Optical absorption of tetraphenylporphyrin thin films in UV-vis-NIR region

The optical absorption of thermally-evaporated tetraphenylporphyrin (TPP), in the UV-vis-NIR region has been studied. The absorption spectra recorded in the UV-vis region for the as-deposited and annealed films showed different absorption bands, namely the Soret, B, at region 360-490 nm, Q-band region consist of four bands in the region 500-720 nm and two other bands labeled N and M in UV region. The Soret band always shows splitting in all the TPP thin films and the effect of annealing on the intensities of these components have been observed. The spectra of the infrared absorption allow characterization of vibrational modes for the powder, as deposited and annealed thin films. Some of the optical absorption parameters, namely molar extinction coefficient (epsilon), half band width (Deltalambda), electronic dipole strength (q2), and oscillator strength (f), of the principal optical transitions have also been evaluated.     

Optical absorption of sodium copper chlorophyllin thin films in UV-vis-NIR region

The optical absorption studies of sodium copper chlorophyllin thin films (SCC), prepared by spray pyrolysis, in the UV-vis-NIR region was reported for the first time. Several new discrete transitions are observed in the UV-vis region of the spectra in addition to a strong continuum component in the IR region. The spectra of the infrared absorption allow characterization of vibration modes for the powder and thin films of SCC. The absorption spectrum recorded in the UV-vis region showed different absorption bands, namely the Soret (B) in the region 340-450 nm and Q-band in the region 600-700 nm and other band labeled N in the 240-320 region. Some important spectral parameters namely optical absorption coefficient (alpha), molar extinction coefficient (epsilon(molar)), oscillator strength (f), electric dipole strength (q(2)) and absorption half bandwidth (Deltalambda) of the principle optical transitions were evaluated. The analysis of the absorption coefficient in the absorption region revealed direct transitions and the energy gap was estimated as 1.63 eV. Discussion of the obtained results and their comparison with the previous published data are also given.     

Optical absorption of tetraphenylporphyrin thin films in UV-vis-NIR region

The optical absorption of thermally evaporated tetraphenylporphyrin (TPP) in the UV-vis-NIR region have been studied. The absorption spectra recorded in the UV-vis region for the as deposited and annealed films showed different absorption bands, namely the Soret(B) at region 360-490nm, Q-band region consist of four bands in the region 500-720nm and two other bands labeled N and M in UV region. The Soret band always shows its characteristic effect splitting in all the TPP thin films and the effect of annealing on the intensities of these components have been observed. The spectra of the infrared absorption allow characterization of vibrational modes for the powder, as deposited and annealed thin films. Some of the optical absorption parameters, namely molar extinction coefficient, varepsilon, half band width, Deltalambda, electronic dipole strength, q(2) and oscillator strength, f, of the principle optical transitions have also been evaluated.     

NIR to UV absorption spectra and the optical constants of phthalocyanines in glassy medium

Optical absorption studies of phthalocyanines (Pc-s) in borate glass matrix have been reported for the first time. Measurements have been done corresponding to photon energies between 1.1 and 6.2 eV for free base, manganese, iron, nickel, molybdenum, cobalt and copper phthalocyanines. Several new discrete transitions are observed in the UV-vis region of the spectra in addition to a strong continuum component of absorption in the IR region. Values of some of the important optical constants viz. absorption coefficient (alpha), molar extinction coefficient (epsilon), absorption cross-section (sigma(a)), band width (delta lambda), electric dipole strength (q2) and oscillator strength (f) for the relevant electronic transitions are also presented. All the data reported for Pc-s in the new matrix have been compared with those corresponding to solution, vapor and thin film media.     

Studies on charge transfer properties from mixture of Schiff base and zinc complex in Langmuir-Blodgett film by UV-vis absorption and Fourier transform infrared spectroscopy

A novel mixed Langmuir Blodgett (LB) film based on a 1:1 (molar ratio) mixture of a non-amphiphile complex (Et4N)2[Zn(dmit)2] (H2dmit = 4,5-dimercapto-1,3-dithiole-2-thione) and Schiff base amphiphile 2,4-dihydroxy-N-octadecylbenzylideneamine (SBC18) was constructed and characterized by Fourier transform infrared (FTIR) spectra and UV-vis electronic absorption spectra. After iodine was doped in situ, magnitude of charge transfer increases, which was demonstrated by FTIR and UV-vis absorption spectral analysis.     

Electron irradiation induced microstructural modifications in BaCl2 doped PVA: A positron annihilation study

Thin films of pure and 10 wt% BaCl₂ doped poly(vinyl alcohol) (PVA) were prepared by solution casting method. These films were subjected to electron irradiation for different doses ranging from 0 to 400 kGy in air at room temperature. The effect of electron irradiation on the optical and free volume related microstructures of these polymer films was studied using positron annihilation lifetime spectroscopy, FTIR and UV-vis techniques. The FTIR spectral studies indicate that the electron irradiation induces chemical modifications within the doped PVA, which results in chain scission as well as cross-linking of the polymer. The positron lifetime study on these irradiated polymers shows that the chain scissions and cross-linking within the polymer matrix affect the free volume content and hence the microstructure. The UV-vis optical absorption studies show that the induced microstructural change by electron irradiation also modifies the optical properties. Using UV-vis spectra, the optical energy band gap was estimated and it decreases with increase in electron dose. A correlation between positron results and optical results is obtained and electron irradiation induced microstructure modifications within the doped polymer are understood. The results highlight the usefulness of positron annihilation technique in the study of the microstructure of irradiated polymers.     

Self assembly and optical properties of dendrimer nanocomposite multilayers

Ultrathin multilayers are important for electrical and optical devices, as well as for immunoassays, artificial organs, and for controlling surface properties. The construction of ultrathin multilayer films by electrostatic layer-by-layer deposition proved to be a popular and successful method to create films with a range of electrical, optical, and biological properties. Dendrimer nanocomposites (DNCs) form highly uniform hybrid (inorganic-organic) nanoparticles with controlled composition and architecture. In this work, the fabrication, characterization, and optical properties of ultrathin dendrimer/poly(styrene sulfonate) (PSS) and silver-DNC/PSS nanocomposite multilayers using layer-by-layer (LbL) electrostatic assembly techniques are described. UV-vis spectra of the multilayers were found to be a combination of electronic transitions of the surface plasmon peaks, and the regular frequency modulations attributable to the multilayered film structure. The modulations appeared as the consequence of the highly regular and non-intermixed multilayer growth as a function of the resulting structure. A simple model to explain the experimental data is presented. Use of DNCs in multilayers results in abrupt, flat, and uniform interfaces.     

Photoluminescence properties of BaMoO4 amorphous thin films

BaMoO₄ amorphous and crystalline thin films were prepared from polymeric precursors. The BaMoO₄ was deposited onto Si wafers by means of the spinning technique. The structure and optical properties of the resulting films were characterized by FTIR reflectance spectra, X-ray diffraction (XRD), atomic force microscopy (AFM) and optical reflectance. The bond Mo-O present in BaMoO₄ was confirmed by FTIR reflectance spectra. XRD characterization showed that thin films heat-treated at 600 and 200 °C presented the scheelite-type crystalline phase and amorphous, respectively. AFM analyses showed a considerable variation in surface morphology by comparing samples heat-treated at 200 and 600 °C. The reflectivity spectra showed two bands, positioned at 3.38 and 4.37 eV that were attributed to the excitonic state of Ba²⁺ and electronic transitions within MoO²⁻₄, respectively. The optical band gaps of BaMoO₄ were 3.38 and 2.19 eV, for crystalline (600 °C/2 h) and amorphous (200 °C/8 h) films, respectively. The room-temperature luminescence spectra revealed an intense single-emission band in the visible region. The PL intensity of these materials was increased upon heat-treatment. The excellent optical properties observed for BaMoO₄ amorphous thin films suggested that this material is a highly promising candidate for photoluminescent applications.     

Recombination luminescence of poly(arylene phthalide) films: 1. Electronic and optical features of poly(arylene phthalide)s

Features of the luminescence and absorption spectra of poly(biphenylene phthalide), poly(fluorenylene phthalide), and poly(terphenylene phthalide) films were analyzed. Experimental results obtained for these films by optical methods and thermally stimulated current spectroscopy were compared. Long-lasting afterglow emission from the films after photoexcitation was observed. Possible explanations for the observed optical and thermally stimulated processes in the poly(arylene phthalide)s were suggested in terms of reversible electronic phase transitions induced by external factors in unconjugated polymers.     

不同类型二苯乙烯衍生物双光子吸收截面的理论研究

用AM1和INDO/CI理论方法,系统研究不同类型二苯乙烯衍生物(D-π-D,A-π-A,D-π-A)的结构和电子光谱。在正确的UV-vis光谱基础上,预测了双光子吸收峰的位置,用SOS公式计算了三阶非线性光学系数及双光子吸收截面,并从微观上探讨了不同取代基对双光子吸收截面的影响。     

四(十六烷硫基)四硫富瓦烯/硬脂酸混合LB膜的结构研究

我们考察了四(十六烷硫基)四硫富瓦烯/硬脂酸(THT-TTF:SA=1:n)在气-液界面的聚集状态及在LB膜中的排列,当n=1时,THT-TTF分子在气-液界面形成了双分子膜;当n>6时,THT-TTF分子形成了单分子膜;1相似文献   

Spectrophotometric, conductometric and thermal studies of Co(II), Ni(II) and Cu(II) complexes with 2-(2-hydroxynaphthylazo)-4-hydroxy-6-methyl-1,3-pyrimidine

The electronic absorption spectra of 2-(2-hydroxynaphthylazo)-4-hydroxy-6-methyl-1,3-pyrimidine in pure organic solvents of different polarities and in buffer solutions of varying pH are studied. The important bands in the IR and the main signals in the (1)H NMR spectra are assigned. The observed UV-vis absorption bands are assigned to the corresponding electronic transitions. The molecular stoichiometry, stability constant, absorption maximum, molar absorptivity and Sandell's sensitivity of the complexes are calculated. Obeyence to Beer's law and Ringbom optimum concentration ranges are also determined. The ability of using the titled azodye as metalochromic indicator in complexometric titrations was also studied. The effect of Co(II), Ni(II) and Cu(II) ions on the fluorescence of the azodye is also considered. The solid Cu(II) complexes of the titled azodye have been prepared and characterized by elemental, IR, UV-vis spectra as well as by conductometric and magnetic measurements. The data suggest square planar geometry for 1:1 and 1:2 (M:L) complexes. The thermal behaviour of the complexes has been studied. The kinetic parameters (n, E, A, deltaH, DeltaS and deltaG) of the thermal decomposition steps are computed using Coats-Redfern equations.     

稀土Eu(Ⅲ)双酞菁衍生物LB膜的荧光性

合成了八－４－（四氢糠氧基）酞菁铕（Ⅲ）,通过元素分析、红外光谱、质谱和紫外－可见光谱加以确认。测定了配合物的ＩＩ－Ａ曲线,证明它有很好的成膜性,Ｚ型沉积形成的ＬＢ膜材料有很强的荧光响应,随着ＬＢ膜厚度的增加,荧光性增强。掺杂邻菲咯啉形成的混合ＬＢ膜,其荧光性比纯膜强。但不是邻菲咯啉加入的量越多荧光性越强。配合物：邻菲咯啉＝１：１０时（摩尔比）,有最好的荧光行为。用电子光谱对ＬＢ膜的结构进行了表征     

全息用光致聚合物中双单体组分对材料性能的影响

本文研究了薄膜型光致聚合物材料中双单体(2-苯氧基乙基丙烯酸酯和N-乙烯基咔唑)的不同配比对材料聚合效率的影响.用红外光谱测定了双组分单体在固体薄膜中光反应条件下的竟聚率,分析了双组分单体在全息记录过程中的聚合情况.针对同一点多角度复用的大容量存储要求,提出了双单体薄膜型光致聚合物的理想模型.初步测定了不同摩尔配比条件下材料的全息存储性能,分析了其中的影响因素.     

二苯乙烯衍生物和二噻吩并噻吩衍生物的双光子吸收截面的理论研究

用AMI和INDO/CI理论方法,系统研究了二苯乙烯衍生物和二噻吩衍生物的结构和电子光谱。在正确的UV-vis光谱基础上,预测了双光子吸收峰的位置。用完全态求和(SOS)公式计算了三阶非线性光学系数及双光子吸收截面,并从微观上探讨了不同骨架以及不同取代基对双光子吸收截面的影响。     

UV-visible spectroscopic studies on the platinum-metal pentafluorides

The diffuse reflectance UV-vis spectra of RuF₅, RhF₅, OsF₅, IrF₅ and PtF₅ have been recorded for the first time and assigned on the basis of the strong-field model and optical electronegativity approach. The electronic transitions are interpreted in terms of a pseudo-tetragonally distorted octahedral field at the metal centres, which affords insights into the intense colours of these complexes.     

Comparison of protein surface attachment on untreated and plasma immersion ion implantation treated polystyrene: protein islands and carpet

Surface attachment of the enzyme horseradish peroxidase (HRP) was studied on untreated and ion beam implanted polystyrene (PS) films. The PS films of 100 nm thickness on a silicon wafer were treated using the plasma immersion ion implantation (PIII) technique, with argon ions of energy 20 keV and fluences of up to 2 x 10(16) ions/cm2. Differential transmittance Fourier transform infrared (FTIR) spectra confirmed the presence of proteins on the PS surfaces by detection of the amide A, I, and II protein vibrations. Spectroscopic ellipsometry over the UV-vis spectral region provided the optical constants and thickness of the protein layer, while tapping mode atomic force microscopy (AFM) was used to image the protein distribution on the surface. The combination of AFM, ellipsometry, and FTIR analysis showed that, on the untreated PS surface, HRP formed islands 8 nm in height and 30 nm in lateral size, covering approximately 27% of the PS surface. After PIII modification of the PS surface, the protein covered 100% of the surface area.     

Development of an optical ammonia sensor based on polyaniline/epoxy resin (SU-8) composite

Polyaniline (PANI)/glycidyl ether of bisphenol A (SU-8) composite film is elaborated in order to detect ammonia gas. These composite films are characterized by ultraviolet-visible (UV-vis) spectroscopy, Fourier transformed infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The sensitivity to ammonia is measured by optical absorption changes. The ammonia sensing properties of PANI/SU-8 composite films are studied, and then are compared to pure PANI films elaborated by chemical way. Experimental results show that the PANI/SU-8 optical sensor has simultaneously a rapid response to ammonia gas and regenerates easily, that is advantageous compared to pure PANI films.     

Controlling the electronic coupling between CdSe quantum dots and thiol capping ligands via pH and ligand selection

Comparison of the UV-vis absorption spectra of CdSe quantum dots (QDs) capped with various mercaptocarboxylic acid capping ligands reveals that only 4-mercaptobenzoic acid (MBzA) capping ligands lower the apparent optical band gap. We propose that the delocalization of the excitons in the CdSe QDs is extended onto the ligands via electronic coupling to the π system of the 4-mercaptobenzoic acid molecules through the Cd-S bond. Furthermore, we demonstrate that the electronic coupling between the QDs and the (MBzA) thiol ligands is influenced by the strength of the Cd-S bond that can be changed by protonating the S atom.     

Optical Properties of Swift Heavy Ion Beam Irradiated Polycarbonate/Polystyrene Composites Films

Polycarbonate/polystyrene composites films were irradiated by 55 MeV Carbon ion beam with fluence ranging from 1 × 10¹¹ to 1 × 10¹³ ions/cm². The polymer composites films were prepared by solution mixing method. The effects of ion beam on structural, optical and surface morphology of PC/PS composites films were investigated by X-ray diffraction (XRD), UV-visible spectroscopy (UV-vis), Fourier Transform Infrared Spectroscopy (FT-IR) and Optical Microscope. The XRD pattern shows the average crystallite size, percentage of crystallinity and inter-chain separation, which decreases with increase in ion fluences. UV-vis spectra show that the energy band gap and transmittance decreases while number of carbon atoms increases with fluences. The FT-IR spectra evidenced very small change in cross linking and chain scissoring at high ion fluences, while the optical microscopy shows a color change with ion fluence.