Effect of Yb3+ concentration on photoluminescence properties of cubic Gd2O3 phosphor

Yb³⁺ doped phosphor of Gd₂O₃ (Gd₂O₃:Yb³⁺) have been prepared by solid state reaction method. The structure and the particle size have been determined by X-ray powder diffraction measurements. The average particle size of the phosphor is in between 35 and 50 nm. The particle size and structure of the phosphor was further confirmed by TEM analysis. The visible and NIR luminescence spectra were recorded under the 980 nm laser excitation. The visible upconversion luminescence of Yb³⁺ ion was due to cooperative luminescence and the presence of rare earth impurity ions. The cooperative upconversion and NIR luminescence spectra as a function of Yb³⁺ ion concentration were measured and the emission intensity variation with Yb³⁺ ion concentration was discussed. Yb³⁺ energy migration quenched the cooperative luminescence of Gd₂O₃:Yb³⁺ phosphor with doping level over 5%, while the NIR emission luminescence continuously increases with increasing Yb³⁺ ion concentration.     

Synthesis and luminescence properties of Gd6MoO12:Yb3+, Er3+ phosphor with enhanced photoluminescence by Li+ doping

Yb³⁺/Er³⁺ co-doped Gd₆MoO₁₂ and Yb³⁺/Er³⁺/Li⁺ tri-doped Gd₆MoO₁₂ phosphors were prepared by adjusting the annealing temperature via the high temperature solid-state method. Under the excitation of 980 nm semiconductor, the upconversion luminescence properties were investigated and discussed. In the experimental process, we get the optimum Yb³⁺ concentration and the concentration quench effect will happen while the concentration extends the given region. According to the Yb³⁺ concentration quenching effects, the critical distance between Yb³⁺ ions had been calculated. The measured UC luminescence exhibited a strong red emission near 660 nm and green emission at 530 nm and 550 nm, which are due to the transitions of Er³⁺(⁴F_9/2, ²H_11/2, ⁴S_3/2) → Er³⁺(⁴I_15/2). Then the effect of excitation power density in different regions on the upconversion mechanisms was investigated and the calculated results demonstrate that the green and red upconversion is a two-photon process. A possible mechanism was discussed. After Li⁺ ions mixing, the upconversion emission enhanced largely, and the optimum Li⁺ concentration was obtained while fixed the Yb³⁺ and Er³⁺ on the above optimum concentration. This enhancement owns to the decrease of the local symmetry around Er³⁺ after Li⁺ ions doping into the system. This result indicates that Li⁺ is a promising candidate for improving luminescence in some case.     

Temporal dynamics of upconversion luminescence in Er3+, Yb3+ co-doped crystalline KY(WO4)2 thin films

Crystalline Er³⁺ and Yb³⁺ singly and doubly doped KY(WO₄)₂ thin films were grown by low-temperature liquid-phase epitaxy. Absorption, luminescence, excitation and temporal evolution measurements were carried out for both Er³⁺ and Yb³⁺ transitions from 10 K to room temperature. Green Er³⁺ upconversion luminescence was observed after Yb³⁺ and Er³⁺ excitation. The mechanisms responsible for the upconversion phenomena detected in each case were identified.     

Infrared to visible upconversion luminescence in Er3+/Yb3+ doped titanate glass prepared by containerless processing

Er³⁺ doped TiO₂–La₂O₃ glasses modified by ZrO₂ have been successfully fabricated by the containerless method with incorporated Yb³⁺ ions as sensitizers. Under the excitation of 980 and 808 nm diode lasers, visible emissions centered at 534, 554 and 674 nm are observed, which are assigned to the Er³⁺ transitions of ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2, respectively. The emission signals are so strong that they can be observed by naked eyes even at pumping power as low as 20 mW. Measurements of pump-power dependent intensity and time-resolved decay behavior of upconversion luminescence show that two-photon excited state absorption (ESA) and energy transfer (ET) between rare earth ions are the predominant mechanisms for upconversion emissions. Besides, the intensity of upconversion luminescence has been enhanced by increasing the concentration of ZrO₂ in these rare earth doped bulk titanate glasses.     

Upconversion mechanisms and thermal effects of Er3+ in Er3+ doped yttria nanocrystals

Efficient Er³⁺:Y₂O₃ phosphor is synthesized by the sol–gel method. Rate equations for Er³⁺ energy level populations are used to investigate pump power and temperature dependences of upconversion intensity as well as the fluorescence decay profiles. Excited state absorption cross section of Er^{3+ 4}I_13/2 of 6.8×10^?27 m² and cross relaxation rate of 6200 s^?1 are determined from comparison between theoretical predictions and experimental data. In addition, it is found that effect of temperature on the phonon-assistant absorption cannot be neglected. This work provides references for the prediction of the upconversion behavior in Er³⁺ singly doped matrix.     

Fabrication and luminescence behavior of phosphate glass ceramics co-doped with Er3+ and Yb3+

Transparent phosphate glass ceramics co-doped with Er³⁺ and Yb³⁺ in the system P₂O₅Li₂OCaF₂TiO₂ were successfully synthesized by melt-quenching and subsequent heating. Formation of the nanocrystals was confirmed by X-ray powder diffraction. Judd–Ofelt analyses of Er³⁺ ions in the precursor glasses and glass ceramics were performed to evaluate the intensity parameters Ω_2,4,6. Under 975 nm excitation, intense upconversion (UC) and infrared emission (1545 nm) were observed in the glass ceramics by efficient energy transfer from Yb³⁺ to Er³⁺. The luminescence processes were explained and the emission cross section was calculated by Fuchtbauer–Ladenburg (F–L) formula. The results confirm the potential applications of Er³⁺/Yb³⁺ co-doped glass ceramics as laser and fiber amplifier media.     

Color tunable emission from (GdxY1−x)2O3: Er3+, Yb3+ phosphor prepared by combustion method

The (Gd_xY_1?x)₂O₃: Er³⁺, Yb³⁺ [x=0.0, 0.1, 0.5, 0.9, 1.0] phosphor samples with 0.5 mol% concentration of Er³⁺ and 3.0 mol% of Yb³⁺, have been prepared using combustion route. The effect of variation of composition on the morphology, crystallinity and photoluminescence characteristics of the material has been investigated. The samples were post-heated at a temperature 1200 °C, for 5 h. We find systematic color tunability from red to green with an increase of Gd₂O₃ content in Y₂O₃ lattice. Further, the post-heated samples show an enhancement of fluorescence intensity for more than fifteen times. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence measurement and Fourier transform infrared (FTIR) techniques in order to find out the structural changes in host lattice. An increase in crystallite size has been marked with increasing Gd content while FTIR analysis explains the reason of variation in the fluorescence of rare earth ions in different host matrices.     

Synthesis and luminescence properties of Er3+-doped Lu3Ga5O12 nanocrystals

The concentration-dependent luminescence properties of sol–gel-derived nanocrystalline Lu_3(1?x)Er_3xGa₅O₁₂ powders (where x=0.01, 0.05 and 0.1) have been studied. Laser-excited luminescence spectra, emission decays and upconversion luminescence of Er³⁺-doped Lu₃Ga₅O₁₂ nanocrystalline samples have been measured. The decay curve of the (²H_11/2,⁴S_3/2) emission exhibits a non-exponential behavior presumably due to cross-relaxation process. Moreover, near-infrared to visible upconversion luminescence has been observed in the green region for 1.0 mol% Er³⁺ ions in Lu₃Ga₅O₁₂ nanocrystals upon 815 nm excitation. The power dependence of the anti-Stokes luminescence suggests that upconversion is probably achieved through the sequential absorption of two photons. To the best of our knowledge, this is the first report on the preparation and optical properties of Er³⁺-doped Lu₃Ga₅O₁₂ in the form of nanocrystalline powders.     

Intense 974 nm emission from ErxYb2−xSi2O7 films through efficient energy transfer up-conversion from Er3+ to Yb3+ for Si solar cell

The optical properties of the Er_xYb_2?xSi₂O₇ thin films were investigated by photoluminescence measurements and the intense 974 nm light emission was observed. The 974 nm emission was mainly from the transition ²F_5/2 to ²F_7/2 level of Yb³⁺ upon exploring energy-transfer via up-conversion at Er^{3+ 4}I_13/2 level. Under 972 nm excitation, the lifetime at Er^{3+ 4}I_13/2 level reaches up to 4 ms for film containing 2 at% Er³⁺, while decreases to about 20 μs as the film is pumped by 488 nm. This confirmed that the energy transfer up-conversion process was the dominant transition at Er^{3+ 4}I_13/2 level. This may be of interest to improve the solar cells′ efficiency by placing this film at the rear of cell, converting the near-infrared photons between 1480 nm and 1580 nm to just above the Si bandgap.     

Improvement of sonocatalytic activity of TiO2 by using Yb,N and F-doped Er3+:Y3Al5O12 for degradation of organic dyes

In this study, several up-conversion luminescence agents (Er³⁺:Y₃Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99 and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98) were synthesized using sol–gel method. And then, the corresponding sonocatalyst (Er³⁺:Y₃Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99/TiO₂ and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites) were prepared by sol–gel coating process. The synthesized up-conversion luminescence agents and their coated composites were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). And that, the sonocatalytic activities were detected through the degradation of Azo Fuchsine (AF) dye in aqueous solution by UV–vis spectroscopy. Some key influences such as heat-treated temperature and heat-treated time on the sonocatalytic activity of Er³⁺:Yb_aY_2.99−aN_xF_yAl₅O_12−x−y/TiO₂ coated composite, as well as ultrasonic irradiation time and initial dye concentration on the sonocatalytic degradation were studied. The results showed that the doping of Yb, N and F into Er³⁺:Y₃Al₅O₁₂/TiO₂ significantly enhanced the sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂ coated composite in the degradation of organic dyes. Particularly, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites with 3:7 M ratio heat-treated at 550 °C for 60 min showed the highest sonocatalytic activity. At last, the experiments also indicated that the Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites has a good sonocatalytic activity to degrade other organic dyes under ultrasonic irradiation.     

Microwave sol–gel derived NaCaGd(MoO4)3:Er3+/Yb3+ phosphors and their upconversion photoluminescence properties

Ternary molybdate NaCaGd_1−x(MoO₄)₃:Er³⁺/Yb³⁺ phosphors with the proper doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0, 0.05, 0.1, 0.2 and Yb³⁺ = 0, 0.2, 0.45) were successfully synthesized by microwave sol–gel method for the first time. Well-crystallized particles formed after heat-treatment at 900 °C for 16 h showed a fine and homogeneous morphology with particle sizes of 3–5 μm. The optical properties were examined comparatively using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the doped particles exhibited a strong 525-nm emission band, a weak 550-nm emission band in the green region, which correspond to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions, and a very weak 655-nm emission band in the red region, which corresponds to the ⁴F_9/2 → ⁴I_15/2 transition. The optimal Yb³⁺:Er³⁺ ratio was obtained to be 9:1, as indicated by the composition-dependent quenching effect of Er³⁺ ions. The pump power dependence of upconversion emission intensity and Commission Internationale de L’Eclairage chromaticity coordinates of the phosphors were evaluated in detail.     

Optical temperature sensor through infrared excited blue upconversion emission in Tm3 +/Yb3 + codoped Y2O3

An analysis of the intense blue upconversion emission at 476 and 488 nm in Tm^3 +/Yb^3 + codoped Y₂O₃ under excitation power density of 86.7 W/cm² available from a diode laser emitting at 976 nm, has been undertaken. Fluorescence intensity ratio (FIR) variation of temperature-sensitive blue upconversion emission at 476 and 488 nm in this material was recorded in the temperature range from 303 to 753 K. The maximum sensitivity derived from the FIR technique of the blue upconversion emission is approximately 0.0035 K^? 1. The results imply that Tm^3 +/Yb^3 + codoped Y₂O₃ is a potential candidate for the optical temperature sensor.     

Comparative study of the spectroscopic properties of Yb3+/Er3+ codoped tellurite glasses modified with R2O (R=Li,Na and K)

Spectroscopic characterization of Yb³⁺/Er³⁺ codoped TeO₂–R₂O–ZnO–Ln₂O₃ glasses as a function of network modifiers (R=Li, Na and K) has been investigated. The Judd–Ofelt parameters (Ω_t), quantum efficiency in near infrared (1.55 μm) and visible up-conversion (546 and 660 nm) and quality factor spectroscopy (χ) were calculated. Three up-conversion emission bands centered at 525, 546 and 660 nm were observed as maxima for glasses containing potassium. The measured lifetime of ⁴I_13/2, ⁴F_9/2 and ⁴S_3/2 from Er³⁺ and ⁴F_5/2 from Yb³⁺ levels increased when potassium (K) replaced lithium (Li) and Na. The maximum emission cross-section (ECS) for ⁴I_13/2→⁴I_15/2 transition of Er³⁺ was calculated to be 1.02×10^?20 cm² for TeO₂–Li₂O–ZnO–Ln₂O₃ glasses. The energy transfer efficiency (ET) from Yb³⁺ to Er³⁺, (⁴F_5/2)+(⁴I_15/2)→(⁴F_7/2)+(⁴I_13/2), was calculated using the measured lifetimes of Yb³⁺ with and without the presence of acceptor (Er³⁺). The maximum calculated ET was 58% for 0.25 mol% of Er³⁺ and 3 mol% of Yb³⁺ for TeO₂–K₂O–ZnO–Ln₂O₃ glass composition.     

Upconversion photoluminescence properties of SrY2(MoO4)4:Er3+/Yb3+ phosphors synthesized by a cyclic microwave-modified sol–gel method

SrY_2−x(MoO₄)₄:Er³⁺/Yb³ phosphors with doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0.05, 0.1, 0.2 and Yb³⁺ = 0.2, 0.45) have been successfully synthesized by a cyclic microwave-modified sol–gel method, and the upconversion photoluminescence properties have been investigated. Well-crystallized particles showed a fine and homogeneous morphology with particle sizes of 1–3 μm. Under excitation at 980 nm, SrY₂(MoO₄)₄:Er³⁺/Yb³⁺ particles exhibited a strong 525-nm, weak 550-nm emission bands in the green region, and a very weak 655-nm emission band in the red region. The possible mechanism of the green and red emissions was discussed in detail under consideration of a two-photon process. The Raman spectra of the particles indicated the presence of strong peaks at both higher and lower frequencies.     

Tailoring red-green-blue emission from Er3+, Eu3+ and Tb3+ doped Y2O3 nanocrystals produced via PVA-assisted sol-gel route

Y₂O₃ luminescent nanoparticles were synthesized via PVA-assisted sol-gel method and their structural and optical properties were investigated. Effects of rare earth (Er³⁺, Eu³⁺ and Tb³⁺) doping on luminescence properties of the produced nanophosphors have been investigated under NIR (800 nm) and UV (240–300 nm) excitation. Intense infrared to red and green emissions were observed and a weak blue upconverted luminescence was also detected. Moreover, it was observed that changing the doping ions, the color emitted by the samples could be modified and different combinations of UV excitation and doping produced effective white light emissions. The obtained results demonstrate that PVA-assisted sol-gel is an effective methodology for the synthesis of rare-earth doped Y₂O₃ nanophosphors.     

Near-infrared broadband luminescence and energy transfer in Bi–Tm–Er co-doped lanthanum aluminosilicate glasses

The Bi–Tm–Er co-doped SiO₂–Al₂O₃–La₂O₃ (SAL) glasses, which exhibited a broadband near-infrared (NIR) emission, were investigated by the optical absorption and photoluminescence spectra. A super broadband NIR emission extending from 0.95 to 1.6 μm with a full-width at half-maximum (FWHM) of 430 nm which covered the whole O, E, S, C and L bands, was observed in Bi–Tm–Er co-doped samples under 808 nm excitation, as a result of the overlap of the Bi-related emission band (centered at 1270 nm) and the emission from Tm^{3+ 3}H₄→³F₄ transition (1450 nm) as well as Er^{3+ 4}I_13/2→⁴I_15/2 transition (1545 nm). In addition, a super broadband emission with amplitude relatively flat from 0.95 to 2.1 μm has been observed. The possible energy transfer between Bi-related centers, Tm³⁺ ions and Er³⁺ ions was proposed.     

Towards efficient upconversion and downconversion of NaYF4:Ho3+,Yb3+ phosphors

NaYF₄ microcrystals co-doped with Ho³⁺ and Yb³⁺ were prepared by a facile hydrothermal synthesis. The products were characterized by X-ray diffractometer, scanning electron microscopy, and photoluminescence spectroscopy. Upon excitation with a 980 nm laser diode, the sample shows an intense green upconversion emission centered at 540 nm corresponding to the ⁵S₂→⁵I₈ transition of Ho³⁺. The quadratic dependence of the green emission intensity on the excitation power reveals a two-phonon upconversion process. On the contrary, upon excitation with 448 nm, both visible and near-infrared emissions peaked at 483, 540, 644, 749, and 978 nm are simultaneously observed, which could be assigned to the electronic transitions of Ho³⁺: ⁵F₃→⁵I₈, ⁵S₂→⁵I₈, ⁵F₅→⁵I₈, ⁵S₂→⁵I₇, and Yb³⁺: ²F_5/2→²F_7/2, respectively. The energy transfer processes between Ho³⁺ and Yb³⁺ ions and the involved mechanisms have been investigated and discussed.     

Yb3+敏化的Er3+/Ho3+共掺碲酸盐玻璃的上转换发光研究

用高温熔融法制备了系列Er³⁺/Yb³⁺共掺，Ho³⁺/Yb³⁺共掺，和Er³⁺/Yb³⁺/Ho³⁺三掺碲酸盐玻璃，在975nm激光抽运下三种掺杂玻璃中都出现了较强的绿光和红光上转换.研究了Yb³⁺离子对Er³⁺和Ho³⁺离子上转换发光强度的影响以及Yb³⁺→Er关键词： 3+/Yb³⁺/Ho³⁺共掺')" href="#">Er³⁺/Yb³⁺/Ho³⁺共掺 碲酸盐玻璃 光谱性质 上转换     

Photoluminescence in Gd2O3: Er3+, Yb3+ upconversion inverse opal

Photoluminescence properties of Gd₂O₃: Er³⁺, Yb³⁺ upconversion inverse opal photonic crystals were investigated. The photoluminescence spectra of the inverse opal show strong dependence on upconversion emission intensity and the corresponding photonic band-gaps of the inverse opal. Significant suppression of the green or red upconversion emission was observed if the photonic band-gap overlaps with the Er³⁺ ions emission band. The color purity of the red or green emission was improved in the inverse opal by the suppression of green or red UC emission. We believe that the present work will be valuable for not only the foundational study of upconversion emission modification but also new optical devices in upconversion lighting and display.     

Broadband infrared luminescence in Yb-doped Bi2O3–GeO2 glasses

The Yb-doped Bi₂O₃–GeO₂ glasses were prepared by the conventional melt quenching technique. Near-infrared (NIR) broadband emission was found at about 1024 nm, and 1330 nm (under 785 nm excitation), and the measured fluorescent lifetime was about several hundred microseconds. The emission intensity of Yb-doped Bi₂O₃–GeO₂ glasses increased with increasing of Yb dopant in our experiments. The NIR emission should be related to Yb³⁺ and lower valence Bi ions.