Ion dependence of magnetic anisotropy in MFe2O4 (MFe,Co, Mn) nanoparticles synthesized by high-temperature reaction

The influence of different M²⁺ cations on the effective magnetic anisotropy of systems composed of MFe₂O₄ (M=Fe, Co and Mn) nanoparticles was investigated. Samples were prepared by the high-temperature (538 K) solution phase reaction of Fe (acac)₃, Co (acac)₂ and Mn (acac)₂ with 1,2 octanodiol in the presence of oleic acid and oleylamine. The final particles are coated by an organic layer of oleic acid that prevents agglomeration. Transmission electron microscopy (TEM) images show that particles present near spherical form and a narrow grain size distribution, with mean diameters in the range of 4.5–7.6 nm. Powder samples were analyzed by ac susceptibility and Mössbauer measurements, and K_eff for all samples was evaluated using both techniques, showing a strong dependence on the nature of the divalent cation.     

Magnetic properties of FexCo1−x/CoyFe1−yFe2O4 composite under hydrothermal condition

The metal–ferrite composites Fe_xCo_1−x/Co_yFe_1−yFe₂O₄ are synthesized by using disproportion of Fe (II) and reduction of Co (II) by Fe⁰ under hydrothermal condition. The size of the particles of the composites decreases as the [KOH] decreasing. The composites are measured by TEM and it can be deduced that when [KOH] = 0.1, the size of the alloy body-centered cubic (BCC) in composites is 20 ± 7 nm, the size of the Cobalt ferrite (spinel) is 170 ± 50 nm. The maximal value of the saturation magnetization (Ms) of the composite is about 100.14 emu/g, which is synthesized under Co (II)/Fe (II) = 0.05, [KOH] = 1 N, T = 150 °C and t = 3 h. The value of Hc of the composite synthesized under Co (II)/Fe (II) = 0.5, t = 3 h, T = 150 °C and [KOH] = 10.2 mol/L is about 2878.19 Oe. The Fe–Co alloy is synthesized through a reduction reaction of the composites in a flowing gaseous mixture. There is a maximal value (302.9 emu/g) of the Ms for the alloys generated at 1000 °C, which is the Co_0.412Fe_0.588 alloy.     

The electronic behaviors of TiO2/MnO2/carbon clusters composite materials obtained by the calcination of a TiO(acac)2/Mn(acac)3/epoxy resin complex

The calcination of a TiO(acac)₂/Mn(acac)₃/epoxy resin complex under an oxygen atmosphere successfully produced nano-sized TiO₂/MnO₂/carbon clusters composite material. The surface characterizations of the resulting composites indicate that they are composed of nano-sized particles of TiO₂, MnO₂ and carbon clusters. ESR spectral examination suggests the possibility of an electron transfer in the process of MnO₂ → carbon clusters → TiO₂. The visible light-responsive oxidation–reduction function of the composite materials has also been confirmed.     

New ferromagnetic La3Co2TaO9 double perovskite: Structural and magnetic properties

The new double perovskite La₃Co₂TaO₉ has been prepared by a solid-state procedure. The crystal and magnetic structures have been studied from X-ray powder diffraction (XRPD) and neutron powder diffraction (NPD) data. Rietveld refinements were performed in the monoclinic space group P2₁/n. The structure consists of an ordered array of alternating B′O₆ and B″O₆ octahedra sharing corners, tilted along the three pseudocubic axes according to the Glazer notation a⁻b⁻c⁺. Rietveld refinements show that at RT the cell parameters are a=5.6005(7) Å, b=5.6931(7) Å, c=7.9429(9) Å and β=89.9539(7)°, and the refined crystallographic formula of this “double perovskite” can be written as La₂(Co)_2d(Co_1/3Ta_2/3)_2cO₆. Magnetization measurements and low-temperature NPD data show that the perovskite is a ferromagnet with T_C=72 K. At high T it follows the Curie–Weiss law with an effective magnetic moment of 3.82μ_B per Co ion which is very close to spin only Co²⁺ (HS).     

Dopant distribution, oxygen stoichiometry and magnetism of nanoscale Sn0.99Co0.01O2

In recent work, we have shown that chemically synthesized Sn_1−xCo_xO₂ nanoscale powders with x≤0.01 are ferromagnetic at room temperature when prepared by annealing the reaction precipitate in the narrow temperature window of 350-600 ^°C. Combined high resolution x-ray photoelectron spectroscopy (on as-prepared and Ar⁺ ion sputtered samples), x-ray diffraction and magnetometry measurements showed that the Co distribution is more uniform throughout the individual Sn_0.99Co_0.01O₂ particles when prepared at lower annealing temperatures of 350-600 ^°C and this uniform dopant distribution is essential to produce stable high temperature ferromagnetism. However, surface segregation of the dopant atoms in samples annealed at >600 ^°C destroys the room-temperature ferromagnetic behavior and reduces the Curie temperature to <300 K.     

Organic acid assisted solid-state synthesis of Li1.2Ni0.16Co0.08Mn0.56O2 nanoparticles as lithium ion battery cathodes

Lithium-rich layered oxide Li_1.2Ni_0.16Co_0.08Mn_0.56O₂ can be referred as a crystalline mixture of Li₂MnO₃ and LiNi_0.4Co_0.2Mn_0.4O₂ at equal molar ratio. In the paper, the solid state reaction of M(AC)₂·4H₂O (M = Mn, Co and Ni) and LiOH·H₂O has been performed to obtain nanocrystalline Li_1.2Ni_0.16Co_0.08Mn_0.56O₂ using a small molecular organic acid (i.e., oxalic acid (OA), citric acid (CA) or tartaric acid (TA)) as additive. The introduction of organic acids can help to improve the layered structure and inhibit the particle growth of Li_1.2Ni_0.16Co_0.08Mn_0.56O₂, and the different organic acids exert distinct influences on the structural and electrochemical properties of Li_1.2Ni_0.16Co_0.08Mn_0.56O₂. In detail, the nanoparticles obtained in the presence of OA have the smallest average size of 50–150 nm, which correspondingly exhibit the highest initial discharge capacity of 267.52 mAh g⁻¹ at 0.1C and the best high-rate capability (e.g., 152.22 mAh g⁻¹, 5C) when applied as a lithium ion battery cathode. Furthermore, the active substance obtained from TA shows the best cycling stability and a discharge capacity of 202.42 mAh g⁻¹ can be retained after 50 cycles at 0.5C.     

ZnO-Fe3O4 composite prepared by sol-gel method with H2 deoxidation

Fe doped ZnO powder samples (Fe/Zn=0.05 and 0.1) were prepared by sol-gel method with H₂ deoxidation at 450 ^°C for several hours or just heated in air at the same temperature. It was showed by vibrating sample magnetometer (VSM) that samples heat treated in H₂ could show strong ferromagnetism at room temperature while samples treated in air only show very weak magnetism. XRD using Co kα X-ray revealed that the samples heated in H₂ were not pure phase but like a granular system and the magnetism mainly results from Fe₃O₄ in samples while samples heated in air showed pure ZnO phase. Our work indicated that H₂ deoxidation treatment may be an effective technique to fabricate such magnetic semiconductor-like materials with Curie temperature higher than room temperature.     

Effect of Co or Mn addition on the soft magnetic properties of amorphous Fe89−xZr11Bx (x=5, 10) alloy ribbons

The temperature and field dependent magnetic properties of melt-spun amorphous Fe_89−x−yZr₁₁B_x(Co,Mn)_y (x=5, 10 and 0≤y≤10) alloys in the temperature range 5-1200 K are reported. The Curie temperature and saturation magnetization at room temperature increase (decrease) almost linearly with Co (Mn) addition. With increasing Co concentration, the room temperature coercivity increases at the rate of 2.26 (0.28) A/m per at% for the x=5 (10) samples. The high-field magnetic susceptibility and local magnetic anisotropy decrease (increases) rapidly with increasing Co (Mn) concentration. The thermomagnetic curves show a marked increase in magnetization above 850 K corresponding to the crystallization of α-FeCo (α-Fe) phase in samples containing Co (Mn). The Curie temperature of the crystalline phase increases (remains same) with increasing Co (Mn) concentration with the formation of α-FeCo (α-Fe). Addition of Co up to 10 at% in Fe-Zr-B improves the room temperature saturation magnetization from 0.56 to 1.2 T, and Curie temperature from 315 to 476 K. Also, the coercivity increases with Co addition from 1.27 to 23.88 A/m for x=5 and from 7.64 to 10.35 A/m for x=10 alloy. The non-collinear spin structures that characterize Fe rich Fe-Zr-B amorphous alloys have been used to describe the observed results.     

A Mössbauer study of some new compounds with the Fe-Me [Me=Mo,Ni, Cu,Co, Hg,Zn, Cd,Mn, Fe] bond

The reaction of trans-(Co)₃Fe(PPh₂Py)₂ with MeXn gave nine new compounds of trans-(CO)₃Fe(PPh₂Py)₂MeXn (MeXn=Co(SCN)₂, Ni(SCN)₂, Fe(SCN)₃, Cd(SCN)₂, Mn(SCN)₂, Zn(SCN)₂, Mo(CO)₃, Hg(SCN)₂ and CuBr). The compositions of the compounds were determined through elemental analysis. The structural determination was made by IR, FD-MS and³¹P-NMR. Mössbauer spectra were taken at 78 K. The solid-state structure of the complex has been determined by a single-crystal X-ray diffraction study. The crystal data for trans-(CO)₃Fe(Ph₂PPy)₂Hg(SCN)₂ are:a=16.369(5) Å,b=13.754(3) Å,c=17.749(2) Å,r=108.95(2)°, monoclinic space group P21/n,Z= 4. The determination of ESCA demonstrated the change in the Fe value. In the present paper, the effect of the ligands on Fe-metal bonds is discussed.     

Magnetocaloric effect in the La0.8Ce0.2Fe11.4−xCoxSi1.6 compounds

The effects of substitution of Co for Fe on the magnetic and magnetocaloric properties of La_0.8Ce_0.2Fe_11.4−xCo_xSi_1.6 (0, 0.2, 0.4, 0.6, 0.8 and 1.0) compounds have been investigated. X-ray diffraction shows that all compounds crystallize in the NaZn₁₃-type structure. Magnetic measurements show that the Curie temperature (T_C) can be tuned between 184 and 294 K by changing the Co content from 0 to 1. A field-induced methamagnetic transition occurs in samples with x=0, 0.2 and 0.4. The magnetic entropy changes of the compounds have been determined from the isothermal magnetization measurements by using the Maxwell relation.     

A structural, magnetostrictive and M?ssbauer study of Tb0.3Dy0.7(Fe0.9 T 0.1)1.95 alloys

The effect of IIIA metal and transition metalT substitution for Fe on crystal structure, magnetostriction and spontaneous magnetostriction, anisotropy and spin reorientation of a series of polycrystalline Tb_0.3 Dy_0.7 (Fe_0.9 T _0.1)_1.95 (T=Mn, Fe, Co, B, Al, Ga) alloys at room temperature were investigated systematically. It was found that the primary phase of the Tb_0.3 Dy_0.7 (Fe_0.9 T _0.1)_1.95 alloys is the MgCu₂-type cubic Laves phase structure for different substitution. The magnetostriction λ{ins} decrases greatly for the substitution of IIIA metal, B, Al and Ga, but is saturated more easily for Al and Ga substitution, showing that the Al and Ga substitution is beneficial to a decrease in the magnetocrystalline anisotropy of Tb_0.3 Dy_0.7 (Fe_0.9 T _0.1)_1.95 alloys. However, the substitution of transition metal Mn and Co decreases slightly the magnetostriction λ{ins}. It was also found that the effect of different substitutions on the spontaneous magnetostriction λ{in111} is distinct. The analysis of the M?ssbauer spectra indicates that the easy magnetization direction in the {110} plane deviates slightly from the main axis of symmetry for Al and Ga substitution, namely spin reorientation, but it does not change evidently for B, Mn and Co substitution.     

Micro‐Raman investigation of transition‐metal‐doped ZnO nanoparticles

We measured the Raman spectra of ZnO nanoparticles (ZnO‐NPs), as well as transition‐metal‐doped (5% Mn(II), Fe(II) or Co(II)) ZnO nanoparticles, with an average size of 9 nm. A typical Raman peak at 436 cm⁻¹ is observed in the ZnO‐NPs, whereas Zn_1−xMn_xO, Zn_1−xFe_xO and Zn_1−xCo_xO presented characteristic peaks at 661, 665 and 675 cm⁻¹, respectively. These peaks can be related to the formation of Mn₃O₄, Fe₃O₄ and Co₃O₄ species in the doped ZnO‐NPs. Moreover, these samples were analyzed at various laser powers. Here, we observed new vibrational modes (512, 571 and 528 cm⁻¹), which are specific to Mn, Fe and Co dopants, respectively, and ZnO‐NPs did not reveal any additional modes. The new peaks were interpreted either as disorder activated phonon modes or as local vibrations of Mn‐, Fe‐ and Co‐related complexes in ZnO. Copyright © 2007 John Wiley & Sons, Ltd.     

Crystal structure and magnetic ordering of manganites La0.7Ca0.3Mn1 ? y Fe y O3

The influence of the replacement of Mn ions in the La_0.7Ca_0.3Mn_{1 − y} Fe _y O₃ compounds (0 ≤ y ≤ 0.09) by another transitional metal, Fe, was studied. The radii of both ions are almost identical, which makes the effect of the transitional metal on the physical properties of manganites more transparent. The crystal structure of three samples (with y = 0, 0.03, 0.09) is studied in the temperature range T = 1.5–300 K by neutron powder diffraction. All investigated samples belong to the orthorhombic space group Pnma (62). It is confirmed that Fe ions occupy the Mn positions in the unit cell. As the Fe concentration increases, the saturation value of the spontaneous magnetic moment and the Curie temperature decrease, but the ground state remains ferromagnetic for 0 ≤ y ≤ 0.1. The saturation values of the magnetic moments at T = 1.5 K are m _FM = 3.72(3), 3.40(3), and 3.27(3) μ _B /Mn for the samples with an Fe concentration y = 0, 0.03, and 0.09, respectively. Original Russian Text ? A.I. Kurbakov, V.S. Zakhvalinskii, R. Laiho, 2007, published in Fizika Tverdogo Tela, 2007, Vol. 49, No. 4, pp. 691–695.     

Size-dependent oxidation of Pdn (n 13) on alumina/NiAl(110): Correlation with Pd core level binding energies

Small Pd clusters Pd_n (n = 1, 4, 7, 10, 13) deposited on alumina/NiAl(110) at room temperature were examined by X-ray photoelectron spectroscopy (XPS), as-deposited and after exposure to O₂ at temperatures ranging from 100 to 500 K. After O₂ exposure at 100 K, the Pd clusters showed XPS shifts indicative of oxidation. The exception was Pd₄, which did not oxidize under any conditions. The inertness of Pd₄/alumina/NiAl(110) appears to be correlated with a significantly higher-than-expected Pd 3d binding energy, which we attribute to a particularly stable valence shell. None of the clusters examined oxidized during O₂ exposures at 300 K or above, but He⁺ scattering showed that oxygen was bound on the cluster surfaces. Upon heating, all the oxygen associated with these small clusters appeared to spill over and react with the alumina/NiAl(110) support.     

Thermal diffusivity of double perovskite Sr2MMoO6 (M=Fe, Mn and Co) and La doping effects studied by mirage effect

The thermal diffusivity has been investigated in double perovskite Sr₂MMoO₆ (M=Fe, Mn and Co) by means of the mirage effect. We have found that the thermal diffusivity of metallic Sr₂FeMoO₆ is 0.39 cm²/s, which is larger than that (0.33 cm²/s) of insulating Sr₂MnMoO₆ and Sr₂CoMoO₆. We further investigate the substitution effects of the La³⁺ ions for the Sr²⁺ ions in Sr₂FeMoO₆ and Sr₂MnMoO₆, and have found that the thermal diffusivities of both samples significantly increase with the La concentration. Such an enhancement of the thermal diffusivities has been ascribed to occupation of the extra itinerant electrons on the conduction Mo4d band.     

Tb0.3Dy0.7(Fe0.9T0.1)1.95合金的结构、自旋重取向和穆斯堡尔谱

系统研究了室温下Tb_0.3Dy_0.7(Fe_0.9T_0.1)_1.95(过渡金属元素T=Mn，Fe，Co，B，Al，Ga)合金中ⅢA族金属和过渡金属元素T替代Fe对结构、自旋重取向和穆斯堡尔谱的影响.结果发现，不同金属T替代Fe，Tb_0.3Dy_0.7(Fe_0.9T_0.1)_1.95，合金具有相同的MgCu₂型立方Laves相结构；Al，Ga替代使Tb_0.3Dy_0.7(Fe_0.9T_0.1)_1.95合金的易磁化方向在{110}面逐渐偏离了立方晶体的主对称轴，即自旋重取向，B，Mn，Co替代未使易磁化轴发生明显转动；Al，Ga元素替代使超精细场H_hf略有下降，B，Mn替代对超精细场H_hf的影响不大，而Co元素替代使超精细场H_hf有较大增加；所有元素替代使同质异能移IS有所增加；B，Al，Ga和Mn替代使四极劈裂Q_s增加，而Co替代使四极劈裂Q_s下降. 关键词： 立方Laves相 自旋重取向 穆斯堡尔谱     

High-resolution infrared study of the 2ν3 (A1, E) and ν1 + ν3 (E) bands of NF3

The 2ν₃ overtone (A₁, E) and the ν₁ + ν₃ (E) combination bands of the oblate symmetric top ¹⁴NF₃ were studied by FTIR spectroscopy with a resolution of 2.5 × 10⁻³ cm⁻¹. Nearly 500 lines up to K_max/J_max = 30/43 were observed for the weak A₁ component reaching the v₃ = 2⁰ substate (1803.1302 cm⁻¹), the majority of which corresponded to reinforced K = 3p-type transitions. For the strong E component reaching the v₃ = 2^±2 substate (1810.4239 cm⁻¹), about 3550 transitions were assigned up to K_max/J_max = 65/69, favoring a clear observation of the ℓ(4, −2) and ℓ(4, 4) splittings within the kℓ = −2 and +4 sublevels, respectively. The two v₃ = 2 substates are linked by the ℓ(2, 2)- and ℓ(2, −1)-type interactions, providing severe crossings, respectively, at K′ = 6 and near K′ = 24 on the v₃ = 2⁺² side. A model working in the D-reduction and including all these ℓ-type interactions could reproduce together 3695 nonzero weighted experimental data (NZW) through 33 free parameters with a standard deviation of σ = 0.357 × 10⁻³  cm⁻¹. As for the ν₁ + ν₃ (E) combination band, about 3690 lines were assigned up to K_max/J_max = 45/55. Its v₁ = v₃ = 1 upper state (1931.577 5 cm⁻¹) was treated using the same model recently applied to the v₃ = 1 (E, 907.5413 cm⁻¹) state. It yielded 21 free parameters through 3282 NZW experimental data, adjusted with σ = 0.344 × 10⁻³  cm⁻¹ in the D-reduction. For the two excited states, the small and unobserved ℓ(0, 6) interaction was tested as useless. To confirm the adequacy of the vibrationally isolated models used, some other reductions of the Hamiltonian were tried. For the v₃ = 2 state, the D-, L-, and LD-reductions led to similar σ’s, while the Q one was not successful. For the v₁ = v₃ = 1 state, the D- and Q-reductions gave comparable σ’s, while the QD-reduction was not as good. The corresponding unitary equivalence relations are generally more nicely fulfilled for the v₃ = 2 state than for the v₁ = v₃ = 1 state. The three derivable anharmonicity constants in cm⁻¹ are x₃₃ = −4.1528, g₃₃ = +1.8235 and x₁₃ = −7.9652.     

Full-Heusler合金X2YGa(X=Co,Fe,Ni;Y=V,Cr,Mn)的电子结构、磁性及半金属特性的第一性原理研究

利用基于密度泛函理论的全势线性缀加平面波方法,结合广义梯度近似,对full-Heusler X₂YGa(X=Co,Fe,Ni;Y=V,Cr,Mn)合金的电子结构、磁性及半金属特性进行了研究,并讨论了自旋-轨道耦合作用对它们的影响.计算结果表明,自旋-轨道耦合作用对full-Heusler X₂YGa(X=Co,Fe,Ni;Y=V,Cr,Mn)合金的电子结构,磁性与半金属特性的影响很小. 当未考虑自旋-轨道耦合作用时,Co₂VGa,Co₂CrGa,和Fe₂CrGa合金为半金属或准半金属铁磁体,加入自旋-轨道耦合作用后体系的自旋极化率将降低1%左右, 它们依然保持很高的自旋极化率.Fe₂MnGa,Co₂MnGa,Ni₂CrGa和Ni₂MnGa合金为一般铁磁体,Fe₂VGa和Ni₂VGa合金为顺磁体. 关键词： 半金属特性 自旋-轨道耦合 Heusler合金 全势线性缀加平面波方法(FLAPW)     

Photoluminescence properties of Eu and Mn-activated BaMgP2O7 as a potential red phosphor for white-emission

A phosphate compound, BaMgP₂O₇ was co-doped with Eu²⁺ and Mn²⁺ for making a red-emitting phosphor. The phosphor was prepared by a solid-state reaction at high temperature. The photoluminescence properties were investigated under ultraviolet (UV) ray excitation. From a powder X-ray diffraction (XRD) analysis, the formation of single-phased BaMgP₂O₇ with a monoclinic structure was confirmed. In the photoluminescence spectra, the BaMgP₂O₇:Eu,Mn phosphor emits two distinctive colors: a blue band centered at 409 nm originating from Eu²⁺ and a red band at 615 nm caused by Mn²⁺. Also, efficient energy transfer from Eu²⁺ to Mn²⁺ in the BaMgP₂O₇:Eu,Mn system was verified by observing that the excitation spectra of BaMgP₂O₇:Eu,Mn emitted at 409 and 615 nm by Eu²⁺ emission and Mn²⁺ emission, respectively, are almost the same as that of BaMgP₂O₇:Eu monitored at 409 nm. The optimum concentration of Eu²⁺ ions in BaMgP₂O₇:0.015Eu excited at 309 nm wavelength is 1.5 mol%. With an increase of Mn²⁺ content up to 17.5 mol%, a systematic decline in the intensity of the excitation spectrum by Eu²⁺ and a gradual growth in the intensity of emission band by Mn²⁺ were observed. Accordingly, the optimum concentration of Mn²⁺ in BaMgP₂O₇:0.015Eu,Mn is 17.5 mol%. The maximum spectral overlap between emission of Eu²⁺ and excitation of Mn²⁺ is achieved in a composition of BaMgP₂O₇:0.015Eu,0.175Mn, resulting in considerable red-emission at 615 nm.     

Effect of substitution elements on magnetization of monodispersed MFe2O4 particles

The monodispersed hydrophilic magnetic fluids with nanometric M_xFe_3−xO₄ (M = Cu, Co, Ca and Ni) particles were prepared by sonochemical method. The substituted M amounts were analyzed with different x values by ICP-AES quantitatively. The excellent substitutability and magnetic property for Co, Ni was observed compared to those for Cu and Ca relatively. In particular, the applicability of Co was confirmed for novel radiotherapy.