Luminescence and evaluation of trapping parameters in NaMgSO4Cl: X (X=Cu or Ce) phosphor

Thermoluminescence (TL) characteristics of recently developed high sensitive mixed halosulphate phosphors, NaMgSO₄Cl: Cu and NaMgSO₄Cl: Ce were studied in comparison with CaSO₄: Dy in order to assess the possibility of their use in personal monitoring and TLD phosphors at very low dose of 5 Gy. It was found that NaMgSO₄Cl: Cu is 5.59 times and NaMgSO₄Cl: Ce is 6.18 times more sensitive as compared to standard CaSO₄: Dy. UV photo-excited luminescence from Cu to Ce doped NaMgSO₄Cl halosulphate phosphors has been investigated. The intense emission of the spectrum is assigned to electronic transitions 3d⁹4s¹→3d¹⁰ in monovalent copper ion and 5d→4f in Ce³⁺ ions. Increase in PL peak intensity suggesting that Cu and Ce play an important role in PL emission in the present matrix. These phosphors were synthesized by the wet chemical method. XRD, photoluminescence (PL) and thermoluminescence (TL) characterization of phosphors has been reported in this paper. The preparation of an inexpensive and high sensitive NaMgSO₄Cl: Cu and NaMgSO₄Cl: Ce with TL glow peaks for different concentrations are observed between 160 and 195 °C and between 200 and 225 °C, respectively, exposed to gamma-rays of ⁶⁰Co for their thermoluminescence (TL) properties. The glow curves have been recorded at a heating rate of 2 K s^?1 and irradiated at a dose rate of 0.995 kGy h^?1 for 5 Gy. In present study the trapping parameters such as order of kinetics (b), activation energy (E) and frequency factors (s) have been calculated for the 195 and 200 °C glow peaks of NaMgSO₄Cl: Cu and NaMgSO₄Cl: Ce, respectively by using Chen's method. The paper discusses the luminescence of Cu⁺ and Ce³⁺ by simple method of incorporation in NaMgSO₄Cl host.     

Cold and warm white light generation using Zn(PO3)2 glasses activated by Ce3+, Dy3+ and Mn2+

The photoluminescence of zinc metaphosphate glasses activated by Dy³⁺, Ce³⁺/Dy³⁺ and Ce³⁺/Dy³⁺/Mn²⁺ ions was investigated. Non-radiative energy transfers from Ce³⁺ to Dy³⁺ and Ce³⁺ to Mn²⁺ are observed upon 280 nm excitation. The non-radiative nature of these transfers is inferred from the increase in the decay rate of the Ce³⁺ emission when the glass is co-doped with Dy³⁺ or Dy³⁺/Mn²⁺. It is demonstrated that zinc metaphosphate glasses can generate cold or warm white light emission when they are doped with Ce³⁺/Dy³⁺ or Ce³⁺/Dy³⁺/Mn²⁺ and pumped at 280 nm (peak emission wavelength of AlGaN-based LEDs). The CIE1931 chromaticity coordinates and color temperature were (0.34, 0.35) and 5250 K for the cold light, and (0.47, 0.43) and 2700 K for the warm light.     

Thermoluminescence response in gamma and UV irradiated Dy2O3 nanophosphor

Low temperature solution combustion method was employed to synthesize Dy₂O₃ nanophosphors using two different fuels (sugar and oxalyl dihydrazine (ODH)). Powder X-ray diffraction confirm pure cubic phase and the estimated particle size from Scherrer's method in sugar and ODH fuel was found to be 26 and 78 nm, respectively, and are in close agreement with those obtained using TEM and W–H plot analysis. SEM micrographs reveal porous, irregular shaped particles with large agglomeration in both the fuels. An optical band gap of 5.24 eV and 5.46 eV was observed for Dy₂O₃ for sugar and ODH fuels, respectively. The blueshift observed in sugar fuel is attributed to the particles size effect. Thermoluminescence (TL) response of cubic Dy₂O₃ nanophosphors prepared by both fuels was examined using gamma and UV radiations. The thermoluminescence of sugar used samples shows a single glow peak at 377 °C for 1–4 kGy gamma irradiations. When dose is increased to 5 kGy, two more shouldered peaks were observed at 245 and 310 °C. However, in TL of ODH used samples, a single glow peak at 376 °C was observed. It is observed that TL intensity is found to be more in sugar used samples. In UV irradiated samples a single glow peak at 365 °C was recorded in both the fuels with a little variation in TL intensity. The trapping parameters were estimated by different methods and the results are discussed.     

Reduction of thin-film ceria on Pt(111) by supported Pd nanoparticles probed with resonant photoemission

Local defects present in CeO_2 ? x films result in a mixture of Ce³⁺ and Ce⁴⁺ oxidation states. Previous studies of the Ce 3d region with XPS have shown that depositing metal nanoparticles on ceria films causes further reduction, with an increase in Ce³⁺ concentration. Here, we compare the use of XPS and resonant photoemission spectroscopy (RESPES) to estimate the concentration of Ce³⁺ and Ce⁴⁺ in CeO_2 ? x films grown on Pt (111), and the variation of this concentration as a function of Pd deposition. Due to the nature of the electronic structure of CeO_2 ? x, resonant peaks are observed for the 4d–4f transitions when the photon energy matches the resonant energy; (hν = 121.0 eV) for Ce³⁺ and (hν = 124.5 eV) for Ce⁴⁺. This results in two discrete resonant photoemission peaks in valence band spectra. The ratio of the difference of these peaks with off-resonance scans gives an indication of the relative contribution of Ce³⁺. Results from RESPES indicate reduction of CeO_2 ? x on deposition of Pd, confirming earlier findings from XPS studies.     

Luminescence and defect studies of YAlO3:Dy3+, Sm3+ single crystals exposed to 100 MeV Si7+ ion beam

Ionoluminescence (IL) and photoluminescence (PL) spectra for different rare earth ions (Sm³⁺ and Dy³⁺) activated YAlO₃ single crystals have been induced with 100 MeV Si⁷⁺ ions with fluence of 7.81×10¹² ions cm^?2. Prominent IL and PL emission peaks in the range 550–725 nm in Sm³⁺ and 482–574 nm in Dy³⁺ were recorded. Variation of IL intensity in Dy³⁺ doped YAlO₃ single crystals was studied in the fluence range 7.81×10¹²–11.71×10¹² ions cm^?2. IL intensity is found to be high in lower ion fluences and it decreases with increase in ion fluence due to thermal quenching as a result of an increase in the sample temperature caused by ion beam irradiation. Thermoluminescence (TL) spectra were recorded for fluence of 5.2×10¹² ions cm^?2 on pure and doped crystals at a warming rate of 5 °C s^?1 at room temperature. Pure crystals show two glow peaks at 232 (Tg₁) and 328 °C (Tg₂). However, in Sm³⁺ doped crystals three glow peaks at 278 (Tg₁), 332 (Tg₂) and 384 °C (Tg₃) and two glow peaks at 278 (Tg₁) and 331 °C (Tg₂) in Dy³⁺ was recorded. The kinetic parameters (E, b s) were estimated using glow peak shape method. The decay of IL intensity was explained by excitation spike model.     

Study of TL properties of LaAlO3:Ce,Dy crystals for UV dosimetry

Thermoluminescence properties of lanthanum aluminum oxide (LaAlO₃) crystals doped with optically active rare earth ions have been investigated for ultraviolet dosimetry purposes. Single crystals co-doped with 5.0 at.% of Ce³⁺ and 1.0 at.% of Dy³⁺ ions have two thermoluminescent (TL) peaks at 151 °C and 213 °C which can be sensitized after 1 h of UV exposure. The material shows very high TL output and linear response for UV spectral irradiance ranging from 0.04 to 1.20 mJ cm⁻², that corresponds to 10 times the TL response of the Al₂O₃:C oxides. From 0.62 to 148.0 mJ cm⁻² the dependence is linear with the logarithm of the spectral irradiance. The investigation demonstrates that LaAlO₃:Ce,Dy crystals are very attractive to be investigated as UV dosimeters.     

Thermoluminescence studies of thermally treated CaB4O7:Dy

Borate based thermoluminescence dosimeters (TLD) show high sensitivity and good TL characteristics. One of the promising material amongst the dosimeters is Dy doped CaB₄O₇. Spectrally resolved thermoluminescence of Dy doped CaB₄O₇ shows three glow peaks at about 50 °C, 240 °C and 380 °C, the intensity of the 240 °C glow peak being the maximum. All TL experiments were conducted on a high sensitivity TL spectrometer at Sussex University with a heating rate of 50 °C min^?1. Two main emissions associated with the Dy dopant are observed at ～480 and 580 nm. The samples were subjected to a series of treatments including excitation by X-rays and UV laser radiation. As part of the present research CaB₄O₇:Dy materials were subjected to two different heat treatments; quenching and slow cooling in order to investigate the changes in TL characteristics.     

5D0→7F1 and 5D0→7F2 transition in europium doped halosulphates for mercury-free lamps

Polycrystalline Na₃SO₄F:Eu and NaMgSO₄F:Eu halosulphate phosphors prepared by a wet chemical method have been studied for its photoluminescence (PL) and thermoluminescence (TL) characteristics. Two well resolved peaks are observed at 593 nm and 614 nm, which are assigned to due to ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions of Eu³⁺ ions. TL is observed at temperatures between 100 °C and 300 °C. In this paper, we report PL emission spectra of Eu³⁺ and TL glow curves, which are more sensitive than the standard TLD-CaSO₄:Dy. The presented phosphors are applicable for the mercury free lamps and solid state lighting devices.     

Luminescence and Scintillation Characterization of Cs2NaGdBr6: Ce3+ Single Crystal

Luminescence and scintillation properties of newly discovered bromo-elpasolites Cs₂NaGdBr₆: Ce³⁺ (CNGB: Ce³⁺) are presented. Single crystals of CNGB: Ce³⁺ with dimensions up to Ø7×10 mm³ are successfully grown by the Bridgman technique. X-ray excited luminescence measurements of the grown samples showed a broad emission band in the wavelength range from 365 to 470 nm. It offered an energy resolution of 5.1% (FWHM) at 662 keV for 10% Ce sample. The light output of the investigated samples increases along with cerium concentration. A maximum light yield of ～36,800 ph/MeV is measured for the 10% Ce sample crystal. Under γ-ray excitation, CNGB: Ce³⁺ crystals showed three exponential decay time components. The scintillation mechanism in the sample crystal is presented.     

Zinc silicates with tunable morphology by surfactant assisted sonochemical route suitable for NUV excitable white light emitting diodes

The cationic surfactants assisted ultrasound route was used to prepare Dy³⁺ doped Zn₂SiO₄ nanophosphors. The final products were characterized by powder X-ray diffraction (PXRD), ultraviolet visible spectroscopy, scanning electron microscopy, transmission electron microscopy and photoluminescence. Orthorhombic phase of Zn₂SiO₄:Dy³⁺ (JCPDS card No. 35-1485) was confirmed from PXRD. It was evident that the morphology of spherical and broom like structures were obtained with epigallocatechin gallate (EGCG) and cetyltrimethylammonium bromide (CTAB) surfactants respectively. Further the size and agglomeration of the products were varied with surfactants concentration, sonication time, pH and sonication power. The probable formation mechanisms to obtain various micro/nano superstructures were discussed. The characteristic PL peaks were observed at 484, 574 and 666 nm due to the electronic transitions ⁴F_9/2 → ⁶H_j (j = 15/2, 13/2, 11/2) of Dy³⁺ ions upon excited at NUV pumping wavelength of 350 nm [⁶H_15/2 → ⁶P_7/2 (⁴M_15/2)]. The Judd–Ofelt intensity parameters and radiative properties were estimated by using PL emission data. The photometric studies indicated that the obtained phosphors could be promising materials in white light emitting diodes (wLED’s). The present synthesis route was rapid, environmentally benign, cost-effective and useful for industrial applications such as solid state lighting and display devices.     

White LED based on nano-YAG:Ce3+/YAG:Ce3+,Gd3+ hybrid phosphors

Nano-YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺ phosphors were synthesized by glycothermal method. The X-ray diffraction (XRD) measurements showed that the samples can be well-crystallized at 600 °C. The transition electron microscope (TEM) showed that the particles have sizes mostly in the range between 35 and 100 nm. The YAG:Ce nano-phosphor had a wide emission band ranging from blue to yellow peaking at 532 nm, due to the transition from the lowest 5d band to ²F_7/2, ²F_5/2 states of the Ce³⁺ ion. Red-shift of emission peak wavelength from 532 nm to 568 nm has been achieved as doping Gd³⁺ ions into the YAG:Ce³⁺ to substitute some Y³⁺ ions. White LEDs were fabricated by combining GaN (460 nm) chip with the YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺. Color rendering index of the white LED as a function of the ratios of theses two kinds of phosphors was studied. As the ratio of YAG:Ce³⁺,Gd³⁺ phosphor increased, the color rendering index of the LED improved significantly under the forward bias of 20 mA. As the ratio of YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺ was 11:9, the white LED had a color rendering index, CIE chromaticity coordinates and color temperature T_c of 85, (0.3116, 0.3202) and 6564 K, respectively.     

The influence of some processing conditions on host crystal structure and phosphorescence properties of SrAl2O4:Eu2+, Dy3+ nanoparticle pigments synthesized by combustion technique

The spectroscopic and host phase properties of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors with a series of different initiating combustion temperature, urea concentration as a fuel and critical pH of precursor solution are investigated. The SrAl₂O₄:Eu²⁺, Dy³⁺ nanoparticle pigments were obtained by exothermic combustion process within less than 5 min. The sample that ignited at initiating combustion temperature of 600 °C exhibits highest intensity emission peak at 517 nm in which the SrAl₂O₄ host phase has the maximum fraction of monoclinic SrAl₂O₄ phase. The excitation spectra consist of 240 and 254 nm broad peaks. The experimental results show that the optimum ratio of urea is 2.5 times higher than theoretical quantities for best emission condition of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphor particles. The critical pH was obtained about 5.2. The crystallite size of these pigments is about 40 nm before thermal treatment and 62 nm after thermal treatment, respectively.     

Conversion of ultraviolet and infrared to visible light in Er3+ and Dy3+ co-doped CsGd2F7

The CsGd₂F₇ crystal co-doped with 1 at% Er³⁺ and 0.2 at% Dy³⁺ ions was studied using the excitation of both synchrotron radiation and 355 nm laser. All the emission bands were assigned by using the Dieke diagram together with the conclusions from relaxation kinetics studies. The onset of the 4f–5d transition bands and the centers of charge transfer bands were also calculated for the lanthanide series CsLn₂F₇ and the results were used to assign the bands and peaks in the excitation spectra. The energy transfer and relaxation processes in CsGd₂F₇ were thoroughly analyzed. Quantum cutting downconversion of one vacuum ultraviolet to two visible photons was realized under 154 nm excitation. Upconverted green emission was observed under 980 nm excitation.     

TL and OSL studies on lithium borate single crystals doped with Cu and Ag

Lithium borate (LBO) single crystals doped with Cu and Ag (0.25 mol% each) (Li₂B₄O₇:Cu,Ag) are grown by the Czochralski method. The thermoluminescence readout on Li₂B₄O₇:Cu,Ag crystals showed three glow peaks at～375, 441 and 516 K for the heating rate of 1  K/s. The thermoluminescence sensitivity of the grown Li₂B₄O₇:Cu,Ag single crystals is found to be 5 times TLD-100 and a linear dose response in the range 1 mGy to 1 kGy. The glow curve deconvolution reveals nearly first order kinetics for all the three peaks with trap depths 0.77, 1.25 and 1.34 eV respectively and corresponding frequency factors 1.6×10⁹, 1.3×10¹³ and 6.8×10¹¹ s^?1. The continuous wave optically stimulated luminescence (CW-OSL) measurements were performed on the LBO:Cu,Ag single crystals using blue light stimulation. The traps responsible for the three thermoluminescence peaks in Li₂B₄O₇:Cu,Ag are found to be OSL sensitive. The qualitative correlation between TL peaks and CW-OSL response is established. The photoluminescence studies show that in case of co-doping of Ag in LBO:Cu the emission at 370 nm in Cu states dominates over the transitions in Ag states implying doping of Ag plays a role as sensitizer when co-doped with Cu and increases overall emission.     

Mechanisms for Ce3+ excitation at energies below the zero-phonon line in YAG crystals and nanocrystals

Excitation of YAG:Ce³⁺ crystals and nanocrystals was performed at λ_exc=473–584 nm over a wide temperature range. It was observed that the luminescence of both nano- and single-crystal YAG:Ce samples is efficiently excited with photon energies well below the Ce³⁺ absorption band and at least 1650 cm^?1 below the ZPL of the 4f¹(²F_5/2)?4f⁰5d¹ transition, located at 489 nm. The studies of Ce³⁺ fluorescence spectra as a function of temperature and excitation wavelength and of their temporal evolution point to the role of phonon-assisted nonradiative energy transfer between different groups of Ce³⁺ centers in the excitation mechanism.     

Mid-infrared photo-luminescence and energy transfer around 2.8 μm from Dy3+/Tm3+ co-doped tellurite glass

Tellurite glasses co-doped with Dy³⁺ and Dy³⁺/Tm³⁺ have been synthesized. Emission around 2.8 μm is successfully obtained in present glass upon excitation of a conventional 808 nm laser diode. Judd-Ofelt intensity parameters and radiative properties of Dy³⁺ ions are calculated using the Judd-Ofelt theory. The luminescence characteristics and energy transfer mechanism are investigated and discussed. According to the absorption, fluorescence spectra and lifetime measurements, Tm³⁺ ions can effectively absorb excitation and transfer their energy to Dy³⁺ ions with high efficiency (up to 86.80%). Hence, the results demonstrate that Dy³⁺/Tm³⁺ co-doped tellurite glasses possessing excellent spectroscopic properties is a potential medium for mid-infrared laser.     

X-ray excited luminescence of Ce:Li2CaSiO4, Ce:CaBPO5 and Ce:LiCaPO4

Three materials Ce:Li₂CaSiO₄, Ce:CaBPO₅ and Ce:LiCaPO₄ were synthesized as polycrystalline samples for scintillation application in neutron detection. Ce³⁺ optical spectroscopy was investigated. Then, under X-rays excitation, Ce:Li₂CaSiO₄ and Ce:LiCaPO₄ present light yields about 7800 ph/MeV and 5900 ph/MeV, respectively. A self trapped exciton loss mechanism has been evidenced and competes with the cerium emission.     

Fluorescent properties of a blue-to green-emitting Ce3+, Tb3+ codoped amorphous calcium silicate phosphors

Ce³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor was prepared by heating (830 °C for 30 min) Ce³⁺, Tb³⁺ codoped calcium silicate hydrate phosphor formed by liquid-phase reaction. The excitation peak wavelength of the resulting phosphor was 330 nm and the emission peak wavelengths were at 544 nm, attributed to the ⁵D₄→⁷F₅ transition of Tb³⁺, and at 430–470 mm, attributed to Ce³⁺. The intensity ratio of the two peaks could be freely controlled by varying the Tb/Ca atomic ratio of the Ce³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor, allowing light to be emitted over a wide range from blue to green. It was clarified that energy transfer exists from Ce³⁺ to Tb³⁺.     

Thermo,Iono and photoluminescence properties of 100 MeV Si7+ ions bombarded CaSiO3:Eu3+ nanophosphor

This paper reports on the thermo (TL), iono (IL) and photoluminescence (PL) properties of nanocrystalline CaSiO₃:Eu³⁺ (1–5 mol %) bombarded with 100 MeV Si⁷⁺ ions for the first time. The effect of different dopant concentrations and influence of ion fluence has been discussed. The characteristic emission peaks ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) of Eu³⁺ ions was recorded in both PL (1×10¹¹–1×10¹³ ions cm^?2) and IL (4.16×10¹²–6.77×10¹² ions cm^?2) spectra. It is observed that PL intensity increases with ion fluence, whereas in IL the peaks intensity increases up to fluence 5.20×10¹² ions cm^?2, then it decreases. A well resolved TL glow peak at ～304 °C was recorded in all the ion bombarded samples at a warming rate of 5 °C s^?1. The TL intensity is found to be maximum at 5 mol% Eu³⁺ concentration. Further, TL intensity increases sub linearly with shifting of glow peak towards lower temperature with ion fluence.     

The VUV–vis luminescent properties of NaYFPO4: Dy3+ phosphor

Dy³⁺-doped monoclinic NaYFPO₄ phosphor has been synthesized by solid-state reaction technique. Its photoluminescence in the vacuum ultraviolet (VUV)-visible region was investigated. The most intensity broadband emission centered at about 171 nm was the host-related absorption. Another broadband at 153 nm could be related to the O₂→Dy³⁺ charge transfer band (CTB) absorption. The excitation peaks located at 178 nm and 256 nm were the spin-allowed (SA) and spin-forbidden (SF) f–d transitions of Dy³⁺, respectively. Some sharp lines in the range of 280–500 nm were due to the f–f transitions of Dy³⁺ within its 4f⁹ configuration. Under the VUV–vis excitation, the Dy³⁺-doped NaYFPO₄ phosphor showed the characteristic emissions of Dy³⁺ (⁴F_9/2→⁶H_15/2 transitions and ⁴F_9/2→⁶H_13/2 transitions) with a stronger blue emission peaking at about 485 nm. All the chromaticity coordinates of the sample were in the near cold-white region. It can be predicted that this phosphor can be applied in both mercury-free luminescence lamps and white LED.