La掺杂在BiOBr光催化剂氧化和还原性能调控中的不同作用

同时使用有机溴源十六烷基三甲基溴化铵（CTAB）和无机溴源NaBr,通过溶剂热法合成了具有层状类囊体结构的La掺杂BiOBr光催化剂。通过第一性原理（DFT）计算了La掺杂对BiOBr能带结构的影响。采用X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱及荧光光谱对催化剂进行了表征。在可见光照射下,以光催化降解酸性橙Ⅱ和氨氮废水测试了La-BiOBr的氧化性能;以亚甲基蓝为还原指示剂,测试了La-BiOBr的还原性能。研究表明,La的掺杂可以促进晶粒的堆积。而且BiOBr的氧化性能和还原性能分别被促进和抑制,即La的掺杂促进了BiOBr光催化剂的氧化性能,抑制了其还原性能。     

La掺杂在BiOBr光催化剂氧化和还原性能调控中的不同作用（英文）

同时使用有机溴源十六烷基三甲基溴化铵(CTAB)和无机溴源NaBr,通过溶剂热法合成了具有层状类囊体结构的La掺杂BiOBr光催化剂。通过第一性原理(DFT)计算了La掺杂对BiOBr能带结构的影响。采用X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱及荧光光谱对催化剂进行了表征。在可见光照射下,以光催化降解酸性橙Ⅱ和氨氮废水测试了LaBiOBr的氧化性能;以亚甲基蓝为还原指示剂,测试了La-BiOBr的还原性能。研究表明,La的掺杂可以促进晶粒的堆积。而且BiOBr的氧化性能和还原性能分别被促进和抑制,即La的掺杂促进了BiOBr光催化剂的氧化性能,抑制了其还原性能。     

氮掺杂还原氧化石墨烯/四氧化三钴双功能催化剂的制备及表征

采用尿素作为氮源,通过热退火法制备氮掺杂还原氧化石墨烯,然后以乙酰丙酮钴作为钴源通过水热法制备氮掺杂还原氧化石墨烯/四氧化三钴杂化纳米片作为催化氧还原和氧析出反应的双功能催化剂。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线电子能谱仪(XPS)等对其进行形貌结构表征,通过旋转圆盘电极等电化学测试对其电催化性能进行分析,可以看出该催化剂具有良好的氧还原和氧析出催化性能。     

铜,硫掺杂对铁氮碳氧还原催化剂性能的提升作用

采用FeCl₃·6H₂O，Cu（NO₃）₂·3H₂O，KSCN，氧化BP-2000和三聚氰胺分别作为铁源、铜源、硫源、碳源和氮源，制备了一系列非贵金属氧还原电催化剂.通过透射电子显微镜、X射线粉末衍射、X射线光电子能谱和电感耦合等离子体原子发射光谱等表征了催化剂的形貌和结构，并通过旋转圆盘和旋转环盘测试研究了催化剂的性能，分析了铜，硫掺杂对于催化剂性能的提升作用.结果表明，与铜掺杂相比，硫掺杂能更大幅度地提高催化剂的周转率（TOF），并有效降低过氧化氢产率；同时铜，硫双掺杂的催化剂具有更高的TOF和更低的过氧化氢产率.     

BiOBr的可控制备及对废水中卡马西平的有效降解

以Bi(NO₃)₃·5H₂O为原料, 乙醇为介质, KBr和/或十六烷基三甲基溴化铵(CTAB)为溴源, 采用溶剂热法合成了不同结构和性能的BiOBr微纳米材料, 通过 X射线衍射仪(XRD)、 扫描电子显微镜(SEM)、 红外光谱仪(FTIR)、 紫外-可见漫反射光谱(UV-Vis DRS)及比表面积和孔隙度分析仪对产物进行了表征. 结果表明, 溴源(KBr, CTAB)对BiOBr的结晶特性和形貌有重要影响, 其中采用双溴源且KBr与CTAB摩尔比为3∶7时制得的BiOBr(K∶C=3∶7)光催化剂在模拟太阳光下具有最优的光催化性能, 光照20 min后对废水中卡马西平的降解速率常数是以KBr为溴源制备的BiOBr(K)的4.10倍和以CTAB为溴源制备的BiOBr(C)的2.14倍. BiOBr(K∶C=3∶7)优异的光催化活性可归因于其高暴露的(110)晶面、 表面羟基、 疏松的片层状形貌及较大的比表面积和孔体积. 活性物种淬灭实验结果表明, BiOBr(K∶C=3∶7)的光催化活性主要源于光生空穴、 羟基自由基和电子.     

溴氧化铋/石墨烯可见光下光催化氧化脱硫的研究

采用水热法制备了BiOBr/石墨光催化剂, 并利用X 射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）、固体荧光（PL）和紫外-可见漫反射光谱（UV-vis DRS）等方法对其进行表征。以二苯并噻吩的环己烷溶液为模拟油品,考察反应温度、石墨烯负载量和氧化剂H₂O₂用量等条件对BiOBr/石墨光催化氧化脱除模拟油中DBT的性能的影响,不同模型化合物的光催化活性为DBT>4, 6-DMDBT>BT,根据实验结果提出了BiOBr/石墨光催化剂氧化DBT的机理。     

原位构筑溴氧化铋/聚吡咯复合材料用于光催化降解阴离子染料

采用光化学反应法在稀酸条件下制备出薄片状溴氧化铋（BiOBr）,将其分散于含有过硫酸铵和十六烷基三甲基溴化铵的水溶液中,通过吡咯的一步聚合反应原位制备出聚吡咯（PPy）修饰的BiOBr复合材料（BiOBr/PPy）。通过扫描电子显微镜、透射电子显微镜、X射线衍射、拉曼光谱、X射线光电子能谱、紫外可见光谱及荧光光谱等综合表征技术对样品的晶体结构、形貌特征和光电特性等进行测试。结果显示,PPy成功修饰到BiOBr薄片上,BiOBr与PPy接触紧密且相互作用强。与纯BiOBr相比,BiOBr/PPy复合材料具有更强的可见光吸收效率和增强的光催化降解甲基橙（MO）染料活性。通过优化PPy和BiOBr的组合比例,当BiOBr质量分数约为7%时,BiOBr/PPy-2在50 min内对MO （30 mg·L^-1）的降解率为87.3%;另外,循环光催化活性虽有降低但仍高于纯BiOBr和纯PPy （10.4%）。这表明BiOBr与PPy之间较强的相互作用和良好的界面结合可以有效地促进光生电子与空穴的分离效率。反应体系中分离的光生空穴、衍生自由基在染料氧化降解中发挥了重要作用。     

Bi含量对溴氧化铋光催化性能的影响

采用水热法和溶剂热法制备BiOBr、Bi3O4Br和Bi4O5Br2三种光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)与紫外-可见漫反射光谱(UV-vis DRS)表征光催化剂的晶体结构、表面形貌和光学性能,利用密度泛函理论计算光催化剂的能带结构和态密度,在可见光照射下,通过降...     

不同溴源制备铁掺杂BiOBr及其可见光光催化活性研究

采用不同溴源制备铁改性溴氧化铋(Fe-BiOBr)并结合X-射线衍射、X射线光电子能谱、扫描电镜、紫外可见漫反射和荧光分光光度计对催化剂进行表征。发现以NaBr作溴源能成功得到Fe掺杂BiOBr,Fe进入BiOBr晶格内部形成了Bi-O-Fe或Br-O-Fe键,Fe含量约为0.20(Fe与Bi原子比),禁带宽度为1.92 eV。相同制备条件下以CTAB为溴源只能得到单纯的BiOBr,禁带宽度为2.78 eV,按其含Fe量将两种溴源制备的BiOBr分别命名为Fe0.2-BiOBr和Fe0-BiOBr。在可见光下(λ≥420 nm)降解罗丹明B发现Fe0.2-BiOBr具有更优越的可见光活性。结合电子自旋共振及自由基捕获等实验,推测Fe 3d轨道参与了BiOBr的价带和导带形成,使其禁带宽度减少,电子空穴复合率降低,其光催化氧化机理主要涉及超氧自由基(O2??)。     

有序介孔三氧化二铟/还原氧化石墨烯纳米复合材料的制备及可见光催化性能

以有序介孔三氧化二铟(m-In2O3)和还原氧化石墨烯(RGO)为原料,采用紫外光照射法合成了介孔三氧化二铟/还原氧化石墨烯(m-In2O3-RGO)复合光催化剂.利用N2吸附-脱附、X射线衍射(XRD)、透射电子显微镜(TEM)、漫反射吸收光谱(DRS)和光电流测试等手段对样品进行表征.在可见光照射下,以对氯苯酚(4-CP)为目标污染物,考察了m-In2O3-RGO光催化剂的催化性能.结果表明,m-In2O3-RGO光催化剂具有完整的晶型和规则的孔道结构,有利于光生电子和空穴的分离.同时,作为固态电子受体与传输体的RGO促进了光生电子-空穴对的传输和分离,有效提高了可见光催化性能.掺杂2%(质量分数)RGO的复合光催化剂性能最佳,4 h可将4-CP降解96%以上,催化剂经多次循环使用后,其光催化活性基本保持不变.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Investigation of Kinetics of Solid-Phase Synthesis of Lithium Orthosilicate

The kinetics of the interaction between lithium carbonate and silica with various degrees of dispersion was investigated by TG and DTA methods. It was found that the utilization of pyrogenic silica with a specific surface area of about 300 m²g^-1 instead of aerosil with one of 175 m²g^-1 leads to an increase of the reaction rate between lithium carbonate and silica, which depends on the formation and growth of lithium orthosilicate crystals in the first stage, and is conditioned by the diffusion of lithium and oxygen ions through the lithium orthosilicate layer formed at temperatures above 800 K. This supposition is supported by the kinetic analysis results obtained with the use of the different models. The optimal regime of heating is recommended. This revised version was published online in July 2006 with corrections to the Cover Date.     

小环化合物中饱和碳质子化学位移的计算

小环化合物由于其张力、构型、构象和各向异性效应等原因,环碳上质子化学位移缺乏规律性,难以预测,对此作者曾提出一种近似算法。本文根据303种小环化合物中饱和碳质子的化学位移实验数据,将适于计算这类质子化学位移的公式表述为:     

解决能源问题的新途径--光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。