Stereospecific solid-state [2+2] autophotocycloaddition of a styryl dye containing a 18-crown-6 fragment

A procedure was developed for the synthesis of a 18-crown-6-containing styryl dye of the pyridine series. Phototransformation products of the dye that formed upon irradiation with visible light in solution, films, and crystals were studied by ¹H and ¹³C NMR spectroscopy and spectrophotometry. Irradiation of solutions of this dye in acetonitrile leads only to reversible E-Z photoisomerization of the C=C bond. Irradiation of a film of the dye induces stereospecific [2+2] photocycloaddition to form exclusively the rctt isomer of tetrasubstituted cyclobutane. The latter was found to undergo base-catalyzed isomerization giving rise to the rcct isomer. X-ray diffraction study showed that photocycloaddition occurs in single crystals without their destruction. The structures of the E isomer of the dye and the resulting rctt isomer of the cyclobutane derivative were established. The characteristic features of the molecular packing of the dye favorable for topochemical photocycloaddition in the crystal and the structural changes that accompany the cyclobutane formation are discussed. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1896–1908, August, 2005.     

Design of crystal packings of styrylheterocycles and [2+2] photocycloaddition reactions in their single crystals 7. Crystal structures of 4-styrylpyridine hydroperchlorates and solid-state [2+2] autophotocycloaddition reactions of these compounds

A series of 4-styrylpyridine hydroperchlorates were synthesized, and the [2+2] autophotocycloaddition (PCA) reaction in their polycrystalline films and single crystals resulting in the centrosymmetric rctt isomers of 1,2,3,4-tetrasubstituted cyclobutanes was investigated. Unlike neutral styrylpyridines, their protonated forms are better preorganized for the solid-state PCA reaction. According to the X-ray diffraction data, the cations of these compounds, like related styryl dyes, are mainly stacked in crystals in a head-to-head or head-to-tail fashion with equal probability. Only in the latter type of stacks, the PCA reaction is feasible as a single-crystal-to-single-crystal transformation. The crystal packing is stabilized by hydrogen bonds between organic cations and perchlorate anions, as well as by other weak directional interactions, for example, by S??S interactions, thus preventing the atomic displacements in the course of PCA. The completion of the PCA reaction in single crystals without their degradation was observed only for 15-crown-5-containing 4-styrylpyridine hydroperchlorate. The crystals of the latter compound are stabilized not by hydrogen bonds between the cations and anions but by N⁺-H??O(macrocycle) hydrogen bonds resulting in the formation of head-to-tail stacked dimers. In the crystals, these dimers are surrounded by a soft shell formed by rotationally and translationally mobile anions and benzene solvent molecules, as well as by conformationally flexible crown-ether moieties of adjacent dimer pairs. This leads to a decrease in the steric strain that occurs in the crystals in the course of PCA and prevents the degradation of single crystals. The PCA reaction is accompanied by the reduction in the crystal symmetry due to the doubling of the unit cell.     

Stereospecific [2+2] autophotocycloaddition in the dimeric complex of 18-crown-6 ether styryl dye bearing N-(3-ammoniopropyl) substituent

New 18-crown-6 ether styryl dye of the 4-pyridine series bearing N-(3-ammoniopropyl) substituent has been synthesized. In MeCN, the dye forms a stable dimeric complex of the syn-head-to-tail type due to the complexation of the ammonium group of one molecule with the crown ether fragment of another. In the dimeric complex, the ethylene bonds of the molecules are close in space and antiparallel, which promotes an efficient stereospecific [2+2] autophotocycloaddition to yield the only rctt-isomer of 1,2,3,4-tetrasubstituted cyclobutane. The cyclobutane derivative structure was confirmed by NMR spectroscopy and X-ray diffraction.     

Styryl dyes. Synthesis and study of the solid-state [2+2] autophotocycloaddition by NMR spectroscopy and X-ray diffraction

New styryl dyes of the pyridine and benzothiazole series were synthesized with the aim of investigating the solid-state [2+2] autophotocycloaddition (PCA) reaction. The ¹H NMR spectroscopy showed that for most of the compounds under study, the visible light irradiation of thin polycrystalline films of the dyes affords cyclobutane derivatives. The rate of the photoreaction depends on the structure of the dye and is higher for compounds, which contain a short N-substituent in the heterocyclic moiety and have strong absorption in the visible region. Dyes bearing electron-releasing substituents in the benzene ring undergo the stereospecific PCA in the syn-head-to-tail dimeric pair to give the only rctt isomer of cyclobutane derivatives. Electron-withdrawing and bulky substituents in the benzene fragment of styryl dyes extend the range of the mutual orientations of the molecules in the dimeric pairs, resulting in the formation of two or even four isomeric cyclobutanes in the PCA reactions. The structures of some dyes were established by X-ray diffraction. In the overwhelming majority of the structures, one of two packing modes, either syn-head-to-tail or syn-head-to-head, with extensive stacking interactions is observed. A rare example of the anti-head-to-head stacking mode was found for the dicationic dye containing the bulky N⁺(Et)Me₂ substituent in the benzene ring. The syn-head-to-tail and anti-head-to-head stacking modes can facilitate the PCA reaction due to the close spatial proximity of the ethylenic bonds and their parallel orientation in the dimeric pairs of the dye molecules. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1797–1819, September, 2007.     

Photoisomerization and [2 + 2] photocycloaddition in bichromophoric styrylbenzoquinoline dyads with <Emphasis Type="Italic">o</Emphasis>-xylylene bridge group

Photochemical properties of bis(styrylbenzoquinoline) dyads in which two styrylbenzoquinoline (SBQ) moieties are bridged by an o-xylylene group linked to their styryl groups via oxy- and carboxy-functional groups have been studied. Two competitive reactions, photoisomerization of the SBQ moieties and stereoselective [2 + 2] photocycloaddition (PCA) to give tetrasubstituted cyclobutane, occur under irradiation. It is assumed that PCA occurs with participation of an intramolecular excimer, in which the photochemical process of dimerization to cyclobutane dominates over the photophysical process of fluorescence, because the emission band of the excimer is not observed in an explicit form in the fluorescence spectra of dyads.     

Supramolecular assembler based on cucurbit[8]uril: Photodimerization of a styryl dye in water

Photolysis of aqueous solutions of styryl dye 1 in the presence of cucurbit[8]uril (CB[8]) has been studied by optical spectroscopic methods for the molar ratios n = c _CB[8]/c ₁ in the range of 0 ≤ n ≤ 6. It has been found that the inclusion complexes (1)₂@CB[8] dominate in the solution at n ≤ 0.5, whereas the complexes 1@CB[8] dominate at n ≥ 1. The stability constants have been determined for the 1: 1 (log K ₁ = 6.2 (L mol^?1)) and 2: 1 (log β = 11.9 (L² mol^?2)) complexes. The fluorescence decay kinetics of dye 1 in the presence of CB[8] is two-exponential, with the average lifetime increasing substantially at n ≥ 1. It has been shown that the system can operate in the cyclic mode as an assembler (or supramolecular catalyst) in the photodimerization reaction of dye 1 to form cyclobutane derivative 2. The stability constant of the complex 2@CB[8] (log K ₃ = 5.9 (L mol^?1)) and the quantum yield of cycloaddition (? ≈ 0.07 at n ≈ 0.5) have been determined.     

Crown-containing styryl dyes

Styryl dyes containing a crown ether group and a heteroaromatic moiety with a sulfoalkylN-substituent (1a,b) undergo photocyclodimerization in acetonitrile in the presence of Mg(ClO₄)₂ to give only the typeA isomer of cyclobutane derivative (2a,b). The photochemical regio- and stereoselectivity of the cycloaddition is explained by self-organization of thetrans-isomers of the styryl dyes upon complexation with the Mg²⁺ cations into dimers with a fixed mutual arrangement of multiple bonds.For part 7, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1449–1452, August, 1993.     

Crown ether styryl dyes

Novel styryl dyes (trans-2a,b) containing a 15-crown-5 ether moiety and anN-sulfobenzyl spacer were synthesized. The reactions oftrans-2a,b with Mg(ClO₄)₂ in MeCN afford dimeric complexes. During photolysis of the lattertrans-cis isomerization to give anion-“capped” complexes (cis-2a,b)·Mg²⁺ and stereospecific [2+2] autocycloaddition to yield cyclobutane derivative occur in parallel The ratio of the two transformation pathways of dyes2a,b depends on the spacer type. To interpret the experimental data, the molecular-mechanics and semiempirical quantum-chemical calculations were performed.     

Crown ether styryl dyes

New crown ether-containing styryl dyes of the benzothiazole series containing an aza-15-crown-5-ether moiety were synthesized. Thetrans-cis-photoisomerization of these dyes and their analogs was studied; the effect of metal cations on the kinetics of darkcis-trans-isomerization was elucidated. The stability constants of the complexes of thecis-isomers of these dyes with Ca(ClO₄)₂ were estimated. The dramatic increase (by more than three orders of magnitude) in the stability of the complexes on passing from a cationic dye to a betaine was attributed to the formation of an intramolecular bond in thecis-complexes between the sulfo group of theN-substituent and the metal cation located in the cavity of the azacrown-ether moiety.     

Formation of a Syndiotactic Organic Polymer Inside a MOF by a [2+2] Photo‐Polymerization Reaction

Getting suitable crystals for single‐crystal X‐ray crystallographic analysis still remains an art. Obtaining single crystals of metal–organic frameworks (MOFs) containing organic polymers poses even greater challenges. Here we demonstrate the formation of a syndiotactic organic polymer ligand inside a MOF by quantitative [2+2] photopolymerization reaction in a single‐crystal‐to‐single‐crystal manner. The spacer ligands with trans,trans,trans‐conformation in the pillared‐layer MOF with guest water molecules in the channels, undergo pedal motion to trans,cis,trans‐conformation prior to [2+2] photo‐cycloaddition reaction and yield single crystals of MOF containing two‐dimensional coordination polymers fused with the organic polymer ligands. We also show that the organic polymer in the single crystals can be depolymerized reversibly by cleaving the cyclobutane rings upon heating. These MOFs also show interesting photoluminescent properties and sensing of small organic molecules.     

Novel photoswitchable receptors: synthesis and cation-induced self-assembly into dimeric complexes leading to stereospecific [2+2]-photocycloaddition of styryl dyes containing a 15-crown-5 ether unit

Styryl dyes 4a-e containing a 15-crown-5 ether unit and a quinoline residue with a sulfonatoalkyl or sulfonatobenzyl N-substituent were synthesized. The relationship between the photochemical behavior of these dyes and their aggregates derived from complexation with Mg(2+) in MeCN was studied using (1)H NMR and absorption spectroscopy. The E-isomers of 4a-e were shown to form highly stable dimeric (2:2) complexes with Mg(2+). Upon irradiation with visible light, the dimeric complexes undergo two competing photoreactions, viz., geometric E --> Z isomerization, resulting in an anion-capped 1:1 complex of the Z-isomer with Mg(2+) and stereospecific syn-head-to-tail [2+2]-cycloaddition, affording a single isomer of bis-crown-containing cyclobutane. The N-substituent in the dye has a dramatic effect on the photochemical behavior of the dimeric complex. Molecular dynamics and semiempirical quantum-chemical calculations were carried out to interpret the observed photocycloaddition in the dimer. Conformational equilibria for the dimer of (E)-4b were analyzed using (1)H NMR spectroscopy.     

Solid-state photochemical [2+2] cycloaddition in a hydrogen-bonded metal complex containing several parallel and crisscross C=C bonds

One-dimensional hydrogen-bonded complex [Zn(bpe)(2)(H(2)O)(4)](NO(3))(2).8/3 H(2)O.2/3 bpe (1, bpe=4,4'-bipyridylethylene) containing coordination complex cations [Zn(bpe)(2)(H(2)O)(4)](2+) with parallel and crisscross double bonds undergoes photochemical [2+2] cycloaddition in the solid state and produces tetrakis(4-pyridyl)cyclobutane (tpcb) in up to 100 % yield with rctt-tpcb (2a) as major and rtct-tpcb (2b) as minor product. The bpe ligands with crisscross conformation of C=C bonds appear to undergo pedal-like motion prior to photodimerization. Grinding single crystals to powder accelerates the pedal motion of crisscrossed olefins in the bpe ligands to parallel alignment and provides the rctt-cyclobutane stereoisomer 2a quantitatively. In addition, 100 % photodimerization of ground 1 indicates that the free bpe ligands, which are remote from each other in a pool of water, and NO(3)(-) ions moved toward each other to give a mixture of rctt- and rtct-tpcb isomers.     

Crystal-chemical functions of [Hg2]2+ and [Hg3]4+ groups in inorganic structures

About 20 structures of natural and synthetic inorganic compounds containing a [H_g2] (dumbbell) pair (Hg-Hg = 2.47?2.56 å) or a [H_g3] triangle (Hg-Hg_av = 2.7 å) are analyzed. From crystal-chemical viewpoint, it is reasonable to consider these groups as a single cation with coordinates of its geometrical center. In all cases, the coordination polvhedra are convex polxhedra with 8–14 vertices and with distances from the center to the vertex of 3.00?3.91 å, which makes the [H_g2]²⁺ and [Hg3]⁴⁺ cations analogs of Cs. Examples are given to demonstrate the advantages of the suggested analysis of structures with a [Hg_n] group. This approach extends classical crystal chemistry to compounds with nonuniform chemical bonds, in particular, to compounds with pseudocluster and cluster groups inserted in the ionic structure; therefore, it is especially useful for comparison and classification purposes and for analysis of structure-foming factors.     

The 1:1 host-guest complexation between cucurbit[7]uril and styryl dye

The photophysical properties of aqueous solution of styryl dye, 4-[(E)-2-(3,4-dimethoxyphenyl)ethenyl]-1-ethylpyridinium perchlorate (dye 1), in the presence of cucurbit[7]uril (CB[7]) was studied by means of fluorescence spectroscopy methods. The production of 1:1 host-guest complexes in the range of CB[7] concentrations up to 16 μM with K = 1.0 × 10(6) M(-1) has been observed, which corresponds to appearance of the isosbestic point at 396 nm in the absorption spectra and a 5-fold increase in fluorescence intensity. The decay of fluorescence was found to fit to double-exponential functions in all cases; the calculated average fluorescence lifetime increases from 145 to 352 ps upon the addition of CB[7]. Rotational relaxation times of dye 1 solutions 119 ± 14 ps without CB[7] and 277 ± 35 ps in the presence of CB[7] have been determined by anisotropy fluorescence method. The comparison of the results of quantum-chemical calculations and experimental data confirms that in the host cavity dye 1 rotates as a whole with CB[7].     

Photonics of 18-crown-6-containing styryl dye and its complexes with metal cations

Using absorption, luminescence, ¹H NMR, and laser kinetic spectroscopies, the photophysical processes and photochemical reactions of 4-[(E)-2-(2,3,5,6,8,9,11,12,14,15-decahydro-1,4,7,10,13,16-benzohexaoxacyclooctadecin-18-yl)vinyl]-1-ethylpyridinium perchlorate and its complexes with lithium, sodium, potassium, calcium, barium, silver, and lead perchlorates in MeCN have been studied. The styryl dye and its complexes with metal cations are capable of emitting normal (prompt) and delayed fluorescence and enter into the trans–cis photoisomerization reaction. The dye molecules in the triplet state participate in the processes of degradation of electronic excitation energy. Triplet–triplet absorption is observed only in the presence of lead cations with a maximum at 470 nm and the deactivation rate constant of the triplet state k = 2.5 × 10⁴ s^–1 in a deoxygenated solution.     

CsPdCl3 – eine Verbindung mit [Pd2Cl6]-Baugruppen und anorganischem Kation

CsPdCl₃ – A Compound with Isolated [Pd₂Cl₆] Groups and an Inorganic Cation The crystal structure of CsPdCl₃ has been characterized by X-ray powder diffraction methods. Meanwhile it was possible to isolate single crystals and to confirm the structure by single crystal X-ray investigations. CsPdCl₃ crystallizes orthorhombic in space group Ibam (No. 72) with a = 13.724(1), b = 10.579(1), c = 8.499(1) Å, and Z = 8. CsPdCl₃ is a compound with a dinuclear [Pd₂Cl₆]^2– group and a cesium cation. Formerly such groups are only found in combination with large “organic” cations so far.     

Tuning delocalization in the radical cations of 1,4-bis[4-(diarylamino)styryl]benzenes, 2,5-bis[4-(diarylamino)styryl]thiophenes, and 2,5-bis[4-(diarylamino)styryl]pyrroles through substituent effects

Radical cations have been generated for 10 bis[4-(diarylamino)styryl]arenes and heteroarenes to investigate the effect of the electron-richness of the terminal groups and of the bridging (hetero)arene on delocalization. The intervalence charge-transfer bands of these radical cations vary from weak broad Gaussians, indicative of localized class-II mixed-valence species, to strong relatively narrow asymmetric bands, characteristic of delocalized class-III bis(diarylamino) species, to narrow symmetric bands in cases where the bridge contribution to the singly occupied molecular orbital is largest. Hush analysis of these bands yields estimates of the electronic coupling varying from 480 cm(-1) (electron-poor bridge, most electron-rich terminal aryl groups) to 1000 cm(-1) (electron-rich bridge, least electron-rich termini) if the diabatic electron-transfer distance, R(ab), is equated to the N-N separation. Computational and electron spin resonance (ESR) evidence for displacement of the diabatic states into the bridge (reduced R(ab)) suggests that these values are underestimates and that even more variation is to be expected through the series. Several dications have also been studied. The vis-NIR absorption of the dication of (E,E)-1,4-bis{4-[bis(4-n-butoxyphenyl)amino]styryl}-2,5-dicyanobenzene is seen at an energy similar to that of the strongest band in the spectrum of the corresponding weakly coupled monocation, with approximately twice the absorptivity, and its ESR spectrum suggests essentially noninteracting radical centers. In contrast, the electronic spectra of class-III monocations show no clear relationship to those of the corresponding dications, which ESR reveals to be singlet species.     

Chemical Patterning in Single Crystals of Metal–Organic Frameworks by [2+2] Cycloaddition Reaction

Conventional chemical patterning involves films of polymeric materials. Herein, we demonstrate that the presence or absence of guest solvents in the crystal voids modulates the patterning of the cyclobutane rings in highly strained metal–organic frameworks (MOFs) under UV light. The olefin pairs of the spacer ligands, which resemble a ladder‐like structure, in the MOF, undergo a [2+2] cycloaddition reaction in a single‐crystal‐to‐single‐crystal manner. For instance, a partial photoreaction in the MOFs in the absence of a guest solvent as well as with dimethylacetamide in the voids generated two different patterns of the cyclobutane rings. Surprisingly, the MOF with the lattice dimethylformamide undergoes 100 % photoreaction, but the photoproduct contains broken chains. Such chemical patterning at the molecular level represents a next step in crystal engineering.     

Assembly of 3D Coordination Polymers from 2D Sheets by [2+2] Cycloaddition Reaction

The synthesis of three 2D interdigitated Zn^II coordination polymers (CPs), by using three monotopic ligands containing C?C bonds, is reported. Among these, two CPs with 4spy (4‐styryl pyridine) and 2F‐4spy (a 2′‐fluoro derivative of 4spy) ligands showed quantitative formation of cyclobutane rings, thus demonstrating a unique synthetic procedure to synthesize metal–organic frameworks (MOFs) by using this photochemical reaction. Interestingly, these compounds can also be synthesized by mechanochemical grinding procedures by using Zn(OAc)₂. In contrast, Zn(NO₃)₂ did not yield the required product, unlike in the solution route. In addition, compounds with 4vpy (4‐vinylpyridine), 4spy and 2F‐4spy ligands created different units in the CPs; 4vpy and 2F‐4spy furnished paddle wheel units, whereas 4spy yielded tetrahedral Zn^II repeating units. Furthermore, the change in coordination geometry manifests in the photoluminescence properties, attributed to the difference in charge‐transfer and ligand‐centered fluorescent phenomenon.     

Crown-containing styryl dyes

Novel crown ether styryl dyes containing heterocyclic residues with various substituents were synthesized. The fluorescence and absorption spectra of thetrans-isomers of crown ether styryl dyes and their complexes with metal cations were studied. Based on spectral data, the influence of the nature of a heterocyclic residue, the crown ether fragment, and the temperature on the fluorescence of dyes and their complexes with metal cations was elucidated.For Communication 13, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2003–2008, October, 1995.This study was financially supported by the Russian Foundation for Basic Research (Project Nos. 93-03-04089 and 93-03-18141) and the International Science Foundation (Grant M8Q 000).