Amorphous Co-P Film: an Efficient Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Seawater

Seawater electrolysis is considered an attractive alternative to conventional freshwater electrolysis for hydrogen production due to the abundance of seawater in nature. For this reason, efficient electrocatalysts for hydrogen evolution reaction (HER) in alkaline seawater are highly desired. In this study, we report an amorphous Co−P alloy on nickel foam (Co−P/NF) that behaves as an efficient and stable HER electrocatalyst for alkaline seawater electrolysis. The Co−P/NF presents high catalytic performance for HER, requiring a low overpotential of 213 mV to drive a current density of 100 mA cm⁻² and a Tafel slope of 120.2 mV dec⁻¹ in alkaline seawater. Furthermore, it shows remarkable electrochemical and structural stability in alkaline seawater.     

Ligand Modulation of Active Sites to Promote Cobalt-Doped 1T-MoS2 Electrocatalytic Hydrogen Evolution in Alkaline Media

Highly efficient hydrogen evolution reaction (HER) electrocatalyst will determine the mass distributions of hydrogen-powered clean technologies, while still faces grand challenges. In this work, a synergistic ligand modulation plus Co doping strategy is applied to 1T−MoS₂ catalyst via CoMo-metal-organic frameworks precursors, boosting the HER catalytic activity and durability of 1T−MoS₂. Confirmed by Cs corrected transmission electron microscope and X-ray absorption spectroscopy, the polydentate 1,2-bis(4-pyridyl)ethane ligand can stably link with two-dimensional 1T−MoS₂ layers through cobalt sites to expand interlayer spacing of MoS₂ (Co−1T−MoS₂-bpe), which promotes active site exposure, accelerates water dissociation, and optimizes the adsorption and desorption of H in alkaline HER processes. Theoretical calculations indicate the promotions in the electronic structure of 1T−MoS₂ originate in the formation of three-dimensional metal-organic constructs by linking π-conjugated ligand, which weakens the hybridization between Mo-3d and S-2p orbitals, and in turn makes S-2p orbital more suitable for hybridization with H-1s orbital. Therefore, Co−1T−MoS₂-bpe exhibits excellent stability and exceedingly low overpotential for alkaline HER (118 mV at 10 mA cm⁻²). In addition, integrated into an anion-exchange membrane water electrolyzer, Co−1T−MoS₂-bpe is much superior to the Pt/C catalyst at the large current densities. This study provides a feasible ligand modulation strategy for designs of two-dimensional catalysts.     

Boron-Induced Electronic-Structure Reformation of CoP Nanoparticles Drives Enhanced pH-Universal Hydrogen Evolution

Even though transition-metal phosphides (TMPs) have been developed as promising alternatives to Pt catalyst for the hydrogen evolution reaction (HER), further improvement of their performance requires fine regulation of the TMP sites related to their specific electronic structure. Herein, for the first time, boron (B)-modulated electrocatalytic characteristics in CoP anchored on the carbon nanotubes (B-CoP/CNT) with impressive HER activities over a wide pH range are reported. The HER performance surpasses commercial Pt/C in both neutral and alkaline media at large current density (>100 mA cm⁻²). A combined experimental and theoretical study identified that the B dopant could reform the local electronic configuration and atomic arrangement of bonded Co and adjacent P atoms, enhance the electrons’ delocalization capacity of Co atoms for high electrical conductivity, and optimize the free energy of H adsorption and H₂ desorption on the active sites for better HER kinetics.     

Molybdenum‐tungsten Oxide Nanowires Rich in Oxygen Vacancies as An Advanced Electrocatalyst for Hydrogen Evolution

Electrolysis of water is a promising way to produce hydrogen fuel in large scale. The commercialization of this technology requires highly efficient non‐noble metal electrocatalysts to decease the energy input for the hydrogen evolution reaction (HER). In this work, a novel nanowire structured molybdenum‐tungsten bimetallic oxide (CTAB‐D‐W₄MoO₃) is synthesized by a simple hydrothermal method followed with post annealing treatment. The obtained metal oxides feature with enhanced conductivity, rich oxygen vacancies and customized electronic structure. As such, the composite electrocatalyst exhibits excellent electrocatalytic performance for HER in an acidic environment, achieving a large current density of 100 mA cm^?2 at overpotential of only 286 mV and a small Tafel slope of 71.2 mV dec^?1. The excellent electrocatalytic HER performance of CTAB‐D‐W₄MoO₃ is attributed to the unique nanowire structure, rich catalytic active sites and promoted electron transfer rate.     

Atomically Dispersed Copper–Platinum Dual Sites Alloyed with Palladium Nanorings Catalyze the Hydrogen Evolution Reaction

Designing highly active catalysts at an atomic scale is required to drive the hydrogen evolution reaction (HER). Copper–platinum (Cu‐Pt) dual sites were alloyed with palladium nanorings (Pd NRs) containing 1.5 atom % Pt, using atomically dispersed Cu on ultrathin Pd NRs as seeds. The ultrafine structure of atomically dispersed Cu‐Pt dual sites was confirmed with X‐ray absorption fine structure (XAFS) measurements. The Pd/Cu‐Pt NRs exhibit excellent HER properties in acidic solution with an overpotential of only 22.8 mV at a current density of 10 mA cm⁻² and a high mass current density of 3002 A g⁻¹_(Pd+Pt) at a −0.05 V potential.     

Heterostructured Inter-Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition-metal-oxides (TMOs)-based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter-doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm⁻² and a small Tafel slope of 23.5 mV dec⁻¹, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm⁻². As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm⁻² for alkaline overall water splitting.     

Ni2P Interlayer and Mn Doping Synergistically Expedite the Hydrogen Evolution Reaction Kinetics of Co2P

Transition metal phosphide is regarded as one of the most promising candidates to replace noble-metal hydrogen evolution reaction (HER) electrocatalysts. Nevertheless, the controllable design and synthesis of transition metal phosphide electrocatalysts with efficient and stable electrochemical performance are still very challenging. Herein, a novel hierarchical HER electrocatalyst consisting of three-dimensional (3D) coral-like Mn-doped Co₂P@an intermediate layer of Ni₂P generated in situ by phosphorization on Ni foam (MnCoP/NiP/NF) is reported. Notably, both the incorporation of Mn and introduction of the Ni₂P interlayer promote Co atoms to carry more electrons, which is beneficial to reduce the force of the Co−H bond and optimize the adsorption energy of hydrogen intermediate (|ΔG_H*|), thereby making MnCoP/NiP/NF exhibit outstanding HER performance with onset overpotential and Tafel slope as low as 31.2 mV and 61 mV dec⁻¹, respectively, in 1 m KOH electrolyte.     

Boron‐Induced Electronic‐Structure Reformation of CoP Nanoparticles Drives Enhanced pH‐Universal Hydrogen Evolution

Even though transition‐metal phosphides (TMPs) have been developed as promising alternatives to Pt catalyst for the hydrogen evolution reaction (HER), further improvement of their performance requires fine regulation of the TMP sites related to their specific electronic structure. Herein, for the first time, boron (B)‐modulated electrocatalytic characteristics in CoP anchored on the carbon nanotubes (B‐CoP/CNT) with impressive HER activities over a wide pH range are reported. The HER performance surpasses commercial Pt/C in both neutral and alkaline media at large current density (>100 mA cm^?2). A combined experimental and theoretical study identified that the B dopant could reform the local electronic configuration and atomic arrangement of bonded Co and adjacent P atoms, enhance the electrons’ delocalization capacity of Co atoms for high electrical conductivity, and optimize the free energy of H adsorption and H₂ desorption on the active sites for better HER kinetics.     

Platinum Oxide Nanoparticles for Electrochemical Hydrogen Evolution: Influence of Platinum Valence State

Electrochemical hydrogen generation is a rising prospect for future renewable energy storage and conversion. Platinum remains a leading choice of catalyst, but because of its high cost and low natural abundance, it is critical to optimize its use. In the present study, platinum oxide nanoparticles of approximately 2 nm in diameter are deposited on carbon nitride (C3N4) nanosheets by thermal refluxing of C3N4 and PtCl₂ or PtCl₄ in water. These nanoparticles exhibit apparent electrocatalytic activity toward the hydrogen evolution reaction (HER) in acid. Interestingly, the HER activity increases with increasing Pt⁴⁺ concentration in the nanoparticles, and the optimized catalyst even outperforms commercial Pt/C, exhibiting an overpotential of only −7.7 mV to reach the current density of 10 mA cm⁻² and a Tafel slope of −26.3 mV dec⁻¹. The results from this study suggest that the future design of platinum oxide catalysts should strive to maximize the Pt⁴⁺ sites and minimize the formation of the less active Pt²⁺ species.     

Hierarchical Architectures Based on Ru Nanoparticles/Oxygen-Rich-Carbon Nanotubes for Efficient Hydrogen Evolution

Highly active and durable electrocatalysts are essential for producing hydrogen fuel through the hydrogen evolution reaction (HER). Here, a uniform deposition of Ru nanoparticles strongly interacting with oxygen-rich carbon nanotube architectures (Ru-OCNT) through ozonation and hydrothermal approaches has been designed. The hierarchical structure of Ru-OCNT is made by self-assembly of oxygen functionalities of OCNT. Ru nanoparticles interact strongly with OCNT at the Ru/OCNT interface to give excellent catalytic activity and stability of the Ru-OCNT, as further confirmed by density functional theory. Owing to the hierarchical structure and adjusted surface chemistry, Ru-OCNT has an overpotential of 34 mV at 10 mA cm⁻² with a Tafel slope of 27.8 mV dec⁻¹ in 1 M KOH, and an overpotential of 55 mV with Tafel slope of 33 mV dec⁻¹ in 0.5 M H₂SO₄. The smaller Tafel slope of Ru-OCNT than Ru-CNT and commercial Pt/C in both alkaline and acidic electrolytes indicates high catalytic activity and fast charge transfer kinetics. The as-proposed chemistry provides the rational design of hierarchically structured CNT/nanoparticle electrocatalysts for HER to produce hydrogen fuel.     

Vanadium‐Doped WS2 Nanosheets Grown on Carbon Cloth as a Highly Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Two‐dimensional transition‐metal dichalcogenides have been widely studied as electrocatalysts for the hydrogen evolution reaction (HER). However, limited active sites and poor conductivity hinder their application. To solve these disadvantages, heteroatom doping has attracted wide attention because it can not only increase the active sites but also affect the intrinsic catalytic properties of the electrocatalyst. Herein, we grew vanadium‐doped WS₂ nanosheets on carbon cloth (V‐WS₂/CC) as an electrocatalyst for HER under acidic and alkaline conditions. With a proper vanadium doping concentration, the electrochemical surface areas of V_0.065‐WS₂/CC were 9.6 and 2.6 times as large as that of pure WS₂ electrocatalyst under acidic and alkaline conditions, respectively. In addition, the charge‐transfer resistance also decreased with moderate vanadium doping. Based on this, the synthesized vanadium‐doped WS₂ nanosheets exhibited good stability with high HER catalytic activity and could reach a current density of 10 mA cm⁻² at overpotentials of 148 and 134 mV in 0.5 m H₂SO₄ and 1 m KOH, respectively. The corresponding Tafel slopes were 71 and 85 mV dec⁻¹. Therefore, our synthesized vanadium‐doped WS₂ nanosheets can be a promising electrocatalyst for the production of hydrogen over a wide pH range.     

Co−Co Dinuclear Active Sites Dispersed on Zirconium-doped Heterostructured Co9S8/Co3O4 for High-current-density and Durable Acidic Oxygen Evolution

Developing cost-effective and sustainable acidic water oxidation catalysts requires significant advances in material design and in-depth mechanism understanding for proton exchange membrane water electrolysis. Herein, we developed a single atom regulatory strategy to construct Co−Co dinuclear active sites (DASs) catalysts that atomically dispersed zirconium doped Co₉S₈/Co₃O₄ heterostructure. The X-ray absorption fine structure elucidated the incorporation of Zr greatly facilitated the generation of Co−Co DASs layer with stretching of cobalt oxygen bond and S−Co−O heterogeneous grain boundaries interfaces, engineering attractive activity of significantly reduced overpotential of 75 mV at 10 mA cm⁻², a breakthrough of 500 mA cm⁻² high current density, and water splitting stability of 500 hours in acid, making it one of the best-performing acid-stable OER non-noble metal materials. The optimized catalyst with interatomic Co−Co distance (ca. 2.80 Å) followed oxo-oxo coupling mechanism that involved obvious oxygen bridges on dinuclear Co sites (1,090 cm⁻¹), confirmed by in situ SR-FTIR, XAFS and theoretical simulations. Furthermore, a major breakthrough of 120,000 mA g⁻¹ high mass current density using the first reported noble metal-free cobalt anode catalyst of Co−Co DASs/ZCC in PEM-WE at 2.14 V was recorded.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

High Valence State Sites as Favorable Reductive Centers for High-Current-Density Water Splitting

Electrochemical water splitting is a promising approach for producing sustainable and clean hydrogen. Typically, high valence state sites are favorable for oxidation evolution reaction (OER), while low valence states can facilitate hydrogen evolution reaction (HER). However, here we proposed a high valence state of Co³⁺ in Ni_9.5Co_0.5−S−FeO_x hybrid as the favorable center for efficient and stable HER, while structural analogues with low chemical states showed much worse performance. As a result, the Ni_9.5Co_0.5−S−FeO_x catalyst could drive alkaline HER with an ultra-low overpotential of 22 mV for 10 mA cm⁻², and 175 mV for 1000 mA cm⁻² at the industrial temperature of 60 °C, with an excellent stability over 300 h. Moreover, this material could work for both OER and HER, with a low cell voltage being 1.730 V to achieve 1000 mA cm⁻² for overall water splitting at 60 °C. X-ray absorption spectroscopy (XAS) clearly identified the high valence Co³⁺ sites, while in situ XAS during HER and theoretical calculations revealed the favorable electron capture at Co³⁺ and suitable H adsorption/desorption energy around Co³⁺, which could accelerate the HER. The understanding of high valence states to drive reductive reactions may pave the way for the rational design of energy-related catalysts.     

One-Step Template/Solvent-Free Pyrolysis for In Situ Immobilization of CoP Nanoparticles onto N and P Co-Doped Carbon Porous Nanosheets towards High-efficiency Electrocatalytic Hydrogen Evolution

The search for economical, active and stable electrocatalysts towards the hydrogen evolution reaction (HER) is highly imperative for the progression of water electrolysis technology and related sustainable energy conversion technologies. The delicate optimization of chemical composition and architectural configuration is paramount to design high-efficiency non-precious metal HER electrocatalysts. Herein, we report a one-step scalable template/solvent-free pyrolysis approach for in situ immobilizing uniform CoP nanoparticles onto N and P co-doped carbon porous nanosheets (denoted as CoP@N,P-CNSs hereafter). The simultaneous consideration of architectural design and nanocarbon hybridization renders the formed CoP@N,P-CNSs with plentiful well-dispersed anchored active sites, shortened pathway for mass diffusion, enhanced electric conductivity, and reinforced mechanical stability. As a consequence, the optimized CoP@N,P-CNSs exhibit an overpotential of 115 mV to afford a current density of 10 mA cm⁻², small Tafel slope of 74.2 mV dec⁻¹, high Faradaic efficiency of nearly 100 %, and superb long-term durability in an alkaline medium. Given the fabrication feasibility, mass production potential and outstanding HER performance, the CoP@N,P-CNSs may hold great promise for large-scale electrochemical water splitting. More importantly, the explored one-step template/solvent-free pyrolysis methodology offers a feasible and versatile route to fabricate carbon nanosheet-based nanocomposites for diverse energy conversation-related applications.     

Regulating Efficient and Selective Single-atom Catalysts for Electrocatalytic CO2 Reduction

Anchoring transition metal (TM) atoms on suitable substrates to form single-atom catalysts (SACs) is a novel approach to constructing electrocatalysts. Graphdiyne with sp−sp² hybridized carbon atoms and uniformly distributed pores have been considered as a potential carbon material for supporting metal atoms in a variety of catalytic processes. Herein, density functional theory (DFT) calculations were performed to study the single TM atom anchoring on graphdiyne (TM₁−GDY, TM=Sc, Ti, V, Cr, Mn, Co and Cu) as the catalysts for CO₂ reduction. After anchoring metal atoms on GDY, the catalytic activity of TM₁−GDY (TM=Mn, Co and Cu) for CO₂ reduction reaction (CO₂RR) are significantly improved comparing with the pristine GDY. Among the studied TM₁−GDY, Cu₁−GDY shows excellent electrocatalytic activity for CO₂ reduction for which the product is HCOOH and the limiting potential (U_L) is −0.16 V. Mn₁−GDY and Co₁−GDY exhibit superior catalytic selectivity for CO₂ reduction to CH₄ with U_L of −0.62 and −0.34 V, respectively. The hydrogen evolution reaction (HER) by TM₁−GDY (TM=Mn, Co and Cu) occurs on carbon atoms, while the active sites of CO₂RR are the transition metal atoms . The present work is expected to provide a solid theoretical basis for CO₂ conversion into valuable hydrocarbons.     

Surfactant‐Assisted Phase‐Selective Synthesis of New Cobalt MOFs and Their Efficient Electrocatalytic Hydrogen Evolution Reaction

Reported herein are two new polymorphic Co‐MOFs (CTGU‐5 and ‐6) that can be selectively crystallized into the pure 2D or 3D net using an anionic or neutral surfactant, respectively. Each polymorph contains a H₂O molecule, but differs dramatically in its bonding to the framework, which in turn affects the crystal structure and electrocatalytic performance for hydrogen evolution reaction (HER). Both experimental and computational studies find that 2D CTGU‐5 which has coordinates water and more open access to the cobalt site has higher electrocatalytic activity than CTGU‐6 with the lattice water. The integration with co‐catalysts, such as acetylene black (AB) leads to a composite material, AB&CTGU‐5 (1:4) with very efficient HER catalytic properties among reported MOFs. It exhibits superior HER properties including a very positive onset potential of 18 mV, low Tafel slope of 45 mV dec⁻¹, higher exchange current density of 8.6×10⁻⁴ A cm⁻², and long‐term stability.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Distance Synergy of MoS2-Confined Rhodium Atoms for Highly Efficient Hydrogen Evolution

Perturbing the electronic structure of the MoS₂ basal plane by confining heteroatoms offers the opportunity to trigger in-plane activity for the hydrogen evolution reaction (HER). The key challenge consists of inducing the optimum HER activity by controlling the type and distribution of confined atoms. A distance synergy of MoS₂-confined single-atom rhodium is presented, leading to an ultra-high HER activity at the in-plane S sites adjacent to the rhodium. By optimizing the distance between the confined Rh atoms, an ultra-low overpotential of 67 mV is achieved at a current density of 10 mA cm⁻² in acidic solution. Experiments and first-principles calculations demonstrate a unique distance synergy between the confined rhodium atoms in tuning the reactivity of neighboring in-plane S atoms, which presents a volcanic trend with the inter-rhodium distance. This study provides a new strategy to tailor the activity of MoS₂ surface via modulating the distance between confined single atoms.