Facile and Simultaneous Stripping Determination of Zinc,Cadmium and Lead on Disposable Multiwalled Carbon Nanotubes Modified Screen‐Printed Electrode

Screen‐printed electrodes (SPEs) are cheap and disposable. But their application for heavy metal detection is limited due to the low sensitivity and poor selectivity. Here we report the ultrasensitive and simultaneous determination of Zn²⁺, Cd²⁺ and Pb²⁺ on a multiwalled carbon nanotubes and Nafion composite modified SPE with in situ plated bismuth film (MWCNTs/NA/Bi/SPE). The linear curves range from 0.5–100 µg L^?1 for Zn²⁺ and 0.5–80 µg L^?1 for Cd²⁺. Uniquely, the linear curve for Pb²⁺ ranges from 0.05–100 µg L^?1 with a detection limit of 0.01 µg L^?1. The practical application was verified in real samples with satisfactory results.     

ABTS‐Multiwalled Carbon Nanotubes Nanocomposite/Bi Film Electrode for Sensitive Determination of Cd and Pb by Differential Pulse Stripping Voltammetry

A 2,2′‐azinobis (3‐ethylbenzothiazoline‐6‐sulfonate) diammonium salt (ABTS)‐multiwalled carbon nanotubes (MWCNTs) nanocomposite/Bi film modified glassy carbon (GC) electrode was constructed for the differential pulse stripping voltammetric determination of trace Pb²⁺ and Cd²⁺. This electrode was more sensitive than ABTS‐free Bi/GC and Bi/MWCNTs/GC electrodes. Linear responses were obtained in the range from 0.5 to 35 μg L^?1 for Cd²⁺ and 0.2 to 50 μg L^?1 Pb(II), with detection limits of 0.2 μg L^?1 for Cd²⁺ and 0.1 μg L^?1 for Pb²⁺, respectively. This sensor was applied to the simultaneous detection of Cd²⁺ and Pb²⁺ in water samples with satisfactory recovery.     

A voltammetric sensor for simultaneous determination of lead,cadmium and zinc on an activated carbon fiber rod

A simple, low cost and sensitive voltammetric sensor was developed for the simultaneous detection of Pb²⁺, Cd²⁺, and Zn²⁺ based on a disposable carbon fiber rod (CFR). The important factors to enhance the sensing property were creation of a clean surface by dealing with CFR at a high potential and electrochemical deposition of Bi film to improve the accumulation of heavy metal ions.     

Study on Cd2+ Determination Using Bud-like Poly-L-Tyrosine/Bi Composite Film Modified Glassy Carbon Electrode Combined with Eliminating of Cu2+ Interference by Electrodeposition

A bud-like poly-L-tyrosine/Bi modified glassy carbon electrode (p-Tyr/Bi/GC) was prepared by CV and in situ Bi plating, whose conductivity and membrane morphology were characterized by CV, EIS and SEM, respectively. The p-Tyr membrane can effectively promote the enrichment of Cd²⁺. The optimal Tyr concentration and scanning number for p-Tyr/GC preparation were 2.0 mmol ⋅ L⁻¹ and 35, while the optimal Bi³⁺ concentration, pH and Cd²⁺ accumulation potential in test medium were 3.0 μmol ⋅ L⁻¹, 6.5 and −1.3 V, respectively. The linear equation of p-Tyr/Bi/GC's response to Cd²⁺ (1.0 nmol ⋅ L⁻¹ to 2.0 μmol ⋅ L⁻¹) was i_p (μA) = −0.6809 + 100.2c (μmol ⋅ L⁻¹) (R² = 0.9985) with a detection limit of 0.11 nmol ⋅ L⁻¹ (3S/N). The elimination of interference caused by Cu²⁺ in sample was studied by electrodeposition. The p-Tyr/Bi/GC electrode was successfully used for detecting Cd in rice samples with good reliability and accuracy. The developed Cd²⁺ sensor exhibits high sensitivity, wide linear range and low detection limit, especially the designed method of eliminating Cu²⁺ interference has the characteristics of high selectivity, simple operation and wide application range.     

Electrochemical sensor for Cd2+ and Pb2+ detection based on nano-porous pseudo carbon paste electrode

An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode (nano-PPCPE) has been successfully developed, and used to detect Cd²⁺ and Pb²⁺. The experimental results showed that the electrochemical performance of nanoPPCPE is evidently better than both glassy carbon electrode (GCE) and pure carbon paste electrode (CPE). Then the prepared nano-PPCPE was applied to detect Cd²⁺ and Pb²⁺ in standard solution, the results showed that the electrodes can quantitatively detect trace Cd²⁺ and Pb²⁺, which has great significance in electrochemical analysis and detection. The linear ranges between the target ions concentration and the DPASV current were from 0.1–3.0 μmol/L, 0.05–4.0 μmol/L for Cd²⁺ and Pb²⁺, respectively. And the detection limits were 0.0780 μmol/L and 0.0292 μmol/L, respectively. Moreover, the preparation of the nano-PPCPE is cheap, simple and has important practical value.     

Eco‐friendly Sensors Developed by Herbal Based Silver Nanoparticles for Electrochemical Detection of Mercury (II) Ion

In our study, the single‐use & eco‐friendly electrochemical sensor platform based on herbal silver nanoparticles (AgNPs) was developed for detection of mercury (II) ion (Hg²⁺). For this purpose, the surface of pencil graphite electrode (PGE) was modified with AgNPs and folic acid (FA), respectively. The concentrations of AgNPs and FA were firstly optimized by differential pulse voltammetry (DPV) to obtain an effective surface modification of PGE. Each step at the surface modification process was characterized by using cyclic voltammetry (CV) and electrochemical impedence spectroscopy (EIS). The limit of detection (LOD) for Hg²⁺ was estimated and found to be 8.43 μM by CV technique. The sensor presented an excellent selectivity for Hg²⁺ against to other heavy metal ions such as Ca²⁺, Cd²⁺, Cr³⁺, Cu²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Co²⁺ and Mn²⁺. Moreover, a rapid, selective and sensitive detection of Hg²⁺ was successfully performed in the samples of tap water within 1 min.     

Open-chain polyazaalkanes functionalised with pyrene groups as sensing fluorogenic receptors for metal ions

The new open-chain polyazaalkanes ligands L¹, L², L³ and L⁴ functionalised with one or two pyrene groups were synthesised and characterised and their potential use as selective cation and anion sensing chemosensors studied. Solution studies by potentiometric methods were carried out in the presence of the metal cations Cu²⁺ and Zn²⁺ in acetonitrile–water (70:30 v/v, 0.1 mol dm⁻³ tetrabutylammonium perchlorate, 25 °C) The results are compared with those reported for the analogous non-functionalised ligand triethylentetraamine (tta). The fluorescence behaviour of the ligands L¹–L⁴ has been studied as a function of the pH in the presence of the metal cations Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ in acetonitrile–water 70:30 v/v mixtures. The Zn²⁺ and Cd²⁺ cations enhance the fluorescence emission of the L¹–L⁴ chemosensors at basic pH, whereas Cu²⁺ induce quenching of the fluorescence emission at acid pH. The fluorescence behaviour of L¹–L⁴ receptors was also studied as a function of the pH in acetonitrile–water 70:30 v/v in the presence of anions.     

Simultaneous Voltammetric Determination of Cd2+ and Pb2+ in Gasoline Samples Employing a Chemically Modified Acrylonitrile-Butadiene-Styrene (ABS) Composite Electrode

A composite electrode based on acrylonitrile-butadiene-styrene and graphite chemically modified with a bismuth film (AGCE-BiF) was applied for the simultaneous determination of Cd²⁺ and Pb²⁺ in gasoline samples. Extraction induced by microemulsion breaking (EIMB) was used for the first time in the preparation of the samples for electroanalysis. AGCE-BiF was characterized by SEM, AFM, CV, and SWASV. The sensor showed an increase in sensitivity via in situ modification with bismuth film. The LOD was 4 μg L⁻¹ for Cd²⁺ and 2 μg L⁻¹ for Pb²⁺. The results showed satisfactory recoveries and precision, being statistically compatible to those obtained with FAAS.     

Development of a Sensor Based on Poly(1,2-diaminoanthraquinone) for Individual and Simultaneous Determination of Mercury (II) and Bismuth (III)

Contamination of natural water by mercury (Hg²⁺) and bismuth (Bi³⁺) metal ions have been extensively studied due to their toxic effects. A validated square-wave anodic stripping voltammetry (SW-ASV) method for determining Bi³⁺ and Hg²⁺ ions individually and simultaneously is described. A new electrochemical sensor was constructed using a gold (Au) electrode that has been modified with poly(1,2-diaminoanthraquinone) (p-1,2-DAAQ). Scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy were used to characterize the p-1,2-DAAQ/Au modified electrode. Factors such as the polymer film thickness, electrolyte, square wave parameters and preconcentration conditions were optimized to improve the performance of the modified Au electrode. Good linear responses were achieved in the concentration ranges of 1–200 μg L⁻¹ and 1–50 μg L⁻¹ forBi³⁺ and Hg²⁺, respectively, and the limits of detection were 0.27 μg L⁻¹ (Bi³⁺) and 0.29 μg L⁻¹ (Hg²⁺). The interference study results illustrated the high selectivity of the modified electrode for detection of Bi³⁺ and Hg²⁺. The proposed SW-ASV method was successfully applied for Bi³⁺ and Hg²⁺analyses in different real water samples.     

The Fabrication and Characterization of a Bismuth Nanoparticle Modified Boron Doped Diamond Electrode and Its Application to the Simultaneous Determination of Cadmium(II) And Lead(II)

We report the simultaneous electroanalytical determination of Pb²⁺ and Cd²⁺ by square‐wave anodic stripping voltammetry (SWASV) using a bismuth nanoparticle modified boron doped diamond (Bi‐BDD) electrode. Bi deposition was performed in situ with the analytes, from a solution of 0.1 mM Bi(NO₃)₃ in 0.1 M HClO₄ (pH 1.2), and gave detection limits of 1.9 μg L^?1 and 2.3 μg L^?1 for Pb(II) and Cd(II) respectively. Pb²⁺ and Cd²⁺ could not be detected simultaneously at a bare BDD electrode, whilst on a bulk Bi macro electrode (BiBE) the limits of detection for the simultaneous determination of Pb²⁺ and Cd²⁺ were ca. ten times higher.     

Electrodes with extremely high hydrogen overvoltages as substrate electrodes for stripping analysis based on bismuth-coated electrodes

Hydrogen evolution bothers stripping analysis significantly. Dioctyl phthalate-based carbon paste electrode exhibits extremely wide cathodic potential window. It is explored as a powerful substrate electrode to solve the problem of hydrogen evolution and further improve reproducibility for stripping analysis using bismuth-coated electrodes for the first time. It was successfully applied to the simultaneous determination of Zn²⁺, Cd²⁺, and Pb²⁺. Linear responses are obtained for Zn²⁺ in the range of 10–100 μg L⁻¹ and for Pb²⁺ and Cd²⁺ in the range of 5–100 μg L⁻¹. The detection limits for Zn²⁺, Cd²⁺, and Pb²⁺ are 0.1 μg L⁻¹, 0.22 μg L⁻¹ and 0.44 μg L⁻¹, respectively. The method has been successfully applied to the determination of Zn²⁺, Cd²⁺, and Pb²⁺ in waste water samples. The detection strategy based on the combination of dioctyl phthalate-based carbon paste electrode and bismuth-coated electrodes holds great promise for stripping analysis.     

Electrochemical Sensing of Mercury over Cadmium and Lead Cations by the Redox-Active Polyazacycloalkane Ligand 1,1″: 1′,1′′′-Bis[ethane-1,2-diylbis(iminomethylene)]bis[ferrocene]

The coordination behaviour of the redox-active polyazacycloalkane L¹ against the toxic heavy-metal ions Cd²⁺, Pb²⁺, and Hg²⁺ was studied in THF/H₂O 70 : 30 (containing 0.1 mol⋅dm⁻³ of (Bu₄N)ClO₄). The crystal and molecular structure of the cadmium complex [Cd(L¹)(NO₃)₂] ( 1 ) was determined by X-ray single-crystal analysis. The cadmium ion is in a 4+2 surrounding with the ligand L¹ acting as tetradentate and the apical positions occupied by the O-atoms of the nitrate anions. An electrochemical study reveals that L¹ shows a selective electrochemical response against Hg²⁺ over Cd²⁺ and Pb²⁺.     

Sensitive Stripping Determination of Cadmium(II) and Lead(II) on Disposable Graphene Modified Screen‐Printed Electrode

In the present work, a sensitive, facile and disposable sensing platform for trace analysis of heavy metal ions was developed at the Bi modified graphene‐poly(sodium 4‐styrenesulfonate) composite film screen printed electrode (GR/PSS/Bi/SPE). The GR/PSS/Bi/SPE improved sensitivity and linearity due to the functionalization of graphene with negatively charged PSS providing more absorbing sites. The detection limit of the GR/PSS/Bi/SPE is found to be 0.042 µg L^?1 for Cd²⁺ and 0.089 µg L^?1 for Pb²⁺ with linear responses of Cd²⁺ and Pb²⁺ in the range of 0.5–120 µg L^?1. Finally, the practical application was confirmed in real water with satisfactory results.     

Silver nanoparticle loaded on activated carbon and activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP) as new sorbents for trace metal ions enrichment

The efficiencies and performances of silver nanoparticle loaded activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP-Ag-NP-AC) and activated carbon modified with IPBATP (IPBATP-AC), as new sorbents, were evaluated for separation and preconcentration of Cu²⁺, Zn²⁺, Co²⁺, Cd²⁺ and Pb²⁺ ions from real environmental samples. The retained metals content was reversibly eluted using 5?mL of CH₃COOH (6.0?mol?L^?1) and/or 10?mL of 4.0?mol?L^?1 HNO₃ for IPBATP-Ag-NP-AC and IPBATP-AC, respectively. The experimental parameters influence the recoveries of metal ions including pH, amounts of ligand and supports, condition of eluents, sample and eluent flow rates of has been investigated. The preconcentration factors were found to be 100 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 50 for Pb²⁺ ions using IPBATP-Ag-NP-AC, and 50 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 25 for Pb²⁺ ions using IPBATP-AC. The detection limit of both SPE-based sorbents was between 1.6–2.5?ng?mL^?1 for IPBATP-AC and 1.3–2.5?ng?mL^?1 for IPBATP-Ag-NP-AC. The proposed methods have been successfully applied for the extraction and determination of the understudy metal ions content in some real samples with extraction efficiencies higher than 90% and relative standard deviations (RSD) lower than 2.4%.     

Remarkable bismuth-gold alloy decorated on MWCNT for glucose electrooxidation: the effect of bismuth promotion and optimization via response surface methodology

In this study, the carbon nanotube supported gold, bismuth, and gold-bismuth(Au/MWCNT, Bi/MWCNT, and Au-Bi/MWCNT) nanocatalysts were prepared with NaBH₄ reduction method at varying molar atomic ratio for glucose electrooxidation (GAEO). The synthesized nanocatalysts at different Au: Bi atomic ratios are characterized via x - ray diffraction (XRD), transmission electron microscopy (TEM), and N₂ adsorption-desorption. For the performance of AuBi/MWCNT for GAEO, electrochemical measurements are performed by using different electrochemical techniques namely cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). Monometallic Au/MWCNT exhibits higher activity than Bi/MWCNT with 256.57 mA/mg (0.936 mA/cm²) current density. According to CV results, Au₈₀Bi₂₀/MWCNT nanocatalyst has the highest GAEO activity with the mass activity of 320.15 mA/mg (1.133 mA/cm²). For Au₈₀Bi₂₀/MWCNT, central composite design (CCD) is utilized for optimum conditions of the electrode preparation. Au₈₀Bi₂₀/MWCNT nanocatalysts are promising anode nanocatalysts for direct glucose fuel cells (DGFCs).     

Electrochemical Quantification of Lead Adsorption on TiO2 Nanoparticles

This work describes a rapid easy-to-use electrochemical method for quantifying lead (Pb²⁺) adsorption on metal oxide nanoparticles (NPs), demonstrated here for titanium dioxide (TiO₂). The method was able to quantify Pb²⁺ adsorption for concentrations as low as 0.95 μM, and up to 200 μM in NP dispersions, and to differentiate ion uptake in the presence and absence of a natural organic material, humic acid (HA). The method was selective for Pb²⁺ against Cu²⁺, As³⁺, Zn²⁺, Cd²⁺ and Cr³⁺ ions when measured in the specific potential range from −0.4 to −0.6 V and was successfully demonstrated in water and home-collected dust.     

A functional applied material on recognition of metal ion zinc based on the double azine compound

A colorimetric and fluorescent probe L has been designed and synthesized, which bearing the double azine moiety and showing a detection limit of 2.725 × 10^?7 M towards Zn²⁺. Based on the basic recognition mechanism of ESIPT and CHEF effect, the L has high selectivity and sensitivity to only Zn²⁺ (not Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Cr³⁺, and Mg²⁺) within the physiological pH range (pH = 7.0–8.4) and showed a fluorescence switch. Moreover, this detection progress occured in the DMSO/H₂O ～ HEPES buffer (80/20, v/v; pH 7.23) solution which can conveniently used on test strip.     

Über die Extrahierbarkeit von Metallverbindungen der Diphenylarsinsäure

Zusammenfassung Es wird über die Möglichkeit berichtet, Metallionen aus wäßriger Lösung mit Hilfe organischer Lösungsmittel als Verbindungen der Diphenylarsinsäure extrahieren zu können. Von den untersuchten Ionen Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ und Mg²⁺ sind mit Chloroform nur Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ und Al³⁺ extrahierbar. Mit Trichloräthylen ist praktisch nur mehr Pb²⁺ extrahierbar, während Benzol und Essigester keinerlei Extraktionswirkung zeigen. Vergleiche mit dem Verhalten aliphatischer Arsinsäuren werden angestellt.

---

Summary A report is given concerning the possibility of extracting metal ions from aqueous solution by means of organic liquids as compounds of diphenylarsinic acid. The ions investigated included Fe³⁺, Al³⁺, Bi³⁺, UO₂ ²⁺, Zn²⁺, Cr³⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺, and Mg²⁺. Of these only Pb²⁺, Bi³⁺, Be²⁺, Zn³⁺ and Al³⁺ are extractable with chloroform. With trichloro ethylene only Pb²⁺ is extractable, whereas benzene and acetic ester show no extraction action. Comparisons were made with the behavior of aliphatic arsinic acids.

---

Résumé On décrit la possibilité d'extraction d'ions métalliques à l'état de composés de l'acide diphénylarsinique, à partir de leur solution aqueuse, à l'aide d'un solvant organique. Parmi les ions étudiés, Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ et Mg²⁺, seuls Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ et Al³⁺ peuvent être extraits par le chloroforme. Le trichloréthyléne ne permet que l'extraction du Pb²⁺, cependant que le benzène et l'ester acétique ne manifestent aucune activité d'extraction. On établit une comparaison avec le comportement des acides arsiniques aliphatiques.

     

Determination of Trace Lead and Cadmium in Water Samples by Anodic Stripping Voltammetry with a Nafion‐Ionic Liquid‐Coated Bismuth Film Electrode

A new chemically modified bismuth film electrode coated with an ionic liquid [(1‐ethyl‐3‐methylimidazolium tetracyanoborate (EMIM TCB)] and Nafion was developed for the simultaneous determination Pb²⁺ and Cd²⁺ by anodic stripping voltammetry. Compared with conventional bismuth film electrodes, this electrode exhibited greatly improved electrochemical activity for Pb²⁺ and Cd²⁺ detection due to the unique properties of Nafion polymer and ionic liquid. The key experimental parameters related to the fabrication of the electrode and the voltammetric measurements were optimized on the basis of the stripping signals, where the peak currents increased linearly with the metal concentrations in a range of 10–120 µg L^?1 with a detect limit of 0.2 µg L^?1 for Pb²⁺, and 0.5 µg L^?1 for Cd²⁺ for 120s deposition. High reproducibility was indicated from the relative standard deviations (1.9 and 2.5 %) for nine repetitive measurements of 20 µg L^?1 Pb²⁺ and Cd²⁺, respectively. In addition, the surface characteristics of the modified BiFE were investigated by scanning electron microscopy (SEM), and results showed that fibril‐like bismuth nanostructures were formed on the porous Nafion polymer matrix. Finally, the developed electrode was applied to determine Pb²⁺ and Cd²⁺ in water samples, indicating that this electrode was sensitive, reliable and effective for the simultaneous determination of Pb²⁺ and Cd²⁺.