Second-derivative synchronous fluorescence spectroscopy for the simultaneous determination of cinnarizine and nicergoline in pharmaceutical preparations

A rapid, simple, and highly sensitive second-derivative synchronous fluorometric method has been developed for the simultaneous analysis of binary mixtures of cinnarizine (CN) and nicergoline (NIC). The method is based upon measurement of the native fluorescence of these drugs at constant wavelength difference (Deltalambda) = 80 nm in aqueous methanol (50%, v/v). The different experimental parameters affecting the native fluorescence of the studied drugs were carefully studied and optimized. The fluorescence-concentration plots were rectilinear over the range of 0.025-1.5 and 0.25-5.5 microg/mL for CN and NIC, respectively, with lower detection limits of 0.58 and 0.82 ng/mL and quantitation limits of 1.93 and 2.73 ng/mL for CN and NIC, respectively. The proposed method was successfully applied for the determination of the studied compounds in synthetic mixtures and in commercial tablets. The results obtained were in good agreement with those obtained with reference methods. The high sensitivity attained by the proposed method allowed the determination of CN in real and spiked human plasma. The mean recovery in the case of spiked human plasma [number of trials (n) = 3] was 102.82 +/- 2.17%, while that in real human plasma (n = 3) was 105.25 +/- 2.05.     

Spectrofluorometric determination of verapamil hydrochloride in pharmaceutical preparations and human plasma using organized media: application to stability studies

A highly sensitive spectrofluorometric method was developed for the determination of verapamil hydrochloride (VP HCl) in pharmaceutical formulations and biological fluids. The proposed method is based on investigation of the fluorescence spectral behavior of VP HCl in micellar systems, such as sodium dodecyl sulfate (SDS) and beta-cyclodextrin (beta-CD). In aqueous solutions of borate buffer of pH 9 and 8.5, VP HCI was well incorporated into SDS and beta-CD, respectively, with enhancement of its native fluorescence. The fluorescence was measured at 318 nm after excitation at 231 nm. The fluorescence intensity enhancements were 183 and 107% in SDS and in beta-CD, respectively. The fluorescence-concentration plots were rectilinear over the range of 0.02-0.2 and 0.02-0.25 microg/mL, with lower detection limits of 5.58 x 10(-3) and 3.62 x 10(-3) microg/mL in SDS and beta-CD, respectively. The method was successfully applied to the analysis of commercial tablets and the results were in good agreement with those obtained with the official method. The method was further applied to the determination of VP HCl in real and spiked human plasma. The mean % recoveries in the case of spiked human plasma (n=4) was 92.59 +/- 3.11 and 88.35 +/- 2.55 using SDS and beta-CD, respectively, while that in real human plasma (n=3) was 90.17 +/- 6.93 and 89.17 +/- 6.50 using SDS and beta-CD, respectively. The application of the method was extended to the stability studies of VP HCl after exposure to ultraviolet radiation and upon oxidation with hydrogen peroxide.     

Spectrofluorimetric determination of vigabatrin and gabapentin in dosage forms and spiked plasma samples through derivatization with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole

A highly sensitive and specific method is proposed for the determination of vigabatrin (I) and gabapentin (II) in their dosage forms and spiked human plasma. The method is based on coupling the drugs with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole in borate buffer at pH 7.1 and measuring the resulting fluorescence at 532 nm after excitation at 465 nm. The fluorescence intensity was a linear function of the concentration of the drugs over the ranges of 1.3-6.5 and 1.7-8.5 microg/mL for I and II, respectively. Minimum detectability values were 0.54 microg/mL (4.2 x 10(-6)M) and 0.97 microg/mL (5.7 x 10(-6)M) for I and II, respectively, under the described conditions. The proposed method was successfully applied to the determination of the 2 drugs in their dosage forms, and the percent recoveries +/- standard deviation (SD) were 104.53 +/- 1.2 and 100.00 +/- 1.32 of the label claim for I and II, respectively. The method was further applied to the determination of vigabatrin in spiked plasma samples. The percent recovery +/- SD was 101.58 +/- 2.68. Interference from endogenous alpha-amino acids was overcome through selective complexation with freshly prepared Cu(OH)2. The interference likely to be encountered from co-administered drugs, such as carbamazepine, cimetidine, clonazepam, clopazam, phenobarbital, valproic acid, and lamotrigine, was also studied. A reaction pathway is suggested.     

Spectrofluorometric determination of citalopram in pharmaceutical preparations and spiked human plasma using organized media

The native fluorescence of citalopram (CIT) was obtained in citrate buffer of pH 6.5 with and without beta-cyclodextrin (beta-CD) or sodium dodecyl sulfate (SDS) as fluorescence enhancers at 305 nm using 242 nm for excitation. Micellar systems of ionic and nonionic surfactants were investigated by measuring the fluorescence intensity of the analyte-surfactant system. In slightly acidic aqueous solution of pH 6.5, CIT was better incorporated in CDs and SDS micelles. The luminescence emission from CIT was found to be greatly enhanced by SDS micelles. The fluorescence intensity enhancements in CDs medium and in SDS as ionic surfactant relative to slightly acidic aqueous solution were 125 and 250%, respectively. Organized media-enhanced spectroflourometric methods were developed for the determination of CIT, in pure form as well as in pharmaceutical preparations. The fluorescence intensity-concentration plots were rectilinear over the ranges 0.06 to 0.64, 0.04 to 0.40, and 0.02 to 0.26 microg/mL with lower detection limits of 0.02, 0.01, and 0.007 microg/mL, either in citrate buffer only or in beta-CD and SDS as organized media, respectively. Furthermore, the high sensitivity attained by using SDS as organized medium allowed in vitro spectrofluorometric determination of CIT in spiked human plasma. Interference from endogenous amino acids has been overcome by using the solid-phase extraction technique; the mean recovery (n = 5) was 100.1+/-0.8%     

Liquid chromatographic method for the simultaneous determination of eprosartan and hydrochlorothiazide in tablets and human plasma

A new, specific, and sensitive RP-HPLC method was developed for the simultaneous determination of eprosartan (EPR) and hydrochlorothiazide (HCT). Good chromatographic separation was achieved using a 250 x 4.6 mm id, 5 microm particle size Symmetry C18 column. The mobile phase acetonitrile-0.1 M phosphate buffer (35+65, v/v), pH 4.5, was pumped at a flow rate of 1 mL/min, with UV detection at 275 nm. The method showed good linearity in the ranges of 0.5-50 and 0.1-10 microg/mL, with LOD of 0.06 and 0.02 microg/mL and LOQ of 0.20 and 0.08 microg/mL for EPR and HCT, respectively. The proposed method was successfully applied for the analysis of the studied drugs in their synthetic mixture and co-formulated tablets. The method was further extended to the in vitro and in vivo determination of the two drugs in spiked and real human plasma. Interference likely to be encountered from the co-administered drugs was studied.     

Micellar enhanced spectrofluorometric determination of labetalol through complexation with aluminium(III): application to dosage forms and biological fluids

Two simple, sensitive, and specific spectrofluorometric procedures have been developed for the determination of labetalol (LBT) in pharmaceuticals and biological fluids. LBT was found to react with Al3+, both in acetate buffer of pH 4.5 (Procedure I) and borate buffer of pH 8.0 (Procedure II), to produce highly fluorescent stable complexes. The fluorescence intensity could be enhanced by the addition of sodium dodecyl sulfate, resulting in 3.5- and 2.7-fold increases in the fluorescence intensity for Procedures I and II, respectively. In both procedures, the fluorescence intensity was measured at 408 nm after excitation at 320 nm. The different experimental parameters affecting the development and stability of the fluorescent products were carefully studied and optimized. The fluorescence intensity-concentration plots were rectilinear over the range of 0.02-0.1 and 0.01-0.05 microg/mL with a detection limit of 0.003 and 0.001 microg/mL for Procedures I and II, respectively. The proposed method was successfully applied to commercial tablets containing LBT. The results were in good agreement with those obtained using a reference spectrofluorometric method. Furthermore, the method was applied for the determination of LBT in spiked human plasma, and the recovery (n = 4) was 93.30 +/- 2.62%. A proposal of the reaction pathway was postulated for Procedures I and II, respectively.     

Voltammetric determination of benazepril and ramipril in dosage forms and biological fluids through nitrosation

A simple and highly sensitive voltammetric method was developed for the determination of benazepril (I) and ramipril (II). The compounds were treated with nitrous acid, and the cathodic current produced by the resulting nitroso derivatives was measured. The voltammetric behavior was studied by adopting direct current (DCt), differential pulse (DPP), and alternating current (ACt) polarography. Both compounds produced well-defined, diffusion-controlled cathodic waves over the whole pH range in Britton-Robinson buffers (BRb). At pH 3 and 5, the values of diffusion-current constants (Id), were 5.90 +/- 0.40 and 6.66 +/- 0.61 for I and II, respectively. The current concentration plots for I were rectilinear over the range of 1.5-40 and 0.1-30 microg/mL in the DCt and DPP modes, respectively; for II, the range was 2-30 and 0.1-20 microg/mL in the DCt and DPP modes, respectively. The minimum detectabilities (S/N = 2) were 0.015 microg/mL (about 3.25 x 10(-8)M) and 0.012 microg/mL (about 2.88 x 10(-8)M) for I and II, respectively, adopting the DPP mode. Results obtained for the proposed method when applied to the determination of both compounds in dosage forms were in good agreement with those obtained using reference methods. Hydrochlorthiazide, which is frequently co-formulated with these drugs, did not interfere with the assay. The method was also applied to the determination of benazepril in spiked human urine and plasma. The percentage recoveries adopting the DPP mode were 96.2 +/- 1.21 and 95.7 +/- 1.61, respectively.     

Spectrofluorimetric determination of paroxetine hydrochloride in its formulations and human plasma

A sensitive spectrofluorimetric procedure for the determination of paroxetine-HCl in pharmaceutical formulations and human plasma has been described. The native fluorescence of the drug has been studied under different conditions. Maximum fluorescence intensity was obtained in methanol at 340 nm using 290 nm for excitation. Different surfactants showed negative effect on the fluorescence intensity of paroxetine-HCl. Regression analysis of Beer's plot showed good correlation (r=0.9999) between fluorescence intensity and concentration over the range of 0.05-0.40 microg ml-1 with lower limit of detection (LOD) of 0.015 microg ml-1. The drug was successfully determined in its tablets with average % recovery of 98.00+/-0.99% which was in accordance with those given by a compendial method. The method was also applied to the determination of paroxetine-HCl in spiked human plasma with average recovery of 77.70+/-1.06%.     

Spectrophotometric determination of acyclovir and ribavirin in their dosage forms

Two simple, accurate, and reliable spectrophotometric methods have been developed for the determination of 2 antiviral drugs, acyclovir (ACV) and ribavirin (RBV), in their pharmaceutical formulations. These methods are based on oxidation of the 2 drugs with either cerium (IV) ammonium sulfate (Method A) or potassium persulfate (Method B). The products of oxidation in both methods are coupled with 3-methylbenzothiazolin 2-one hydrazone, producing a deep blue color with a maximum absorption wavelength at 630 nm. In Method A, the absorbance-concentration plots were linear over the ranges of 5-50 and 10-60 microg/mL with detection limits of 0.18 microg/mL (8 x 10(-7) M) and 0.63 microg/mL (2.58 x 10(-6) M) for ACV and RBV, respectively. In Method B, the ranges were 5-45 and 20-50 microg/mL with detection limits of 0.11 microg/mL (4.88 x 10(-7) M) and 1.40 microg/mL (5.73 x 10(-6) M) for the 2 drugs, respectively. The molar absorptivities were 4.1 x 10(3) and 3.65 x 10(3) L/mol/cm in Method A and 5.03 x 10(3) and 3.97 x 10(3) L/mol/cm in Method B for the 2 drugs, respectively. The proposed methods were applied successfully for the determination of the 2 drugs in their pharmaceutical formulations. The percentage recoveries +/- standard deviation were 99.57 +/- 0.86 and 100.82 +/- 0.46 for ACV; 99.41 +/- 1.08 and 100.35 +/- 1.03 for RBV. The results obtained were compared statistically with those given by official methods and showed no significant differences regarding accuracy and precision.     

Synchronous fluorescence spectrofluorimetric method for the simultaneous determination of metoprolol and felodipine in combined pharmaceutical preparation

A rapid, simple and sensitive synchronous specrtofluorimetric method has been developed for the simultaneous analysis of binary mixture of metoprolol (MTP) and felodipine (FDP). The method is based upon measurement of the synchronous fluorescence intensity of the two drugs at Δλ of 70 nm in aqueous solution. The different experimental parameters affecting the synchronous fluorescence intensities of the two drugs were carefully studied and optimized. The fluorescence intensity-concentration plots were rectilinear over the ranges of 0.5-10 μg/mL and 0.2-2 μg/mL for MTP and FDP, respectively. The limits of detection were 0.11 and 0.02 μg/mL and quantification limits were 0.32 and 0.06 μg/mL for MTP and FDP, respectively. The proposed method was successfully applied for the determination of the two compounds in their commercial tablets and the results obtained were favorably compared to those obtained with a comparison method.     

Determination and pharmacokinetic study of syringin and chlorogenic acid in rat plasma after administration of Aidi lyophilizer

A high-performance liquid chromatographic (HPLC) method was developed for the first time to simultaneously quantify syringin and chlorogenic acid in rat plasma using wavelength-transfer technology. The analysis was performed on a Diamonsil C(18) column (200 x 4.6 mm i.d., 5 microm particle size) with isocratic mobile phase consisting of acetonitrile-0.05% phosphoric acid (12:88, v/v). The linear ranges were 0.20-10 and 0.25-30 microg/mL, respectively. The lower limits of quantification were 0.20 and 0.25 microg/mL, respectively. The method was shown to be reproducible and reliable with intraday precision below 8.5 and 6.1%, interday precision below 7.1 and 5.5%, accuracy within +/-7.1 and +/-8.6%, and mean extraction recovery excess of 92.1 and 80.9%, respectively, which were all calculated from the blank plasma sample spiked with syringin and chlorogenic acid at three concentrations of 0.20, 1.0 and 6.0 microg/mL for syringin and 0.25, 2.0 and 20 microg/mL for chlorogenic acid. This method was validated for specificity, accuracy and precision and was successfully applied to the pharmacokinetic study of syringin and chlorogenic acid in rat plasma after intravenous administration of Aidi lyophilizer.     

Spectrofluorometric determination of fluvoxamine in dosage forms, spiked plasma, and real human plasma by derivatization with fluorescamine

A sensitive, simple, and selective spectrofluorometric method was developed for the determination of fluvoxamine (FXM) in pharmaceutical formulations and biological fluids. The method is based upon the reaction between the drug and fluorescamine in borate buffer of pH 8.0 to yield a highly fluorescent derivative that is measured at 481 nm after excitation at 383 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The method was applied for the determination of the drug over the concentration range of 0.1-1.1 microg/mL with a detection limit of 0.01 microg/mL (2 x 10(-8) M). The proposed method was successfully applied to the analysis of commercial tablets. The results obtained were in good agreement with those obtained using a reported spectrophotometric method. The method was applied for the determination of FXM in spiked human plasma with recovery (n=4) of 97.32 +/- 1.23%, while that in real human plasma (n=3) was 90.79 +/- 2.73%. A proposal for the reaction pathway is presented.     

Spectrofluorimetric determination of drugs containing active methylene group using N1-methyl nicotinamide chloride as a fluorigenic agent

A spectrofluorimetric method was described for the determination of drugs containing active methylene groups adjacent to carbonyl groups. The method was applied successfully to the determination of three life saving cardiovascular drugs, with narrow therapeutic indices: pentoxifylline (I), propafenone hydrochloride (II) and acebutolol hydrochloride (III), in laboratory-prepared mixtures, in commercial tablets and in plasma samples. The method involved the reaction of each of the tested drugs with N1-methyl nicotinamide chloride (NMNCl) in the presence of alkali, followed by addition of formic acid, where highly fluorescent reaction products were produced. The produced fluorescence were measured quantitatively at 472 nm (lambdaex 352 nm), 409 nm (lambdaex 310 nm) and 451 nm (lambdaex 266 nm) for (I), (II), and (III) respectively. The method was linear over concentration ranges of 10-1000 microg/ml , 0.2-12 microg/ml and 0.08-10 microg/ml in standard solutions for (I), (II), and (III) respectively. In spiked human plasma samples, calibration graphs were linear over concentration ranges of 20-1000 microg/ml, 0.2-15 microg/ml and 0.08-10 microg/ml for (I), (II), and (III) respectively. The method showed good accuracy, specificity and precision in both laboratory-prepared mixtures and spiked human plasma samples. The proposed method is simple, with low instrumentation requirements, suitable for quality control application, bioavailability and bioequivalency studies.     

Spectrophotometric determination of four macrolide antibiotics in pharmaceutical formulations and biological fluids via binary complex formation with eosin [corrected

A simple, rapid, and sensitive validated spectrophotometric method was developed for the determination of certain macrolide antibiotics namely, erythromycin (I), azithromycin dihydrate (II), clarithromycin (III), and roxithromycin (IV) in bulk powders, pharmaceutical formulations, and spiked biological fluids. The proposed method is based on the formation of a binary complex between each of the studied drugs and eosin Y in aqueous buffered medium. Under the optimum conditions, the binary complexes showed absorption maxima at 542-544 nm. The absorbance of the binary complexes obeyed Beer's law over the concentration range of 1-10 micro/g/mL for II, 2-20 microg/mL for I and IV, and 3-30 microg/mL for III. The mean percentage recoveries were 100.04 +/- 0.83, 99.98 +/- 0.80, 100.17 +/- 0.91, and 99.55 +/- 0.91, with minimum detectable molarities of 2 x 10(-7) for I and II, 4 x 10(-7) for III, and 3 x 10(-7) for IV. The different experimental parameters affecting the development and stability of the colors were studied and optimized. The proposed method was successfully applied to the analysis of the cited drugs in some pharmaceutical formulations. The results obtained were in good agreement with those obtained using the reference methods. The proposed method was further applied to spiked human urine and plasma. A proposal of the reaction pathway is suggested.     

Stability-indicating methods for determination of tiapride in pure form, pharmaceutical preparation, and human plasma

Four different stability-indicating procedures are described for determination of tiapride in pure form, dosage form, and human plasma. Second derivative (D2), first derivative of ratio spectra (1DD), spectrofluorimetric, and high-performance column liquid chromatographic (LC) methods are proposed for determination of tiapride in presence of its acid-induced degradation products, namely 2-methoxy-5-(methylsulfonyl) benzoic acid and 2-diethylaminoethylamine. These approaches were successfully applied to quantify tiapride using the information included in the absorption, excitation, and emission spectra of the appropriate solutions. In the D2 method, Beer's law was obeyed in the concentration range of 1.5-9 microg/mL with a mean recovery of 99.94 +/- 1.38% at 253.4 nm using absolute ethanol as a solvent. In 1DD, which is based on the simultaneous use of the first derivative of ratio spectra and measurement at 245 nm in absolute ethanolic solution, Beer's law was obeyed over a concentration range of 1.5-9 microg/mL with mean recovery 99.64 +/- 1.08%. The spectrofluorimetric method is based on the determination of tiapride native fluorescence at 339 nm emission wavelength and 230 nm excitation wavelength using water-methanol (8 + 2, v/v). The calibration curve was linear over the range of 0.2-3 microg/mL with mean recovery of 99.66 +/- 1.46%. This method was also applied for determination of tiapride in human plasma. A reversed-phase LC method performed at ambient temperature was validated for determination of tiapride using methanol-deionized water-triethylamine (107 + 93 + 0.16, v/v/v) as the mobile phase. Sulpiride was used as an internal standard at a flow rate of 1 mL/min with ultraviolet detection at 214 nm. A linear relation was obtained over a concentration range of 2-30 microg/mL with mean recovery of 99.66 +/- 0.9%. Results were statistically analyzed and compared with those obtained by applying the reference method. They proved both accuracy and precision.     

Fluorescence enhancement method for the determination of nucleic acids using cationic cyanine as a fluorescence probe

A fluorescence enhancement method with a cationic cyanine as a probe was developed for the determination of nucleic acids. Under the experimental conditions, the fluorescence enhancement of cyanine (lambda(ex)/lambda(em)= 524/591.5 nm) was observed in the presence of DNA. The calibration graphs were linear over the range of 0.01-15 microg mL(-1) for both calf thymus DNA (CT DNA) and fish sperm DNA (FS DNA). The limits of detection were 0.005 and 0.007 microg mL(-1) for CT DNA and FS DNA, respectively. The method was applied to the determination of DNA in synthetic and real samples and satisfactory results were obtained. A possible fluorescence enhancement mechanism was also studied.     

HPLC with diode-array detection for the simultaneous determination of di(2-ethylhexyl)phthalate and mono(2-ethylhexyl)phthalate in seminal plasma

A high-performance liquid chromatographic method for the simultaneous determination of di(2-ethylhexyl)phthalate (DEHP) and its major metabolite mono(2-ethylhexyl)phthalate (MEHP) in seminal plasma was developed and validated. The method involves liquid-liquid extraction followed by isocratic reversed-phase chromatography with diode-array detection. The recovery, selectivity, linearity, precision and accuracy of the method were evaluated from the analysis of spiked seminal plasma samples. The effect of mobile-phase composition and pH on the retention of the target analytes was investigated. The limits of detection were 0.010 and 0.015 microg/mL, for DEHP and MEHP, respectively. This method was used to analyze real samples in support of clinical studies on these potential endocrine disruptors.     

A sensitive and selective RP-HPLC method for simultaneous determination of picroside-I and picroside-II in rat plasma and its application in pharmacokinetics studies

A sensitive and selective HPLC method with UV detection for the simultaneous determination of picroside-I and picroside-II (active components of total glycoside of Picrorhiza scrophulariiflora Pennell) was developed and validated in rat plasma. After simple deproteinization using acetonitrile, analysis was performed on an RP-C18 column (250 mm x 4.6 mm id, 5 microm) with a mobile phase consisting of acetonitrile and water at a flow rate of 1.0 mL/min used in a gradient elution program. The UV detection wavelength was set at 262 and 277 nm. Linear calibration curves were obtained in the concentration range of 0.10-50 microg/mL for picroside-I and 0.25-200 microg/mL for picroside-II. The lower limits of quantification were 0.1 and 0.25 microg/mL for picroside-I and picroside-II, respectively. The recoveries from spiked control samples were up to 80% for both picroside-I and picroside-II. Accuracy and precision of the validated method were both within the acceptable limits of <15% at three quality control concentrations. The analytes were stable after three freeze-thaw cycles. The method was successfully used to determine concentrations of picroside-I and picroside-II after intravenous administration of total glycoside of Picrorhiza scrophulariiflora Pennell to rats.     

A sensitive, rapid and specific determination of midazolam in human plasma and saliva by liquid chromatography/electrospray mass spectrometry

A rapid, sensitive and selective liquid chromatography/electrospray mass spectrometry (LC/ES-MS) method was developed for the quantitative determination of the anaesthetic benzodiazepine midazolam (MID) in human saliva and plasma from patients undergoing anesthesia procedures. Biological samples spiked with diazepam-d5, the internal standard, were extracted into diethyl ether. Compounds were separated on a Xterra RP18 column using a mobile phase of acetonitrile/formic acid 0.1% at a flow rate of 0.25 mL/min under a linear gradient. Column effluents were analyzed using MS with an ES source in the positive ionization mode. Calibration curves were linear in the concentration ranges of 1-250 and 0.2-25 ng/mL in plasma and saliva, respectively. The limits of detection were 0.5 ng/mL in plasma and 0.1 ng/mL in saliva, using a 0.5-mL sample volume. The recoveries of the spiked samples were above 65%. The method was applied to ten real samples from patients undergoing midazolam treatment.     

Determination of nucleic acids using fluorescence probe sensitized by microemulsion

Because the fluorescence of azur A can be quenched by adding nucleic acid, a sensitive fluorometric method for determination of nucleic acids at nanogram levels was established. Using optimal conditions, the calibration curves were linear in the range of 0-6.0 microg/mL for calf thymus deoxyribonucleic acid (ct DNA) and 0-7.0 microg/mL for herring sperm DNA (hs DNA). The limits of determination were 3.5 and 3.8 ng/mL, respectively, which shows the high sensitivity of this method. Triton X-100 microemulsion was applied as a sensitive media to enhance the sensitivity. The binding mode concerning the interactions of azur A with nucleic acids was also studied and the association constant with different binding numbers was obtained. The method has been applied to the determination of nucleic acid in both synthetic and real samples, such as cauliflower and pork liver, with satisfactory results.