碳纤维微电极负载金纳米粒子用于绿茶中儿茶素的检测

本文开发了基于纳米金修饰的碳纤维超微电极(CFME)用于儿茶素的定量检测。通过使用柠檬酸三钠还原氯金酸制得纳米金粒子(AuNPs),采用恒电位电沉积法将纳米金修饰在CFME表面。在pH 2.00的Tris-HCl缓冲溶液中,采用差分脉冲法和循环伏安法考察了修饰前后电极对儿茶素的电催化性能。结果表明,纳米金修饰电极对儿茶素具有明显的电催化效果。在优化实验条件下,纳米金修饰的碳纤维超微电极(AuNPs/CFME)与儿茶素浓度在1.00×10^-3~10.0μmol/L范围内呈良好的线性关系,且AuNPs/CFME的电化学性能非常稳定,具有良好的重现性。该方法操作简单,准确性高,可用于对儿茶素进行定量检测。     

递质氨基酸的毛细管电泳-安培检测

研究了毛细管电泳安培检测氨基酸的方法。氨基酸用萘 -2,3 -二羧醛 (NDA)衍生为电活性物质。碳纤维电极采用1.5V ,30s固定电压电化学预处理 ,检测结果令人满意。作者还对最佳衍生反应条件 ,电极预处理条件对氨基酸衍生物电化学行为的影响进行了研究。该法对谷氨酸、甘氨酸、丙氨酸、γ -氨基丁酸的检出限分别为2.5×10-7、2.5×10-7、5.0×10-8、2.5×10-7 mol/L。     

一种形状可控的高韧性碳纤维微电极的制备、表征及其在细胞分泌检测中的应用

本文报道利用微量移液枪头制备碳纤维微电极。扫描电镜结果表明：该法不仅可得到密封效果良好、截面光滑的微盘或微柱电极,而且电极的高韧性的特点能够保证其在使用过程中不易被折断。电极的伏安响应及单细胞测定实验进一步表明,该电极电化学性能优良,噪声低、响应快速、灵敏度高,能满足单细胞检测及其它微环境分析的要求。     

电化学预处理碳纤维电极用于毛细管电泳安培检测局部麻醉药

本文研究了电化学预处理碳纤维的各种条件,如处理电压、处理时间、处理后稳定时间、溶液条件等对局部麻醉药普鲁卡因、利多卡因电化学行为的影响.找出的电化学预处理最佳条件是在2.0V进行1.5min阳极化处理并在缓冲液中保持10min.普鲁卡因在pH=4~5之间,利多卡因在pH=6~7之间有较低的峰电位.运用最佳条件,普鲁卡因和利多卡因在毛细管电泳上5min内可获得很好的分离和检测.     

基于新型聚钙羧酸修饰电极的甲胎蛋白电化学免疫传感器研究

通过电聚合制得新型聚钙羧酸修饰电极并用于构建检测甲胎蛋白（AFP）的高灵敏电化学免疫传感器. 采用扫描电镜（SEM）、电化学交流阻抗（EIS）观察、表征修饰电极和AFP单克隆抗体（Ab1）固定前后的差异. 固定Ab1的电极与一定浓度的AFP、辣根过氧化物酶联AFP单克隆抗体（HRP-Ab2）反应,形成夹心型免疫复合物. 辣根过氧化物酶（HRP）催化3,3',5,5'-四甲基联苯胺（TMB）底物产生电流信号,实现AFP浓度的测定. 本检测方法灵敏度高,重现性好.     

碳纤维汞膜微电极1.5次微分伏安法测定米托蒽醌的研究

米托蒽醌（ＭＸＴ）能吸附在碳纤维汞膜微电极表面，阴极溶出时，产生一个灵敏的１．５次微分溶出峰，其峰电流和米托葱酿的浓度在１．０×１０－５ｍｏｌ／Ｌ～１．３×１０－９ｍｏｌ／Ｌ范围内具有良好的线性关系，经３ｍｉｎ的富集，检出限可达１．０×１０－１０ｍｏｌ／Ｌ，据此建立了测定ＭＸＴ的灵敏的新方法，本文讨论了实验条件，并对血样中的ＭＸＴ进行了测定。     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

Constant Potential Pretreatment of Carbon Fiber Electrodes for in Vivo Electrochemistry

Abstract

A constant potential procedure to pretreat carbon fiber electrodes is described. This essentially consists of two steps: +3.0 V for 30 s and -2.0 V for 10 s. The anodic potential treatment enhances sensitivity for catechols, and cathodic potential treatment improves selectivity, which results in a potential shift of AA from catechols. The optimum parameters and experimental conditions for electrochemical treatment were explored. Treated carbon fiber electrode used in rat brain showed well-defined and separated peaks of AA and catechols.     

纳米金修饰玻碳电极固载抗体电位型白喉类毒素免疫传感器的研究

将巯基乙胺 (AET)固载到玻碳电极 (GCE)表面 ,进而化学吸附纳米金 (NG) ,并通过半胱氨酸 (Cys)用戊二醛 (GA)作交联剂将白喉抗体 (anti Diph)固定在玻碳电极上 ,从而制得高灵敏电位型白喉类毒素 (Diph)免疫传感器 .通过循环伏安法考察了电极表面的电化学特性 ,并对该免疫传感器的性能进行了详细的研究 .该传感器对白喉类毒素检测的线性范围是 2 4～ 60 0ng·mL-1,斜率为 3 8.9mV/decade ,线性相关系数为 0 .9979,检出限为 5 .2ng·mL-1,并将其用于生物制品中白喉类毒素的检测 ,其结果令人满意     

Electrochemical Detection of Methimazole by Capillary Electrophoresis at a Carbon Fiber Microdisk Electrode

We developed a sensitive, simple and low cost method to determine methimazole based on capillary electrophoresis with electrochemical detection (CE‐EC) at a carbon fiber microdisk electrode (CFE). We investigated the effects of detection potential, the concentration and pH value of the phosphate buffer, and injection time as well as separation voltage on the detection of methimazole. Under the optimized conditions: the detection potential at 1.30 V, 10 mmol/L phosphate buffer (pH 7.0), injection time 30 s at a height of 20 centimeter and separation voltage at 15 kV, the linear range was obtained from 1.0×10^?7 to 2.0×10^?4 mol/L, covering 3 orders of magnitude with a correlation coefficient of 0.9995. The LOD (S/N=3) obtained was 5.0×10^?8 mol/L. The RSD of migration time and peak current for 2.0×10^?4 mol/L methimazole was 1.04% and 1.54% (n=10), respectively. The method was also used to analyze methimazole tablets and human urine sample.     

Voltammetric Studies on the Electrochemical Reduction of Methylmercury in HCl Aqueous Medium at a Carbon Microelectrode

Fast scan voltammetry applied to methylmercury in chloride medium at a carbon fiber microelectrode has shown two cathodic peaks located at ?0.45 and ?1.1 V and a single anodic peak at ?0.33 V (vs. Ag|AgCl). It was concluded that the reoxidation process, at high sweep rates, in acidic media behaves as a reversible one‐electron transfer process coupled to a chemical reaction, with the reaction product weakly adsorbed. Good linear calibration plots for the methylmercury determinations in the concentration range from 75 to 300 μM, have been obtained using the currents of the anodic peak measured on the CVs recorded, at 10 V s^?1, at a carbon fiber microelectrode, in a stationary solution of methylmercury chloride. Data have shown that the carbon microelectrode, cycled continuously in the analyte, can replace the dropping mercury electrode (DME), with the advantages that the carbon microelectrode is a promising tool for further studies in high resistive media, such as in natural waters.     

多巴胺在聚中性红修饰碳纤维微电极上的电化学行为

利用电聚合方法制备了聚中性红(PNR)修饰碳纤维微电极.根据循环伏安(CV)、电位阶跃实验结果,得出了多巴胺(DA)在PNR膜中的表观扩散系数D0=7.0×10-9cm2/s、膜表面表观标准电子转移速率常数κ=0.55 cm/s;该电极对DA响应灵敏,对抗坏血酸具有良好的抗干扰能力,可望用于活体中DA的测定.     

5-羟色胺在碳纤维微电极上的电化学测定及伏安行为研究

本文研究了5 羟色胺在Na2HPO4 KH2PO4(pH6.0)缓冲溶液中,于自制的碳纤维微电极上的伏安行为。在此缓冲溶液中5 羟色胺有一对氧化还原峰,峰电位分别为0.2V和0.4V。峰电流与5 羟色胺的浓度分别在4.0×10-6～4.0×10-5mol/L和5.0×10-6～5.0×10-5mol/L范围内呈良好的线性关系,检出限分别为4.70×10-6mol/L和1.76×10-6mol/L。同时利用多种电化学方法求出了动力学参数。     

斜削碳纤维束微电极伏安法测定体液环境中的神经递质

报道斜削碳纤维束微电极的制备，活化预处理，伏安特性及微分常规脉冲伏安法测定多巴胺，肾上腺素和去甲肾上腺素的适宜条件。此法的检测灵敏度高，重现性好，抗维Ｃ干扰能力强。     

耐尔兰A修饰碳纤维微柱电极的电化学性质研究

用循环伏安法将碳纤维柱电极表面官能团化，利用正负离子间的静电作用将耐尔兰Ａ修饰在碳纤维微柱电极（ＣＦＭＣＥ）表面，对该修饰电极的电化学性质进行研究，讨论了它的稳定性，测定了不同ＰＨ值下固定化耐尔兰Ａ电极反应的表现电子转移速率常数ｋ、电荷转移系数α以及参加电极反应的Ｈ＾＋数，实验表明：电极对血戏蛋白在ＣＦＭＣＥ上的还原有电催化作用。     

苯二酚异构体的电动毛细管色谱-玻碳微电极柱上安培检测分析方法研究

在玻碳纤维微电极上研究了电解液中β－环糊精（ＣＤ）的浓度对邻、间、对苯二酚的循环伏安特性的影响,从实验结果和分子结构水平方面考察了β－ＣＤ与邻、间、对苯二酚的包结作用。研究结果表明,β－ＣＤ与邻、间、对苯二酚的包结作用强弱顺序为间苯二酚、邻苯二酚、对苯二酚。讨论了电泳缓冲液中ΝΗ４Ｃｌ,ＳＤＳ,β－ＣＤ的浓度及ｐＨ值对邻、间、对苯二酚迁移时间的影响。建立了苯二酚异构体胶束电动毛细管色谱－玻碳微电极柱上安培检测分析方法,方法的回收率在９８％～１０３％之间。     

Glucose Microbiosensor Based on MnO2 and Glucose Oxidase Modified Carbon Fiber Microelectrode

A glucose microbiosensor has been developed using electrochemical codeposition of glucose oxidase (GOx) along with MnO₂ as mediator, onto a single carbon fiber microelectrode. A two‐step deposition of only MnO₂ initially and then of MnO₂ in the presence of GOx has been introduced to ensure appropriate activity of the mediator. Several parameters such as deposition potential and time, concentration levels etc. have been characterized and optimized. A thin Nafion film was applied as an immobilization/encapsulation and interference‐free protective layer. The proposed microbiosensor was employed as an amperometric glucose detector at pH 7.5 at an operating potential of +0.58 V (vs. Ag/AgCl). The microbiosensor is characterized by a well‐reproducible amperometric response, linear signal‐to‐glucose concentration range from 1.5 mmol L^?1 to 15 mmol L^?1, and a limit of detection (S/N=3) of 0.8 mmol L^?1. The microbiosensor exhibits good stability over more than ten hours of continuous measurement.     

再生碳纤维电极的新方法

本文根据火焰熔融法自制碳纤维电极的特点，提出了一种简便、易行的火焰灼烧再生电极的新方法。由此法再生电极的各种性能与原电极相当，结果令人满意。