Cu2+ in liquid ammonia—The impact of solvent flexibility and electron correlation in ab initio quantum mechanical charge field molecular dynamics

The impact of solvent flexibility and electron correlation on the simulation results of Cu²⁺ in liquid ammonia has been investigated via an ab initio quantum mechanical charge field molecular dynamics (QMCF MD) simulation approach. To achieve this, three different simulation systems were considered in this study, namely Cu²⁺ in rigid and flexible ammonia at Hartree-Fock (HF) level of theory, as well as resolution of identity second order Møller-Plesset (MP2) perturbation theory in the rigid body case. In all cases, a stable octahedral [Cu(NH₃)₆]²⁺ complex subject to dynamic Jahn-Teller distortions without the occurrence of ligand exchange was observed. The Cu²⁺ − NH₃ distance in the first shell agrees well with the experimental and other theoretical data. In all three cases, the structural data shows that the rigid-body ammonia model in conjunction with the HF level of theory provides accurate data for the first solvation shell, while at the same time, the computational demand and thus the achievable simulation time are much more beneficial. The vibrational analysis of the Cu²⁺ − NH₃ interaction yields similar force constants in the three investigated systems indicating that there is no distinct difference on the dynamical properties of the first solvation shell. In addition to the QMCF MD simulations, a number of natural bond orbital (NBO) analyses were carried out, confirming the strong electrostatic character of the Cu²⁺ − NH₃ interaction.     

Electrocatalytic Reduction of Nitrogen to Ammonia Using Tiara-like Phenylethanethiolated Nickel Cluster

The fixing of N₂ to NH₃ is challenging due to the inertness of the N≡N bond. Commercially, ammonia production depends on the energy-consuming Haber-Bosch (H−B) process, which emits CO₂ while using fossil fuels as the sources of hydrogen and energy. An alternative method for NH₃ production is the electrochemical nitrogen reduction reaction (NRR) process as it is powered by renewable energy sources. Here, we report a tiara-like nickel-thiolate cluster, [Ni₆(PET)₁₂] (where, PET=2-phenylethanethiol)] as an efficient electro-catalyst for the electrochemical NRR at ambient conditions. Ammonia (NH₃: 16.2±0.8 μg h⁻¹ cm⁻²) was the only nitrogenous product over the potential of −2.3 V vs. F_c⁺/F_c with a Faradaic efficiency of 25%±1.7. Based on theoretical calculations, NRR by [Ni₆(PET)₁₂] proceeds through both the distal and alternating pathways with an onset potential of −1.84 V vs. RHE (i.e., −2.46 V vs. F_c⁺/F_c) which corroborates with the experimental findings.     

Stereospecificity and Self-Selectivity in the Generation of a Chiral Molecular Tetrahedron by Metal-Assisted Self-Assembly

The chiral bidentate ligand (S,S)-1 reacts stereospecifically with Ga³⁺ to generate a [Ga₄(L)₆]¹²⁻ molecular tetrahedron although similar ligands generate [Ga₂(L)₃]⁶⁻ complexes. The assembly of this complex is self-selective as a racemic mixture of the ligand sorts by chirality to generate an enantiomeric pair of homochiral complexes.     

Fe-Doped CoS2 Nanoarrays: Efficient Electrocatalytic Nitrate Reduction to Ammonia under Ambient Conditions

The electrocatalytic nitrate reduction reaction (NO₃⁻RR) enables the reduction of nitrate to ammonium ions under ambient conditions. It was considered as an alternative reaction for the production of ammonia (NH₃) in recent years. In this paper, we report that the Fe doping CoS₂ nanoarrays can effectively catalyze the formation of NH₃ from nitrate (NO₃⁻) under ambient conditions. This is mainly due to the increase of the NO₃⁻ reaction active site by Fe doping and the porous nanostructure of the catalyst, which greatly improves the catalytic activity. Specifically, at −0.9 V vs. RHE, the NH₃ yield rate (R_NH3) of Fe−CoS₂/CC is 17.8×10⁻² mmol h⁻¹ cm⁻² with Faraday Efficiency (FE) of 88.93 %. Besides, such catalyst shows good durability and catalytic stability, which provides the possibility for the future application of electrocatalytic NH₃ production.     

Catalytic Ammonia Oxidation to Dinitrogen by a Nickel Complex

We report a nickel complex for catalytic oxidation of ammonia to dinitrogen under ambient conditions. Using the aryloxyl radical 2,4,6-tri-tert-butylphenoxyl (^tBu₃ArO⋅) as a H atom acceptor to cleave the N−H bond of a coordinated NH₃ ligand up to 56 equiv of N₂ per Ni center can be generated. Employing the N-oxyl radical 2,2,6,6-(tetramethylpiperidin-1-yl)oxyl (TEMPO⋅) as the H-atom acceptor, up to 15 equiv of N₂ per Ni center are formed. A bridging Ni-hydrazine product identified by isotopic nitrogen (¹⁵N) studies and supported by computational models indicates the N−N bond forming step occurs by bimetallic homocoupling of two paramagnetic [Ni]−NH₂ fragments. Ni-mediated hydrazine disproportionation to N₂ and NH₃ completes the catalytic cycle.     

Highly Efficient Electrochemical Nitrate and Nitrogen Reduction to Ammonia under Ambient Conditions on Electrodeposited Cu-Nanosphere Electrode

The electrochemical reduction reaction of nitrogenous species such as NO₃⁻ (NO₃RR) and N₂ (NRR) is a promising strategy for producing ammonia under ambient conditions. However, low activity and poor selectivity of both NO₃RR and NRR remain the biggest problem of all current electrocatalysts. In this work, we fabricated Cu-nanosphere film with a high surface area and dominant with a Cu(200) facet by simple electrodeposition method. The Cu-nanosphere film exhibits high electrocatalytic activity for NO₃RR and NRR to ammonia under ambient conditions. In the nitrate environment, the Cu-nanosphere electrode reduced NO₃⁻ to yield NH₃ at a rate of 5.2 mg/h cm², with a Faradaic efficiency of 85 % at −1.3 V. In the N₂-saturated environment, the Cu-nanosphere electrode reduced N₂ to yield NH₃ with the highest yield rate of 16.2 μg/h cm² at −0.5 V, and the highest NH₃ Faradaic efficiency of 41.6 % at −0.4 V. Furthermore, the Cu-nanosphere exhibits excellent stability with the NH₃ yield rate, and the Faradaic efficiency remains stable after 10 consecutive cycles. Such high levels of NH₃ yield, selectivity, and stability at low applied potential are among the best values currently reported in the literature.     

Properties of nanostructured GaN prepared by different methods

Various methods have been employed to prepare nanostructured GaN exhibiting reasonable surface areas. The methods include ammonolysis of γ-Ga₂O₃ or Ga₂O₃ prepared in the presence of a surfactant, and the reaction of a mixture of Ga₂O₃ and Ga(acac)₃ with NH₃. The latter reaction was also carried out in the presence of H₃BO₃. All the methods yield good GaN samples as characterized by X-ray diffraction, electron microscopy and photoluminescence measurements. Relatively high surface areas were obtained with the GaN samples prepared by the ammonolysis of γ-Ga₂O₃ (53 m² g⁻¹), and of Ga₂O₃ prepared in the presence of a surfactant (66 m² g⁻¹). GaN obtained by the reaction of NH₃ with a mixture of Ga₂O₃, Ga(acac)₃ and boric acid gave a surface area of 59 m² g⁻¹. GaN nanoparticles prepared by the nitridation of mesoporous Ga₂O₃ samples generally retain some porosity.     

Durable Electrocatalytic Reduction of Nitrate to Ammonia over Defective Pseudobrookite Fe2TiO5 Nanofibers with Abundant Oxygen Vacancies

We propose the pseudobrookite Fe₂TiO₅ nanofiber with abundant oxygen vacancies as a new electrocatalyst to ambiently reduce nitrate to ammonia. Such catalyst achieves a large NH₃ yield of 0.73 mmol h⁻¹ mg⁻¹_cat. and a high Faradaic Efficiency (FE) of 87.6 % in phosphate buffer saline solution with 0.1 M NaNO₃, which is lifted to 1.36 mmol h⁻¹ mg⁻¹_cat. and 96.06 % at −0.9 V vs. RHE for nitrite conversion to ammonia in 0.1 M NaNO₂. It also shows excellent electrochemical durability and structural stability. Theoretical calculation reveals the enhanced conductivity of this catalyst and an extremely low free energy of −0.28 eV for nitrate adsorption at the presence of vacant oxygen.     

Coordination-Induced N−H Bond Splitting of Ammonia and Primary Amine of CuI−MOFs

We report a porous three-dimensional anionic tetrazolium based Cu^I−MOF 1 , which is capable of cleaving the N−H bond of ammonia and primary amine, as well as the O−H bond of H₂O along with spontaneous H₂ evolution. In the gas-solid phase reaction of 1 with ammonia and water vapor, Cu^I−MOF 1 was gradually oxidized to NH₂−Cu^II−MOF and OH−Cu^II−MOF, through single-crystal-to-single-crystal (SCSC) structural transformations, which was confirmed by XPS, PXRD and X-ray single-crystal diffraction. Density functional theory (DFT) demonstrated that Cu^I−MOF could lower N−H bond dissociation free energy of ammonia through coordination-induced bond weakening and promote H₂ evolution by the reduction potential of 1 . To our knowledge, this is the first example of MOFs that activate ammonia and amine in gas-solid manner.     

A Dinuclear Uranium Complex [{UO2F2(NH3)}2(μ-F)2]2− from Reaction of TlF and UO2F2 in Liquid Anhydrous Ammonia and Fluoride Ion Affinities for Some Uranyl(VI) Species [UO2Fx]2−x and [UO2Fx(NH3)5−x]2−x

UO₂F₂ abstracts F⁻ anions from TlF in liquid ammonia solution and the compound [Tl₂(NH₃)₆][{UO₂F₂(NH₃)}₂(μ-F)₂] is formed. The compound has been characterized by single crystal X-ray diffraction, Raman spectroscopy and quantum-chemical calculations for the solid state. Quantum-chemical investigation of the [{UO₂F₂(NH₃)}₂(μ-F)₂]²⁻ anion showed that the U−(μ-F)−U σ-3c-4e-bond is essentially ionic. The [Tl₂(NH₃)₆]²⁺ cation shows a thallophilic Tl⋅⋅⋅Tl interaction. Fluoride ion affinities (FIAs) were calculated for different UO₂²⁺ species [UO₂F_x]^2−x and [UO₂F_x(NH₃)_5−x]^2−x with x=0 to 4.     

High Ammonia Uptake of a Metal–Organic Framework Adsorbent in a Wide Pressure Range

Although numerous porous adsorbents have been investigated for NH₃ capture applications, these materials often exhibit insufficient NH₃ uptake, low NH₃ affinity at the ppm level, and poor chemical stability against wet NH₃ conditions. The NH₃ capture properties of M₂(dobpdc) complexes (M=Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, and Zn²⁺; dobpdc⁴⁻=4,4-dioxidobiphenyl-3,3-dicarboxylate) that contain open metal sites is presented. The NH₃ uptake of Mg₂(dobpdc) at 298 K was 23.9 mmol g⁻¹ at 1 bar and 8.25 mmol g⁻¹ at 570 ppm, which are record high capacities at both pressures among existing porous adsorbents. The structural stability of Mg₂(dobpdc) upon exposure to wet NH₃ was superior to that of the other M₂(dobpdc) and the frameworks tested. Overall, these results demonstrate that Mg₂(dobpdc) is a recyclable compound that exhibits significant NH₃ affinity and capacity, making it a promising candidate for real-world NH₃-capture applications.     

UF6 and UF4 in Liquid Ammonia: [UF7(NH3)]3− and [UF4(NH3)4]

From the reaction of uranium hexafluoride UF₆ with dry liquid ammonia, the [UF₇(NH₃)]^3? anion and the [UF₄(NH₃)₄] molecule were isolated and identified for the first time. They are found in signal‐green crystals of trisammonium monoammine heptafluorouranate(IV) ammonia (1:1; [NH₄]₃[UF₇(NH₃)] ? NH₃) and emerald‐green crystals of tetraammine tetrafluorouranium(IV) ammonia (1:1; [UF₄(NH₃)₄] ? NH₃). [NH₄]₃[UF₇(NH₃)] ? NH₃ features discrete [UF₇(NH₃)]^3? anions with a coordination geometry similar to a bicapped trigonal prism, hitherto unknown for U^IV compounds. The emerald‐green [UF₄(NH₃)₄] ? NH₃ contains discrete tetraammine tetrafluorouranium(IV) [UF₄(NH₃)₄] molecules. [UF₄(NH₃)₄] ? NH₃ is not stable at room temperature and forms pastel‐green [UF₄(NH₃)₄] as a powder that is surprisingly stable up to 147 °C. The compounds are the first structurally characterized ammonia complexes of uranium fluorides.     

The Onset of Dehydrogenation in Solid Ammonia Borane: An Ab Initio Metadynamics Study

The discovery of effective hydrogen storage materials is fundamental for the progress of a clean energy economy. Ammonia borane (H₃BNH₃, AB) has attracted great interest as a promising candidate but the reaction path that leads from its solid phase to hydrogen release is not yet fully understood. To address the need for insights in the atomistic details of such a complex solid state process, in this work we use ab‐initio molecular dynamics and metadynamics to study the early stages of AB dehydrogenation. We show that the formation of ammonia diborane (H₃NBH₂(μ‐H)BH₃) leads to the release of NH₄⁺, which in turn triggers an autocatalytic H₂ production cycle. Our calculations provide a model for how complex solid state reactions can be theoretically investigated and rely upon the presence of multiple ammonia borane molecules, as substantiated by standard quantum‐mechanical simulations on a cluster.     

Approaching Dissolved Species in Ammonoacidic GaN Crystal Growth: A Combined Solution NMR and Computational Study

Solutions of gallium trihalides GaX₃ (X=F, Cl, Br, I) and their ammoniates in liquid ammonia were studied at ambient temperature under autogenous pressure by multinuclear (⁷¹Ga, ³⁵Cl, ⁸¹Br) NMR spectroscopy. To unravel the role of pH, the analyses were done both in absence and in presence of ammonium halides, which are employed as mineralizers during ammonoacidic gallium nitride crystal growth. While gallium trifluoride and its ammoniate were found to be too sparingly soluble to give rise to a NMR signal, the spectra of solutions of the heavier halides reveal the presence of a single gallium-containing species in all cases. DFT calculations and molecular dynamics simulations suggest the identification of this species as consisting of a [Ga(NH₃)₆]³⁺ cation and up to six surrounding halide anions, resulting in an overall trend towards negative complex charge. Quantitative ⁷¹Ga NMR studies on saturated solutions of GaCl₃ containing various amounts of additional NH₄Cl revealed a near linear increase of GaCl₃ solubility with mineralizer concentration of about 0.023 mol GaCl₃ per mol NH₄Cl at room temperature. These findings reflect the importance of Coulombic shielding for the inhibition of oligomerization and precipitation processes and help to rationalize both the low solubility of gallium halides in neutral ammonia solution and, in turn, the proliferating effect of the mineralizer during ammonoacidic gallium nitride formation.     

Reactions of Beryllium Halides in Liquid Ammonia: The Tetraammineberyllium Cation [Be(NH3)4]2+, its Hydrolysis Products,and the Action of Be2+ as a Fluoride‐Ion Acceptor

The first structural characterization of the text‐book tetraammineberyllium(II) cation [Be(NH₃)₄]²⁺, obtained in the compounds [Be(NH₃)₄]₂Cl₄ ? 17NH₃ and [Be(NH₃)₄]Cl₂, is reported. Through NMR spectroscopic and quantum chemical studies, its hydrolysis products in liquid ammonia were identified. These are the dinuclear [Be₂(μ‐OH)(NH₃)₆]³⁺ and the cyclic [Be₂(μ‐OH)₂(NH₃)₄]²⁺ and [Be₃(μ‐OH)₃(NH₃)₆]³⁺ cations. The latter species was isolated as the compound [Be₃(μ‐OH)₃(NH₃)₆]Cl₃ ? 7NH₃. NMR analysis of solutions of BeF₂ in liquid ammonia showed that the [BeF₂(NH₃)₂] molecule was the only dissolved species. It acts as a strong fluoride‐ion acceptor and forms the [BeF₃(NH₃)]^? anion in the compound [N₂H₇][BeF₃(NH₃)]. The compounds presented herein were characterized by single‐crystal X‐ray structure analysis, ⁹Be, ¹⁷O, and ¹⁹F NMR, IR, and Raman spectroscopy, deuteration studies, and quantum chemical calculations. The extension of beryllium chemistry to the ammine system shows similarities but also decisive differences to the aquo system.     

Solution Characteristics for Adsorption of Copper Ion with Iron(III) Hydroxide from Aqueous Ammonia Solution

The distribution of copper ion species in aqueous ammonia solution is evaluated as a function of pH by a numerical approach. Adsorption of copper on colloidal iron(III) hydroxide in solutions of total ammonia (0.14-1.2 M) are performed at various values of pH. The maximum efficiency of adsorption occurs when the sum of the fractions of the species Cu(NH₃)²⁺, Cu(NH₃)₂²⁺ and Cu(NH₃)₃²⁺ in the solution reaches its maximum. With varied solution pH, the distribution of copper species is the determining factor for maximum adsorption, whereas the surface properties of the adsorbing particles show smaller effects under the test conditions.     

Formation of an Azaruthenacyclopentadiene Skeleton via Ammonia Activation by an Electron-Deficient Ru3 Cluster

A dicationic triruthenium complex containing a μ₃-η³-C₃ ring, [(Cp*Ru)₃(μ₃-η³-C₃MeH₂−)(μ₃-CH)(μ-H)]²⁺ ( 1 a , Cp*=η⁵-C₅Me₅), reacted with ammonia to yield a μ-amido complex, [(Cp*Ru)₃(μ₃-η³-CHCMeCH) (μ₃-CH)(μ-NH₂)]²⁺ ( 5 ), via N−H bond scission. Subsequent treatment with base resulted in C−N bond formation to yield a μ₃-η²:η²-1-azabutadien-4-yl complex, [(Cp*Ru)₃(μ₃-CH)(μ₃-η²:η²-NH=CH−CMe=CH−)]⁺ ( 6 a ). The azaruthenacyclopentadiene skeleton was alternatively synthesized by the photolysis of mono-cationic complex [(Cp*Ru)₃(μ₃-η³-C₃RH₂−)(μ₃-CH)]⁺ ( 2 a ; R=Me, 2 b ; R=H) in the presence of ammonia. The C₃ ring skeleton was broken via the electron transfer to the π*(C−C) orbital in the C₃ ring, and a transiently generated unsaturated μ₃-allylic species can take up ammonia, resulting in N−H bond scission followed by C−N bond formation.     

Tandem Electrocatalytic Nitrate Reduction to Ammonia on MBenes

We demonstrate the great feasibility of MBenes as a new class of tandem catalysts for electrocatalytic nitrate reduction to ammonia (NO₃RR). As a proof of concept, FeB₂ is first employed as a model MBene catalyst for the NO₃RR, showing a maximum NH₃-Faradaic efficiency of 96.8 % with a corresponding NH₃ yield of 25.5 mg h⁻¹ cm⁻² at −0.6 V vs. RHE. Mechanistic studies reveal that the exceptional NO₃RR activity of FeB₂ arises from the tandem catalysis mechanism, that is, B sites activate NO₃⁻ to form intermediates, while Fe sites dissociate H₂O and increase *H supply on B sites to promote the intermediate hydrogenation and enhance the NO₃⁻-to-NH₃ conversion.     

Enhancing Electrochemical Nitrate Reduction to Ammonia over Cu Nanosheets via Facet Tandem Catalysis

Electrochemical conversion of nitrate (NO₃⁻) into ammonia (NH₃) represents a potential way for achieving carbon-free NH₃ production while balancing the nitrogen cycle. Herein we report a high-performance Cu nanosheets catalyst which delivers a NH₃ partial current density of 665 mA cm⁻² and NH₃ yield rate of 1.41 mmol h⁻¹ cm⁻² in a flow cell at −0.59 V vs. reversible hydrogen electrode. The catalyst showed a high stability for 700 h with NH₃ Faradaic efficiency of ≈88 % at 365 mA cm⁻². In situ spectroscopy results verify that Cu nanosheets are in situ derived from the as-prepared CuO nanosheets under electrochemical NO₃⁻ reduction reaction conditions. Electrochemical measurements and density functional theory calculations indicate that the high performance is attributed to the tandem interaction of Cu(100) and Cu(111) facets. The NO₂⁻ generated on the Cu(100) facets is subsequently hydrogenated on the Cu(111) facets, thus the tandem catalysis promotes the crucial hydrogenation of *NO to *NOH for NH₃ production.     

Zinc Tetracyanoplatinate: A Reversible Luminescence-Based Ammonia Sensor

ZnPt(CN)₄ was shown to be an effective material for ammonia sensing, and can be synthesized using either solution or mechanochemical methods. A combination of luminescence and Raman spectroscopy revealed that multiple species are involved in the reaction between ammonia and ZnPt(CN)₄. The crystal structure of one of these species, Zn(NH₃)₂Zn(NH₃)₃(Pt(CN)₄)₂, was elucidated. Detection of ammonia vapor down to 50 ppm in air was accomplished by monitoring the luminescence spectrum. The reaction between ZnPt(CN)₄ and ammonia vapor is reversible, and can be cycled multiple times by either flowing air over the material or heating. ZnPt(CN)₄ also has a relatively high thermal stability, decomposing only when heated above 420 °C.