coating process at 1200 rpm, and doped with copper at 2 and 3%. A (1 1 1)-oriented cubic structure with a lattice parameter of a=4.69 Å was confirmed by X-ray diffraction. Copper was shown to improve the optical transmittance in the short wavelength range of the visible spectrum. The optical band gap of CdO ranged between 2.49 and 2.62 eV as a result of Cu content. At room temperature, resistance fell drastically with Cu doping levels. AFM analysis of samples exhibited nano-mounts and nanowires. Finally, PL results showed a strong blue–violet emission peak at 2.80 eV.     

Magnetic and magneto-optical properties of MnSb films on various substrates

Magnetic and magneto-optical properties of MnSb films with different crystalline orientations on various semiconductors of GaAs(1 0 0), GaAs(1 1 1)A, B, and sapphire(0 0 0 1) have been measured by a vibrating sample magnetometer (VSM) and a home-made magneto-optical Kerr effect (MOKE) system. All these samples have their easy axes in the plane and show ferromagnetic properties. Among these samples, the film on GaAs(1 1 1)B has the lowest coercive force H_c and the largest squareness (SQ) value, whereas the film on GaAs(1 0 0) shows the largest H_c and the lowest SQ value. A large Kerr rotation angle of about 0.3° was observed at a wavelength of λ=632.8 nm for the film on sapphire in the field applied both parallel and perpendicular to the film plane. However, the MnSn films on other substrates do not have an observable Kerr rotation. The dynamic effect of the hysteresis was also measured using our MOKE system. As the frequency of applied magnetic field increases, the loop rounds off at the corners and the loop area increases.     

Effect of phosphorus irradiation on the structural,electrical, and optical characteristics of ZnO thin films

Phosphorus irradiation at a low energy (50 keV) and at a dosage of 8×10¹⁴ ions/cm² was carried out on 〈002〉 ZnO films grown by using a pulsed laser deposition technique (Sample A). Subsequent rapid thermal annealing at 650 °C and 750 °C was performed to remove defects resulting from the irradiation (samples B and C, respectively). Atomic force microscopy was used to determine the root mean square roughness, which was 10.07, 8.66, and 9.31 nm for samples A, B, and C, respectively. Low-temperature photoluminescence measurements revealed increased deep-level defect peaks following irradiation; however, the subsequent annealing minimized the defects. Although the dominant donor-bound exciton peak verifies the n-type conductivity of the films, the free–electron–to–acceptor and donor-to-acceptor pair peaks in the irradiated samples confirm an increase in acceptor concentration.     

Enhanced magneto-optical effect due to interface alloy formation in Co–Pt (1 1 1) ultrathin films upon thermal annealing

After postdeposition annealing in the temperature range of 500–800 K, a highly enhanced magneto-optical Kerr response up to a maximal value 300% of that before annealing, is observed for 1–2 ML ultrathin Co–Pt (1 1 1) films. With help of low energy electron diffraction and Auger electron spectroscopy, this enhancement of magneto-optical response is found to be correlated to the Co–Pt alloy formation at interface.     

Nonlinear optical study of palladium Schiff base complex using femtosecond differential optical Kerr gate and Z-scan techniques

A femtosecond differential optical Kerr gate (DOKG) and Z-scan techniques, have been applied to investigate the third-order optical nonlinearity of composite film of the coordination complex [PdLPPh₃] (L=N-(2-pyridyl)-N′-(salicylidene)hydrazine, PPh₃=triphenylphosphine). Film exhibits superior nonlinear optical properties in the near-infrared spectral region. The nonlinear response time and third-order nonlinear optical susceptibility of complex were found to be≤90 fs and 3.9×10^?10 esu, respectively. The Z-scan result shows that saturable absorption property of the film and its nonlinear absorption coefficient of the sample was found to be ?23 cm/GW.     

Polycrystalline lead iodide films produced by solution evaporation and tested in the mammography X-ray energy range

Lead iodide polycrystalline films have been deposited on corning glass substrates using solution evaporation in oven. Films 6 μm-thick were obtained with full coverage of the substrates as verified by scanning electron microscopy. Some pin-holes were observable. X-ray diffraction revealed a crystalline structure corresponding to the 4 H–PbI₂ polytype formation. Polarized Raman scattering experiments indicated a lamellar structure. Anisotropy was also investigated using depolarization ratio calculations. The optical and electrical properties of the samples were investigated using photoluminescence and dark conductivity as a function of temperature, respectively. Activation energies of 0.10 up to 0.89 eV were related to two main electrical transport mechanisms. Films were also exposed to X-ray irradiation in the mammography X-ray energy range. The detector produced was also exposed to X-ray from 5 mR up to 1450 mR. A linear response was observed as a function of dose with a slope of 0.52 nA/mm² per mR.     

Effect of electron beam on structural,linear and nonlinear properties of nanostructured Fluorine doped ZnO thin films

Electron beam induced effects on Fluorine doped ZnO thin films (FZO) grown by chemical spray pyrolysis deposition technique were studied. The samples were exposed to 8 MeV electron beam at different dose rate ranging from 1 kGy to 4 kGy. All films exhibit a polycrystalline nature which shows an increase in crystallanity with irradiation dosages. The electron beam irradiation effectively controls the films surface morphology and its linear optical characteristics. Z-Scan technique was employed to evaluate the sign and magnitude of nonlinear refractive index and nonlinear absorption coefficient using a continuous wave laser at 632.8 nm as light source. Enhancement in the third order nonlinear optical properties was were noted due to electron beam irradiation. Tailoring the physical and NLO properties by electron beam, the FZO thin films becomes a promising candidate for various optoelectronic applications such as phase change memory devices, optical pulse compression, optical switching and laser pulse narrowing.     

High resolution electron energy loss spectroscopy surface studies of hydrogenated detonation nano-diamond spray-deposited films

Nano-diamond films composed of 3–5 nm grains prepared by the detonation method and spray deposited onto silicon substrates were examined by high resolution electron energy loss spectroscopy (HR-EELS), Raman spectroscopy and transmission electron microscopy. The HR-EEL spectrum of the annealed and hydrogenated films displays dominant C–H losses at 360–365 meV; the diamond optical phonon and its overtones. These results suggest that the films reveal well defined hydrogenated diamond surfaces on the nanometric scale. Detailed analysis of the diamond optical phonon overtone revealed a red-shift of the basic C–C vibration by 5 meV. We attribute this shift to a phonon quantum confinement effect detected by HR-EELS spectroscopy.     

Nonlinear optical properties of silver colloidal solution by in situ synthesis technique

The silver colloidal solutions were prepared by in situ synthesis technique in the presence of the Polymethyl Methacrylate, which was polymerized by reversible addition-fragmentation transfer. The UV–VIS spectra and transmission electron microscopy had shown the formation of sphere silver nanoparticles with average size of 10 nm. Nonlinear optical properties as a function of silver concentration were studied using Z-scan technique with 13 ns pulse duration at 532 nm. The optical nonlinearity enhancement was observed by increasing the concentration. The third-order nonlinear susceptibility χ⁽³⁾ was measured to 1.045 × 10⁻¹¹ esu when the concentration was 2.13 mg/ml. Besides, the sample was founded to exhibit a shift from saturable absorption to reverse saturable absorption at higher incident laser energy. The reverse saturable absorption was observed to be responsible for the optical limiting characteristics in our experiments.     

Nonlinear optical properties of erbium doped zinc oxide (EZO) thin films

Undoped and Erbium (Er) doped zinc oxide (EZO) thin films were deposited on glass substrate by sol–gel method using spin coating technique with different doping concentration. EZO films were characterized using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), UV–VIS-NIR transmission and single beam z scan method under illumination of frequency doubled Nd:YAG laser. The deposited films were found to be well crystallized with hexagonal wurtzite structure having a preferential growth orientation along the ZnO (002) plane. A blue-shift was observed in the band gap of EZO films with increasing Er concentration. All the films exhibited a negative value of nonlinear refractive index (n₂) at 532 nm which is attributed to the two photon absorption and weak free carrier absorption. Third order nonlinear optical susceptibility, χ⁽³⁾ values of EZO films were observed in the remarkable range of 10^? 6 esu. EZO (0.4 at.%) sample was found to be the best optical limiter with limiting threshold of 1.95 KJ/cm².     

Infrared broadband emission of bismuth–thulium co-doped lanthanum–aluminum–silica glasses

The Bi–Tm co-doped SiO₂–Al₂O₃–La₂O₃ (SAL) glasses, which exhibited a broadband near-infrared (NIR) emission was investigated by the optical absorption and photoluminescence spectra. The super broadband near-infrared emission from 1000 to 2100 nm, which covered the whole O, E, S, C and L bands, was observed in the Bi–Tm co-doped samples, as a result of the overlap of the Bi-related emission band (centered at 1270 nm) and the emission from Tm^{3+ 3}H₄→³F₄ transition (1440 nm) as well as Tm^{3+ 3}F₄→³H₆ transition (1800 nm). Relative luminescence intensity at 1270, 1440 and 1800 nm wavelength varied depending on the mixing ratio of Bi and Tm and the full-width at half-maximum (FWHM) extending from 1000 to 1600 nm could be 400 nm. These results indicated that Bi–Tm co-doped SiO₂–Al₂O₃–La₂O₃ glasses could provide potential applications in tunable lasers as well as the broadband optical amplifiers in WDM system.     

Observation of nanostripes and -clusters in (Nd, EuGd)Ba2Cu3Ox superconductors

Nanostripes are observed in melt-textured and single-crystalline samples of the ternary light rare earth (LRE)-compound (Nd_0.33Eu_0.33Gd_0.33)Ba₂Cu₃O_x (NEG) by means of atomic force microscopy, scanning tunnelling microscopy at ambient conditions, combined with transmission electron microscopy and electron backscatter diffraction. This enables the observation of several important features: The nanostripes are formed by chains of nanoclusters, representing the LRE/Ba substitution. The dimensions of the nanostripes are similar for both types of NEG samples. The periodicity of the nanostripes is found to range between 40 and 60 nm; the shape of the nanoclusters is elliptic with a major axis length between 300 and 500 nm and a minor axis length of about 30–150 nm. The stripes are filling effectively the space in between the twin boundaries. Concerning the flux pinning, the nanoclusters are the important pinning sites, not the nanostripes themselves.     

Decay of orientational grating of weakly confined excitons in GaAs thin films

We report the dynamical properties of the exciton orientation in GaAs thin films using the orientational grating (OG) technique. From the results of excitation-power dependence of OG signal, we confirmed that the OG signal comes from the optical nonlinearity of weakly confined excitons. In addition, the OG-decay time decreases with an increase of excitation power due to exciton–exciton interaction, and the shortest decay time is below 1 ps. Our results may imply the potential application of optical nonlinearity of weakly confined exciton to ultrafast switching devices operating at 1 Tbit/s.     

Structural and optical properties of Co-doped ZnO nanocrystallites prepared by a one-step solution route

Zinc oxide (ZnO) nanocrystallites with different Co-doping levels were successfully synthesized by a simple one-step solution route at low temperature (95 °C) in this study. The structure and morphology of the samples thus obtained were characterized by XRD, EDS, XPS and FESEM. Results show that cobalt ions, in the oxidation state of Co²⁺, replace Zn²⁺ ions in the ZnO lattice without changing its wurtzite structure. The dopant content varies from 0.59% to 5.39%, based on Co-doping levels. The pure ZnO particles exhibit well-defined 3D flower-like morphology with an average size of 550 nm, while the particles obtained after Co-doping are mostly cauliflower-like nanoclusters with an average size of 120 nm. Both the flower-like pure ZnO and the cauliflower-like Co:ZnO nanoclusters are composed of densely arrayed nanorods. The optical properties of the ZnO nanocrystallites following Co-doping were also investigated by UV–Visible absorption and Photoluminescence spectra. Our results indicate that Co-doping can change the energy-band structure and effectively adjust the luminescence properties of ZnO nanocrystallites.     

Thermal oxidation-grown vanadium dioxide thin films on FTO (Fluorine-doped tin oxide) substrates

By deposition of metallic vanadium on FTO substrate in Argon atmosphere at room temperature, the sample was then annealed in furnace for 2 h at the temperature of 410 °C in air ambient. (1 1 0) -orientated vanadium dioxide films were prepared on the FTO surface. A maximum transmittance of ∼40% happened at 900–1250 nm region at room temperature. The change of optical transmittance at this region was ∼25% between semiconducting and metallic states. In particular, vanadium dioxide thin films on FTO exhibit semiconductor–metal phase transition at ∼51 °C, the width of the hysteresis loop is ∼8 °C.     

Factors affecting the electro-optical and structural characteristics of nano crystalline Cu doped (Cd–Zn)S films

This work investigates the effects of the temperature, deposition time and annealing ambient on the electro-optical and structural properties of nano crystalline (Cd–Zn)S films prepared by chemical bath deposition (CBD). The deposited films being uniform and adherent to the glass substrates are amorphous in nature and the crystallinity as well as the grain size is found to increase on post-deposition annealing. The obtained specimens are thoroughly characterized before and after annealing paying particular attention to their structure, composition and morphology. Annealing in air reduces the extent of disorder in grain boundaries and energy band-gap. A correlation between the structural and optical properties is investigated in detail. The surface morphology and structural properties of the as-deposited and annealed (Cd–Zn)S thin films are studied using X-ray diffraction (XRD), scanning electron microscope (SEM) and optical transmission spectra. The optical transmission spectra are recorded within the range of 300–800 nm and 300–900 nm. The electroluminescent (EL) intensity is found to be maximum at a particular temperature, which decreases with further increase in temperature and peaks of photoluminescent (PL) and EL spectra are centered at 546 nm and 592 nm. The emission intensity also increases with increasing thickness of the film.