Poly(N‐acetyl‐α‐acrylic acid): Synthesis,Characterization and Chelation Properties through Liquid Phase Polymer‐Based Retention Technique

The synthesis and characterization of the water‐soluble poly(N‐acetyl‐α‐acrylic acid) by radical polymerization were carried out. The polymer was characterized by Fourier Transform Infrared (FT‐IR), ¹H NMR and ¹³C NMR spectroscopies, and thermogravimetric analysis (TGA). The metal ion binding properties for the metals Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Hg(II), Cr(III) in the aqueous phase were studied using the liquid‐phase polymer‐based retention technique. The metal ion interactions with the hydrophilic polymer were determined as a function of pH and of the filtration factor. The polychelatogen showed a high affinity for metal ions and higher selectivity for Cr(III) at pH = 3.     

Matrix elimination method for the determination of precious metals in ores using electrothermal atomic absorption spectrometry

Poly(N-(hydroxymethyl)methacrylamide)-1-allyl-2-thiourea) hydrogels, poly(NHMMA-ATU), were synthesized by gamma radiation using ⁶⁰Co γ source in the ternary mixture of NHMMA-ATU-H₂O. These hydrogels were used for the specific gold, silver, platinum and palladium recovery, pre-concentration and matrix elimination from the solutions containing trace amounts of precious metal ions. Elimination of inorganic matrices such as different transition and heavy metal ions, and anions was performed by adjusting the solution pH to 0.5 that was the selective adsorption pH of the precious metal ions. Desorption of the precious metal ions was performed by using 0.8 M thiourea in 3 M HCl as the most efficient desorbing agent with recovery values more than 95%. In the desorption medium, thiourea effect on the atomic signal was eliminated by selecting proper pyrolysis and atomization temperatures for all precious metal ions. Precision and the accuracy of the results were improved in the graphite furnace-atomic absorption spectrometer (GFAAS) measurements by applying the developed matrix elimination method performing the adsorption at pH 0.5. Pre-concentration factors of the studied precious metal ions were found to be at least 1000-fold. Detection limits of the precious metal ions were found to be less than 10 ng L⁻¹ of the all studied precious metal ions by using the proposed pre-concentration method. Determination of trace levels of the precious metals in the sea-water, anode slime, geological samples and photographic fixer solutions were performed using GFAAS clearly after applying the adsorption-desorption cycle onto the poly(NHMMA-UTU) hydrogels.     

Studies in negative ion mass spectrometry. IX—electron capture by a series of tris- and bis-(dipivaloylmethanato) metal chelates

Electron capture data and negative ion mass spectra are reported for a series of tris- and bis-chelates of the types Metal·L₃, Metal·L₂, where L (or dpm) refers to the ligand or enolate ion of the β-diketone 2,2,6,6-tetramethyl-3,5-heptanedione (dipivaloylmethane) and the metals are: Sc(III), Cr(III), Mn(III), Fe(III), Co(III), Al(III), Ga(III), In(III), Co(II), Ni(II), Cu(II), Zn(II). The spectra were all very simple and the principal ions observed in all cases were the molecular anions and ligand ions. Reaction schemes have been established to account for the formation of ligand and other fragment ions, many of which carried less than 0.1% of the total ion currents. Variations in the negative ion mass spectra are attributed to the influence of the metal atom and its 3d electron configuration on the electron capture process. The simplicity of the negative ion mass spectra, together with the fact that many of these metal chelates gave relatively high total ion currents of c. 10^?9–10^?10 A, indicates the potential value of negative ion mass spectrometry in the area of ultra-trace metal analysis, and some estimates of detection limits for some of the metals considered in this study have been made.     

Chemically modified silica gel with p-dimethylaminobenzaldehyde for selective solid-phase extraction and preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by ICP-OES

Silica gel-bound amines phase modified with p-dimethylaminobenzaldehyde (p-DMABD) was prepared based on chemical immobilization technique. The product (SG-p-DMABD) was used as an adsorbent for the solid-phase extraction (SPE) Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The uptake behaviors of SG-p-DMABD for extracting these metal ions were studied using batch and column procedures. For the batch method, the optimum pH range for Cr(III) and Ni(II) extraction was ≥ 3, for Cu(II), Pb(II) and Zn(II) extraction it was ≥ 4. For simultaneous enrichment and determination of all the metals on the newly designed adsorbent, the pH value if 4.0 was selected. All the metal ions can be desorbed with 2.0 mL of 0.5 mol L^− 1 of HCl. The results indicate that SG-p-DMABD has rapid adsorption kinetics using the batch method. The adsorption capacity for these metal ions is in the range of 0.40-1.15 mmol g^− 1, with a high enrichment factor of 125. The presence of commonly coexisting ions does not affect the sorption capacities. The detection limits of the method were found to be 1.10, 0.69, 0.99, 1.10 and 6.50 μg L^− 1 for Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 5.0% (n = 8) for all metal ions. The method was applied to the preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) from the certified reference material (GBW 08301, river sediment) and water samples with satisfactory results.     

Organically modified silica gel and flame atomic absorption spectrometry: employment for separation and preconcentration of nine trace heavy metals for their determination in natural aqueous systems

A 5-formyl-3-(1′-carboxyphenylazo) salicylic acid-bonded silica gel (FCPASASG) chelating adsorbent was synthesized according to a very simple and rapid one step reaction between aminopropyl silica gel (APSG) and 5-formyl-3-(1′-carboxyphenylazo) salicylic acid (FCPASA) and its adsorption characteristics were studied in details. Nine trace metals viz.: Cd(II), Zn(II), Fe(III), Cu(II), Pb(II), Mn(II), Cr(III), Co(II) and Ni(II) can be quantitatively adsorbed by the adsorbent from natural aqueous systems at pH 7.0–8.0. The adsorbed metal ions can be readily desorbed with 1 M HNO₃ or 0.05 M Na₂EDTA. The distribution coefficient, K_d and the percentage concentration of the investigated metal ions on the adsorbent at equilibrium, C_M,_eqm % (Recovery, R%) were studied as a function of experimental parameters. The logarithmic values of the distribution coefficient, logK_d, are 3.7–6.4. Some foreign ions caused little interference in the preconcentration and determination of the investigated nine metals by flame atomic absorption spectrometry (AAS).The adsorption capacity of FCPASASG was 0.32–0.43 meq g⁻¹. C and N elemental analyses of the adsorbent (FCPASASG) allowed us to calculate a surface converge of 0.82 mmol g⁻¹. This value compares well with the best values reported for the azo compounds. The adsorbent and its formed metal chelates were characterized by IR (absorbance and/or reflectance) and UV spectrometry, potentiometric titrations and thermogravimetric analysis (TGA and DTG). The mode of chelation between the FCPASASG adsorbent and the investigated metal ions is proposed to be due to reaction of those metal ions with the salicylic and/or the carboxyphenylazo chelation centers of the FCPASASG adsorbent. Nanogram concentrations (0.07–0.14 ng ml⁻¹) of Cd(II), Zn(II), Fe(III), Pb(II), Cr(III), Mn(II), Cu(II), Co(II) and Ni(II) can be determined reliably with a preconcentration factor of 100.     

Liquid–liquid extraction of scandium with nalidixic acid in dichloromethane

The extraction behavior of nalidixic acid (HNA) in CH₂Cl₂ has been studied for various di- and trivalent metal ions such as Cu(II), Fe(II), Ni(II), Mn(II), Sb(II), Co(II), Sc(III), Y(III), Nd(III) and Eu(III) from aqueous buffer solutions of pH 1–7 with 0.1 mol dm⁻³ nalidixic acid in dichloromethane. Separation factors of Sc(III) from these metals has shown that its clean separation is possible at pH 3.4–4. The parameters affecting the extraction of Sc(III) were optimized. The composition of the extracted adduct was determined by slope analysis method that came out to be Sc(NA)₃. Extraction of Sc(III) was studied in the presence of various cations and anions. Among the anions studied only fluoride, citrate and oxalate have significant interference whereas, Fe(III) has reduced the extraction to 53% that can be removed by using ascorbic acid as reducing agent. The proposed extraction system proved good stability up to six extraction-stripping stages for the extraction of Sc(III).     

The use of Agrobacterium tumefacients immobilized on Amberlite XAD-4 as a new biosorbent for the column preconcentration of iron(III), cobalt(II), manganese(II) and chromium(III)

A microorganism Agrobacterium tumefacients as an immobilized cell on a solid support was presented as a new biosorbent for the enrichment of Fe(III), Co(II), Mn(II) and Cr(III) prior to flame atomic absorption spectrometric analysis. Amberlite XAD-4 was used as a support material for column preconcentration. Various parameters such as pH, amount of adsorbent, eluent type and volume, flow rate of sample solution, volume of sample solution and matrix interference effect on the retention of the metal ions have been studied. The optimum pH for the sorption of above mentioned metal ions were about 6, 8, 8 and 6, respectively. The loading capacity of adsorbent for Co(II) and Mn(II) were found to be 29 and 22 μmol g⁻¹, respectively. The recoveries of Fe(III), Co(II), Mn(II) and Cr(III), under the optimum conditions were found to be 99 ± 3, 99 ± 2, 98 ± 3 and 98 ± 3%, respectively, at the 95% confidence level. The limit of detection was 3.6, 3.0, 2.8 and 3.6 ng ml⁻¹ for Fe(III), Co(II), Mn(II) and Cr (III), respectively, by applying a preconcentration factor of 25. The proposed enrichment method was applied for metal ion determination from water samples, alloy samples, infant foods and certified samples such as whey powder (IAEA-155) and aluminum alloy (NBS SRM 85b). The analytes were determined with a relative error lower than 10% in all samples.     

Simultaneous determination of seven metal ions in water samples by solid-phase extraction on polyacrylonitrile activated carbon fibres

A new solid-phase extraction method utilising polyacrylonitrile activated carbon fibres (PAN-ACFs) as adsorbent was developed for the preconcentration of trace metal ions prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The PAN-ACFs oxidised with nitric acid were characterised by FT-IR, XRD, SEM and BET analysis. Then the resulting PAN-ACFs were used as solid-phase adsorbent for simultaneously determination of trace Al(III), Be(II), Bi(III), Cr(III), Cu(II), Fe(III) and Pb(II) ions in aqueous solutions. The influences of the analytical parameters on the recoveries of the studied ions were investigated. The optimum experimental conditions of the proposed method were pH: 6.0; eluent concentration and volume: 3.0 mL of 1.5 mol L^?1 nitric acid; flow rates of sample and eluent solution: 1.5 mL min^?1. The preconcentration factors were found to be 67 for Al(III), Bi(III); 83 for Cr(III), Cu(II), Fe(III) and 50 for Be(II), Pb(II). The precision of this method was in range of 1.5%~3.5% and the detection limit of this metal ions was between 0.06~1.50 μg L^?1. The developed method was validated by the analysis of a certified reference sample and successfully applied to the determination of trace metal ions in water samples with satisfactory results.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Solid phase extraction and determination of metal ions in aqueous samples using Quercetin modified Amberlite XAD-16 chelating polymer as metal extractant

A new chelating polymer has been developed using Amberlite XAD-16 anchored with Quercetin. The modified polymer was characterised by Fourier Transform Infra Red (FTIR) spectroscopy, thermogravimetric analysis, surface area analysis and elemental analysis. The Quercetin anchored polymer showed superior binding affinity for Cr(III), Mn(II), Fe(III), Co(II), Ni(II) and Cu(II) with greater than 95% adsorption under optimum conditions. The optimum pH conditions for the quantitative sorption of metal ions were studied. The developed method showed superior extraction qualities with high metal loading capacities of 387, 313, 195, 473, 210 and 320 µmol g^?1 for Cu(II), Co(II), Cr(III), Fe(III), Mn(II) and Ni(II), respectively. The rate of metal ion uptake i.e. kinetics studies performed under optimum levels, showed t _1/2 for Co(II), Cu(II), Cr(III), Fe(III), Mn(II) and Ni(II) is 20, 15, 25, 10, 30 and 15 min, respectively. Desorption of metal ions was effective with 10 mL of 2 M HCl prior to analysis using flame atomic absorption spectrophotometer. The chelating polymer was highly ion selective in nature even in the presence of interferent ions, with a high preconcentrating ability for the metal ions of interest. The developed chelating polymer was tested on its utility with synthetic and real samples like river, tap water samples and also with multivitamin tablets. It showed relative standard deviation (R.S.D.) values of/less than 3.0% reflecting on the accuracy and reproducibility of data using the newly developed chelating polymer.     

Solid Phase Extraction of Trace Metals in Seawater Using Morpholine Dithiocarbamate‐Loaded Amberlite XAD‐4 and Determination by ICP‐AES

Abstract

Application of morpholine dithiocarbamate (MDTC) coated Amberlite XAD‐4, for preconcentration of Cu(II), Cd(II), Zn(II), Pb(II), Ni(II) and Mn(II) by solid phase extraction and determination by inductively coupled plasma (ICP) atomic emission spectrometry (AES) was studied. The optimum pH values for quantitative sorption of Cu(II), Cd(II), Zn(II), Pb(II), Ni(II), and Mn(II) were 6.5–8.0, 7.0–8.5, 6.0–8.5, 6.5–8.5, 7.5–9.0, and 8.0–8.5, respectively. The metals were desorbed with 2 mol L^?1. The t_1/2 values for sorption of metal ions were 2.6, 2.9, 2.5, 2.6, 3.0, and 3.8 min respectively for Cu(II), Cd(II), Zn(II), Pb(II), Ni(II) and Mn(II). The effect of diverse ions on the determination of the previously named metals was studied. Simultaneous enrichment of the six metals was accomplished, and the method was applied for use in the determination of trace metal ions in seawater samples.     

Use of Di(n-butyl) and Di(iso-butyl)dithiophosphoric Acids as Complexing Agents in the TLC Separation of Some d and f Transition Metal Ions

The thin layer chromatographic behavior of U(VI), Th(IV), lanthanides(III), Co(II), Ni(II), and Cu(II) on silica gel H with di(n-butyl) and di(iso-butyl)dithiophosphoric acids as complexing agents in the organic mobile phase has been investigated. The results obtained show that the dithiophosphate anion has a substantial effect on the migration of these metal ions. The presence of electron-donor solvents in the mobile phase increases retention, especially for U(VI), Th(IV), and lanthanides(III). The effect is explained on the basis of greater solubility of the metal chelates of the dithiophosphoric anions in the organic mobile phase, because of a solvation process. Separation was investigated for three groups of metal ions — actinides, lanthanides, and d transition metals. By choice of an appropriate organic mobile phase, separation of the pairs Th(IV)-U(VI), Pr(III)-Sm(III), Sm(III)-Gd(III), and Gd(III)-Er(III) was achieved, as was separation of Co(II), Ni(II), and Cu(II) from each other. A complex separation mechanism based on adsorption-desorption, cation exchange, and extraction is suggested.

     

Chemically-modified activated carbon with ethylenediamine for selective solid-phase extraction and preconcentration of metal ions

A new method that utilizes ethylenediamine-modified activated carbon (AC-EDA) as a solid-phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Fe(III), Hg(II) and Pb(II) prior to the measurement by inductively coupled plasma optical emission spectrometry (ICP-OES). The new sorbent was prepared by oxidative surface modification. Experimental conditions for effective adsorption of trace levels of Cr(III), Fe(III), Hg(II) and Pb(II) were optimized with respect to different experimental parameters using batch and column procedures in detail. The optimum pH value for the separation of metal ions simultaneously on the new sorbent was 4.0. Complete elution of absorbed metal ions from the sorbent surface was carried out using 3.0 mL of 2% (%w/w) thiourea and 0.5 mol L⁻¹ HCl solution. Common coexisting ions did not interfere with the separation and determination of target metal ions. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 39.4, 28.9, 60.5 and 49.9 mg g⁻¹ for Cr(III), Fe(III), Hg(II) and Pb(II), respectively. The time for 94% adsorption of target metal ions was less than 2 min. The detection limits of the method was found to be 0.28, 0.22, 0.09 and 0.17 ng mL⁻¹ for Cr(III), Fe(III), Hg(II) and Pb(II), respectively. The precision (R.S.D.) of the method was lower 4.0% (n = 8). The prepared sorbent as solid-phase extractant was successfully applied for the preconcentration of trace Cr(III), Fe(III), Hg(II) and Pb(II) in natural and certified samples with satisfactory results.     

金属硫蛋白加质子常数及与Cd(II)络合常数测定

用pH计和Cd离子选择电极测定了金属硫蛋白的加质子常数及其与Cd(Ⅱ)的络合常数, 用改进的简化络合模型处理实验结果, 得到了去金属硫蛋白(apo MT)中6类不同的加质子基团的数目及其加质子常数。对Cd(Ⅱ)滴定数据的计算表明, MT中两个结构域——α和β对Cd(Ⅱ)的络合常数相差约1000倍。从热力学定量描述了MT中两个结构域结合金属离子选择优先顺序。     

Liquid—liquid extraction of transition metals with acylthioacetamides

The extraction behaviour of acylthioacetamides, R¹—CO—CH₂—CS—NR²R³, was studied for a series of transition metals. The highest distribution ratios were obtained with benzoylthioacetanilide. Complexes with acylthioacetamides which were completely substituted on the amide group were extracted slowly. The ranking of the extraction characteristics is related to the different pK_a values of the compounds used. Polymerization and solvation reactions can be excluded at metal concentrations of ? 10^-3 mol dm^-3 and extractant concentrations of ?10^-1 mol dm^-3, respectively. Decreasing extractability, Cu(II) > Zn(II) > Ni(II) > Co(II) > Cd(II), corresponds to the stability constants of the extracted metal chelates. Iron(III) cannot be extracted at pH ?3; Hg(II), Pd(II), and Au(III) are extracted readily over a reasonably wide pH range. The different extraction constants for zinc(II) and cadmium(II) permit an effective separation of these ions with benzoylthioacetanilide.     

Trace Analysis of Heavy Metals with Two New Disodium Bisdithiocarbamates

Two chelating reagents, disodium N,N′-dibenzylethylenebisdithiocarbamate 1 and disodium piperazinebisdithiocarbamate 2, were synthesized and used to preconcentrate trace metals in aqueous samples. For analysis of Cu(II) using a UV-vis spectrometer, Beer's law was obeyed from 5.0 μg L^?1 to 6.0 mg L^?1 for reagent 1, and from 0.2 mg L^?1 to 6.0mg L^?1 for reagent. 2. The chelation ratio for reagent 1 to Cu(II) was determined to be 1:1, with a formation constant 1.0 × 10⁹ M^?l. The dependence of extraction and extraction efficiency of reagent 1 on pH was also studied with an atomic absorption spectrometer for nine heavy-metal ions-Cu(II), Fe(III), Pb(II), Co(II), Cr(VI), Ni(II), Zn(II), Mn(II) and Cd(II). Except Cr(VI) and Mn(II), the recovery yields of the other seven metal ions were almost quantitative at pH = 4 ? 6. The recovery was 82% for Cr(VI) at pH = 4 ? 5, and 52% for Mn(II) at pH = 6 ? 7.     

Flame Atomic Absorption Spectrometric Determination of Cu(II), Co(II), Cd(II), Fe(III) and Mn(II) in Ammonium Salts and Industrial Fertilizers after PrEconcentration/Separation on Diaion HP-20

A sensitive and simple separation-enrichment technique for the determination of trace amounts of Cu(II), Co(II), Cd(II), Fe(III) and Mn(II) was described. Metal ions were complexed with 1-nitroso-2-naphthol at pH 9. Following solid-phase extraction on Diaion HP-20 resin, metals were determined by flame atomic absorption spectrometry. The effect of the matrix ions were investigated. The recoveries of metal ions were greater than 95%. The detection limits of the analyte ions ( k = 3, N = 21) were varying 0.18 µg/l for Cd(II) to 0.44 µg/l for Fe(III). The method was applied to a stream sediment standard reference material (GBW7309), some ammonium salts and industrial fertilizer samples for the determination of copper, cobalt, cadmium, iron and manganese. The relative standard deviations (RSD) of the determinations for analyte ions at µg/g levels varied from 1 to 10%.     

Extraction of Sm(III), Gd(III) and Ho(III) ions with picrolonic acid in methylisobutylketone

Summary Picrolonic acid (HPA) in methylisobutylketone (MIBK) (0.01 mol^. dm^-3) has been used for the extraction of lanthanide(III) ions such as Sm(III), Gd(III) and Ho(III) (Me) (~3^. 10^-6mol^. dm^-3) from pH 1-2 buffer solutions of 0.1 mol^. dm^-3(H⁺, Cl^-) ionic strength and quantitative extraction (>95%) was found at pH 2. Through slope analysis the composition of the organometallic adduct responsible for the extraction came out to be M(PA)₃. The conditional equilibrium constant values, log K_ex, were deduced to be 2.60±0.01, 2.09±0.01 and 1.44±0.03 for these lanthanide(III) ions, respectively. The metals in concentration up to ~2.5^. 10^-4mol^. dm^-3can be quantitatively extracted by the proposed system. Among the various anions, fluoride, oxalate and cyanide ions (~3.0^. 10^-4mol^. dm^-3) and, among the cations, Zn(II) Cu(II), Co(II) and Fe(III) reduced the lanthanide extraction. The extraction of various other metal ions at the optimized conditions of Me extraction for this series of lanthanide ions was also studied and high separation factors (10²-10³) were obtained showing the good selectivity of this extraction system.     

A new selective and high affinity polymeric complexing agent for transition metal ions

Summary The synthesis and characteristics of a new chelating glycinohydroxamate-containing polymer resin is described. The functionality of the polymer is 1.76 mmolg^–1. The hydrogen capacity, water regain and adsorption capacities for iron(III), cadmium(II), cobalt(II), copper(II), nickel(II) and zinc(II) were measured at various pH values; uptake of the metal ions increased with pH and was quantitative above pH 3 for most of the metal ions. All cations studied showed high exchange rates towards the resin. The half saturation times for iron(III), cadmium(II), copper(II) and zinc(II) were all less than 1 min. The coordination behaviour of the resin was studied with the help of e.p.r., i.r., u.v. and potentiometry. The pK _a of the resin is 10.70 and the log value of the stability constants for iron(III), copper(II), lead(II), zinc(II), cobalt(II), manganese(II), cadmium(II) and nickel(II) were measured as 21.81, 19.50, 19.20, 18.59, 18.51, 18.46, 18.37 and 18.36, respectively, at 25 ° C and I = 0.2M KCl.     

Chelating properties of poly(N‐acryloyl piperazine) by liquid‐phase polymer‐based retention (LPR) technique

The synthesis of poly(N‐acryloylpiperazine) was carried out by radical polymerization giving a yield of 90%. The polymer was soluble in water and was characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopy, and TGA. The metal ability binding properties for the Ag(I), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II), and Cr(III) metal ions in the aqueous phase were investigated using the liquid‐phase polymer‐based retention (LPR) method. The metal ion interactions with the hydrophilic polymers were determined as a function of pH and filtration factor.