Solution Synthesis of Porous Silicon Particles as an Anode Material for Lithium Ion Batteries

Nanostructured silicon-based materials with porous structures have recently been found to be impressive anode materials with high capacity and cycling performance for lithium-ion batteries. However, the current methods of preparing porous silicon have generally been confronted with the requirement for multiple steps and complex synthesis. In the present study, porous silicon with high surface area was prepared by using a high yielding and simple reaction in which commercial magnesium powder readily reacts with HSiCl₃ with the help of an amine catalyst under mild conditions. The obtained porous silicon was coated with a nitrogen-doped carbon layer and used as the anode for lithium-ion batteries. The porous Si-carbon nanocomposites exhibited excellent cycling performance with a retained discharge capacity of 1300 mA h g⁻¹ after 200 cycles at 1 A g⁻¹ and a discharge capacity of 750 mA h g⁻¹ at a current density of 2 A g⁻¹ after 250 cycles. Remarkably, the Coulombic efficiency was maintained at nearly 100 % throughout the measurements.     

Dual Dopamine Derived Polydopamine Coated N-Doped Porous Carbon Spheres as a Sulfur Host for High-Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are considered to be one of the most promising energy storage systems owing to their high energy density and low cost. However, their wide application is still limited by the rapid capacity fading. Herein, polydopamine (PDA)-coated N-doped hierarchical porous carbon spheres (NPC@PDA) are reported as sulfur hosts for high-performance Li-S batteries. The NPC core with abundant and interconnected pores provides fast electron/ion transport pathways and strong trapping ability towards lithium polysulfide intermediates. The PDA shell could further suppress the loss of lithium polysulfide intermediates through polar–polar interactions. Benefiting from the dual function design, the NPC/S@PDA composite cathode exhibits an initial capacity of 1331 mAh g⁻¹ and remains at 720 mAh g⁻¹ after 200 cycles at 0.5 C. At the pouch cell level with a high sulfur mass loading, the NPC/S@PDA composite cathode still exhibits a high capacity of 1062 mAh g⁻¹ at a current density of 0.4 mA cm⁻².     

In‐Situ Fabrication of Bone‐Like CoSe2 Nano‐Thorn Loaded on Porous Carbon Cloth as a Flexible Electrode for Na‐Ion Storage

Sodium‐ion batteries (SIBs) based on flexible electrode materials are being investigated recently for improving sluggish kinetics and developing energy density. Transition metal selenides present excellent conductivity and high capacity; nevertheless, their low conductivity and serious volume expansion raise challenging issues of inferior lifespan and capacity fading. Herein, an in‐situ construction method through carbonization and selenide synergistic effect is skillfully designed to synthesize a flexible electrode of bone‐like CoSe₂ nano‐thorn coated on porous carbon cloth. The designed flexible CoSe₂ electrode with stable structural feature displays enhanced Na‐ion storage capabilities with good rate performance and outstanding cycling stability. As expected, the designed SIBs with flexible BL?CoSe₂/PCC electrode display excellent reversible capacity with 360.7 mAh g^?1 after 180 cycles at a current density of 0.1 A g^?1.     

Hierarchical porous carbon/selenium composites derived from abandoned paper cup as Li-Se battery cathodes

Paper cup composed of crude cellulose is a common waste in daily life. In this paper, hierarchical porous carbons have been successfully prepared by an initial hydrothermal treatment and subsequent activation route from abandoned paper cup, and then paper cup derived carbons are used as scaffolds to fabricate serial carbon/Se composites. The optimal composite presents unique 3D porous structure, with amorphous selenium uniformly confined into the micropores of carbon. As the cathode materials of Li-Se battery, this composite reveals an initial reversible discharge capacity of 517.2 mAh g⁻¹ at 0.2C, and a capacity value of 431.9 mAh g⁻¹ can be retained after 60 cycles. Even at a high rate of 4C, a capacity value of 295.8 mAh g⁻¹ can be obtained. By comparison, the improved electrochemical performance of the optimal composite should be attributed to reasonable porous structure and effective encapsulation of amorphous selenium.     

Nanostructured Carbon/Antimony Composites as Anode Materials for Lithium‐Ion Batteries with Long Life

A series of nanostructured carbon/antimony composites have been successfully synthesized by a simple sol–gel, high‐temperature carbon thermal reduction process. In the carbon/antimony composites, antimony nanoparticles are homogeneously dispersed in the pyrolyzed nanoporous carbon matrix. As an anode material for lithium‐ion batteries, the C/Sb10 composite displays a high initial discharge capacity of 1214.6 mAh g^?1 and a reversible charge capacity of 595.5 mAh g^?1 with a corresponding coulombic efficiency of 49 % in the first cycle. In addition, it exhibits a high reversible discharge capacity of 466.2 mAh g^?1 at a current density of 100 mA g^?1 after 200 cycles and a high rate discharge capacity of 354.4 mAh g^?1 at a current density of 1000 mA g^?1. The excellent cycling stability and rate discharge performance of the C/Sb10 composite could be due to the uniform dispersion of antimony nanoparticles in the porous carbon matrix, which can buffer the volume expansion and maintain the integrity of the electrode during the charge–discharge cycles.     

Building Hierarchical Microcubes Composed of One-Dimensional CoSe2@Nitrogen-Doped Carbon for Superior Sodium Ion Batteries

Designing and synthesizing highly stable anode materials with high capacity is critical for the practical application of sodium ion batteries (SIBs), however, to date, this remains an insurmountable barrier. The introduction of hierarchical architectures and carbon supports is proving an effective strategy for addressing these challenges. Thus, we have fabricated a hierarchical CoSe₂@nitrogen-doped carbon (CoSe₂@NC) microcube composite using the Prussian blue analogue Co₃[Co(CN)₆]₂ as template. The rational combination of the unique hierarchical construction from one to three dimensions and a nitrogen-doped carbon skeleton facilitates sodium ion and electron transport as well as stabilizing the host structure during repeated discharge/charge processes, which contributes to its excellent sodium storage capability. As expected, the as-prepared CoSe₂@NC composite delivered remarkable reversible capacity and ultralong cycling lifespan even at a high rate of 2.0 A g⁻¹ (384.3 mA h g⁻¹ after1800 loops) when serving as the anode material for SIBs. This work shows the great potential of the CoSe₂-based anode for practical application in SIBs, and the original strategy may be extended to other anode materials.     

Large Scale Synthesis of Three-dimensional Hierarchical Porous Framework with High Conductivity and its Application in Lithium Sulfur Battery

Quick capacity loss due to the polysulfide shuttle effects and poor rate performance caused by low conductivity of sulfur have always been obstacles to the commercial application of lithium sulfur batteries. Herein, an in-situ doped hierarchical porous biochar materials with high electron-ion conductivity and adjustable three-dimensional (3D) macro-meso-micropore is prepared successfully. Due to its unique physical structure, the resulting material has a specific surface area of 2124.9 m² g⁻¹ and a cumulative pore volume of 1.19 cm³ g⁻¹. The presence of micropores can effectively physically adsorb polysulfides and mesopores ensure the accessibility of lithium ions and active sites and give the porous carbon material a high specific surface area. The large pores provide channels for the storage of electrolyte and the transmission of ions on the surface of the substrate. The combined effect of these three kinds of pores and the N doping formed in-situ can effectively promote the cycle and rate performance of the battery. Therefore, prepared cathode can still reach a reversible discharge capacity of 616 mAh g⁻¹ at a rate of 5 C. After 400 charge–discharge cycles at 1 C, the reversible capacity is maintained at 510.0 mAh g⁻¹. This new strategy has provided a new approach to the research and industrial-scale production of adjustable hierarchical porous biochar materials.     

Amorphous MnO2 as Cathode Material for Sodium‐ion Batteries

Amorphous MnO₂ has been prepared from the reduction of KMnO₄ in ethanol media by a facile one‐step wet chemical route at room temperature. The electrochemical properties of amorphous MnO₂ as cathode material in sodium‐ion batteries (SIBs ) are studied by galvanostatic charge/discharge testing. And the structure and morphologies of amorphous MnO₂ are investigated by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), transmission electron microscopy (TEM ) and Raman spectra. The results reveal that as‐synthesized amorphous MnO₂ electrode material exhibits a spherical morphology with a diameter between 20 and 60 nm. The first specific discharge capacity of the amorphous MnO₂ electrode is 123.2 mAh •g⁻¹ and remains 136.8 mAh •g⁻¹ after 100 cycles at the current rate of 0.1 C. The specific discharge capacity of amorphous MnO₂ is maintained at 139.2, 120.4, 89, 68 and 47 mAh •g⁻¹ at the current rate of 0.1 C, 0.2 C, 0.5 C, 1 C and 2 C, respectively. The results indicate that amorphous MnO₂ has great potential as a promising cathode material for SIBs .     

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are one of the most promising high-energy-density storage systems. However, serious capacity attenuation and poor cycling stability induced by the shuttle effect of polysulfide intermediates can impede the practical application of Li-S batteries. Herein we report a novel sulfur cathode by intertwining multi-walled carbon nanotubes (CNTs) and porous boron nitride fibers (BNFs) for the subsequent loading of sulfur. This structural design enables trapping of active sulfur and serves to localize the soluble polysulfide within the cathode region, leading to low active material loss. Compared with CNTs/S, CNTs/BNFs/S cathodes deliver a high initial capacity of 1222 mAh g⁻¹ at 0.1 C. Upon increasing the current density to 4 C, the cell retained a capacity of 482 mAh g⁻¹ after 500 cycles with a capacity decay of only 0.044 % per cycle. The design of CNTs/BNFs/S gives new insight on how to optimize cathodes for Li-S batteries.     

Sulfur–carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte

Sulfur–carbon nano-composite with elemental sulfur incorporated in porous carbon was prepared by thermal treatment of a mixture of sulfur and active carbon. The new material was characterized by X-ray diffraction, BET and scanning electron microscopy. The nano-composite, tested at room temperature as cathode in a nonaqueous lithium cell based on PVDF gel electrolyte, exhibited a reversible capacity of 440 mAh g⁻¹ at a current density of 0.3 mA cm⁻². The utilization of electrochemically active sulfur was about 90% assuming a complete reaction to the product of Li₂S during cycling.     

A layered δ-MnO2 nanoflake cathode with high zinc-storage capacities for eco-friendly battery applications

This study reports the use of a layered-type birnessite δ-MnO₂ nano-flake cathode for eco-friendly zinc-ion battery (ZIB) applications. The present δ-MnO₂ was prepared via the simple low temperature thermal decomposition of KMnO₄. The X-ray diffraction (XRD) pattern of the samples was well indexed to the δ-MnO₂ phase. Field emission SEM and TEM images of the δ-MnO₂ revealed flake-like morphologies with an average diameter of 200 nm. The electrochemical properties, investigated by cyclic voltammetry and constant current charge-discharge measurements, revealed that the nano-flake cathode exhibited first discharge capacity of 122 mAh g^− 1 under a high current density of 83 mA g^− 1 versus zinc. The discharge capacity thereafter increased until it reached 252 mAh g^− 1 in the fourth cycle. On the hundredth cycle, the electrode registered a discharge capacity of 112 mAh g^− 1. Coulombic efficiencies of nearly 100% were maintained on prolonged cycling and thereby indicate the long cycle stability of the δ-MnO₂. Besides, the realization of specific capacities of 92 and 30 mAh/g at high current densities of 666 and 1333 mA g⁻¹, respectively, clearly demonstrates the decent rate capabilities of δ-MnO₂ nano-flake cathode. These results may facilitate the utilization of layered-type birnessite δ-MnO₂ in ZIB applications.     

Electrochemically Driven Transformation of Amorphous Carbons to Crystalline Graphite Nanoflakes: A Facile and Mild Graphitization Method

Although, in the carbon family, graphite is the most thermodynamically stable allotrope, conversion of other carbon allotropes, even amorphous carbons, into graphite is extremely hard. We report a simple electrochemical route for the graphitization of amorphous carbons through cathodic polarization in molten CaCl₂ at temperatures of about 1100 K, which generates porous graphite comprising petaloid nanoflakes. This nanostructured graphite allows fast and reversible intercalation/deintercalation of anions, promising a superior cathode material for batteries. In a Pyr₁₄TFSI ionic liquid, it exhibits a specific discharge capacity of 65 and 116 mAh g⁻¹ at a rate of 1800 mA g⁻¹ when charged to 5.0 and 5.25 V vs. Li/Li⁺, respectively. The capacity remains fairly stable during cycling and decreases by only about 8 % when the charge/discharge rate is increased to 10000 mA g⁻¹ during cycling between 2.25 and 5.0 V.     

Advanced all-solid-state lithium-selenium batteries enabled by selenium-nitrogen doped hierarchic meso-microporous carbon nanospheres composite cathode

Selenium, an element belonging to the same group in the periodic table as sulfur, has a high electronic conductivity(1 × 10^-5S/cm) and a high volumetric energy density(3253 mA h/cm³), which is a prospective cathode material for high-energy all-solid-state rechargeable batteries. However, its wide use is hindered by large volume expansion and low utilization rate. In this work, Se-infused nitrogen-doped hierarchical meso-microporous carbon composites(Se/NHPC) are prepared by...     

Amorphous Selenium and Crystalline Selenium Nanorods Graphene Composites as Cathode Materials for All-Solid-State Lithium Selenium Batteries

Selenium (Se) is an element in the same main group as sulfur and is characterized by high electrical conductivity and large capacity (675 mAh g⁻¹). Herein, a novel ultra-high dispersion amorphous selenium graphene composite (a-Se/rGO) was synthesized and a selenium nanorods graphene composite (b-Se/rGO) was prepared by hydrothermal method as the cathode material for all solid-state lithium−selenium (Li−Se) batteries, hoping to improve the efficiency and utilization rate of active substances in all solid-state batteries. The all-solid-state batteries were assembled using a heated thawing electrolyte (2LiIHPN−LiI; HPN=3-hydroxypropionitrile). The utilization rate of a-Se/rGO was 103 % and the capacity was 697 mAh g⁻¹, which remained at 281 mAh g⁻¹ (41.6 % of the 675 mAh g⁻¹) after 30 cycles under 0.5 C. Notably, a-Se/rGO showed excellent performance concerning its utilization rate, with a capacity of up to 610 mAh g⁻¹ at 2 C, due to the high availability of amorphous Se and the special properties of the electrolytes. However, in the charge and discharge cycles, the second discharge capacity of a-Se/rGO was more significantly attenuated than that of the first discharge due to the formation of larger crystals of selenium during the charging process. The battery assembled using b-Se/rGO maintained a capacity of 270.58 mAh g⁻¹ after 30 cycles (the retention rate of discharge capacity was 66.13 % compared with that in the first cycle). Through TEM and other relevant tests, it is speculated that amorphous selenium is conducive to capacity release, which, however, is affected by the formation of crystalline selenium after the first charge process.     

Few-Layer MoS2 Nanosheets Encapsulated in N-Doped Carbon Hollow Spheres as Long-Life Anode Materials for Lithium-Ion Batteries

Two-dimensional molybdenum disulfide (MoS₂) has been recognized as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity, but its rapid capacity decay owing to poor conductivity, structure pulverization, and polysulfide dissolution presents significant challenges in practical applications. Herein, triple-layered hollow spheres in which MoS₂ nanosheets are fully encapsulated between inner carbon and outer nitrogen-doped carbon (NC) were fabricated. Such an architecture provides high conductivity and efficient lithium-ion transfer. Moreover, the NC shell prevents aggregation and exfoliation of MoS₂ nanosheets and thus maintains the integrity of the nanostructure during the charge/discharge process. As anode materials for LIBs, the C@MoS₂@NC hollow spheres deliver a high reversible capacity (747 mA h g⁻¹ after 100 cycles at 100 mA g⁻¹) and excellent long-cycle performance (650 mA h g⁻¹ after 1000 cycles at 1.0 A g⁻¹), which confirm its potential for high-performance LIBs.     

Sulfur-/Nitrogen-Rich Albumen Derived “Self-Doping” Graphene for Sodium-Ion Storage

The development of sodium-ion batteries (SIBs) is hindered by the rapid reduction in reversible capacity of carbon-based anode materials. Outside-in doping of carbon-based anodes has been extensively explored. Nickel and NiS₂ particles embedded in nitrogen and sulfur codoped porous graphene can significantly improve the electrochemical performance. Herein a built-in heteroatom “self-doping” of albumen-derived graphene for sodium storage is reported. The built-in sulfur and nitrogen in albumen act as the doping source during the carbonization of proteins. The sulfur-rich proteins in albumen can also guide the doping and nucleation of nickel sulfide nanoparticles. Additionally, the porous architecture of the carbonized proteins is achieved through removable KCl/NaCl salts (medium) under high-temperature melting conditions. During the carbonization process, nitrogen can also reduce the carbonization temperature of thermally stable carbon materials. In this work, the NS-graphene delivered a specific capacity of 108.3 mAh g⁻¹ after 800 cycles under a constant current density of 500 mA g⁻¹. In contrast, the Ni/NiS₂/NS-graphene maintained a specific capacity of 134.4 mAh g⁻¹; thus the presence of Ni/NiS₂ particles improved the electrochemical performance of the whole composite.     

百香果皮基原位氮掺杂多孔碳/硫复合正极的制备及储锂性能

以生物质百香果皮为碳源,KHCO3为活化剂,采用同步活化碳化方法制备原位氮掺杂的分级多孔碳材料,将其与单质硫复合制得多孔碳/硫正极材料。通过X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等表征技术对制备材料的物相组成、微观形貌、比表面积及孔结构进行研究分析。同时,利用紫外可见吸收光谱研究了多孔碳对多硫化物的吸附作用,用恒电流充放电测试了不同硫含量(60%～80%)的多孔碳/硫复合正极材料的电化学性能。结果表明,制得的多孔碳材料为无定型,具有1 093 m²·g^-1的高比表面积和0.63 cm³·g^-1的孔容;丰富的多孔结构和原位氮掺杂对多硫化物的物理化学协同吸附作用,有效降低了锂硫电池的“穿梭效应”,提高了电池的放电比容量和循环性能。硫含量为60%的多孔碳/硫复合材料,在0.05C和0.2C倍率下可释放1 057.7和763.4 mAh·g^-1的高初始放电比容量,在1C的高倍率下循环300次后的保持率为75%。     

Facile Preparation of CuCo2S4/Cu7.2S4 Nanocomposites as High-Performance Cathode Materials for Rechargeable Magnesium Batteries**

Rechargeable magnesium batteries (RMBs) have been considered a promising energy-storage device due to their high energy density and high safety, but they still suffer from a lack of high-rate performance and cycle performance of the cathode. Nanosized CuCo₂S₄/Cu_7.2S₄ composites have been synthesized for the first time by a facile solvothermal method. Herein, the magnesium ion storage behavior when applied in the cathode for RMBs is discussed. Electrochemical results demonstrated that the CuCo₂S₄/Cu_7.2S₄ composites exhibit a high initial discharge capacity of 256 mAh g⁻¹ at 10 mA g⁻¹ and 123 mAh g⁻¹ at 300 mA g⁻¹ at room temperature and an outstanding long-term cyclic stability over 300 cycles at 300 mA g⁻¹. Furthermore, the electrochemical storage mechanism demonstrated that the storage process of magnesium ion in the CuCo₂S₄/Cu_7.2S₄ cathode is mainly driven by strong pseudocapacitive effects.     

Activated hierarchical porous carbon@π-conjugated polymer composite as cathode for high-performance lithium storage

Organic compounds become promising candidates for cathodes of rechargeable lithium battery (RLB) due to the high theoretical capacity and improved safety. However, they exhibit low conductivity and easy dissolution in electrolyte, which leads to the low utilization of active materials and poor cycling stability of RLBs. Here, we synthesize a novel composite of activated hierarchical porous carbon supporting poly(1,5-diamino-anthraquinone) (aHPC@PDAA), using Ce(SO₄)₂ as oxidant and naphthalenesulfonic acid (NSA) as soft template for PDAA. The as-synthesized composite exhibits uniformly nanoporous structure with nano-sized PDAA particles distributed homogenously inside and outside of pores. The aHPC@PDAA cathode for RLBs achieves high electrochemical performance with a discharge capacity as much as 250 mAh g^?1 at the current density of 100 mA g^?1, which still maintains 176 mAh g^?1 after 2000 charging-discharging cycles.     

Rechargeable Aluminium–Sulfur Battery with Improved Electrochemical Performance by Cobalt-Containing Electrocatalyst

The rechargeable aluminium–sulfur (Al–S) battery is regarded as a potential alternative beyond lithium-ion battery system owing to its safety, promising energy density, and the high earth abundance of the constituent electrode materials, however, sluggish kinetic response and short life-span are the major issues that limit the battery development towards applications. In this article, we report Co^II,III as an electrochemical catalyst in the sulfur cathode that renders a reduced discharge–charge voltage hysteresis and improved capacity retention and rate capability for Al–S batteries. The structural and electrochemical analysis suggest that the catalytic effect of Co^II,III is closely associated with the formation of cobalt sulfides and the changes in the valence states of the Co^II,III during the electrochemical reactions of the sulfur species, which lead to improved reaction kinetics and sulfur utilization in the cathode. The Al–S battery, assembled with the cathode consisting of Co^II,III decorated carbon matrix, demonstrates a considerably reduced voltage hysteresis of 0.8 V, a reversible specific capacity of ≈500 mAh g⁻¹ at 1 A g⁻¹ after 200 discharge–charge cycles and of ≈300 mAh g⁻¹ at 3 A g⁻¹.