Estimation of apparent binding constant of complexes of selected acyclic nucleoside phosphonates with β‐cyclodextrin by affinity capillary electrophoresis

Affinity capillary electrophoresis (ACE) has been applied to estimation of apparent binding constant of complexes of (R,S)‐enantiomers of selected acyclic nucleoside phosphonates (ANPs) with chiral selector β‐cyclodextrin (βCD) in aqueous alkaline medium. The noncovalent interactions of five pairs of (R,S)‐enantiomers of ANPs‐based antiviral drugs and their derivatives with βCD were investigated in the background electrolyte (BGE) composed of 35 or 50 mM sodium tetraborate, pH 10.0, and containing variable concentration (0–25 mM) of βCD. The apparent binding constants of the complexes of (R,S)‐enantiomers of ANPs with βCD were estimated from the dependence of effective electrophoretic mobilities of (R,S)‐enantiomers of ANPs (measured simultaneously by ACE at constant reference temperature 25°C inside the capillary) on the concentration of βCD in the BGE using different nonlinear and linear calculation methodologies. Nonlinear regression analysis provided more precise and accurate values of the binding constants and a higher correlation coefficient as compared to the regression analysis of the three linearized plots of the effective mobility dependence on βCD concentration in the BGE. The complexes of (R,S)‐enantiomers of ANPs with βCD have been found to be relatively weak – their apparent binding constants determined by the nonlinear regression analysis were in the range 13.3–46.4 L/mol whereas the values from the linearized plots spanned the interval 12.3–55.2 L/mol.     

Combination of capillary electrophoresis and molecular modeling to study the enantiomer affinity pattern between β‐blockers and anionic cyclodextrin derivatives in a methanolic and water background electrolyte

In order to have deep insights into the mechanisms of enantiomer affinity pattern in both aqueous and non‐aqueous systems, an approach combining capillary electrophoresis and molecular modeling was undertaken. A chiral β‐blocker; acebutolol, was enantioseparated in aqueous capillary electrophoresis and non‐aqueous capillary electrophoresis using two anionic β‐cyclodextrin derivatives. The enantiomer affinity pattern of acebutolol was found to be opposite when an aqueous background electrolyte was replaced with non‐aqueous background electrolyte in the presence of heptakis(2,3‐di‐O‐acetyl‐6‐sulfo)‐β‐cyclodextrin but remained the same in the presence of heptakis(2,3‐di‐O‐methyl‐6‐sulfo)‐β‐cyclodextrin. Molecular docking of acebutolol into two β‐cyclodextrin derivatives indicated two distinct binding modes called ‘up’ and ‘down’ conformations. After structure optimization by molecular dynamics and energy minimization, both enantiomers of acebutolol were preferred to the ‘up’ conformation with heptakis(2,3‐di‐O‐methyl‐6‐sulfo)‐β‐cyclodextrin while ‘down’ conformation with heptakis(2,3‐di‐O‐acetyl‐6‐sulfo)‐β‐cyclodextrin. The further calculation of the complex energy with solvent effect indicated that heptakis(2,3‐di‐O‐acetyl‐6‐sulfo)‐β‐cyclodextrin had higher affinity to S‐acebutolol than R‐acebutolol in non‐aqueous capillary electrophoresis while it showed better binding to R‐acebutolol in aqueous capillary electrophoresis. However, the heptakis(2,3‐di‐O‐methyl‐6‐sulfo)‐β‐cyclodextrin bound better to R‐acebutolol in both aqueous and non‐aqueous capillary electrophoresis, implying that the binding mode played more important role in chiral separation of heptakis(2,3‐di‐O‐methyl‐6‐sulfo)‐β‐cyclodextrin while the solvent effect had prevailing impact on heptakis(2,3‐di‐O‐acetyl‐6‐sulfo)‐β‐cyclodextrin.     

Development and validation of a chiral capillary electrophoresis method for assay and enantiomeric purity control of pramipexole

A rapid method for the enantioseparation of pramipexole and its R‐enantiomer has been developed by capillary electrophoresis. The influence of chemical and instrumental parameters was investigated including the type and concentration of chiral selectors, buffer composition and pH, co‐ions, applied voltage, capillary length and temperature. Optimal separation conditions were obtained using a 50 mM phosphate buffer (pH 2.8) containing 25 mM carboxymethyl‐β‐cyclodextrin on a fused‐silica capillary. Online UV detection was performed at 262 nm. A voltage of 25 kV was applied, and the capillary temperature was kept at 25°C. Hydrodynamic injection was performed at 3.45 kPa for 5.0 s. The separation of enantiomers was achieved in <6.5 min. The method was further validated in terms of stability of solutions, selectivity, linearity (both pramipexole and R‐enantiomer, R²>0.995), LOD and LOQ (0.91 and 2.94 μg/mL, respectively), repeatability (RSD<1.5%) and accuracy (pramipexole, 100.4%; R‐enantiomer, 100.5%). The proposed method was then applied to two kinds of pramipexole dihydrochloride monohydrate commercially available tablets, immediate release tablets (1.50 and 0.125 mg) and sustained release tablets (0.52 mg), to quantify the main component in the tablets. The amount of distomer could be quantified in bulk sample materials.     

Estimation of binding constants between ristocetin and teicoplanin and peptides using on-column ligand derivatization coupled to affinity capillary electrophoresis

This work utilizes on-column ligand synthesis and affinity capillary electrophoresis (ACE) to determine binding constants (K_b) of 9-flourenylmethyloxy carbonyl (Fmoc)-amino acid derivatives to the glycopeptide antibiotics ristocetin (Rist) and teicoplanin (Teic). In this technique, two separate plugs of sample are injected on to the capillary column and electrophoresed. The initial sample plug contains a d-Ala-d-Ala terminus peptide and either one or two non-interacting standard(s). The second plug contains a Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester. The electrophoresis is then carried out with an increasing concentration of Rist or Teic in the running buffer. Upon electrophoresis the initial d-Ala-d-Ala peptide reacts with the Fmoc-amino acid yielding a new Fmoc-amino acid-d-Ala-d-Ala peptide derivative. Continued electrophoresis results in the binding of Rist or Teic to the Fmoc-amino acid-d-Ala-d-Ala peptide derivatives. Analysis of the change in the relative migration time ratio (RMTR) or electrophoretic mobility () of the Fmoc-amino acid-d-Ala-d-Ala peptide derivatives relative to the non-interacting standards, as a function of the concentration of Rist and Teic, yields a value for K_b. These findings demonstrate the advantage of coupling on-column ligand synthesis to ACE for estimating binding parameters between antibiotics and ligands.Abbreviations Rist Ristocetin - Teic Teicoplanin - ACE Affinity capillary electrophoresis - RMTR Relative migration time ratio     

Evaluation of interactions between RAW264.7 macrophages and small molecules by capillary electrophoresis

In this study, the affinity interactions between RAW 264.7 macrophages and three small molecules including naringin, oleuropein and paeoniflorin were evaluated by affinity capillary electrophoresis (ACE), partial filling affinity capillary electrophoresis (PFACE) and frontal analysis capillary electrophoresis (FACE), respectively. The result indicated that ACE (varying concentrations of cell suspension were filled in the capillary as receptor) may not be suitable for the evaluation of interactions between cell and small molecules due to the high viscosity of cell suspension; PFACE can qualitatively evaluate the interaction, but the difference in viscosity between RAW264.7 suspension and buffer effects on the liner relationship between filling length and injection time, which makes the calculation of binding constant difficult. Furthermore, based on the PFACE results, naringin showed stronger interaction with macrophages than the other two molecules; taking advantage of the aggregation phenomenon of cell induced by electric field, FACE was successfully used to determine the stoichiometry (n = 5×10⁹) and binding constant (K_b = 1×10⁴ L/mol) of the interaction between RAW264.7 and naringin.     

Multiple-injection affinity capillary electrophoresis to estimate binding constants of receptors to ligands

Multiple-injection affinity capillary electrophoresis (MIACE) is used to determine binding constants (K _b) between receptors and ligands using as model systems vancomycin and teicoplanin from Streptomyces orientalis and Actinoplanes teichomyceticus, respectively, and their binding to D-Ala-D-Ala peptides and carbonic anhydrase B (CAB. EC 4.2.1.1) and the binding of the latter to arylsulfonamides. A sample plug containing a non-interacting standard is first injected followed by multiple plugs of sample containing the receptor and then a final injection of sample containing a second standard. Between each injection of sample, a small plug of buffer is injected which contains an increasing concentration of ligand to effect separation between the multiple injections of sample. Electrophoresis is then carried out in an increasing concentration of ligand in the running buffer. Continued electrophoresis results in a shift in the migration time of the receptor in the sample plugs upon binding to their respective ligand. Analysis of the change in the relative migration time ratio (RMTR) or electrophoretic mobility (μ) of the resultant receptor–ligand complex relative to the non-interacting standards, as a function of the concentration of ligand yields a value for K _b. The MIACE technique is a modification in the ACE method that allows for the estimation of binding affinities between biological interactions on a timescale faster than that found for standard ACE. In addition sample volume requirements for the technique are reduced compared to traditional ACE assays. These findings demonstrate the advantage of using MIACE to estimate binding parameters between receptors and ligands.     

Partial-filling affinity capillary electrophoresis

Partial-filling affinity capillary electrophoresis (PFACE) is used to examine the binding interactions between two model biological systems: D-Ala-D-Ala terminus peptides to the glycopeptide antibiotic vancomycin (Van) from Streptomyces orientalis, and arylsulfonamides to carbonic anhydrase B (CAB, EC 4.2.1.1, bovine erythrocytes). Using these two systems, modifications in the PFACE technique are demonstrated including flow-through PFACE (FTPFACE), competitive flow-through PFACE (CFTPFACE), on-column ligand synthesis PFACE (OCLSPFACE), and multiple-step ligand injection PFACE (MSLIPFACE). In PFACE small plugs of sample are injected into the capillary column and an equilibrium is established between receptor and ligand during electrophoresis. Binding constants are then obtained by Scatchard analysis using changes in the migration time of the receptor/ligand on changing the concentration of the ligand/receptor. Data demonstrating the quantitative potential of these methods are presented. This review focuses on the unique capabilities of the different PFACE techniques as applied to two model biological systems.     

Tudy on drug displacement interactions by capillary electrophoresis-frontal analysis

The interaction between 18-methyl norethindrone and ketoprofen, including the displacement of ketoprofen from human serum albumin binding sites, was investigated by the capillary electrophoresis-frontal analysis method (CE-FA) at room temperature. A very large sample plug was introduced hydrostatically into the capillary (65 cm × 50 μm i.d.; effective length of 35 cm) over 80 s at a height difference of 11 cm. The working conditions for CE-FA separation are as follows: operating voltage, 10 kV; running buffer, 67 mmol·L⁻¹ phosphate, pH 7.4. The unbound ketoprofen concentration was directly measured from the height of the frontal peak. When the concentration of 18-methyl norethindrone was increased from 0 to 200 μmol/L, the unbound ketoprofen concentration was found to increase from 22.4 to 26.4 μmol/L at 100 μmol/L total ketoprofen concentration and from 82.1 to 106.2 μmol/L at 200 μmol/L total ketoprofen concentration. From these data, it may be deduced that the administration of high concentration of 18-methyl norethindrone can displace ketoprofen from its secondary binding site. __________ Translated from Chinese Journal of Chromatography, 2005, 23(2)(in Chinese)     

Development and validation of a capillary electrophoresis method for determination of enantiomeric purity and related substances of esomeprazole in raw material and pellets

A capillary electrophoresis method using CDs for quality control of esomeprazole (ESO) in terms of enantiomeric purity and related substances in raw material and pellets was developed. ESO is the S‐enantiomer of omeprazole (OMZ). Several parameters were evaluated, including type and concentration of buffer and CD, concentration of additives and electrolyte pH. Resolution between the enantiomers of OMZ obtained for each parameter tested was calculated and the presence of the main related substance such as OMZ sulfone was carefully monitored. The optimized system consisted of 100 mM Tris‐phosphate buffer pH 2.5 with 20 mM 2‐hydroxypropyl‐β‐CD, 1 mM sodium dithionite, temperature at 15°C, voltage at 28 kV, and UV detection at 301 nm. Once optimized, the electrophoretic system was validated according to ICH guidelines. The limits of detection and quantification for R‐OMZ were 0.6 μg/mL (0.06% w/w of ESO) and 2.0 μg/mL (0.2% w/w of ESO), respectively. A mean concentration of R‐OMZ <0.2% limit established by the United States Pharmacopeia (USP) was found in the raw material and six‐pellet samples of ESO. No other impurities were found in the samples under these conditions. Therefore, the developed method was found to be appropriate not only for enantiomeric quality control of ESO but also for the analysis of ESO and the main related substance in raw material and pharmaceutical formulations as well as for stability indicating studies.     

Acetic acid denaturing pulsed field capillary electrophoresis for RNA separation

Based on our previous work of in‐capillary denaturing polymer electrophoresis, we present a study of RNA molecular separation up to 6.0 kilo nucleotide by pulsed field CE. This is the first systematic investigation of electrophoresis of a larger molecular mass RNA in linear hydroxyethylcellulose (HEC) under pulsed field conditions. The parameters that may influence the separation performance, e.g. gel polymer concentration, modulation depth and pulse frequency, are analyzed in terms of resolution and mobility. For denaturing and separating RNA in the capillary simultaneously, 2 M acetic acid was added into the HEC polymer to serve as separation buffer. Result shows that (i) in pulsed field conditions, RNA separation can be achieved in a wide range of concentration of HEC polymer, and RNA fragments between 0.3 and 0.6 kilo nucleotide are sensitive to the polymer concentration; (ii) under certain pulsed field conditions, RNA fragments move linearly as the modulation depth increases; (iii) 12.5 Hz is the resonance frequency for RNA reorientation time and applied frequency.     

High-throughput capillary electrophoresis frontal analysis method for the study of drug interactions with human serum albumin at near-physiological conditions

The application of the short-end capillary injection to capillary electrophoresis frontal analysis (CE-FA) to study the interaction between basic, neutral and acid drugs towards human serum albumin (HSA) at near-physiological conditions is presented. The compounds selected display a wide range of binding affinities and the results obtained were in good agreement with those reported in the literature. An equation for the estimation of the number of primary binding sites and their corresponding affinity constants is developed isolating the experimentally measured variables in just one axis. The proposed CE-FA method to screen drug interactions with HSA under physiological conditions is simple, rapid and cost-effective what may facilitate its implementation in the drug discovery process.     

Study of the interactions between fluoroquinolones and human serum albumin by affinity capillary electrophoresis and fluorescence method

The interactions between fluoroquinolones and human serum albumin (HSA) were investigated by affinity capillary electrophoresis (ACE) and fluorescence quenching technique. Based on the efficient separation of several fluoroquinolones using a simple phosphate buffer, the binding constants of fluoroquinolones with HSA were determined simultaneously during one set of electrophoresis by ACE method. The thermodynamic parameters were obtained from data at different temperatures, and the negative ΔH and ΔS values showed that both hydrogen bonds and van der Waals interaction played major roles in the binding of fluoroquinolones to HSA. The interactions were also studied by fluorescence quenching technique. The results of fluorescence titration revealed that fluoroquinolones had the strong ability to quenching the intrinsic fluorescence of HSA through the static quenching procedure. The binding site number n, apparent binding constant K_b and the Stern-Volmer quenching constant K_sv were determined. The thermodynamic parameters were also studied by fluorescence method, and the results were consonant with that of ACE.     

Determination of rhein and physcion in rhubarb by microchip capillary electrophoresis in mixed hydro-organic solvent combined with laser-induced fluorescence detection

Microchip capillary electrophoresis in mixed hydro-organic solvent combined with laser-induced fluorescence detection was developed for the separation and detection of physcion and rhein in rhubarb. In contrast to the conventional capillary electrophoresis method, ammonium acetate-dimethyl sulfoxide was used as the basic buffer system in this method. The effects of background buffer, buffer apparent pH*, buffer concentration, water ratio, sample preparation method, and separation voltage on separation and detection were investigated. Optimized separation and detection conditions were obtained: the buffer consisted of 20 mmol/L of ammonium acetate in hydro-organic solvent composed dimethyl sulfoxide, formamide, and water mixed at 60/20/20 (v/v/v) ratio. The separation voltage was 1.9 kV. Under these conditions, the physcion, rhein, and other components of rhubarb can be completely separated within 150 s. Under the methodological verification, good linearity (R ≥ 0.9995) for physcion and rhein, and low limits of detection (0.085 μg·mL⁻¹ and 0.077 μg·mL⁻¹, respectively), satisfactory peak area precisions, migration time precisions (1.74%–3.09%), and accuracy (recovery rate 97.8% and 101.4%) were achieved. It is shown that the proposed method is simple, efficient, fast, sensitive, simple instrument, consumes few samples, has low operating cost, and is linear.     

Estimation of binding constants of receptors and ligands by affinity capillary electrophoresis

An estimation method for determination of binding constants of receptors to ligands by affinity capillary electrophoresis was evaluated. On the basis of the theories of pseudostationary phase or so-called dynamic stationary phase, the retention factor (k) was used to represent the interaction between the receptor and ligand. k could be easily deduced from the migration times of the ligand and the receptor. Then, with the linear relationship of k versus the concentration of ligand in the running buffer, the binding constant K _b was calculated from the slope and intercept. In order to test its feasibility, the calculation method was demonstrated using three model systems: the interactions between vancomycin and N-acetyl-d-Ala-d-Ala, ristocetin and N-acetyl-d-Ala-d-Ala, and carbonic anhydrase B and an arylsulfonamide. Estimated binding constants were compared with those determined by other techniques. The results showed that this estimation method was reliable. This calculation method offers a simple and easy approach to estimating binding constants of ligands to receptors.     

毛细管电泳应用于测定牛血清白蛋白与脂质体的相互作用

建立了一种用毛细管电泳法检测牛血清白蛋白(BSA)与脂质体相互作用的分析方法。氧化指数的测定实验结果表明经过冷冻干燥的脂质体稳定性更好;毛细管电泳表征脂质体的电荷性质实验结果表明脂质体在pH 5.0～8.0的条件下呈电中性。在pH 7.0的条件下,以各种浓度的脂质体混悬液为电泳缓冲液,以0.8%二甲亚砜(DMSO)为内标,随着缓冲液中脂质体质量浓度从0增加到2.4 mg/mL,BSA的有效淌度从-2.232×10-4 cm2·V－1·s－1变化到-3.046×10-4 cm2·V－1·s－1;结合Scatchard分析,测得BSA与脂质体的结合常数为2.522×103(g/mL)－1。该方法简单、快速,为研究蛋白质与脂质体的相互作用提供了新的技术手段。     

Investigation of isomerization of dexibuprofen in a ball mill using chiral capillary electrophoresis

Besides the racemate, the S-enantiomer of ibuprofen (Ibu) is used for the treatment of inflammation and pain. Since the configurational stability of S-Ibu in solid state is of interest, it was studied by means of ball milling experiments. For the evaluation of the enantiomeric composition, a chiral CE method was developed and validated according to the ICH guideline Q2(R1). The addition of Mg²⁺, Ca²⁺, or Zn²⁺ ions to the background electrolyte (BGE) was found to improve Ibu enantioresolution. Chiral separation of Ibu enantiomers was achieved on a 60.2 cm (50.0 cm effective length) x 75 μm fused-silica capillary using a background electrolyte (BGE) composed of 50 mM sodium acetate, 10 mM magnesium acetate tetrahydrate, and 35 mM heptakis-(2,3,6-tri-O-methyl)-β-cyclodextrin (TM-β-CD) as chiral selector. The quantification of R-Ibu in the mixture was performed using the normalization procedure. Linearity was evaluated in the range of 0.68–5.49% R-Ibu (R² = 0.999), recovery was found to range between 97 and 103%, the RSD of intra- and interday precision below 2.5%, and the limit of quantification for R- in S-Ibu was calculated to be 0.21% (extrapolated) and 0.15% (dilution of racemic ibuprofen), respectively. Isomerization of S-Ibu was observed under basic conditions by applying long milling times and high milling frequencies.     

Determination of binding constants between the antibiotic ristocetin A and D-Ala-D-Ala terminus peptides by affinity capillary electrophoresis

Summary Binding constants between the antibiotic ristocetin A (Rist A) and D-Ala-D-Ala terminus peptides were determined using affinity capillary electrophoresis (ACE). In these experiments two techniques are used to obtain binding constants. In the first, a plug of Rist A and non-interacting standards are injected and electrophoresed. Analysis of the change in the relative migration time ratio (RMTR) of Rist, relative to the non-interacting standards, as a function of the concentration of peptide, yields a value for the binding constant (Kb). In the second, samples of peptide and standards are injected and electrophoresed in increasing concentrations of Rist A in the running buffer. Analysis using theRMTR yields aK _b. The findings described here demonstrate the advantage of using ACE for estimating binding parameters between antibiotics and ligands.     

Separation of acidic and basic proteins by capillary electrophoresis using gemini surfactants and gemini-capped nanoparticles as buffer additives

This paper demonstrated simultaneous separation of acidic and basic proteins using cationic gemini surfactants as buffer additives in capillary electrophoresis. We showed that even at a low concentration (0.1 mmol·L-1) of alkanediyl-α,ω-bis(dimethyloctadecylammonium bromide) (18-s-18), the wall adsorption of both acidic and basic proteins could be effectively suppressed under acidic conditions. Smaller micelle size (e.g., s=5-8) is more effective for the separation of acidic proteins than larger micelle siz...     

Comparison of various capillary electrophoretic approaches for the study of drug–protein interaction with emphasis on minimal consumption of protein sample and possibility of automation†

The binding ability of a drug to plasma proteins influences the pharmacokinetics of a drug. As a result, it is a very important issue in new drug development. In this study, affinity capillary electrophoresis, capillary electrophoresis with frontal analysis, and Hummel Dreyer methods with internal and external calibration were used to study the affinity between bovine serum albumin and salicylic acid. The binding constant was measured by all these approaches including the equilibrium dialysis, which is considered to be a reference method. The comparison of results and other considerations showed the best electrophoretic approach to be capillary electrophoresis‐frontal analysis, which is characterized by the high sample throughput with the possibility of automation, very small quantities of biomacromolecules, simplicity, and a short analysis time. The mechanism of complex formation was then examined by capillary electrophoresis with frontal analysis. The binding parameters were determined and the corresponding thermodynamic parameters such as Gibbs free energy ΔG⁰, enthalpy ΔH⁰, and entropy changes ΔS⁰ at various temperatures were calculated. The results showed that the binding of bovine serum albumin and salicylic acid was spontaneous, and that hydrogen bonding and van der Waals forces played a major role in the formation of the complex.