Synthesis,characterization, luminescence properties and antioxidant activity of Ln(III) complexes with a new aryl amide bridging ligand

A novel Aryl amide ligand H₂L and its eight complexes, [LnH₂L(NO₃)₂·H₂O]NO₃ [Ln=Sm(III), Er(III), Tb(III), Dy(III), La(III), Gd(III), Nd(III), and Pr(III)], are presented. The ligand and complexes were synthesized and characterized based on elemental analyses, molar conductance, IR, ¹H and ¹³C-NMR, UV–VIS., and TGA studies. The conductivity data show a 1:1 electrolytic nature with a general formula [LnH₂L(NO₃)₂·2H₂O]NO₃ The IR spectra reveal coordination of the ligand through the azomethine nitrogen and the phenolic hydroxyl of the ligand to the lanthanide ion. The coordinated nitrate ions behave in a bidentate fashion. The thermal decomposition studies indicate the presence of two water molecules in the inner coordination sphere. Under the excitation at 319 nm, the luminescence emission properties for Sm, Tb, and Dy complexes are observed. These observations show that the ligand favors energy transfers to the emitting energy level of these lanthanide ions. Furthermore, the antioxidant activity of the ligand and its Ln(III) complexes was determined by DPPH radical scavenging method, which indicates that the Ln(III) complexes exhibit more effective antioxidant activity than the ligand alone.     

A highly luminescent complexes of Eu(III) and Tb(III) with norfloxacin and gatifloxacin doped in sol–gel matrix: A comparable approach of using silica doped Tb(III) and Eu(III) as optical sensor

Highly luminescent complexes of Eu and Tb ions with norfloxacin (NFLX) and gatifloxacin (GFLX) were prepared in sol–gel matrix. The red and green emissions of Eu and Tb ions were obtained by the energy transfer from the triplet state of (NFLX) and (GFLX) to the excited emitting states (⁵D₀ and ⁵D₄) of Eu and Tb, respectively. The intensity of the electric field emission bands (⁵D₀→⁷F₂, 617 nm and ⁵D₄→⁷F₅, 545 nm) of Eu and Tb ions were proportional to the concentration of (NFLX at pH 6.0) and (GFLX at pH 3.5) in acetonitrile with excitation wavelengths (λ_ex) (340 and 395) and (370 and 350 nm) for Eu and Tb ions, respectively. The monitored luminescence intensity of the system showed a good linear relationship with the concentration of NFLX within a range of 5×10^?9–5.8×10^?6 and 5×10^?8–1.0×10^?6 mol L^?1 with a correlation coefficient of 0.990, and for GFLX within a range of 2.4×10^?9–3.2×10^?5 and 5×10^?8–8.0×10^?6 mol L^?1 with a correlation coefficient of 0.995. The detection limit (LOD) was determined as 3.0×10^?9 and 1.0×10^?8 mol L^?1 for NFLX and 1.6×10^?10 and 2.0×10^?8mol L^?1 for GFLX. The limit of quantification (LOQ) is 9×10^?9 and 3.0×10^?8 and 4.8×10^?10 and 6.0×10^?8 in case of Eu and Tb, respectively.     

A general method for preparing lanthanide oxide nanoparticles via thermal decomposition of lanthanide(III) complexes with 1-hydroxy-2-naphthoic acid and hydrazine ligands

Six new lanthanide(III) complexes (i.e., [Ln(L)₂(NA)_1.5]·3H₂O, where Ln=La(III), Pr(III), Nd(III), Sm(III), Gd(III), and Ce(III) and L and NA indicate N₂H₄ and C₁₀H₆(1-O)(2-COO), respectively) with 1-hydroxy-2-naphthoic acid [C₁₀H₆(1-O)(2-COOH)] and hydrazine (N₂H₄) as co-ligands were characterized by elemental, FTIR, UV-visible, and XRD techniques. In the FT-IR spectra, the N-N stretching frequency in the range of 981–949 cm⁻¹ demonstrates evidence of the presence of coordinated N₂H₄, indicating the bidentate bridging nature of hydrazine in the complexes. These complexes show symmetric and asymmetric COO⁻ stretching from 1444 to 1441 cm⁻¹ and 1582 to 1557 cm⁻¹, respectively, indicating bidentate coordination. TG-DTA studies revealed that the compounds underwent endothermic dehydration from 98 to 110 °C. This was followed by the exothermic decomposition of oxalate intermediates to yield the respective metal oxides as the end products. From SEM images, the average size of the metal oxide particles prepared by thermal decomposition of the complexes was determined to be 39–42 nm. The powder X-ray and SEM coupled with energy dispersive X-ray (EDX) studies revealed the presence of the respective nano-sized metal oxides. The kinetic parameters of the decomposition of the complexes were calculated using the Coats-Redfern equation.     

Spectroscopic studies of lanthanide(III) ion complexes with diethyl(phthalimidomethyl) phosphonate

Complexation and photophysical properties of complexes of lanthanide ions, Ln(III), with diethyl(phthalimidomethyl)phosphonate ligand, DPIP, were studied. Interactions between Ln(III) and DPIP were investigated using Nd(III) absorption and Eu(III) and Tb(III) luminescence (emission and excitation) spectra, recorded in acetonitrile solution containing different counter ions (NO₃^-, Cl^- and ClO₄^-). Results of the absorption spectroscopy have shown that counter ions play a significant role in the complexation of Ln(III)/DPIP complexes. Studies of luminescence spectra of Eu(III) and Tb(III) ions proved that the formation of Ln(III)/DPIP complexes of stoichiometry Ln:L=1:3 is preferred in solution. Based on the results of elemental analysis, Nd(III) absorption spectra and IR and NMR data, it was shown that the DPIP ligand binds Ln(III) ions via oxygen from phosphoryl group, forming complexes of a general formula Ln(DPIP)₃(NO₃)₃·H₂O, in which the NO₃^- ions are coordinated with the metal ion as bidentate ligands. Luminescent properties and energy transfer, from the ligand to Ln(III) ions in the complexes formed, were studied based on the emission and excitation spectra of Eu(III) and Tb(III). Their luminescent lifetimes and emission quantum yields were also measured.     

Luminescence properties of Eu3+ and Sm3+ coactivated Gd(III) tungstate phosphor for light-emitting diodes

Rare-earth ions coactivated red phosphors Gd_0.2RE_1.8(WO₄)₃ (RE=Eu³⁺ and Sm³⁺) were synthesized by conventional solid-state reaction using boric acid as a flux agent. The samples were characterized by X-ray diffractometer (XRD), energy-dispersive X-ray spectrometer (EDS) and luminescence spectrometer (LS). The results showed that the Eu–Sm system exhibits higher emission intensity than those of the Eu single-doped system and Sm separate-doped system under ultraviolet (UV) radiation. Samarium(III) ions are effective in broadening and strengthened absorptions around 400 nm. Furthermore, it exhibits enhanced luminescence emission. when the mole ratio of boric acid is about 0.16, the luminescence capability is optimum. Two strongest lines at ultraviolet (394 nm) and blue (465 nm) in excitation spectra of these phosphors match well with the output wavelengths of UV and blue GaN-based light-emitting diodes (LEDs) chips.     

Self-assembled 3D sphere-like SrMoO4 and SrMoO4:Ln3+ (Ln = Eu,Sm, Tb,Dy) microarchitectures: Facile sonochemical synthesis and optical properties

Three-dimensional (3D) well-defined SrMoO₄ and SrMoO₄:Ln³⁺ (Ln = Eu, Sm, Tb, Dy) hierarchical structures of obvious sphere-like shape have been successfully synthesized using a large-scale and facile sonochemical route without using any catalysts or templates. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), and photoluminescence (PL) spectra were used to characterize the samples. The intrinsic structural feature of SrMoO₄ and external factor, namely the ultrasonic time and the pH value, are responsible for the ultimate shape evolutions of the product. The possible formation mechanism for the product is presented. Additionally, the PL properties of SrMoO₄ and SrMoO₄:Ln³⁺ (Ln = Eu, Sm, Tb, Dy) hierarchical structures were investigated in detail. The Ln³⁺ ions doped SrMoO₄ samples exhibit respective bright red–orange, yellow, green and white light of Eu³⁺, Sm³⁺, Tb³⁺ and Dy³⁺ under ultraviolet excitation, and have potential application in the field of color display. Simultaneously, this novel and efficient pathway could open new opportunities for further investigating about the properties of molybdate materials.     

Luminescent features of sol–gel derived rare-earth multi-doped oxyfluoride nano-structured phosphors for white LED application

Rare-earth doped oxyfluoride 75SiO₂:25PbF₂ nano-structured phosphors for white-light-emitting diodes were synthesized by thermal treatment of precursor sol–gel derived glasses. Room temperature luminescence features of Eu³⁺, Sm³⁺, Tb³⁺, Eu³⁺/Tb³⁺, and Sm³⁺/Tb³⁺ ions incorporated into low-phonon-energy PbF₂ nanocrystals dispersed in the aluminosilicate glass matrix and excited with UV light emitting diode were investigated. The luminescence spectra exhibited strong emission signals in the red (600, 610, 625, and 646 nm), green (548 and 560 nm), and blue (485 nm) wavelength regions. White-light emission was observed in Sm/Tb and Eu/Tb double-doped activated phosphors employing UV-LED excitation at 395 nm. The dependence of the luminescence emission intensities upon annealing temperature and rare-earth concentration was also examined. The results indicated that there exist optimum annealing temperature and activator ion concentration in order to obtain intense visible emission light with high color rendering index. The study suggests that the nanocomposite phosphor based upon 75SiO₂:25PbF₂ host herein reported is a promising contender for white-light LED applications.     

Fluorescent properties of a green- to red-emitting Eu3+, Tb3+ codoped amorphous calcium silicate phosphor

A Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor was prepared by heating a Eu³⁺, Tb³⁺ codoped calcium silicate hydrate phosphor formed by liquid-phase reaction for 30 min at 900 °C. The excitation peak wavelength of the resulting phosphor was 379 nm and the emission peak wavelengths were at 542 nm, attributed to the ⁵D₄→⁷F₅ transition of Tb³⁺, and at 613 mm, attributed to the ⁵D₀→⁷F₁ transition of Eu³⁺. The intensity ratio of the two peaks could be freely controlled by varying the Eu/Tb atomic ratio of the Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor, allowing light to be emitted over a wide range from green to red. It was clarified that electron transfer from Tb³⁺ to Eu³⁺ is occurring.     

Hydrothermal growth and characterization of La(OH)3 nanorods and nanocables with Ni(OH)2 coating

La(OH)₃/Ni(OH)₂ nanocables and La(OH)₃ nanorods were synthesized by the reaction of KOH with La(NO₃)₃ and Ni(NO₃)₂ at 180 °C under a hydrothermal conditions. X-ray diffraction, transmission electron microscopy and thermal analyses indicated that the nanocable consists of La(OH)₃ core and Ni(OH)₂ outer shell. The diameters of the La(OH)₃ nanorods range from 20 to 30 nm and the lengths range from 150 to 1000 nm. The thickness of the Ni(OH)₂ coating ranges from 10 to 20 nm. The formation mechanism of the nanocables is discussed.     

Energy transfer induced Eu3+ photoluminescence enhancement in tellurite glass

In this work, structural, thermal and optical properties of Eu³⁺ doped TeO₂–La₂O₃–TiO₂ glass were investigated. The differential scanning calorimetry (DSC) measurements reveal an important stability factor ΔT=143.52 K, which indicates the good thermal and mechanical stabilities of tellurite glass. From the absorption spectrum, the optical band gap was found to be direct with E_g=3.23 eV. The temperature dependences of photoluminescence (PL) properties of Eu-doped and Eu–Tb codoped tellurite glass are investigated. As the temperature increases from 7 to 300 K, both the PL intensity and the PL lifetime relative to the ⁵D₂→⁷F₀ are nearly constant below 230 K and then an enhancement takes place. This anomalous feature is attributed to the thermally activated carrier transfer process from charged intrinsic defects states to Eu³⁺ energy levels.By co-doping tellurite glasses with Eu and Tb, a strong Eu³⁺ PL enhancement is shown due to excitation transfer from Tb³⁺ and intrinsic defects to Eu ions.     

A new story in the structural chemistry of cerium(IV) phosphate

Two different cerium(IV) phosphates have been prepared by ageing at 95 °C an aqueous solution made from Ce(NO₃)₆(NH₄)₂, nitric acid, and phosphoric acid with the following conditions: P/Ce=2, [HNO₃]=5.8 M and [Ce⁴⁺]=0.1 M. The control over the formed solid was achieved through the ageing time. After 18 h, a metastable compound (A), corresponding to Ce(PO₄)_1.5(H₂O)(H₃O)_0.5(H₂O)_0.5, is obtained, while after 5 days a stable one (B), corresponding to Ce(PO₄)(HPO₄)_0.5(H₂O)_0.5, is recovered. Both solids exhibit a P/Ce ratio of 1.5. Their structures, ³¹P solid state NMR, and thermal behaviors are compared.     

Synthesis,characterization and luminescent property of metal-ion-doped terbium complexes of 2,3-Pyrazinedicarboxylate

Using 2,3-pyrazine dicarboxylate (pzdc^2?) as ligand, a series of new terbium complexes Tb₂L₂(HL)(NO₃)10 H₂O, Tb₂Mg₂L₄(HL)(NO₃)14 H₂O, Tb₂Ca₂L₄(HL)(NO₃)14 H₂O, Tb₂Sr₂L₄(HL)(NO₃)14 H₂O, Tb₂Ba₂L₄(HL)(NO₃)14 H₂O, Tb₂Cd₂L₄(HL)(NO₃)14 H₂O, Tb₂Co₂L₄(HL)(NO₃)14 H₂O, Tb₂Ni₂L₄(HL)(NO₃)14 H₂O and Tb₂Zn₂L₄(HL)(NO₃)14 H₂O (L=pzdc^2-) have been synthesized. The complexes were characterized by elemental analysis, ICP-AES, molar conductivity measurement, TG-DSC analysis, IR spectroscopy and UV absorption spectroscopy. The luminescence spectra, luminescence lifetimes and emission quantum efficiencies of the complexes were measured. The results show that doping alkaline earth metal ions have significantly increased the luminescence intensities and quantum efficiencies of the complexes, and the sequence of the quantum efficiencies of the doped complexes is Ba²⁺>Ca²⁺>Mg²⁺>Sr²⁺. The enhancement of luminescence efficiencies may result from the decrease of the concentration quenching effect of Tb³⁺ ions, intramolecular energy transfer from the ligands coordinated with doped ions to Tb³⁺ ions and the lattice distortion of the complexes. The luminescence efficiencies of the Tb³⁺ ions are also enhanced by doping Cd²⁺ and Zn²⁺ ions. However, the complexes doped with Co²⁺ or Ni²⁺ ions exhibit luminescence quenching, which is caused by the energy consumed by these two ions in the form of d-d electron transitions.     

Ultrasound-assisted mineralization of organic contaminants using a recyclable LaFeO3 and Fe3+/persulfate Fenton-like system

A recyclable heterogeneous catalyst has been successfully developed for application in a Fenton-type advanced oxidation process without adding external H₂O₂. LaFeO₃ was prepared from Fe(NO₃)₃·9H₂O and La(NO₃)·6H₂O by a simple sol-gel method and its catalytic efficiency was evaluated for mineralization of 4-chlorophenol using a Fenton-like process. The mineralization process was carried out under ultrasonication in presence of heterogeneous LaFeO₃ catalyst with H₂O₂ that was produced during ultrasonication. The mineralization process was monitored through total organic carbon (TOC) analysis. Very importantly, utmost 5-fold synergism was evidenced by the ultrasound mediated LaFeO₃-catalyzed system. Besides, more than twofold synergism was observed by combining the ultrasound assisted LaFeO₃ catalytic process and potassium persulfate (KPS) assisted advanced oxidation process. It is worth to mention that complete mineralization (∼96%) of 4-chlorophenol (initial concentration of 1.25 × 10⁻⁴ M) was observed within 1 h in the presence of LaFeO₃ (0.5 g L⁻¹) and KPS (1.0 mmol) under ultrasonication (40 kHz). Even after four cycles, the activity of LaFeO₃ remained intact which proved its recyclability. Extremely reusable heterogeneous LaFeO₃ catalyst makes the system more interesting from both economic and environmental points of view.     

Investigation of the photoluminescence properties of composite optical resins containing high lanthanide content

Novel composite optical resins with high lanthanide content have been synthesized through a free radical copolymerization of methacrylic acid (MA), styrene (St) and Eu(DBM)₃·H₂O nanocrystals. We characterized the structure, the thermal properties, dimensions and photoluminescence properties of Eu(DBM)₃·H₂O nanocrystals. Our results indicated that the diameters of the Eu(DBM)₃·H₂O nanocrystals were within the range of 30 to 300 nm. These materials exhibited characteristic europium ion luminescence. The europium-bearing nanocrystals and were then incorporated into the copolymer systems of MA/St and luminescence functional optical resins with high lanthanide content (50 wt%) were obtained. The combination of these particles and optical resins is facile because the diameter of Eu(DBM)₃·H₂O is decreased. These copolymer-based optical resins not only possess good transparency and mechanical performance, but also exhibit an intense narrow band emission of lanthanide complexes and longer fluorescence lifetimes under UV excitation at room temperature.     

Bi-assisted chemical etching of silicon in HF/Co(NO3)2 solution

The morphology and the photoluminescence (PL) of Bi-assisted electroless etched p-type silicon in HF–Co(NO₃)₂–H₂O solution as a function of etching time were studied. The scanning electron microscopy (SEM) observations have shown that the morphology of etched layers strongly depends on the etching time and it was observed that macropores filled with silicon crystallites are formed for etching time higher than 50 min. Moreover, it was found that the PL spectra show a red emission with a peak centred at 640 nm. The PL peak intensity reaches a maximum for etching time of 50 min, and then it decreases with increasing etching time. The Fourier transform infrared (FTIR) measurements have shown a strong increase in intensities of the relevant Si–H and in the amount of oxide (absorption band at 1070 cm^?1) for long etching time which was ascribed to an increase in the number of Si crystallites formed in the macropores.     

Syntheses and Fluorescence Properties of Two Novel Lanthanide (III) Perchlorate Complexes with Bis(benzylsulfinyl)methane

A novel ligand with double sulfinyl groups, bis(benzylsulfinyl)methane, was synthesized by a new method and its two lanthanide (III) complexes were synthesized and characterized by element analysis, molar conductivity, coordination titration analysis, IR, TG-DSC, ¹HNMR and UV spectra. The results indicated that the composition of these complexes was REL_2.5(ClO₄)₃·3H₂O (RE = Tb (III), Dy (III), L = C₆H₅CH₂SOCH₂SOCH₂C₆H₅). The FT-IR results revealed that the perchlorate group was bonded with the lanthanide ion by the oxygen atoms, and the coordination was bidentate. The fluorescent spectra illustrated that both the Tb (III) and Dy (III) complexes displayed characteristic fluorescence in solid state, especially for the Tb (III) complex, the peak of ⁵D₄ → ⁷ F₅ of the Tb (III) ion in 544 nm was stronger than that of others. It indicated that the Tb (III) complex could emit purer green fluorescence. By analysis fluorescence and phosphorescence spectra, it was found that the ligand had the advantage to absorb energy and transfer it to the Tb (III) and Dy (III) ions. The phosphorescence spectra and fluorescence lifetimes of the complexes were also measured.     

Development of zeolite-derived novel aluminosilicate phosphors

In this research, zeolite-derived aluminosilicate phosphors were synthesized through the ion exchange route. Red light-emitting property of Eu³⁺-doped aluminosilicate phosphors were discussed from a view point of the Eu content, heat-treatment condition and the oxidation state of Eu ions. The crystalline phase of the host aluminosilicates could be successfully controlled as designed based on the published NaAlO₂–SiO₂ binary phase diagram. Orange-red emission peaks derived from the ⁵D₀→⁷F_j (j=0, 1, 2, 3, 4) transition of Eu³⁺ were observed around 590–700 nm, and 4f⁶5d→4f⁷ transition of Eu²⁺ was observed at around 400–500 nm. The relative intensity I(⁵D₀→⁷F₂) of the dominant emission peak at 612 nm increased consistently with the Eu content. The results of the XANES spectroscopy analysis revealed that Eu²⁺ ion in the 1400 °C as heat-treated host aluminosilicate were successfully converted to Eu³⁺ by the additional annealing at 1100 °C. The Eu contents and heat-treatment conditions were determined to exhibit the best performance as a red phosphor, which were 10 wt% and 1500 °C, respectively     

Synthesis and photoluminescence study of rare earth activated phosphor Na2La2B2O7

The photoluminescence properties in UV and N-UV excitable range for the phosphors of Na₂La₂B₂O₇: RE (RE=Eu, Tb, Ce, Sm, Gd) are investigated. The solution combustion synthesis technique was employed for the synthesis of the phosphors Na₂La₂B₂O₇: RE. The photoluminescence measurements of the phosphors were carried out on a HITACHI F7000 Fluorescence Spectrophotometer. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Na₂La₂B₂O₇: Eu are 591 and 615 nm, Na₂La₂B₂O₇: Ce shows dominating emission peak at 387 nm and Na₂La₂B₂O₇: Tb displays green emission at 493, 544, 593 and 620 nm at 254 nm excitation, while Na₂La₂B₂O₇: Sm shows the main emission peak wavelengths 566 and 604 nm at 405 nm excitation and Na₂La₂B₂O₇: Gd shows dominating emission peak at 312 nm at 274 nm excitation. These phosphors may provide a new kind of luminescent materials under ultraviolet and near ultraviolet excitation for various applications.     

Structural,vibrational study and superprotonic behavior of a new mixed dipotassium hydrogenselenate dihydrogenphosphate K2(HSeO4)1.5(H2PO4)0.5

Ongoing studies of the KHSeO₄–KH₂PO₄ system aiming at developing novel proton conducting solids resulted in the new compound K₂(HSeO₄)_1.5(H₂PO₄)_0.5 (dipotassium hydrogenselenate dihydrogenphosphate). The crystals were prepared by a slow evaporation of an aqueous solution at room temperature. The structural properties of the crystals were characterized by single-crystal X-ray analysis: K₂(HSeO₄)_1.5(H₂PO₄)_0.5 (denoted KHSeP) crystallizes in the space group P 1¯ with the lattice parameters: a = 7.417(3) Å, b = 7.668(2) Å, c = 7.744(5) Å, α = 71.59(3)°, β = 87.71(4)° and γ = 86.04(6)°. This structure is characterized by HSeO₄⁻ and disordered (H_xSe/P)O₄⁻ tetrahedra connected to dimers via hydrogen bridges. These dimers are linked and stabilized by additional hydrogen bonds (O–H–O) and hydrogen bridges (O–H…O) to build chains of dimers which are parallel to the [0, 1, 0] direction at the position x = 0.5.The differential scanning calorimetry diagram showed two anomalies at 493 and 563 K. These transitions were also characterized by optical birefringence, impedance and modulus spectroscopy techniques. The conductivity relaxation parameters of the proton conductors in this compound were determined in a wide temperature range. The transport properties in this material are assumed to be due to H⁺ protons hopping mechanism.     

Sonochemical synthesis of Dy2(CO3)3 nanoparticles,Dy(OH)3 nanotubes and their conversion to Dy2O3 nanoparticles

Dysprosium carbonates nanoparticles were synthesized by the reaction of dysprosium acetate and NaHCO₃ by a sonochemical method. Dysprosium oxide nanoparticles with average size about 17 nm were prepared from calcination of Dy₂(CO₃)₃·1.7H₂O nanoparticles. Dy(OH)₃ nanotubes were synthesized by sonication of Dy(OAC)₃·6H₂O and N₂H₄. The as-synthesized nanostructures were characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR). Photoluminescence measurement shows that the nanoparticles have two emission peaks around 17,540 cm^?1 and 20,700 cm^?1, which should come from the electron transition from ⁴F_9/2 → ⁶H_15/2 levels and ⁴F_9/2 → ⁶H_13/2 levels, respectively. The effect of calcination temperature and sonication time was investigated on the morphology and particle size of the products. The sizes could be controlled by the feeding rate of the precipitating agent (NaHCO₃ and N₂H₄) and slower feeding rate lead to smaller nanoparticles.