The influence of some processing conditions on host crystal structure and phosphorescence properties of SrAl2O4:Eu2+, Dy3+ nanoparticle pigments synthesized by combustion technique

The spectroscopic and host phase properties of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors with a series of different initiating combustion temperature, urea concentration as a fuel and critical pH of precursor solution are investigated. The SrAl₂O₄:Eu²⁺, Dy³⁺ nanoparticle pigments were obtained by exothermic combustion process within less than 5 min. The sample that ignited at initiating combustion temperature of 600 °C exhibits highest intensity emission peak at 517 nm in which the SrAl₂O₄ host phase has the maximum fraction of monoclinic SrAl₂O₄ phase. The excitation spectra consist of 240 and 254 nm broad peaks. The experimental results show that the optimum ratio of urea is 2.5 times higher than theoretical quantities for best emission condition of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphor particles. The critical pH was obtained about 5.2. The crystallite size of these pigments is about 40 nm before thermal treatment and 62 nm after thermal treatment, respectively.     

Effect of calcination temperature on phase transformation,structural and optical properties of sol–gel derived ZrO2 nanostructures

Zirconia (ZrO₂) nanostructures of various sizes have been synthesized using sol–gel method followed by calcination of the samples from 500 to 700 °C. The calcined ZrO₂ powder samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infra-red spectroscopy (FT-IR), UV–visible spectroscopy (UV–vis.), Raman spectroscopy (RS) and thermogravimetric analysis (TGA). The phase transformation from tetragonal (t) to monoclinic (m) was observed. The average diameter of the ZrO₂ nanostructures calcined at 500, 600 and 700 °C was calculated to be 8, 17 and 10 nm, respectively. The ZrO₂ sample calcined at 500 °C with tetragonal phase shows a direct optical band gap of 5.1 eV. The value of optical band gap is decreased to 4.3 eV for the ZrO₂ calcined at 600 °C, which contains both tetragonal (73%) and monoclinic (27%) phases. On further calcination at 700 °C, where the ZrO₂ nanostructures have 36% tetragonal and 64% monoclinic phases, the optical band gap is calculated to be 4.8 eV. The enhancement in optical band gap for ZrO₂ calcined at 700 °C may be due to the rod like shape of ZrO₂ nanostructures. The tetragonal to monoclinic phase transformation was also confirmed by analyzing Raman spectroscopic data. The TG analysis revealed that the ZrO₂ nanostructure with dominance of monoclinic phase is found to be more stable over the tetragonal phase. In order to confirm the phase stability of the two phases of ZrO₂, single point energy is calculated corresponding to its monoclinic and tetragonal structures using density functional theory (DFT) calculations. The results obtained by theoretical calculations are in good agreement with the experimental findings.     

Fluorescent properties of a green- to red-emitting Eu3+, Tb3+ codoped amorphous calcium silicate phosphor

A Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor was prepared by heating a Eu³⁺, Tb³⁺ codoped calcium silicate hydrate phosphor formed by liquid-phase reaction for 30 min at 900 °C. The excitation peak wavelength of the resulting phosphor was 379 nm and the emission peak wavelengths were at 542 nm, attributed to the ⁵D₄→⁷F₅ transition of Tb³⁺, and at 613 mm, attributed to the ⁵D₀→⁷F₁ transition of Eu³⁺. The intensity ratio of the two peaks could be freely controlled by varying the Eu/Tb atomic ratio of the Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor, allowing light to be emitted over a wide range from green to red. It was clarified that electron transfer from Tb³⁺ to Eu³⁺ is occurring.     

The influence of Eu3+ doping on photoluminescent properties of red emitting phosphor YInGe2O7:Eu3+ by microwave assisted and conventional sintering method

This paper describes an investigation of the crystalline morphology and photoluminescent properties of YInGe₂O₇ powders doped with different Eu³⁺ concentrations using microwave assisted sintering and conventional sintering. X-ray powder diffraction analysis confirmed the formation of monoclinic YInGe₂O₇ structure as YInGe₂O₇:Eu³⁺ powders were sintered at 1200 °C in microwave furnace for 1 h, and the raw material phase of Y₂O₃ was observed when Eu³⁺ concentration was below 30 mol%. Scanning electron microscopy showed microwave assisted sintering results in smaller particle size and more uniform grain size distribution. In the photoluminescent (PL) studies, the concentration quenching effect was observed under the excitation at 393 nm, but not under the excitation at CTS band. The ⁵D₀→⁷F₂ transition (620 nm), exhibits a non-exponential decay behavior as YInGe₂O₇:Eu³⁺ powders were sintered by microwave with the Eu³⁺ concentration higher than 50 mol%.     

Spectral structure of barium–phosphate–silicate phosphor Ba10(PO4)4(SiO4)2:EuM+

The new apatite–silicate phosphor doped with Eu ions in Ba₁₀(PO₄)₄(SiO₄)₂ matrix was synthesized through solid-state reaction. It was found that the as-synthesized phosphor displayed apparent mixture of band and line emission peaks giving rise to pseudo white light. The narrow emission bands peaking at 410 nm can be assigned to the 4f⁶5d→4f⁷(⁸S_7/2) transition of Eu²⁺ ions, and the other band at 507 nm is ascribed to anomalous fluorescent emission. One group of line emission peaking at 595 nm and 613 m were due to the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transition of Eu³⁺ ions. The occurrence of photostimulated luminescence and discrete emission lines in violet (410 nm), green (507 nm) and red (595 nm and 613 nm) colors indicate that this material has potential application in fields of white-light-emitting.     

Novel EGCG assisted ultrasound synthesis of self-assembled Ca2SiO4:Eu3+ hierarchical superstructures: Photometric characteristics and LED applications

This paper reports for the first time ultrasound, EGCG assisted synthesis of pure and Eu³⁺ (1–5 mol%) activated Ca₂SiO₄ nanophosphors having self-assembled superstructures with high purity. The shape, size and morphology of the product were tuned by controlling influential parameters. It was found that morphology was highly dependent on EGCG concentration, sonication time, pH and sonication power. The probable formation mechanism for various hierarchical superstructures was proposed. The PL studies of Ca₂SiO₄:Eu³⁺ phosphors can be effectively excited by the near ultraviolet (UV) (396 nm) light and exhibited strong red emission around 613 nm, which was attributed to the Eu³⁺ (⁵D₀ → ⁷F₂) transition. The concentration quenching phenomenon was explained based on energy transfer between defect and Eu³⁺ ions, electron–phonon coupling and Eu³⁺–Eu³⁺ interaction. The Judd–Ofelt intensity parameters and radiative properties were estimated by using PL emission spectra. The photometric studies indicate that the obtained phosphors could be a promising red component for possible applications in the field of white light emitting diodes.     

Phase dependent photoluminescence and energy transfer in Ca2P2O7: Eu2+, Mn2+ phosphors for white LEDs

α- and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ phosphors were prepared by solid-state reaction. Phase transition from tetragonal (β-phase) to monoclinic (α-phase) is performed. A strong orange emission of Mn²⁺ is observed in both α-and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ upon near ultraviolet (UV) excitation through energy transfer from Eu²⁺ to Mn²⁺. The transfer efficiencies for various Mn²⁺ concentrations are estimated based on lifetime measurements of the fluorescence of Eu²⁺ in the two phases. The photoluminescence excitation spectra of α-Ca₂P₂O₇: Eu²⁺, Mn²⁺ can cover 400 nm of the near-UV range, denoting its potential use as a phosphor with intense orange component for white light emitting diodes (LEDs).     

Preparation and luminescence properties of Eu2+-doped BaSi2O5 glass-ceramics

We report on the preparation of Eu²⁺-doped BaSi₂O₅ glass-ceramics by crystallizing an Eu³⁺-doped barium-silicate glass at temperatures in the range from 750 to 1100 °C. Single phase BaSi₂O₅ glass ceramics can be obtained by thermal annealing at temperatures of about 950 °C. The luminescence intensity of Eu²⁺ increases dramatically if monoclinic BaSi₂O₅ is formed. Monoclinic Eu²⁺:BaSi₂O₅ shows efficient, broad band luminescence between 450 and 550 nm by excitation in the near UV. Annealing at temperatures >1000 °C leads to orthorhombic BaSi₂O₅ with much smaller Eu²⁺ luminescence. Static and time-resolved luminescence measurements indicate that Eu²⁺ ions are incorporated into the BaSi₂O₅ crystallites while Eu³⁺ ions remain in the amorphous phase.     

Sol-gel method and luminescence properties of the ZrO<Subscript>2</Subscript>:Eu<Superscript>3+</Superscript> phosphors with different charge compensation

Eu³⁺-doped ZrO₂ phosphors with different charge compensators (Li⁺, Na⁺, K⁺) were prepared by the sol-gel method. The properties of the as-obtained samples are characterized by X-ray diffraction, scanning electron microscope, photoluminescence spectra, and decay curve. The results show that ZrO₂:Eu³⁺ phosphors with different charge compensation are mixed phase of tetragonal and monoclinic phase, and the volume fraction of tetragonal phase of ZrO₂:Eu³⁺/Na⁺ phosphor is bigger than the other phosphors. The phosphors can emit strong red light at 606~616 nm (⁵D₀ → ⁷F₂) excited by ultraviolet light (395 nm). Compared with two charge compensation patterns in the ZrO₂:Eu³⁺, it has been found that ZrO₂:Eu³⁺ phosphors used Na⁺ as charge compensator show greatly enhanced red emission under 395 nm excitation and longer luminescence lifetime.     

100 MeV Si8+ ion induced luminescence and thermoluminescence of nanocrystalline Mg2SiO4:Eu3+

Nanoparticles of Mg₂SiO₄:Eu³⁺ have been prepared by the solution combustion technique and the grain size estimated by PXRD is found to be in the range 40–50 nm. Ionoluminescence (IL) studies of Mg₂SiO₄:Eu³⁺ pellets bombarded with 100 MeV Si⁸⁺ ions with fluences in the range 1.124–22.48×10¹² ions cm^?2 are carried out at IUAC, New Delhi, India. Five prominent IL bands with peaks at 580 nm, 590 nm, 612 nm, 655 nm and 705 nm are recorded. These characteristic emissions are attributed to the luminescence centers activated by Eu³⁺ cations. It is found that IL intensity decreases rapidly in the beginning. Later on, the intensity decreases slowly with further increase of ion fluence. The reduction in the ionoluminescence intensity with increase of ion fluence might be attributed to degradation of Si–O (ν₃) and Si–O (2ν₃) bonds present on the surface of the sample. The red emission with peak at 612 nm is due to characteristic emission of ⁵D₀→⁷F₂ of the Eu³⁺ cations. Thermoluminescence (TL) studies of Mg₂SiO₄:Eu³⁺ pellets bombarded with 100 MeV Si⁸⁺ cations with fluences in the range 5×10¹¹ ions cm^?2 to 5×10¹³ ions cm^?2 are made at RT. Two prominent and well resolved TL glows with peaks at ～220 °C and ～370 °C are observed. It is observed that TL intensity increases with increase of ion fluence. This might be due to creation of new traps during swift heavy ion irradiation.     

Dual color emitting Eu doped strontium orthosilicate phosphors synthesized by bio-template assisted ultrasound for solid state lightning and display applications

A novel Sr₂SiO₄:Eu (1–5 mol %) superstructures (SS) were synthesized using bio-sacrificial A.V. gel assisted ultrasound method. Powder X-ray diffraction patterns confirmed the presence of both α and β phase formation. It was evident that the morphological growth was highly reliant on A.V. gel concentration, sonication time, pH and sonication power. The formation mechanisms for different hierarchical SS were proposed. From diffuse reflectance spectra, the energy band gap was estimated and found to be ∼4.70–5.11 eV. The photoluminescence emission spectra for the excitation at 392 nm, shows characteristic emission peaks at 593, 613, 654 and 702 nm which were attributed to ⁵D₀ → ⁷F₀, ⁷F_1, ⁷F₂ and ⁷F₃ transitions of Eu³⁺ ions respectively. Conversely, when the samples were subjected to the heat treatment at 850 °C for 3 h under argon atmosphere, display an intense broad emission peak with two de-convoluted peaks at 490 and 550 nm due to 4f⁶5d¹→4f¹ (⁸S_7/2) transitions of Eu²⁺ ions. The concentration quenching phenomenon was discussed which attributes to energy transfer, electron–phonon coupling and ion–ion interaction. The Judd–Ofelt intensity parameters and other radiative properties were estimated by using emission spectra. The CIE chromaticity coordinate values of Sr₂SiO₄:Eu²⁺ and Eu³⁺ nanophosphors were located in green and red regions respectively. The calculated CCT and CRI values specify that the present phosphor can be fairly useful for both green and red components of white LED’s. Luminescence decay and quantum yield suggest the suitability of this phosphor as an efficient luminescent medium for light emitting diodes. Overall, the results elucidated a rapid, environmentally benign, cost-effective and convenient method for Sr₂SiO₄:Eu³⁺ synthesis and for the possible applications such as solid state lighting and display devices.     

The unusual variations of photoluminescence and afterglow properties in monoclinic ZrO2 by annealing

The raw ZrO₂ is annealed at 600–1550 °C for 6 h. It is found that the emission at 492 nm increases greatly when the annealing temperature is higher than 1200 °C and its afterglow shows a small improvement at 1200–1450 °C and a large enhancement after annealing at 1550 °C. The results that are obtained indicate that the impurity Ti⁴⁺ in ZrO₂ is efficiently reduced to Ti³⁺ when the temperature is higher than 1200 °C, and the increase of Ti³⁺ centers contributes to the large improvement of emission at 492 nm. The thermoluminescence shows that at least two types of traps with different depths (0.65 eV and 1.46 eV) corresponding to oxygen vacancies exist in monoclinic ZrO₂. After annealing at 1200–1450 °C, some new trap clusters related to oxygen vacancies and Ti³⁺ form and causes the small improvement of afterglow at 1200–1450 °C. The large improvement of afterglow after annealing at 1550 °C originates from the sharp increase of proper shallow traps (0.65 eV) in ZrO₂. Accordingly, we present the feasible interpretations and luminescence mechanisms of monoclinic ZrO₂ for our observations.     

Effect of Sr2+-doping on structure and luminescence properties of BaAl2Si2O8:Eu2+ phosphors

Sr²⁺ doped BaAl₂Si₂O₈:Eu²⁺ phosphor was synthesized by chemical co-precipitation method. With the increase of Sr²⁺ concentration, the phase structure of (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ changes from hexagonal phase to monoclinic phase owing to large activation energy in SrAl₂Si₂O₈ system. (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ phosphor exhibits a broad blue band peaking at 425 nm due to the 4f⁶5d–4f⁷(⁸S_7/2) transition of Eu²⁺ ions. The emission intensity increases, accompanied by the blue shift of emission maximum from 459 to 417 nm with the Sr²⁺ doping concentration increasing. The optimal concentration of Sr²⁺ ion is 40%, and the phosphor shows high color stability in CIE chromaticity diagram. The result indicates that Sr²⁺ doped phosphor not only can enhance the relative intensity but also can adjust the chromaticity coordinate.     

Development of zeolite-derived novel aluminosilicate phosphors

In this research, zeolite-derived aluminosilicate phosphors were synthesized through the ion exchange route. Red light-emitting property of Eu³⁺-doped aluminosilicate phosphors were discussed from a view point of the Eu content, heat-treatment condition and the oxidation state of Eu ions. The crystalline phase of the host aluminosilicates could be successfully controlled as designed based on the published NaAlO₂–SiO₂ binary phase diagram. Orange-red emission peaks derived from the ⁵D₀→⁷F_j (j=0, 1, 2, 3, 4) transition of Eu³⁺ were observed around 590–700 nm, and 4f⁶5d→4f⁷ transition of Eu²⁺ was observed at around 400–500 nm. The relative intensity I(⁵D₀→⁷F₂) of the dominant emission peak at 612 nm increased consistently with the Eu content. The results of the XANES spectroscopy analysis revealed that Eu²⁺ ion in the 1400 °C as heat-treated host aluminosilicate were successfully converted to Eu³⁺ by the additional annealing at 1100 °C. The Eu contents and heat-treatment conditions were determined to exhibit the best performance as a red phosphor, which were 10 wt% and 1500 °C, respectively     

Photoluminescence properties of red-emitting phosphors Ln3BWO9:Eu3+ (Ln=Y,La, Gd)

Undoped and Eu³⁺ activated Ln₃BWO₉ (Ln=Y, La, Gd) were prepared by the Pechini method and characterized with X-ray diffraction (XRD) and ultraviolet (UV) spectroscopy. All the samples have the hexagonal phase after heat treatment in the range of 850–1000 °C. The Eu³⁺ doped samples emit high-purity red light with peak maximum at about 617 nm under excitation of UV light (～285 nm) at room temperature. When the doping concentration of Eu³⁺ is about 20–30%, luminescence intensity reaches the maximum. Luminescence decay curves indicate that Ln₃BWO₉:Eu³⁺ exhibits a fast decay time of about 0.5 ms. A possible luminescence mechanism has also been proposed. It is worth noting that both the absorption of host lattice and the charge transfer (CT) transition of Eu³⁺ are of great importance to the promising luminescent performance of Ln₃BWO₉:Eu³⁺.     

Synthesis and photoluminescence properties of YVO4:Eu3+, Al3+ phosphor

The Y_0.95?xAl_xVO₄:5%Eu³⁺ (0≤x≤0.1) phosphors were successfully synthesized by solid state reaction at 900 °C for 6 h, and their luminescence properties were investigated under UV and VUV excitation. Monitoring at 619 nm, a strong broad absorption was enhanced by co-doping of Al³⁺ into the YVO₄:Eu³⁺ lattices at 256 nm under UV excitation. The VUV excitation spectra also showed the enhanced excitation bands at about 156 and 200 nm. Under 254 or 147 nm excitation, it was found that Y_0.95?xAl_xVO₄:Eu³⁺(0≤x≤0.1) phosphors showed strong red emission at about 619 nm corresponding to the electric dipole ⁵D₀^–7F₂ transition of Eu³⁺. The improvement of luminescence intensity of YVO₄:Eu³⁺ was also observed after partial substituting Y³⁺ by Al³⁺ and the optimal luminescence intensity appeared with incorporation of 2.5 mol% Al³⁺.     

Effect of Na+ co-dopant and activator concentration on luminescent properties of CaGa4O7:Eu3+

Two series of calcium gallate phosphors: Ca_1?xEu_xGa₄O₇ and Ca_1?2xEu_xNa_xGa₄O₇ (x=0, 0.002, 0.01, 0.02, 0.03, 0.05) were synthesized by a modified Pechini method and their optical properties at 298 and 77 K were investigated. In undoped CaGa₄O₇ upon 255 nm excitation a bluish white emission (λ_max=500 nm) followed by an afterglow of the same color lasting for 10–20 s was observed. Eu³⁺-doping quenched the host-related luminescence and the characteristic red emission of the dopant with maximum at 613 nm appeared. Its excitation spectrum consisted of a broad band assigned to ligand to metal, O^2?→Eu³⁺, charge transfer absorption and narrow lines arising from intraconfigurational transitions within the 4f⁶ states of Eu³⁺ ion. The effects of Eu³⁺ concentration and Na⁺ co-doping on the luminescence properties and decay kinetics were studied. Low temperature emission spectra showed that Eu³⁺ ions are positioned in environments of different symmetries. Their relative populations changed with the activator content. Co-doping with Na⁺ ions led to a remarkable reduction of the number of Eu³⁺ sites as well as to noticeable improvement of the luminescence brightness though it did not affect the decay time of the emission. The quantum efficiencies of singly doped CaGa₄O₇:Eu³⁺ were very low (in the range of 1–3.7%). Na⁺ co-doping improved this parameter leading to the highest efficiency of 11% for CaGa₄O₇:3%Eu³⁺,3%Na⁺.     

Blue emission in Eu2+ activated MgXAl10O17 (X = Sr,Ca) phosphors

Here we reported photoluminescence properties of Eu²⁺ activated in novel and existing MgXAl₁₀O₁₇ (X = Sr, Ca) phosphor which has been prepared by combustion synthesis at 550 °C under UV and near UV excitation wavelength. The PL emission properties of MgSrAl₁₀O₁₇:Eu²⁺ were monitored at 254 nm and 354 nm respectively keeping emission wavelength at 469 nm. Whereas novel MgCaAl₁₀O₁₇:Eu²⁺ exhibit emission band at 452 nm keeping excitation at 378 nm. These blue emission corresponds to 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ions. Further phosphor was analyzed by XRD for the confirmation of desired phase and purity.     

Solvent and surfactant effect on the self-assembly and luminescence properties of ZrO2:Eu3+ nanoparticles

ZrO₂:Eu³⁺ nanocrystals ranging from 17 to 43 nm were prepared by the facile precipitation method with a hydrothermal process. The crystallite size was strongly influenced by the solvent composition and enhanced with the presence of surfactant. The use of ethanol combined with surfactant stabilizes 50 wt% of the monoclinic phase, while the use of water only results in 100 wt% tetragonal phase. 80% of nanobelts were obtained preparing the sample with ethanol and surfactant as a results of the self-assembly of nanoparticles. The photoluminescence emission peak centered at 606 nm dominates the emission band for nanobelts, while for nanoparticles it is dominated by a peak centered at 612 nm. Such differences were explained in terms of the site symmetry occupying Eu³⁺ in the host that in turn depends on the crystalline phase. Changes in the intensity ratio I(612 nm)/I(606 nm) is proposed as a tool to analyzing changes in the monoclinic/tetragonal phase composition. The calculated asymmetry ratio R=⁷F₂/⁷F₁～1.2 suggest a high degree of crystallinity of the prepared samples.     

Sol–gel synthesis and optical improvement of novel red-emitting [LiY(1−x)Eux][MoyW(1−y)O4]2 powder for white LED applications

In this work, we report on sol–gel synthesis of red-emitting [LiY_0.88Eu_0.12] [Mo_0.1W_0.9O₄]₂ phosphor and its luminescent properties at room temperature. X-ray diffraction patterns indicate that it presents one main phase with a tetragonal (space group I4₁/a (88)) structure. Luminescent spectra show that the main emission peaks lies at 613.2 nm and 616.2 nm deriving from ⁵D₀→⁷F₂ transition peak splitting due to Mo⁶⁺ and W⁶⁺ concentration waving in the host. All those exhibit the excellent prospect in light emitting diodes application in the future.