(Vapour + liquid) equilibria (VLE) of CO2 in aqueous solutions of 2-amino-2-methyl-1-propanol: New data and modelling using eNRTL-equation

This work presents new experimental results for carbon dioxide (CO₂) solubility in aqueous 2-amino-2-methyl-1-propanol (AMP) over the temperature range of (298 to 328) K and CO₂ partial pressure of about (0.4 to 1500) kPa. The concentrations of the aqueous AMP lie within the range of (2.2 to 4.9) mol · dm^?3. A thermodynamic model based on electrolyte non-random two-liquid (eNRTL) theory has been developed to correlate and predict the (vapour + liquid) equilibrium (VLE) of CO₂ in aqueous AMP. The model predictions have been in good agreement with the experimental data of CO₂ solubility in aqueous blends of this work as well as those reported in the literature. The current model can also predict speciation, heat of absorption, enthalpy of CO₂ loaded aqueous AMP, pH of the loaded solution, and AMP volatility.     

Equilibrium solubility of carbon dioxide in the amine solvent system of (triethanolamine + piperazine + water)

In this study, a new set of data for the equilibrium solubility of carbon dioxide in the amine solvent system that consists of triethanolamine (TEA), piperazine (PZ), and water is presented. Equilibrium solubility values were obtained at T = (313.2, 333.2, and 353.2) K and pressures up to 153 kPa using the vapour-recirculation equilibrium cell. The TEA concentrations in the considered ternary (solvent) mixture were (2 and 3) kmol · m^?3 and those of PZ’s were (0.5, 1.0, and 1.5) kmol · m^?3. The solubility data (CO₂ loading in the amine solution) obtained were correlated as a function of CO₂ partial pressure, system temperature, and amine composition via the modified Kent–Eisenberg model. Results showed that the model applied is generally satisfactory in representing the CO₂ absorption into mixed aqueous solutions of TEA and PZ.     

Measuring solubility of carbon dioxide in aqueous blends of N-methyldiethanolamine and 2-((2-aminoethyl)amino)ethanol at low CO2 loadings and modelling by electrolyte SAFT-HR EoS

In this work, new solubility values for CO₂ absorption in aqueous solutions of N-methyldiethanolamine (MDEA) in the presence of different mole ratios of 2-((2-aminoethyl)amino)ethanol (AEEA) at low pressures are obtained. The total molar amine concentration of all the solutions has been fixed equal to 3.360 mol · L⁻¹ (5.370 mol amine · kg⁻¹ water). The mole ratio of AEEA/MDEA was set to 0.12500, 0.10000 and 0.05000. The experimental total pressure varied from (7.3 to 386.6) kPa and the experimental temperature was set to (313.15, 328.15, 343.15 and 358.15) K. The electrolyte SAFT-HR (eSAFT-HR) equation of state (EoS) (Najafloo et al., 2014) has been successfully applied to model the solubility of CO₂ in aqueous mixtures of AEEA and MDEA. The overall average absolute relative per cent deviation (AAD%) in calculating the total pressure as a function of CO₂ loading is 7.74 for (AEEA + MDEA + CO₂ + H₂O) quaternary system at the four values of temperature. To verify the predictive ability of the model, the eSAFT-HR EoS was extrapolated to the Zoghi and Feyzi (2013) solubility results of the same quaternary system that were obtained at higher pressures or higher CO₂ loadings at the same temperatures. The AAD of the present model is 11.39% lower.     

Gas solubility of CO2 in aqueous solutions of N-methyldiethanolamine and diethanolamine with 2-amino-2-methyl-1-propanol

Gas solubility of carbon dioxide in an aqueous solution of 32.5 wt.% N-methyldiethanolamine and 12.5 wt.% diethanolamine with 4, 6, and 10 wt.% 2-amino-2-methyl-1-propanol has been measured, at 313.15, 343.15, and 393.15 K, over a range of pressure from 3 to 2000 kPa, using a chromatographic method for analysis of the liquid phase. The results of the gas solubility are given as the partial pressure of CO₂ against its mole ratio α (mol CO₂/mol alkanolamine) and its mole fraction at each temperature studied. The solubility of CO₂ in all the systems studied decreases with an increase in temperature and increases with an increase in the partial pressure of CO₂ at a given temperature and it is a function of the concentration of the mixture of alkanolamines in solution. The enthalpy of solution of CO₂ has been calculated from the experimental solubility data.     

Solubility of hydrogen in toluene for the ternary system H2 + CO2 + toluene from 305 to 343 K and 1.2 to 10.5 MPa

The solubility of hydrogen in toluene in the presence of the compressed CO₂ at the temperatures from 305 to 343 K and the pressures from 1.2 to 10.5 MPa was measured by using a continuous flow technique. The obtained data indicate that more hydrogen could be dissolved in toluene at the pressures higher than a certain value depending on temperature and the molar ratio of H₂ to CO₂ in gas. The Peng–Robinson equation of state associated with the van der Waals mixing rule were found to correlate the VLE data of the ternary system H₂ + CO₂ + toluene satisfactorily. From the volume expansion resulted from the dissolution of CO₂ in toluene calculated by the proposed model, it was found that hydrogen solubility was generally increased with increasing volume expansion. A large volume expansion was required to enhance hydrogen solubility when the mole fraction of hydrogen in gas was low.     

Enthalpy of absorption and limit of solubility of CO2 in aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol, 2-[2-(dimethyl-amino)ethoxy] ethanol,and 3-dimethyl-amino-1-propanol at T = (313.15 and 353.15) K and pressures up to 2 MPa

In order to study the influence of amine structure on absorption of carbon dioxide, enthalpies of solution of CO₂ in 2.50 mol · L^?1 aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol (THAM), 2-[2-(dimethyl-amino)ethoxy] ethanol (DMAEOE), and 3-dimethyl-amino-1-propanol (DMAP) were measured. The enthalpies of solution are determined as function of gas loading charge (moles of CO₂/mole of amine), at temperatures (313.15 and 353.15) K, and pressures range from (0.5 to 2) MPa. Measurements were carried out using a flow calorimetric technique. CO₂ solubilities in the aqueous solutions of amine are derived from calorimetric data. Molar volumes of aqueous amine solutions required to handle calorimetric data were determined at 303.15 K using a vibrating tube densimeter. Experimental enthalpies of solution are discussed on the basis of amines alkalinity.     

Equilibrium solubility of carbon dioxide in (2-amino-2-methyl-1-propanol + piperazine + water)

In this work, a new set of values for the solubility of carbon dioxide in aqueous mixture containing different concentrations of 2-amino-2-methyl-1-propanol (AMP), a sterically-hindered amine, and piperazine (PZ), an activator, are presented. The results were carefully determined using a 1.0 dm³ stainless steel vapour-recirculation equilibrium cell at T = (313.2, 333.2, and 353.2) K, and pressures up to 152 kPa. The AMP concentrations in the ternary (solvent) mixture were (2 and 3) kmol · m^?3; those of PZ’s were (0.5, 1.0, and 1.5) kmol · m^?3. The measured equilibrium loading (solubility)/partial pressure pairs at different temperatures and concentration levels were generally consistent with the corresponding values correlated from the Kent–Eisenberg model that has been adapted for the system in the study, where the parameters of the models were determined using the results from this study and relevant data from literature.     

High-pressure phase equilibria of {carbon dioxide (CO2) + n-alkyl-imidazolium bis(trifluoromethylsulfonyl)amide} ionic liquids

Ionic liquids (ILs) and carbon dioxide (CO₂) systems have unique phase behavior that has been applied to applications in reactions, extractions, materials, etc. Detailed phase equilibria and modeling are highly desired for their further development. In this work, the (vapor + liquid) equilibrium, (vapor + liquid + liquid) equilibrium, and (liquid + liquid) equilibrium of n-alkyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide ionic liquids with CO₂ were measured at temperatures of (298.15, 323.15, 343.15) K and pressure up to 25 MPa. With a constant anion of bis(trifluoromethylsulfonyl)amide, the n-alkyl chain length on the cation was varied from 1-ethyl-3-methyl-imidazolium ([EMIm][Tf₂N]), 1-hexyl-3-methyl-imidazolium ([HMIm][Tf₂N]), to 1-decyl-3-methyl-imidazolium ([DMIm][Tf₂N]). The effects of the cation on the phase behavior and CO₂ solubility were investigated. The longer alkyl chain lengths increase the CO₂ solubility. The Peng–Robinson equation of state with van der Waals 2-parameter mixing rule with estimated IL critical properties were used to model and correlate the experimental data. The models correlate the (vapor + liquid) equilibrium and (liquid + liquid) equilibrium very well. However, extrapolation of the model to much higher pressures (>30 MPa) can results in the prediction of a mixture critical point which, as of yet, has not been found in the literature.     

Experimental investigation of incipient equilibrium conditions for the formation of semi-clathrate hydrates from quaternary mixtures of (CO2 + N2 + TBAB + H2O)

The three-phase (vapour + liquid + solid) equilibrium conditions for semi-clathrates formed from three mixtures of (CO₂ + N₂), in aqueous solutions of tetra-butyl ammonium bromide (TBAB), were measured in an isochoric reactor. The experiments were conducted at temperatures between (281 and 290) K, at pressures between (1.9 and 5.9) MPa and in aqueous TBAB solutions of w_TBAB = (0.05, 0.10, and 0.20). The experimental results obtained in this study were compared with previously obtained results for gas hydrates, formed from the same three mixtures of (CO₂ + N₂) and it was observed that semi-clathrates formed at a substantially lower pressure than did gas hydrates.     

Solubility and diffusion of CO2 and H2S in the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate

The solubility and diffusion coefficient were determined for carbon dioxide and hydrogen sulfide gases in the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([emim][EtSO₄]) at temperatures ranging from (303.15 to 353.15) K and pressures up to 1.6 MPa. The Krichevsky–Kasarnovsky equation was used to correlate solubility data and Henry’s law constants at different temperatures were obtained. The partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated using the solubility data. A semi-infinite volume approach is used to obtain the diffusion coefficients for CO₂ and H₂S and a correlation equation with temperature is presented for each gas. Comparison showed that H₂S is more soluble than CO₂ and its diffusion coefficient is about two orders of magnitude as that of CO₂ in the ionic liquid studied in this work.     

Measuring the solubility of CO2 and H2S in sulfolane and the density and viscosity of saturated liquid binary mixtures of (sulfolane + CO2) and (sulfolane + H2S)

The density and viscosity of liquid sulfolane saturated (loaded) with single CO₂ and H₂S gases were measured simultaneously with the solubility of the single CO₂ and H₂S gases in sulfolane at temperatures ranging from (303.15 to 363.15) K and pressures of up to about 2.4 MPa using a new experimental set-up developed in our laboratory. The experimental density and viscosity values were correlated using a modified Setchenow-type equation. It was observed that the density and viscosity of mixtures decrease by increasing temperature and acid gas solubility (loading) in sulfolane. Acid gas loading has a much profounder effect on the viscosity of solutions than on their density, i.e. at a concentration of 1 mol CO₂/H₂S per kg of sulfolane the density decreases by less than 3%, but viscosity decreases by more than 30%. Results show that at fixed temperature and pressure H₂S is more than four times as soluble as CO₂ in sulfolane. The measured solubility and density values were respectively used to obtain Henry’s law constants and partial molar volumes at infinite dilution for dissolution of CO₂ and H₂S gases in the liquid sulfolane at the temperatures studied. The Henry’s law constants obtained at different temperatures were used to determine infinite dilution partial molar thermodynamic functions (Gibbs free energy, enthalpy and entropy) of solution. The measured solubility data were correlated by using a model comprised of the extended Henry’s law and the Pitzer’s virial expansion for the excess Gibbs free energy.     

High-pressure phase equilibrium for the binary systems of {carbon dioxide (1) + dimethyl carbonate (2)} and {carbon dioxide (1) + diethyl carbonate (2)} at temperatures of 273 K, 283 K,and 293 K

Phase equilibrium data for the binary systems {carbon dioxide (CO₂) + dimethyl carbonate (DMC)} and {carbon dioxide (CO₂) + diethyl carbonate (DEC)} were measured at temperatures of 273 K, 283 K and 293 K in the pressure range of 0.5 MPa to 4.0 MPa. The measurements were carried out in a cylindrical autoclave with a moveable piston and an observation window. The experimental data were correlated with the Peng–Robison (PR) equation of state (EOS) and the Peng–Robinson–Stryjek–Vera (PRSV) equation of state with van der Waals-1 or Panagiotopoulos–Reid mixing rules. The correlations produced reasonable values for the interaction parameters. The comparisons between calculation results and experimental data indicate that the PRSV equation of state coupled with the Panagiotopoulos–Reid mixing rule produced the better correlated results.     

Solubility of methane and carbon dioxide in ethylene glycol at pressures up to 14 MPa and temperatures ranging from (303 to 423) K

This work reports solubility data of methane and carbon dioxide in ethylene glycol and the Henry’s law constant of each solute in the studied solvent at saturation pressure. The measurements were performed at (303, 323, 373, 398, and 423.15) K and pressures up to 6.3 MPa for mixtures containing carbon dioxide and pressures up to 13.7 MPa for mixtures containing methane. The experiments were performed in an autoclave type phase equilibrium apparatus using the total pressure method (synthetic method). All investigated systems show an increase of gas solubility with the increase of pressure. A decrease of carbon dioxide solubility with the increase of temperature and an increase of methane solubility with the increase of temperature was observed. From the variation of solubility with temperature, the partial molar enthalpy, and entropy change are calculated.     

Carbon dioxide solubility in aqueous potassium salt solutions of l-proline and dl-α-aminobutyric acid at high pressures

In the present work, the solubility of CO₂ in aqueous solutions of potassium prolinate (KPr) and potassium α-aminobutyrate (KAABA) was measured at temperatures (313.2, 333.2, and 353.2) K and CO₂ partial pressures up to 1000 kPa for amino acid salt concentrations: KPr, w = (7.5, 14.5, and 27.4 wt%) and KAABA, w = (6.9, 13.4, and 25.6 wt%). It was found that the CO₂ absorption capacities of the studied amino acid salt systems were considerably high and comparable with that of industrially important alkanolamines including monoethanolamine. The CO₂ loadings in aqueous potassium α-aminobutyrate at high pressures were also found to be generally higher than the loadings in aqueous potassium prolinate. A modified Kent–Eisenberg model was applied to correlate the CO₂ solubility in the amino acid salt solution as function of CO₂ partial pressure, temperature, and concentration. The model gave good representation of the (vapour + liquid) equilibrium data obtained for the amino acid salt systems studied, and provided accurate predictions of the solubility.     

Phase behavior of (CO2 + methanol + lauric acid) system

In this study the phase equilibrium behaviors of the binary system (CO₂ + lauric acid) and the ternary system (CO₂ + methanol + lauric acid) were determined. The static synthetic method, using a variable-volume view cell, was employed to obtain the experimental data in the temperature range of (293 to 343) K and pressures up to 24 MPa. The mole fractions of carbon dioxide were varied according to the systems as follows: (0.7524 to 0.9955) for the binary system (CO₂ + lauric acid); (0.4616 to 0.9895) for the ternary system (CO₂ + methanol + lauric acid) with a methanol to lauric acid molar ratio of (2:1); and (0.3414 to 0.9182) for the system (CO₂ + methanol + lauric acid) with a methanol to lauric acid molar ratio of (6:1). For these systems (vapor + liquid), (liquid + liquid), (vapor + liquid + liquid), and (solid + fluid) transitions were observed. The phase equilibrium data obtained for the systems were modeled using the Peng–Robinson equation of state with the classical van der Waals mixing rule with a satisfactory correlation between experimental and calculated values.     

Experimental study of high pressure phase equilibrium of (CO2 + NO2/N2O4) mixtures

Experimental bubble pressure, as well as liquid density of (CO₂ + NO₂/N₂O₄) mixtures are reported at temperatures ranging from (298 to 328.45) K. Experiments were carried out using a SITEC high-pressure variable volume cell. Transition pressures were obtained by the synthetic method and liquid density was deduced from measurement of the cell volume. Correlation of experimental results was carried out without considering chemical equilibrium of NO₂/N₂O₄ system. (Liquid + vapour) equilibrium was found to be accurately modelled using the Peng–Robinson equation of state with classical quadratic mixing rules and with a binary interaction coefficient k_ij equal to zero. Nevertheless, modelling of liquid density values was unsatisfactory with this approach.     

High-pressure (vapour + liquid) equilibria for ternary systems composed by {(E)-2-hexenal or hexanal + carbon dioxide + water}: Partition coefficient measurement

A new apparatus based on a static–analytic method assembled in this work was utilised to perform high-pressure (vapour + liquid) equilibria measurements of aqueous ternary systems. This work includes values of isothermal partition coefficients between CO₂ and water of two apple aroma constituents, (E)-2-hexenal and hexanal. Additionally, this work reports new experimental (vapour + liquid) equilibria measurements for the ternary systems (CO₂ + (E)-2-hexenal + water) and (CO₂ + hexanal + water), at fixed liquid phase composition (600 mg · kg⁻¹), at temperatures of (313, 323 and 333) K and at pressures from (8 to 19) MPa. Vapour liquid interphase was checked and monitored visually for all the systems studied in this work. No liquid immiscibility was observed at the composition, temperatures and pressures studied. In order to suggest reasonable operation conditions for fractionation of aromas with dense carbon dioxide, partition coefficients of the aroma compounds between CO₂ and water along with their separation factors from water were calculated. Partition coefficients of (E)-2-hexenal between CO₂ and water were in the range of (6 to 91) and where found to be near six times higher than those of hexanal (9 to 17). Very high separation factors from water were observed (∼10⁴) especially for (E)-2-hexenal. The highest separation factor, for both compounds, was found at a temperature of 313 K and pressures from (12 to 14) MPa.     

Experimental and theoretical investigation of solubility of carbon dioxide in concentrated aqueous solution of 2-amino-2-methyl-1-propanol and piperazine

In this work, new experimental results for the (vapour + liquid) equilibrium (VLE) of CO₂ in piperazine (PZ)-activated concentrated aqueous 2-amino-2-methyl-1-propanol (AMP) are presented for the temperature range of (303 to 328) K and PZ concentration range of (2 to 8) wt.%, keeping the total amine concentration in the solution at 40% and 50 wt.%. The partial pressures of CO₂ are in the range of (0.2 to 1500) kPa. The electrolyte non-random two-liquid (ENRTL) theory has been used to develop the VLE model for the quaternary system (CO₂ + AMP + PZ + H₂O) to describe the equilibrium behaviour of the solution. The CO₂ cyclic capacity of these solvents is determined between the rich and lean CO₂ loadings. It is found that the CO₂ cyclic capacity increases with the addition of PZ in aqueous AMP and also with the increase in AMP concentration in the aqueous solution. However, solid precipitation has been observed for 50 wt.% total amine concentration below T = 318 K for all relative compositions of AMP and PZ in the solvent at higher CO₂ loading. The model results of equilibrium composition, pH of the loaded solution and amine volatility of the mixed solvent system, are also presented.     

Solubility of CO2 in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]⁺) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF₆]^?), trifluoromethanesulfonate ([OTf]^?), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]^?) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky–Kasarnovsky equation and Henry’s law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO₂ in the ILs studied follows the same behaviour as the corresponding conventional 1-ethyl-3-methylimidazolium ([emim]⁺) based ILs with the same anions, i.e. [hemim][NTf₂] > [hemim][OTf] > [hemim][PF₆] > [hemim][BF₄].