Fluorinated Photovoltaic Materials for High‐Performance Organic Solar Cells

Over the past decade, organic solar cells (OSCs) have achieved a dramatic boost in their power conversion efficiencies from about 6 % to over 16 %. In addition to developments in device engineering, innovative photovoltaic materials, especially fluorinated donors and acceptors, have become the dominant factor for improved device performance. This minireview highlights fluorinated photovoltaic materials that enable efficient OSCs. Impressive OSCs have been obtained by developing some important molds of fluorinated donor and acceptor systems. The molecular design strategy and the matching principle of fluorinated donors and acceptors in OSCs are discussed. Finally, a concise summary and outlook are presented for advances in fluorinated materials to realize the practical application of OSCs.     

无机材料在有机太阳能电池中的应用

无机材料电子迁移率高、光谱响应范围与太阳光谱匹配,而有机材料价格低廉、合成方法简单、容易制作在基底上,因此在太阳能电池中具有更广阔的应用前景。 目前,阻碍有机太阳能电池发展的主要原因是材料的载流子迁移率低、器件稳定性差、吸收光谱与太阳光谱不匹配,导致光电转换效率较低。 若能将有机、无机材料二者的优点相结合,将可提高有机太阳能电池的能量转换效率。 目前的研究已经取得了一定进展,无机材料在受体层、阴极缓冲层、阳极缓冲层中的应用均不同程度地提高了有机太阳能电池的能量转换效率。 本文综述了目前该领域的研究现状,并对今后的研究提出了展望。     

Controlling the Treatment Time for Ideal Morphology towards Efficient Organic Solar Cells

In this work, we performed a systematic comparison of different duration of solvent vapor annealing (SVA) treatment upon state-of-the-art PM6:SY1 blend film, which is to say for the first time, the insufficient, appropriate, and over-treatment’s effect on the active layer is investigated. The power conversion efficiency (PCE) of corresponding organic solar cell (OSC) devices is up to 17.57% for the optimized system, surpassing the two counterparts. The properly tuned phase separation and formed interpenetrating network plays an important role in achieving high efficiency, which is also well-discussed by the morphological characterizations and understanding of device physics. Specifically, these improvements result in enhanced charge generation, transport, and collection. This work is of importance due to correlating post-treatment delicacy, thin-film morphology, and device performance in a decent way.     

非富勒烯聚合物太阳电池研究进展

综述了以p-型共轭聚合物为给体、n-型有机半导体为受体的非富勒烯聚合物太阳电池光伏材料最新研究进展,包括n-型共轭聚合物和可溶液加工小分子n-型有机半导体(n-OS)受体光伏材料,以及与之匹配的p-型共轭聚合物给体光伏材料.介绍的n-型共轭聚合物受体光伏材料包括基于苝酰亚胺(BDI)、萘酰亚胺(NDI)以及新型硼氮键连受体单元的D-A共聚物受体光伏材料,目前基于聚合物给体(J51)和聚合物受体(N2200)的全聚合物太阳电池的能量转换效率最高达到8.26%.n-OS小分子受体光伏材料包括基于BDI和NDI单元的有机分子、基于稠环中心给体单元的A-D-A型窄带隙有机小分子受体材料等.给体光伏材料包括基于齐聚噻吩和苯并二噻吩(BDT)给体单元的D-A共聚物,重点介绍与窄带隙A-D-A结构小分子受体吸收互补的、基于噻吩取代BDT单元的中间带隙二维共轭聚合物给体光伏材料.使用中间带隙的p-型共轭聚合物为给体、窄带隙A-D-A结构有机小分子为受体的非富勒烯聚合物太阳电池能量转换效率已经突破12%,展示了光明的前景.最后对非富勒烯聚合物太阳电池将来的发展进行了展望.     

有机染料敏化纳米晶太阳能电池

本文综述了有机染料敏化纳米晶太阳能电池的研究现状,简要介绍了有机染料敏化纳米晶太阳能电池的结构和工作原理以及氧化物电极、对电极和电解质的设计思路和制备情况。重点介绍了有机染料的研究现状,包括香豆素类染料、多烯类染料、噻吩类染料、天然染料、半花菁类染料、卟啉类染料、三苯胺类染料、苝类染料等。同时讨论了若干影响有机染料敏化太阳能电池性能的因素,提出了提高光电转换效率的设想与对策,对未来的发展进行了展望。     

SnS‐Quantum Dot Solar Cells Using Novel TiC Counter Electrode and Organic Redox Couples

Low‐cost quantum‐dot sensitized solar cells (QDSSCs) were fabricated by using the earth‐abundant element SnS quantum dot, novel TiC counter electrodes, and the organic disulfide/thiolate (T₂/T^?) redox couple, and reached an efficiency of 1.03 %. QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples were assembled to study the role of the redox couples in the regeneration of sensitizers. Charge‐extraction results reveal the reasons for the difference in J_SC in three QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples. The catalytic selectivity of TiC and Pt towards T₂/T^? and I^?/I₃^? redox couples was investigated using Tafel polarization and electrochemical impedance analysis. These results indicated that Pt and TiC show a similar catalytic selectivity for I^?/I₃^?. However, TiC possesses better catalytic activity for T₂/T^? than for I^?/I₃^?. These results indicate the great potential of transition metal carbide materials and organic redox couples used in QDSSCs.     

Mixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting

Hybrid organic–inorganic lead halide perovskite APbX₃ pigments, such as methylammonium lead iodide, have recently emerged as excellent light harvesters in solid‐state mesoscopic solar cells. An important target for the further improvement of the performance of perovskite‐based photovoltaics is to extend their optical‐absorption onset further into the red to enhance solar‐light harvesting. Herein, we show that this goal can be reached by using a mixture of formamidinium (HN=CHNH₃⁺, FA) and methylammonium (CH₃NH₃⁺, MA) cations in the A position of the APbI₃ perovskite structure. This combination leads to an enhanced short‐circuit current and thus superior devices to those based on only CH₃NH₃⁺. This concept has not been applied previously in perovskite‐based solar cells. It shows great potential as a versatile tool to tune the structural, electrical, and optoelectronic properties of the light‐harvesting materials.     

Harvesting Solar Light with Crystalline Carbon Nitrides for Efficient Photocatalytic Hydrogen Evolution

Described herein is the photocatalytic hydrogen evolution using crystalline carbon nitrides (CNs) obtained by supramolecular aggregation followed by ionic melt polycondensation (IMP) using melamine and 2,4,6‐triaminopyrimidine as a dopant. The solid state NMR spectrum of ¹⁵N‐enriched CN confirms the triazine as a building unit. Controlling the amount and arrangements of dopants in the CN structure can dramatically enhance the photocatalytic performance for H₂ evolution. The polytriazine imide (PTI) exhibits the apparent quantum efficiency (AQE) of 15 % at 400 nm. This method successfully enables a substantial amount of visible light to be harvested for H₂ evolution, and provides a promising route for the rational design of a variety of highly active crystalline CN photocatalysts.     

Ternary Blend Strategy for Achieving High-Efficiency Organic Photovoltaic Devices for Indoor Applications

Monomeric perylene diimide (PDI) small molecules display a high absorption coefficient and crystallinity in solid-state thin films due to strong π–π interactions between the molecules. To take advantage of these exciting properties of PDIs, N,N'-bis(1-ethylpropyl)perylene-3,4,9,10-tetracarboxylic diimide (EP-PDI) was mixed with a binary blend of PTB7 and PC₇₁BM to fabricate an efficient ternary blend, which were in turn used to produce organic photovoltaic (OPV) devices well suited to indoor applications (PTB7=poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}), PC₇₁BM=[6,6]-phenyl-C₇₁-butyric acid methyl ester). We varied the PC₇₁BM/EP-PDI weight ratio to investigate the influence of EP-PDI on the optical, electrical, and morphological properties of the PTB7:PC₇₁BM:EP-PDI ternary blend. Compared with the reference PTB7:PC₇₁BM binary blend, the ternary blends showed strong optical absorption in the wavelength range in which the spectra of indoor LED lamps show their strongest peaks. The addition of EP-PDI to the binary blend was found to play an important role in altering the morphology of the blend in such a way as to facilitate charge transport in the resulting ternary blend. Apparently, as a result, the optimal PTB7:PC₇₁BM:EP-PDI-based inverted OPV device exhibited a power conversion efficiency (PCE) of 15.68 %, a fill factor (FF) of 68.5 %, and short-circuit current density (J_SC) of 56.7 μA cm⁻² under 500 lx (ca. 0.17 mW cm⁻²) indoor LED light conditions.     

Diketopyrrolopyrrole‐Based and Tetracyano‐Bridged Small Molecules for Bulk Heterojunction Organic Solar Cells

Research on bulk heterojunction organic solar cells has rapidly grown over the past two decades, and device performance has reached power conversion efficiencies over 13 %. In this focus review, we highlight design strategies used for the development of diketopyrrolopyrrole‐ and tetracyano‐based molecular donors. We also describe how tetracyano‐bridged non‐fullerene acceptors can be developed by a click‐type [2+2]‐cycloaddition–electrocyclic ring‐opening reaction of acetylene‐bridged small molecules with tetracyanoethylene by simple modification.     

纯有机染料共敏化纳米晶太阳能电池的性能研究

采用曙红与香豆素混合的方法,配制成敏化剂修饰纳米晶薄膜.实验结果证明,这种共敏化的方法可以在可见光范围内有效提高电池的吸光度,使得电池的性能比单独使用曙红敏化有了大幅度提高.在模拟太阳光下,曙红与香豆素共敏化的电池的开路电压达到了532 mV,短路电流达到了0.1125 mA/cm2.     

Towards Green Synthesis and Processing of Organic Solar Cells

In 2018, several major breakthroughs have been achieved in organic solar cells (OSCs) with the record power conversion efficiency (PCE) reaching over 17 %. With this increased efficiency, it is time to take a step forward to consider how to convert this technology into large scale production. For this, the economic and environmental profile of OSCs should be taken seriously‐simplified synthetic routes and green chemistry methods should be applied. According to previous studies, OSCs are competitive and profitable in the commercial market. However, toxic and/or hazardous chemicals are currently used in materials synthesis and device fabrication of OSCs. In this account, we will talk about contributions and efforts we have made to minimize the economic and environmental disadvantages in the production of OSCs. We will start with the background on how our projects were conceived and will specifically discuss our work on direct arylation and green solvent. Developments of direct arylation for synthesizing conjugated polymers will be illustrated along with our recent finding regarding the effect of green solvents on device performance and stability.     

聚合物太阳能电池材料的研究进展

有机光伏技术为太阳能的有效利用提供了一条重要途径。有机太阳能电池因制造成本低廉、材料质量轻、加工性能好、易于携带等优势而备受关注。提高有机太阳能电池的光电转换效率是目前乃至未来的研究重点。设计和合成适合的窄带隙的共轭聚合物是提高有机太阳能电池光电转化效率的核心。综述了近年来基于窄带隙的共轭聚合物的太阳能电池材料的设计、制备和器件性能研究进展,探讨了目前存在的亟待解决的关键基础问题和未来发展方向。     

退火处理提高P3HT:PCBM聚合物太阳能电池光伏性能

利用旋转涂膜方法制备了以P3HT:PCBM为有源层的聚合物太阳能电池, 器件结构为ITO/PEDOT:PSS/P3HT:PCBM/Al(氧化铟锡导电玻璃/聚二氧乙基噻吩:聚对苯乙烯磺酸/聚三已基噻酚:富勒烯衍生物/铝),研究了退火温度对聚合物太阳能电池性能的影响. 实验发现: 聚合物薄膜经过120 °C退火10 min处理后, 开路电压(V_oc)达到0.64 V, 短路电流密度(J_sc)为10.25 mA·cm^-2, 填充因子(FF) 38.1%, 光电转换效率(PCE)达到2.00%. 为了讨论其内在机制, 对不同退火条件下聚合物薄膜进行了各种表征. 从紫外-可见吸收光谱中发现, 退火处理使P3HT在可见光范围内吸收加强且吸收峰展宽, 特别是在560和610 nm处的吸收强度明显增大; X射线衍射(XRD)结果表明, 120 °C退火后P3HT在(100)晶面上的衍射强度是未退火薄膜的2.8倍, 有利于光生载流子的输运; 原子力显微镜(AFM)研究结果表明, 退火显著增大了P3HT与PCBM的相分离程度, 提高了激子解离的几率; 傅里叶变换红外(FTIR)光谱验证了退火并没有引起聚合物材料物性的变化.     

High‐Performance Organic Solar Cells Based on a Non‐Fullerene Acceptor with a Spiro Core

Derived from perylenediimide (PDI) building blocks, 3D PDI molecules are considered as a type of promising structure to overcome molecular aggregation, thus improving the performance of organic solar cells. Herein, we report a novel PDI‐based derivative, SCPDT‐PDI₄ , with four PDI units connected to a unique spiro core. Attributed to this novel molecular design, SCPDT‐PDI₄ exhibits a rigid 3D structure, in which the aggregation tendency of PDI chromophores could be effectively attenuated. Additionally, strong intramolecular charge transfer and high charge mobility are achieved due to the well‐conjugated structure and electron‐rich property of SCPDT. Therefore, fullerene‐free organic solar cells based on SCPDT‐PDI₄ and PTB7‐Th achieve a remarkable high efficiency of 7.11 %. Such an excellent result demonstrates the opportunity of SCPDT to be a promising building block for non‐fullerene acceptors.     

退火处理提高P3HT:PCBM聚合物太阳能电池光伏性能

利用旋转涂膜方法制备了以P3HT:PCBM为有源层的聚合物太阳能电池, 器件结构为ITO/PEDOT:PSS/P3HT:PCBM/Al(氧化铟锡导电玻璃/聚二氧乙基噻吩:聚对苯乙烯磺酸/聚三已基噻酚:富勒烯衍生物/铝),研究了退火温度对聚合物太阳能电池性能的影响. 实验发现: 聚合物薄膜经过120 °C退火10 min处理后, 开路电压(V_oc)达到0.64 V, 短路电流密度(J_sc)为10.25 mA·cm^-2, 填充因子(FF) 38.1%, 光电转换效率(PCE)达到2.00%. 为了讨论其内在机制, 对不同退火条件下聚合物薄膜进行了各种表征. 从紫外-可见吸收光谱中发现, 退火处理使P3HT在可见光范围内吸收加强且吸收峰展宽, 特别是在560和610 nm处的吸收强度明显增大; X射线衍射(XRD)结果表明, 120 °C退火后P3HT在(100)晶面上的衍射强度是未退火薄膜的2.8倍, 有利于光生载流子的输运; 原子力显微镜(AFM)研究结果表明, 退火显著增大了P3HT与PCBM的相分离程度, 提高了激子解离的几率; 傅里叶变换红外(FTIR)光谱验证了退火并没有引起聚合物材料物性的变化.     

阴极界面修饰层改善平面p-i-n型钙钛矿太阳能电池的光伏性能

有机/无机杂化金属卤化物钙钛矿半导体材料结合了有机材料良好的溶液可加工性以及无机材料优越的光电特性,近几年受到了热捧,成为太阳能电池领域一颗耀眼的明星. 伴随着钙钛矿薄膜结晶过程和形貌的优化、器件结构的改进以及电极界面材料的开发,这类有机/无机杂化金属卤化物钙钛矿太阳能电池的光电转换效率从最初的3.8%迅速提高到目前最高的22.1%. 其中界面工程在提升器件性能上发挥着极其重要的作用. 本文总结了平面p-i-n型钙钛矿太阳能电池中阴极界面修饰层（CBL）的研究进展. CBL从材料上讲可分为无机金属氧化物、金属或金属盐以及有机材料,从构成上讲可分为单层CBL、双层CBLs以及共混型CBL. 本文对这些类型的CBL分别给予详细的介绍. 最后,我们归纳出CBL在改善器件效率和稳定性上所起的作用以及理想CBL所应满足的要求,希望能为以后阴极界面修饰材料的设计提供一定的借鉴.     

Triplet Tellurophene‐Based Acceptors for Organic Solar Cells

Triplet materials have been employed to achieve high‐performing organic solar cells (OSCs) by extending the exciton lifetime and diffusion distances, while the triplet non‐fullerene acceptor materials have never been reported for bulk heterojunction OSCs. Herein, for the first time, three triplet molecular acceptors based on tellurophene with different degrees of ring fusing were designed and synthesized for OSCs. Significantly, these molecules have long exciton lifetime and diffusion lengths, leading to efficient power conversion efficiency (7.52 %), which is the highest value for tellurophene‐based OSCs. The influence of the extent of ring fusing on molecular geometry and OSCs performance was investigated to show the power conversion efficiencies (PCEs) continuously increased along with increasing the extent of ring fusing.     

Naphthalene-Diimide-Based Ionenes as Universal Interlayers for Efficient Organic Solar Cells

Self-doping ionene polymers were efficiently synthesized by reacting functional naphthalene diimide (NDI) with 1,3-dibromopropane ( NDI-NI ) or trans-1,4-dibromo-2-butene ( NDI-CI ) via quaternization polymerization. These NDI-based ionene polymers are universal interlayers with random molecular orientation, boosting the efficiencies of fullerene-based, non-fullerene-based, and ternary organic solar cells (OSCs) over a wide range of interlayer thicknesses, with a maximum efficiency of 16.9 %. NDI-NI showed a higher interfacial dipole (Δ), conductivity, and electron mobility than NDI-CI , affording solar cells with higher efficiencies. These polymers proved to efficiently lower the work function (WF) of air-stable metals and optimize the contact between metal electrode and organic semiconductor, highlighting their power to overcome energy barriers of electron injection and extraction processes for efficient organic electronics.     

有机太阳能电池简介与展望

太阳能是一种非常重要的可再生能源。将太阳能转化为电能的有机太阳能电池,因其具有重量轻,柔韧性好,可以进行大面积、低成本的柔性制备等优点,为解决未来全球的能源问题提供了一种选择。简要介绍了有机太阳能电池的发展、性能参数、工作机理和应用实例。