以手性两亲小分子为模板剂制备介孔二氧化硅纳米空心球

以L-亮氨酸为手性源合成了手性阳离子两亲性小分子化合物L-18Leu6NEtBr,用其自组装体作为模板,氢氧化钠为催化剂,经溶胶-凝胶过程制备出介孔二氧化硅纳米空心球;分析了介孔二氧化硅纳米空心球的尺寸和孔径.结果表明,所制备的二氧化硅空心球直径约100nm;其介孔孔道平行于壳表面,孔径为3.1nm.     

Study of adsorption properties of synthesized mesoporous silica doped with dysprosium and modified with nickel

Mesoporous silica (MPS) modified with nickel and MPS doped with dysprosium and modified with nickel have been synthesized by the template method. The adsorbents are characterized by various techniques such as transmission electron microscopy, scanning electron microscopy, X-ray diffraction, inductively coupled plasma spectroscopy, and X-ray fluorescence analyses. The adsorption properties of the synthesized samples have been investigated by inverse gas chromatography. Furthermore, thermodynamic characteristics of the adsorption of test compound belonging to different classes of organic compounds were obtained. In addition, the contributions of the energy of specific interactions to the total adsorption energy were calculated. It is also shown that entropy plays the determining role in the adsorption of test compounds on synthesized mesoporous materials.     

Templated synthesis of electroactive periodic mesoporous organosilica bridged with oligoaniline

The synthesis and characterization of novel electroactive periodic mesoporous organosilica (PMO) are reported. The silsesquioxane precursor, N,N'-bis(4'-(3-triethoxysilylpropylureido)phenyl)-1,4-quinonene-diimine (TSUPQD), was prepared from the emeraldine base of amino-capped aniline trimer (EBAT) using a one-step coupling reaction and was used as an organic silicon source in the co-condensation with tetraethyl orthosilicate (TEOS) in proper ratios. By means of a hydrothermal sol-gel approach with the cationic surfactant cetyltrimethyl-ammonium bromide (CTAB) as the structure-directing template and acetone as the co-solvent for the dissolution of TSUPQD, a series of novel MCM-41 type siliceous materials (TSU-PMOs) were successfully prepared under mild alkaline conditions. The resultant mesoporous organosilica were characterized by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetry, X-ray diffraction, nitrogen sorption, and transmission electron microscopy (TEM) and showed that this series of TSU-PMOs exhibited hexagonally patterned mesostructures with pore diameters of 2.1-2.8 nm. Although the structural regularity and pore parameters gradually deteriorated with increasing loading of organic bridges, the electrochemical behavior of TSU-PMOs monitored by cyclic voltammetry demonstrated greater electroactivities for samples with higher concentration of the incorporated TSU units.     

Synthesis of mesoporous silicas inside large pores of inorganic matrix

Template syntheses of mesoporous silicas have been carried out inside large pores of inorganic matrix. Portions of tetraethoxysilane and cetyltrimethylammonium bromide micellar solution were incorporated step-by-step inside pore volume of silica gel with large pore size. Synthesized materials were characterized using thermal analysis, adsorption-desorption of nitrogen and X-ray diffraction scattering.     

Surface chemistry in the process of coating mesoporous SiO2 onto carbon nanotubes driven by the formation of Si-O-C bonds

The deposition of mesoporous silica (SiO(2)) on carbon nanotubes (CNTs) has opened up a wide range of assembling possibilities by exploiting the sidewall of CNTs and organosilane chemistry. The resulting systems may be suitable for applications in catalysis, energy conversion, environmental chemistry, and nanomedicine. However, to promote the condensation of silicon monomers on the nanotube without producing segregated particles, (OR)(4-x)SiO(x)(x-) units must undergo nucleophilic substitution by groups localized on the CNT sidewall during the transesterification reaction. In order to achieve this preferential attachment, we have deposited silica on oxidized carbon nanotubes (single-walled and multiwalled) in a sol-gel process that also involved the use of a soft template (cetyltrimethylammonium bromide, CTAB). In contrast to the simple approach normally used to describe the attachment of inorganic compounds on CNTs, SiO(2) nucleation on the tube is a result of nucleophilic attack mainly by hydroxyl radicals, localized in a very complex surface chemical environment, where various oxygenated groups are covalently bonded to the sidewall and carboxylated carbonaceous fragments (CCFs) are adsorbed on the tubes. Si-O-C covalent bond formation in the SiO(2)-CNT hybrids was observed even after removal of the CCFs with sodium hydroxide. By adding CTAB, and increasing the temperature, time, and initial amount of the catalyst (NH(4)OH) in the synthesis, the SiO(2) coating morphology could be changed from one of nanoparticles to mesoporous shells. Concomitantly, pore ordering was achieved by increasing the amount of CTAB. Furthermore, preferential attachment on the sidewall results mostly in CNTs with uncapped ends, having sites (carboxylic acids) that can be used for further localized reactions.     

以手性两亲小分子自组装体为模板制备介孔二氧化硅空心球

合成了手性阳离子型两亲性小分子化合物,利用圆二色谱分析了其在水中形成的自组装体的结构;以该化合物的自组装体为模板,在正丙醇和氨水的混合溶剂中制备得到了介孔二氧化硅空心球;利用扫描电镜、透射电镜、X射线衍射仪以及氮气吸附-脱附试验装置分析了二氧化硅空心球的形貌及孔结构.结果表明,两亲性小分子在水中形成的自组装体呈现手性堆积;合成的介孔二氧化硅空心球的直径约为600~800nm,壁厚约为100~150nm,其孔道垂直于球的表面,孔径约为3.0nm,比表面积约为306m2·g-1.正丙醇作为模板控制二氧化硅空心球的空腔尺寸和形貌,而两亲性小分子的自组装体作为模板控制放射状孔道的形貌和尺寸.     

Preparation of hollow mesoporous silica nanorods for encapsulating and slowly releasing eugenol

Fragrances are widely used in many aspects of our lives.They cannot only make people happy,but also treat many diseases.However,excessively fast evaporation rate is one of the main obstacles to the use of spices.In this study,mesoporous silica nanorods(MSNRs) and hollow mesoporous silica nanorods(HMSNRs) were prepared to encapsulate eugenol.These two nano-fragrances were named eugenol@MSNRs and eugenol@HMSNRs,respectively.The morphologies,size,interior structures and pore performances of MSNRs a...     

Preparation of hollow mesoporous silica nanorods for encapsulating and slowly releasing eugenol

Fragrances are widely used in many aspects of our lives. They cannot only make people happy, but also treat many diseases. However, excessively fast evaporation rate is one of the main obstacles to the use of spices. In this study, mesoporous silica nanorods (MSNRs) and hollow mesoporous silica nanorods (HMSNRs) were prepared to encapsulate eugenol. These two nano-fragrances were named eugenol@MSNRs and eugenol@HMSNRs, respectively. The morphologies, size, interior structures and pore performances of MSNRs and HMSNRs. Besides, the performances of encapsulation and fragrance release of eugenol@MSNRs and eugenol@HMSNRs were compared and analyzed. The results showed that eugenol@HMSNRs encapsulated more fragrance and were faster to encapsulate compared with eugenol@MSNRs. Both the release rates of eugenol from eugenol@MSNRs and eugenol@HMSNRs were slow. But the eugenol was released from eugenol@MSNRs more slowly.     

Mesoporous hybrid thin films: the physics and chemistry beneath

Mesoporous films containing organic or biological functions within an organised array of cavities are produced by combining sol-gel, self-assembly of supramolecular templates and surface chemistry. This paper reviews the essential physics and chemical concepts behind the synthesis of these complex multifunctional materials.