Optical Recognition of Anions by Ruthenium(II)-Bipyridine-Calix[4]Arene System

The two t-butylcalix[4]arene attached ruthenium(II)-bipyridine complexes (Rubc2 and Rubc3) has been synthesized and the anion recognition studies have been carried out using emission techniques. The binding of anions, which are sensed by the complexes, are studied by UV-visible and emission techniques. The complex Rubc2 recognizes the Cl^?, H₂PO₄ ^? and AcO^? anions. The complex Rubc3 recognizes the Br^? and AcO^? anions. The AcO^? quenches the emission intensity of both two complexes but the other anion increases the emission intensity of the complexes. The excited state lifetime and transient absorption studies were carried out the AcO^? facilitates non radiative pathway. The other anions stabilize the excited state and facilitate the radiative pathway.     

Design of Two Pyrazole-Based Sensors with Similar Configuration and Different Fluorescent Response to Anions

Two simple fluorescent anion receptors based on 1-phenyl-3-methylpyrozole-5-one-4-one phenylhydrazone (L1) and 1-phenyl-3-methylpyrozole-5-one-4-one p-nitrophenylhydrazone (L2) were designed, synthesized and characterized with ¹H NMR, COSY spectrum, ¹³C NMR, ESI-mass and elemental analyse. Interestingly, two receptors with similar configuration exhibited different anion binding behaviors in DMSO solution. The results of Job plots and ESI-mass spectrum indicate that L1 bind anions such as F⁻, AcO⁻, H₂PO₄⁻ to form 2:1 host-guest complexation, while L2 bind anions to form 1:1 host-guest complexation in the solution.     

含酚羟基席夫碱的合成及其阴离子识别

设计和合成一个基于3,5-二叔丁基水杨醛-p-硝基苯腙含酚羟基的新型阴离子受体1. 在加入AcO^-和F^-后,受体1发生从深黄色到紫色的颜色变化. 然而,在加入其它阴离子(H₂PO₄^-, Cl^-, Br^-, I^-)没有明显的颜色变化. 通过紫外和荧光滴定研究了受体与AcO^-和F^-结合的性质.     

Study on the Selectivity of Anion Receptors Based on Similar (thio)urea Fragments

Three new selective anion receptors containing the (thio)urea binding sites were developed, Indole-3-formaldehyde phenyl-semithiocarbazone, Indole-3-formaldehyde nitrophenyl-semithiocarbazone, and Indole-3-formaldehyde nitrophenyl-semicarbazone, nominated as receptors 1, 2 and 3, respectively. Receptor 1 shows high selective recognition for F^? only, while both receptor 2 and receptor 3 containing a p-nitro group show high selective recognition for AcO^?. The high selective recognition of these receptors to anions is further investigated by X-ray crystallography diffraction, UV-vis, fluorescence analyses and ¹H NMR. Furthermore, receptor 2 changes from yellow to orange, and receptor 3 darkens when acetate is added, providing a way of detection by ‘naked-eye’.     

Synthesis,Characterization and Luminescence Sensitivity with Variance in pH,DNA and BSA Binding Studies of Ru(II) Polypyridyl Complexes

Three ruthenium(II) polypyridyl complexes, [Ru(phen)₂(mip)](ClO₄)₂ (1) (phen =1,10-Phenanthroline), [Ru(bpy)₂(mip)](ClO₄)₂ (2) (bpy = 2,2’bipyridyl) and [Ru(dmb)₂(mip)](ClO₄)₂ (3) (dmb = 4, 4′-dimethyl 2, 2′-bipyridine), were synthesized with an intercalative ligand mip (2-morpholino-1H-imidazo[4,5-f][1, 10]phenanthroline) and characterized by ¹H, ¹³C–NMR, IR, UV-vis, mass spectra and elemental analysis. pH effect, ion selectivity (cations, anions) and solvent sensitivity of complexes were studied. The interaction of these complexes with DNA was performed using absorption, emission spectroscopy and viscosity measurements. The experimental results indicated that the two complexes interacted with calf thymus DNA (CT-DNA) by intercalative mode. BSA (Bovine Serum Albumin) protein binding of these complexes was studied by UV-visible and fluorescence techniques. The binding capacity of these complexes was explained theoretically by molecular docking method.     

Complexing equilibria of Ag(I) ion in the presence of heterocyclic amines in DMSO. Comparison with other solvents

The stability constants of Ag(I) complexes with aromatic heterocyclic amines: pyridine (py), 2,2′-bipyridine (bipy), 1,10-phenantroline (phen), 2,2′-bipyridil-6′-phenyl (bpp) and 2,2′:6′,2″-terpyridine (tp) as well as with saturated cyclic amines: piperidine (ppd), piperazine (ppz), 1,4-diazacycloheptane (dach), 1,4,7-triazacyclononane (tacn) and 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (tmtact) have been determined in DMSO using potentiometry. The polarizability and dipole moments of the investigated amines have been calculated by means of AM1 and PM3 methods (from the MOPAC 6 packet). The role of the Ag(I) ion and ligand solvation in thermodynamics of the complex formation process in four solvents (H₂O, AN, PC, DMSO) has been discussed.     

A novel colorimetric receptor responding AcO anions based on an azo derivative in DMSO and DMSO/water solution

A novel and efficient receptor based on the phenylhydrazone derivatives is successfully developed and applied to the acetate anion recognition, indicating that the origin of special preference for acetate (AcO⁻) anion maybe the structure well matching between the host and the guest. The sensor changes its color so obviously on addition of the acetate ions and that may make the naked-eye recognition in DMSO and even in DMSO/H₂O (95/5) solution come true. Also, the anion binding ability determinations were performed by UV-vis titration and ¹H NMR titration experiments with different anions in the solutions mentioned. The fluorescence enhancement can also be observed after the host is coordinated with the AcO⁻ anion and excited by light wavelength at 280 nm.     

A C2-symmetric ratiometric fluorescence and colorimetric anion sensor based on pyrrole derivative

A C₂-symmetric fluorescence and colorimetric anion sensor (1) based on pyrrole derivative was designed and synthesized according to binding site-signaling subunit approach. The compound 1 was easily prepared by reaction of pyrrole-2,5-dicarboxaldehyde with 4-nitrophenylhydrazine in ethanol (yield=78%). In DMSO, the sensor 1 exhibited a visible color change from red to brown upon exposure to anions such as AcO⁻ and F⁻; however, no obvious color changes were observed when the other tested anions (e. g. H₂PO₄⁻, Cl⁻, Br⁻ and I⁻) were added. There was a significant redshift (Δλ_max=160 nm) in UV-vis spectrum during UV-vis spectral titrations. In particular, the sensor 1 showed ratiometric fluorescence responses to anions.     

Exposure of [MnIII6CrIII]3+ single-molecule magnets to soft X-rays: The effect of the counterions on radiation stability

X-ray absorption spectroscopy studies of the [Mn^III₆Cr^III]³⁺ single-molecule magnet deposited as a microcrystalline layer on gold substrates are presented. The oxidation state of the manganese centers changes from Mn^III to Mn^II due to irradiation with soft X-rays. The influence of the charge-neutralizing anions on the stability of [Mn^III₆Cr^III]³⁺ against soft X-ray exposure is investigated for the different anions tetraphenylborate (BPh₄^?), lactate (C₃H₅O₃^?) and perchlorate (ClO₄^?). The exposure dependence of the radiation-induced reduction process is compared for [Mn^III₆Cr^III]³⁺ with the three different anions.     

He(I) photoelectron spectroscopy of anions in adiponitrile solution

He(I) photoelectron spectra are reported of solutions of salts in adiponitrile in which peaks characteristic of the anions are visible; the vertical ionisation energies of these peaks are 6.91 and 7.85 (I^?), 7.6 (Br^?), 8.1 (Cl^?), 7.0 (CNS^?), 8.1 and 6.8 (NO₂^?), and 7.6eV (SO₄^2?). The salts examined were tetra-n-butyl ammonium (NO₂^?, I^?, Br^?, Cl^?, CNS^?, SO₄^2?), N-methylpyridinium I^?, trimethylphenylammonium I^?, choline I^?, methyltrioctylammonium I^? and methyltriphenylphosphonium Br^?. The relationship between these spectra and the charge transfer to solvent spectra of the anions is discussed.     

The key Cl− ligand for metal‐to‐ligand charge transfer in mononuclear terpyridine ruthenium(II) and binuclear ruthenium(II) tetrapyridylpyrazine complexes

Electronic structures of binuclear ruthenium complexes [Ru₂(terpy)₂(tppz)]⁴⁺ ( 1A ) and [Ru₂Cl₂(L)₂(tppz)]²⁺ {L = bpy ( 2A ), phen ( 3A ), and dpphen ( 4A )} were studied by density functional theory calculations. Abbreviations of the ligands (Ls) are bpy = 2,2′‐bipyridine, phen = 1,10‐phenanthroline, dpphen = 4,7‐diphenyl‐1,10‐phenanthroline, terpy = 2,2′:6′,2″‐terpyridine, and tppz = tetrakis(2‐pyridyl)pyrazine. Their mononuclear reference complexes [Ru(terpy)₂]²⁺ ( 1B ) and [RuClL(terpy)]⁺ {L = bpy ( 2B ), phen ( 3B ), and dpphen ( 4B )} were also examined. Geometries of these mononuclear and binuclear Ru(II) complexes were fully optimized. Their geometric parameters are in good agreement with the experimental data. The binuclear complexes were characterized by electrospray ionization mass spectrometry, UV–Vis spectroscopy, and cyclic voltammograms. Hexafluorophosphate salts of binuclear ruthenium complexes of 3A and 4A were newly prepared. The crystal structure of binuclear complex 1A (PF₆)₄ was also determined. Orbital interactions were analyzed to characterize the metal‐to‐ligand charge‐transfer (MLCT) states in these complexes. The Cl^? ligand works to raise the orbital energy of the metal lone pair, which leads to the low MLCT state. Copyright © 2011 John Wiley & Sons, Ltd.     

Transition moment variation in the A2Σ+ → X2Πi transition of HCl+, DCl+ and HBr+

Relative emission intensities of sixteen bands of HCl⁺ (A²Σ⁺ - X²Π_i), four bands of DCl⁺ (A²Σ⁺ - X²Π_i), and 5 bands of HBr⁺ (A²Σ - X²Π_i) have been made using both ion-beam excitation and microwave discharge sources. Intensities were determined by comparison with computer-generated spectra. Treatment of the data within the r-centroid approximation shows that in HCl⁺ the electronic transition moment decreases strongly at large $\text{r}{}_{\mathrm{v\prime v″}}$ [$\text{Re}\text{α}\text{exp}\text{(?3.6}\text{r}{}_{\mathrm{v\prime v″}}\text{)}\text{for 1.44}\text{A}\text{?}\text{< r}{}_{\mathrm{v\prime v″}}\text{< 1.82}\text{A}\text{?}$] but levels off at shorter $\text{r}{}_{\mathrm{v\prime v″}}$. DCl⁺ data agree quantitatively with HCl⁺. The variation in the HBr⁺ moment is similar, with $\text{R}\text{e}\text{α}\text{exp}\text{[?4.5}\text{r}{}_{\mathrm{v\prime v″}}\text{]}\text{for 1.58}\text{A}\text{?}\text{<}\text{r}{}_{\mathrm{v\prime v″}}\text{< 1.78}\text{A}\text{?}$.     

The First Bifluoride Sensor Based on Fluorescent Enhancement

The first fluorescent sensor for HF₂ ^? anion, N¹, N³-di(naphthalene-1-yl)isophthalamide (L) has been derived from α-Napthylamine and isopthaloyl chloride. In 1:1 (v/v) DMSO:H₂O, L exhibits high selectivity towards HF₂ ^? anion with a 4-fold enhancement in fluorescent intensity. Very little enhancement in fluorescence intensity is observed for F^?, Cl^?, Br^?, I^?, SCN^?, PO₄ ^3?, SO₄ ^2?, and CH₃COO^? anions. The stoichiometry interaction between L and HF₂ ^? is found to be 1:1 from fluorescence and UV/Visible spectral data. DFT calculation shows that binding between HF₂ ^? and L is 1:1 and increases the relative planarity between the two naphthyl rings causing fluorescence enhancement. A shift of 0.080 V in oxidation potential of L is observed on interaction with HF₂ ^? by cyclic voltammetry and square wave voltammetry.     

Curcumin as a colorimetric and fluorescent chemosensor for selective recognition of fluoride ion

The binding properties of curcumin with anions in acetonitrile were examined for the first time by UV-vis absorption and fluorescence spectroscopies. The results showed that curcumin highly and selectively responded to F⁻ over other anions such as AcO⁻, H₂PO₄⁻ and Cl⁻ because of anionic complex formation via hydrogen bond. Curcumin gave rise to the red-shift of absorption spectra and its fluorescence was quenched with concomitant color change from yellow to purple upon addition of F⁻, which was detected by naked eyes. The addition of other anions such as AcO⁻, H₂PO₄⁻, HSO₄⁻, NO₃⁻, Cl⁻ and Br⁻ did not result in observable spectral change and solution color change. The binding constant between curcumin and F⁻ was 2.0×10⁵ mol⁻¹ L and the recognizing mechanism was investigated as well.     

Ultrasound-assisted synthesis of water-soluble monosubstituted diruthenium compounds

The elusive monosubstituted diruthenium complexes [Ru₂Cl(DAniF)(O₂CMe)₃] (1), [Ru₂Cl(DPhF)(O₂CMe)₃] (2), [Ru₂Cl(D-p-CNPhF)(O₂CMe)₃] (3), [Ru₂Cl(D-o-TolF)(O₂CMe)₃] (4), [Ru₂Cl(D-m-TolF)(O₂CMe)₃] (5), [Ru₂Cl(D-p-TolF)(O₂CMe)₃] (6) and [Ru₂Cl(p-TolA)(O₂CMe)₃] (7) have been synthesized using for the first time ultrasound-assisted synthesis to carry out a substitution reaction in metal–metal bonded dinuclear compounds (DAniF⁻ = N,N′-bis(4-anisyl)formamidinate; DPhF⁻ = N,N′-diphenylformamidinate; D-p-CNPhF⁻ = N,N′-bis(4-cyanophenyl)formamidinate; D-o/m/p-TolF⁻ = N,N′-bis(2/3/4-tolyl)formamidinate; p-TolA⁻ = N-4-tolylamidate). This is a simpler and greener method than the tedious procedures described in the literature, and it has permitted to obtain water-soluble complexes with good yields in a short period of time. A synthetic study has been implemented to find the best experimental conditions to prepare compounds 1–7. Two different types of ligands, formamidinate and amidate, have been used to check the generality of the method for the preparation of monosubstituted complexes. Five new compounds (2–6) have been obtained using a formamidinate ligand, the synthesis of the previously described compound 1 has been improved, and an unprecedented monoamidate complex has been achieved (7). The crystal structures of compounds 3 and 7 have been solved by single crystal X-ray diffraction. These compounds show the typical paddlewheel structure with three acetate ligands and one formamidinate (3) or amidate (7) bridging ligand at the equatorial positions. The axial positions are occupied by the chloride ligand giving rise to one-dimensional polymer structures that were previously unknown for monosubstituted compounds.     

Sonochemical synthesis of a new nano-sized barium coordination polymer and its application as a heterogeneous catalyst towards sono-synthesis of biodiesel

A new nano-sized barium coordination polymer, {(bipyH)[Ba₂(pydc)₂(Hpydc)(H₂O)₂]}_n·nH₂O (1), (bipy = 4,4′-bipyridine and H₂pydc = pyridine-2,6-dicarboxylic acid), has been sonochemically synthesized and fully characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRPD), FT-IR spectroscopy, thermogravimetric analysis (TGA) and elemental analyses. Compound 1 was structurally characterized by single crystal X-ray diffraction and it was shown that this compound consists of 1D anionic coordination polymers and bipyH⁺ cationic species that construct a three-dimensional supramolecular architecture via non-covalent interactions i.e. ion-pairing and hydrogen bonding. The role of compound 1 as a heterogeneous catalyst in the production of biodiesel was also investigated. A full conversion of soybean oil to biodiesel was accomplished in an exceptionally short timeframe through an ultrasonic-assisted transesterification process in the presence of compound 1.     

Tuning Photophysical and Electrochemical Properties of Phosphorescent Heteroleptic Iridium Complex Salts–as Chemosensors

Photophysical and electrochemical studies of cyclometalated cationic heteroleptic iridium(III) complex salts have been carried out. For these complex salts the intense absorption bands appeared around 263 nm and are assigned to spin-allowed π-π* transitions of phenanthroline ligands. Moderately intense and weak absorption bands observed around 341 and 440 nm, respectively. These bands are assigned to spin-allowed metal to ligand charge transfer ¹MLCT and ³MLCT transitions, respectively. The influence of anions and proton on the photophysical and electrochemical studies were also carried out. The emission wavelength was red shifted and emission color changed from yellow to red by the addition of CF₃CO₂H. The solution color changed from green to brown and the emission was quenched by the addition anions such as of F^?, CH₃COO^? and H₂PO₄ ^?.     

High-level ab initio studies of NO(X2Π)–O2(X3Σg −) van der Waals complexes in quartet states

Geometry optimisations were performed on nine different structures of NO(X²Π)–O₂(X³Σ_g^?) van der Waals complexes in their quartet states, using the explicitly correlated RCCSD(T)-F12b method with basis sets up to the cc-pVQZ-F12 level. For the most stable configurations, counterpoise-corrected optimisations as well as extrapolations to the complete basis set (CBS) were performed. The X structure in the ⁴A′ state was found to be most stable, with a CBS binding energy of ?157 cm^?1. The slipped tilted structures with N closer to O₂ (Slipt-N), as well as the slipped parallel structure with O of NO closer to O₂ (Slipp-O) in ⁴A″ states have binding energies of about ?130 cm^?1. C_2v and linear complexes are less stable. According to calculated harmonic frequencies, the X isomer is bound. Isotropic hyperfine coupling constants of the complex are compared with those of the monomers.     

Sonochemical synthesis and characterization of nano-sized lead(II) 3D coordination polymer: Precursor for the synthesis of lead(II) oxybromide nanoparticles

Nanoparticles of a three-dimensional coordination polymer, [Pb(L)(μ₂-Br)(H₂O)]_n (1), (L^? = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by an ultrasonic method and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal (DTA) analyses and compared each other. Concentration of initial reagents effects and the role of power ultrasound irradiation on size and morphology of nano-structured compound 1, have been studied. Calcination of the compound 1 at 500 °C under air atmosphere yields Pb₃O₂Br₂ nanoparticles.     

Rotational analysis of the B-X band system of the SbO molecule

Rotational analyses of the two 0-0 bands of theB ²ΣX ²Π_reg system of SbO were carried out for the first time from spectrograms taken in the second order of a 21 ft. concave grating spectrograph having a dispersion of 1·25 Å/mm. The rotational constants of the ν=0 vibrational levels of the upper and lower states, and of the coupling constant A₀ of the lower²Π_reg state were deduced. These values are summarised below. v₀₀=25 334·93 cm^?1 B′₀=0·3190 cm^?1 B″₀=0·3490 cm^?1 A ₀=2276 cm^?1 r′₀=1·933 Å r″₀=1·848 Å.