中国散裂中子源磁铁系统和样机研制

中国散裂中子源(China Spallation Neutron Source, CSNS)快循环同步加速器(Rapid Cycling Synchrotron, RCS)磁铁由24块二极磁铁、48块四极磁铁、16块六极磁铁和若干斜四极磁铁以及校正磁铁组成, 其中二极磁铁和四极磁铁是带直流偏置的25Hz正弦交流励磁, 铁芯和线圈导体将产生不可忽视的涡流效应. 为了积累批量生产磁铁的制造经验, 探索磁铁后期处理和磁场测量方法, 已完成了中空水冷铝绞线试样线圈的研制, 启动了二极磁铁和四极磁铁样机的研制. 本文将对相关进展进行介绍.     

Transient electromagnetic simulation and thermal analysis of the DC-biased AC quadrupole magnet for CSNS/RCS

Due to the large eddy currents at the ends of the quadrupole magnets for CSNS/RCS, the magnetic field properties and the heat generation are of great concern. In this paper, we take transient electromagnetic simulation and make use of the eddy current loss from the transient electromagnetic results to perform thermal analysis. Through analysis of the simulated results, the magnetic field dynamic properties of these magnets and a temperature rise are achieved. Finally, the accuracy of the thermal analysis is confirmed by a test of the prototype quadrupole magnet of the RCS.     

Simulation on buildup of electron cloud in a proton circular accelerator

Electron cloud interaction with high energy positive beams are believed responsible for various undesirable effects such as vacuum degradation, collective beam instability and even beam loss in high power proton circular accelerators. An important uncertainty in predicting electron cloud instability lies in the detailed processes of the generation and accumulation of the electron cloud. The simulation on the build-up of electron cloud is necessary to further studies on beam instability caused by electron clouds. The China Spallation Neutron Source(CSNS) is an intense proton accelerator facility now being built, whose accelerator complex includes two main parts: an H-linac and a rapid cycling synchrotron(RCS). The RCS accumulates the 80 Me V proton beam and accelerates it to 1.6 Ge V with a repetition rate of 25 Hz. During beam injection with lower energy, the emerging electron cloud may cause serious instability and beam loss on the vacuum pipe. A simulation code has been developed to simulate the build-up,distribution and density of electron cloud in CSNS/RCS.     

超导磁约束系统中超导磁体涡流损耗的研究

在超导磁约束系统中,超导磁体与射频场、磁场、声场、电场等复合场的兼容耦合是系统稳定运行的关键。探讨了在13.56 MHz频率下的Shoji型天线产生的高频电磁波对超导磁体的影响,高频电磁波会在超导磁体表面产生涡流损耗,进而产生功率损耗并生成热量,导致超导磁体失超。为避免失超现象的发生,在超导磁体室温孔内采用金属屏蔽层进行防护。利用COMSOL软件对整个电磁-射频非线性耦合场进行建模仿真分析,完成了屏蔽层结构的优化选择。基于计算结果,分析讨论了屏蔽层厚度和高度变化对超导磁体上涡流损耗功率的变化影响。通过对超导磁体涡流损耗功率随屏蔽层参数变化进行拟合,最终得到了优化后的屏蔽层参数。     

交直流叠加磁化下恒导磁薄片的反常涡流损耗

本文利用一致畴转模型分析了在交直流叠加磁化下恒导磁薄片的低频涡流损耗。指出涡流损耗的反常不仅壁移,而且同样存在于畴转。其原因是畴转过程中畴内磁导率是张量,从而比经典模型增加了一项“侧向涡流”。导出了转动涡流损耗反常系数η_r的表达式;并将结果在某些应用领域中作了推广,得出了相应的结论。     

SC-200质子加速器输运部磁体电源的输出纹波形成机理分析及其Simplorer仿真

介绍了质子治疗加速器输运部二极磁铁电流源的技术要求、主电路拓扑。该电源要求输出电流精度为25ppm，纹波小于25ppm。电源输出电流纹波由低频纹波和高频纹波组成。对电源输出电流纹波的形成机理进行了详细的理论分析和数学计算。得出了基于冲量控制原理的脉冲宽度调制(PWM)电流跟踪控制技术可以有效消除输入低频纹波对输出电流的影响。同时也对输出电流高频纹波采用两种方法进行了定量的数学分析，并得出量化的结论和计算公式。借助AnsoftSimplorer电路仿真软件构建模型，验证了纹波规律结论及计算公式的准确性，并且提出了相应的纹波抑制策略。     

Vibration research of the AC dipole-girder system for CSNS/RCS

The China Spallation Neutron Source (CSNS) is a high intensity proton accelerator based facility. Its accelerator complex includes two main parts: an H^- linac and a rapid cycling synchrotron (RCS). The RCS accumulates the 80 MeV proton beam and accelerates it to 1.6 GeV, with a repetition rate of 25 Hz. The AC dipole of the CSNS/RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibration. The vibration will influence the long-term safety and reliable operation of the magnet. The dipole magnet of CSNS/RCS is an active vibration equipment, which is different from the ground vibration accelerator. It is very important to design and study the dynamic characteristics of the dipole-girder system. This paper takes the AC dipole and girder as a specific model system. A method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The ANSYS simulation method plays a very important role in the girder structure design stage. With this method, the mechanical resonance phenomenon was avoided in the girder design time. At the same time the dipole vibratory force will influence the other equipment through the girder. Since it is necessary to isolate and decrease the dipole vibration, a new isolator was designed to isolate the vibratory force and decrease the vibration amplitude of the magnet.     

中国散裂中子源快循环同步加速器主准直器的设计与研究

为满足强流加速器对准直器高散热性能、高抗辐射性能、超高真空、高定位精度、高稳定性和在线实时调整等特殊要求,在CSNS/RCS主准直器设计时针对结构方案和控制方案进行了详细设计和研究,针对关键部件:刮束器、真空盒、驱动装置和远程快速拆卸装置等设计难点进行了阐述,在设计中使用ANSYS完成了刮束器的热分析及支架强度和变形校核,用FLUKA程序对辐射屏蔽进行了分析和设计,确保主准直器设计的可靠性。     

Eddy current septum magnets for injection and extraction at SSRF

There are 6 in-vacuum eddy current septum magnets used for booster injection,extraction,and storage ring injection in SSRF.Special attention was paid to coils and their support designs because of the shock force they bear in the magnetic fields and the high heat which is hard to be dissipated in vacuum environment.For the storage ring magnets,good transverse homogeneity in the gap was achieved by careful design,precise machining and accurate assembly;and an extremely low leakage field on the stored beam is another key feature thanks to the high permeability Mu metal.Magnetic field measurement was conducted with both a point coil and a long integral coil,and the results agree well with the OPERA-2d/3d simulations.An inner tube is added to keep the continuity of impedance for the circulating beam with two RF finger flanges at each end.There is no vacuum separation between the inner tube and the magnet chamber.Sputter ion pumps integrated with NEG are used to acquire the UHV for the chamber.     

用α能损法测量薄膜厚度所需真空度的确定方法

用能损法测量薄膜厚度及其厚度分布的均匀性是一种有效的新方法,但这种测量必须在真空室内进行,如何恰当地选择真空度对于提高测量精度和降低真空系统的建造成本都具有重要意义。通过采用SRIM软件模拟5.486 MeV 粒子在空气中的阻止本领,计算出在不同真空度时,从241Am源发出粒子穿过不同距离达到探测器时的能量损失,得到粒子能量损失与真空度的关系。根据这一关系,结合所建能谱仪在测量过程中的稳定性和重复性,建立了用粒子测量薄膜厚度所需真空度的确定方法,并用这一方法得到了在源与探测器距离为2~8 cm时,小于100 Pa的真空度能完全满足测量要求的结果。     

基于二阶矢量位的矩形截面回折线圈阻抗和脉冲磁场的解析建模与计算

本文基于二阶矢量位建立了回折线圈的阻抗和磁场计算的解析模型,并提出了计算磁场脉冲响应的方法.根据回折线圈用于涡流检测和电磁超声检测时的通用模型,将回折线圈的阻抗和磁场计算问题转化为多个单匝矩形线圈阻抗和磁场的叠加问题.基于二阶矢量位和时谐电磁场方程,推导了回折线圈的频域标势表达式;利用标势与矢量磁位和磁通密度间的关系,推导了计算区域的磁通密度和式样表面涡流的频域解析计算公式;通过计算线圈的感应电势和阻抗变化表达式,得到了线圈阻抗的频域解析表达式;采用FFT-IFFT方法计算了脉冲磁场的时域响应.以一双层双 关键词： 无损检测 回折线圈 二阶矢量位 解析建模     

On the Cost of Ion Production in Radio-Frequency Ion Thrusters and Technological Ion Sources

The power balance in the inductive discharge of a radio-frequency ion source is worked out by calculating the power losses caused by plasma deposition on the surfaces bordering it, by the power consumed for positive-ion generation and pre-acceleration, by eddy currents, and by propellant-atom excitation. The relationship between the minimal consumption of high-frequency power per unit of ion current of the thruster and electron temperature and geometric parameters of the gas-discharge chamber is presented.     

用于太赫兹光源的准等时性储存环的设计

介绍了一种获得准等时性储存环的方案,即调节Lattice参数,在色散段引入负色散函数从而降低线性滑相因子,获得短束团。根据此方案设计了用于相干太赫兹光源的准等时性储存环,结果给出了线形光学函数曲线以及粒子的动力学孔径,表明了通过调节四极铁参数可以达到降低束团长度获得准等时性储存环的目的。还设计了用于准等时性储存环弯铁处的真空室的3维模型,并对其类腔体部分的本征模进行了计算,得到特性阻抗与品质因数的比值在10-3量级以下,表明类腔体部分对束流的影响很小。     

Incomplete-penetration hysteresis losses in transmission line cables

At 77 K, the resistivity of ceramic, high-temperature superconductors grows gradually rather than sharply with increasing current. The critical-state theory of hysteresis losses therefore needs to be modified. This has been done for slab conductors whose resistivity can be taken proportional to a power of the current density. Simple formulas have been derived in the limiting cases of incomplete penetration and full penetration when the losses are driven either by a sinusoidal transport current or a sinusoidal external magnetic field. These formulas can be applied to multilayer transmission line cables once the current distribution within and among the layers has been determined. This distribution has been calculated (in the incomplete penetration limit) by solving Maxwell's field equations. A formula is presented for the dependence of the hysteresis loss on winding angle. The formula is used to determine the optimum winding angle.     

Space charge limiting current of an electron beam transported in a coaxial drift chamber

An expression for the space charge limiting current of an electron beam in a vacuum coaxial drift chamber is obtained in the strong field approximation. The expression is an analogue of the Bogdankevich-Rukhadze interpolation formula for a cylindrical drift chamber. The space charge limiting currents in the coaxial and cylindrical chambers are compared. The space charge limiting current in the vacuum coaxial chamber is numerically calculated and compared to analytical predictions.     

3 MV感应电压叠加器的磁感应腔研制

 根据脉冲驱动源和负载参数,提出了3 MV感应电压叠加器磁感应腔的设计指标为1.2 MV/70 ns。由感应腔的电流传输效率和真空同轴线绝缘要求,确定了磁芯的几何尺寸;研制了矩形比为0.5的预退火非晶磁环,明确磁环数量不少于6只;在30 T/s时,实验测量的最大脉冲相对磁导率与饱和波模型计算结果相当;估算磁感应腔的等效激磁电感约为7.3 μH,涡流损耗电阻约为139 Ω。根据临界击穿场强的经验公式,采用电场数值分析方法,确定了磁感应腔的电气结构;实验验证了磁感应腔设计有效性;建立了基于磁感应腔的3 MV感应电压叠加器全电路模型,阳极杆箍缩二极管电压、电流计算波形,与实验结果基本相符。     

The compensation of quadrupole errors and space charge effects by using trim quadrupoles

The China Spallation Neutron Source (CSNS) accelerators consist of an H-linac and a proton Rapid Cycling Synchrotron (RCS). RCS is designed to accumulate and accelerate proton beam from 80 MeV to 1.6 GeV with a repetition rate of 25 Hz. The main dipole and quadruple magnet will operate in AC mode. Due to the adoption of the resonant power supplies, saturation errors of magnetic field cannot be compensated by power supplies. These saturation errors will disturb the linear optics parameters, such as tunes, beta function and dispersion function. The strong space charge effects will cause emittance growth. The compensation of these effects by using trim quadruples is studied, and the corresponding results are presented.     

Identification of magnet and superconductor contributions to the ac loss in a magnet-superconductor levitation system

By measuring the quality factor of the mechanical oscillator with an attached magnet we investigated the amplitude dependence of the energy loss in a permanent magnet-YBCO superconductor system. When a non-conducting ferrite magnet is used the energy loss is proportional to the amplitude to the 2.79 power. This value is close to the value of 3 expected for the hysteretic motion of flux lines from the Bean model. When a conducting magnet is used the exponent decreased to the value of 2.5. This reflects the contribution of eddy current dissipation in a conducting magnet to the overall loss. We identified a novel mechanism of ac loss in the magnet-superconductor system. According to this mechanism the eddy current in a magnet is induced by the ac field generated by the ac supercurrent in response to the motion of a magnet. This mechanism would take place in a rotary bearing if circumferential inhomogeneity of the rotor magnetization occurred.     

Level-set based topology optimization for electromagnetic dipole antenna design

This paper presents a level-set framework for a typical electromagnetic design problem of dipole antenna. In this study, the geometrical configuration of an antenna is represented by the zero-level contour of a higher-dimensional level-set function. The governing equation for the induced current flow on a metal surface is the Electric Field Integral Equation (EFIE), which takes into account the electric component of the incident wave. The design objective is formulated in terms of the surface current and incident electric field. The normal velocity of the level-set model, which reflects the sensitivity of the objective function, is derived from the adjoint variable method and shape derivative. By optimizing the objective function, the area with the highest current density, to which the voltage feeding should be applied, can be reshaped. The advantages of adopting the level-set technique for electromagnetic design lie in its capacity for capturing sophisticated topological changes and facilitation in mathematical representation of the design configuration. The demonstrative examples of dipole antenna design show that the level-set method results in a fairly smooth optimization process, where the vacuum/metal interface gradually attains its optimal configuration. A series of design cases with self-adjoint and non-self-adjoint sensitivity analyses are studied and compared to the benchmarking problems in dipole antenna.     

Effect of the sheath resistivity and tape geometry on eddy current loss in Bi(2223) tapes

We have made a software electromagnetic simulation of eddy current effects in Bi(2223)Ag sheathed tapes with applied AC transport current in a broad frequency range. We have used simple models of monocore and multicore tapes. Calculated is the power distribution (W/m³) within the metal sheath using the geometry of real tapes. The numerical simulation is carried out with Finite-element-method software. The paper also describes the influence of the tape cross-sectional architecture and the sheath resistivity on the eddy current loss.