Ozonolysis of oleic acid adsorbed to polar and nonpolar aerosol particles

Single-particle kinetic studies of the reaction between oleic acid and O 3 have been conducted on two different types of core particles: polystyrene latex (PSL) and silica. Oleic acid was found to adsorb to both particle types in multilayer islands that resulted in an adsorbed layer of a total volume estimated to be less than one monolayer. The rate of the surface reaction between surface-adsorbed oleic acid and O 3 has been shown for the first time to be influenced by the composition of the aerosol substrate in a mixed organic/inorganic particle. A Langmuir-Hinshelwood mechanism was applied to the observed dependence of the pseudo-first-order rate constant with [O 3], and the resulting fit parameters for the ozone partition coefficient ( K O 3 ) and maximum first order rate constant ( k 1,max ) suggest that the reaction proceeded faster on the less polar PSL core at lower [O 3] due to the increased residence time of O 3 on the PSL surface, but the reaction was ultimately more efficient on the silica surface at high [O 3]. Values for the uptake coefficient, gamma oleic , for reaction of oleic acid on PSL spheres decrease from 2.5 x 10 (-5) to 1 x 10 (-5) with increasing [O 3] from 4 to 25 ppm and overlap at high [O 3] with the estimated values for gamma oleic on silica, which decrease from 1.6 x 10 (-5) to 1.3 x 10 (-5). The relationship between gamma oleic and the more common expression for gamma O 3 is discussed.     

Hindered coarsening of a phase-separating microemulsion due to dispersed colloidal particles

The addition of sterically stabilized colloidal particles to a phase-separating microemulsion leads to dramatic changes in its demixing behavior, especially during the later stages. Our microemulsion is composed of reverse micelles of sodium dodecyl sulfate, pentanol, and water in a dodecane continuous phase which separates into micelle-rich and micelle-poor phases above a lower critical solution temperature. The poly(methyl methacrylate) particles preferentially partition into the less structured, micelle-poor phase. Nucleation of the minority phase or spinodal decomposition close to criticality continue to occur in the presence of particles, albeit with pronounced pretransitional clustering of particles when the micelle-poor phase is in the minority. The coalescence of micelle-poor droplets and the coarsening of micelle-rich domains are both strongly modified due to the presence of colloidal particles. We use our observations of the early stages of phase separation to understand these late stage changes.     

Effects of trace water on charging of silica particles dispersed in a nonpolar medium

This paper presents an investigation of the effects of trace water on the charging of silica (SiO(2)) particles dispersed in a nonpolar medium. There are a growing number of applications that seek to use electrostatic effects in apolar media to control particle movement and aggregation stability in such systems. One factor that is often overlooked in the preparation of nonpolar colloidal dispersions is the amount of water that is introduced to the system by hygroscopic particles and surfactants. The amount and location of this water can have significant effects on the electrical properties of these systems. For nonpolar surfactant solutions it has been shown that water can affect the conductivity, and it has been speculated that this is due to swelling of the polar cores of inverse micelles, increasing the fraction of them that are charged. Some studies have suggested that particle surface charging may also be sensitive to water content, but a clear mechanism for the process has not been fully developed. The situation with particles is further complicated by the fact that it is often unclear whether the water resides on the particle surfaces or in the polar cores of inverse micelles. The current work explores not only the effect of water content on reverse micelle and particle charging but seeks to differentiate between water bound to the particles and water located in the micelles. This is accomplished by measuring the solution conductivity and the electrophoretic mobility of silicon dioxide particles dispersed in solutions of Isopar-L and OLOA 11000. The water content is determined for both the dispersion and the supernatant after centrifuging the particles out. It is found that at equilibrium the majority of the water in the system adsorbs to the surface of the hygroscopic silica particles. In addition, the effect of water on particle electrophoretic mobility is found to be dependent on surfactant concentration. At small OLOA concentrations, additional water results in an increase in particle mobility due to increased particle charging. However, at large OLOA concentrations, additional water leads to a decrease in particle mobility, presumably as a result of increased electrostatic screening or neutralization. Thus, particle charging and electrophoretic mobility in an apolar surfactant solution are found to be highly sensitive to both the total water content in the system and to its concentration relative to the amount of surfactant present.     

An effective way to hydrophilize gigaporous polystyrene microspheres as rapid chromatographic separation media for proteins

To overcome the disadvantages of protein denaturation and nonspecific adsorption on poly(styrene-divinylbenzene) (PS) medium as a chromatographic support, gigaporous PS microspheres prepared in our previous study were coated with hydrophobically modified agarose (phenoxyl agarose, Agap). Both the modification of agarose and the gigaporous structure of PS microspheres provided an advantage that facilitated the coating of Agap onto PS microspheres. The amount of Agap adsorbed onto the PS surface was examined as a function of the polymer concentration, and various samples of microspheres, differing in surface Agap density, were prepared. The adsorbed layer was then stabilized by chemical cross-linking and its stability was evaluated in the presence of sodium dodecyl sulfate. Results showed that PS microspheres were successfully coated with Agap, while the gigaporous structure could be well maintained. After coating, the nonspecific adsorption of proteins on PS microspheres was greatly reduced. Flow hydrodynamics experiments showed that the Agap-co-PS column had low backpressure, good permeability, and mechanical stability. Such a procedure could provide a hydrophilic low-pressure liquid chromatographic support for different types of chromatography, since the Agap layer may be easily derivatized by classical methods, and because of their good permeability, the coated microspheres have great potential applications in high-speed protein chromatography.     

Determination of the effective charge of individual colloidal particles

An optical method is presented that allows simultaneous determination of the diffusion constant and electrophoretic mobility of individual charged particles with radius down to 0.2 mum. By this method the size dependency of the effective charges and zeta potentials of individual particles can be investigated, as well as interparticle interactions and Brownian motion in confined geometries. The diffusion constant and mobility are determined from the power spectrum of the particle speed in a sinusoidal electrical field. The accuracy of the method was tested on PMMA spheres of known size in water. Experiments have been carried out on charged pigment particles with low concentration in a nonaqueous medium containing a charging agent. The mobility is found to be independent of the particle size.     

Silanization of polyelectrolyte-coated particles: an effective route to stabilize Raman tagging molecules adsorbed on micrometer-sized silver particles

Micrometer-sized Ag (microAg) powders are very efficient surface-enhanced Raman scattering (SERS) substrates. To use microAg powders as a core material for molecular sensors operating via SERS, it is necessary to stabilize the tagging (i.e., SERS-marker) molecules adsorbed onto them. We demonstrate in this work that once the tagging molecules are coated with aliphatic polyelectrolytes such as poly(allylamine hydrochloride), the base-catalyzed silanization can be readily carried out to form stable silica shells around the polyelectrolyte layers by a biomimetic process; any particle can therefore be coated with silica since polyelectrolytes can be deposited beforehand via a layer-by-layer deposition method. Even after silanization, the SERS peaks of marker molecules on microAg particles are the only observable peaks since aliphatic polyelectrolytes, as well as silica shells, are intrinsically weak Raman scatterers, and more importantly, the SERS signals must be derived mostly from the first layer of the adsorbates (i.e., the marker molecules) in direct contact with the microAg particles. Silica shells, once fabricated, can further be derivatized to possess biofunctional groups; therefore, the modified microAg particles can be used as platforms of highly stable SERS-based biological sensors, as well as barcoding materials.     

Photodissociation of p-xylene in polar and nonpolar solutions

The photodissociation of p-xylene at 266 nm in n-heptane and acetonitrile has been studied with use of nanosecond fluorescence and absorption spectroscopy. The p-methylbenzyl radical was identified in n-heptane and acetonitrile by its fluorescence, which was induced by excitation at 308 nm. The p-xylene radical cation was observed in acetonitrile by its absorption. In n-heptane, the decay rate of the S(1) state of p-xylene ((3.2 +/- 0.2) x 10(7) s(-1)) is equal to the growth rate of the p-methylbenzyl radical ((2.7 +/- 0.4) x 10(7) s(-1)), showing that the molecule dissociates via the S(1) state into the radical by C-H bond homolysis (quantum efficiency approximately 5.0 x 10(-3)). In acetonitrile, the formation of the p-xylene radical cation requires two 266 nm photons, and the decay rate of the radical cation ((1.6 +/- 0.2) x 10(6) s(-1)) equals the growth rate of the p-methylbenzyl radical ((2.0 +/- 0.2) x 10(6) s(-1)). This shows that the radical cation dissociates into the radical by deprotonation (quantum efficiency approximately 8.9 x 10(-2)).     

Electrostatic interactions of colloidal particles in nonpolar solvents: role of surface chemistry and charge control agents

We study the electrostatic and hydrodynamic interactions of colloidal particles in nonpolar solvents. Using blinking optical tweezers, we can extract the screening length, kappa-1, the effective surface potential, |ezeta*|, and the hydrodynamic radius, ah, in a single measurement. We apply this technique to suspensions of polystyrene and poly(methyl methacrylate) particles in hexadecane with soluble charge control agents, aerosol sodium di-2-ethylhexylsulfosuccinate (AOT) and polyisobutylene succinimide (OLOA-1200). We find that the electrostatic interactions of these particles depend sensitively on surface composition as well as on the concentration and chemistry of the charge control agent.     

Wetting films of polar and nonpolar liquids

Disjoining pressure isotherms for water and n-octane films on glass obtained using a recently developed apparatus, based on the interferometric technique, are compared with other values reported in the literature. Our method, including a simple cleaning procedure, yields experimental results in excellent agreement both with other experimental results and with theoretical predictions. An error analysis was made which quantifies the uncertainty of our results and simultaneously allows the minimization of the errors.     

Effective medium approximation and deposition of colloidal particles in fibrous and granular media

Laminar flow of fluids through fibrous and granular media and deposition of colloidal particles from a liquid suspension are two fundamental phenomena encountered in many industrial applications. An Effective Medium Approximation (EMA) is used to determine the fluid flow permeability and particle capture efficiency of random arrays of cylindrical and spherical collectors. The EMA assumes a model system in which a packing element (a single fiber in the fibrous medium and a single sphere in the granular medium) is surrounded by a fluid envelope and an effective-medium beyond the envelope. It integrates the important features of both the cell models and Brinkman's model. The Stokes equation and Brinkman equation are solved for the fluid envelope and effective medium regions, respectively, to obtain the permeability and close-to-surface velocity field around the collectors. The convective diffusion equation is then solved to determine the particle deposition rate. The analytical expressions for the permeability and particle deposition rate are derived for all possible cases of random packing of uniform and non-uniform cylinders and spheres. Effects of various system properties and operating conditions on deposition of colloidal particles are investigated. The physical or chemical conditions include the properties which affect the magnitude of double layer interaction: the electrolyte concentration and surface potentials, and the property which affects the van der Waals interaction: the Hamaker constant. It was found that the effects of the above properties is much more significant when the surface interactions play more important roles in the particle deposition process, or when the height of the total interaction energy barrier is higher than 5 kBT. Particle deposition becomes virtually impossible when the height of the repulsive energy barrier increases beyond 20 kBT.     

Direct measurement of the effective charge in nonpolar suspensions by optical tracking of single particles

The authors develop an ultrasensitive method for the measurement of the charge carried by a colloidal particle in a nonpolar suspension. The technique uses the phenomenon of the resonance of a particle held in an optical tweezer trap and driven by a sinusoidal electric field. The trapped particle forms a strongly damped harmonic oscillator whose fluctuations are a function of gamma, the ratio of the root-mean-square average of the electric and thermal forces on the particle. At low applied fields (gamma<1) the particle is confined to the optical axis, while at high fields (gamma>1) the probability distribution of the particle is double peaked. The periodically modulated thermal fluctuations are measured with nanometer sensitivity using an interferometric position detector. Charges, as low as a few elementary charges, can be measured with an uncertainty of about 0.25 e. This is significantly better than previous techniques and opens up new possibilities for the study of nonpolar suspensions.     

Effect of depletion interactions on transport of colloidal particles in porous media

The influence of depletion interactions on the transport of micrometer-sized, negatively charged polystyrene latex particles through porous media was studied by analysis of particle breakthrough curves as a response to short-pulse particle injections to the inlet of a packed column of glass beads. The column outlet latex particle concentration profiles and the total amount of particles exiting the column were determined as a function of the concentration of small, silica nanoparticles in the solution and the bulk flow rate. Because of similar charges, the silica particles do not adsorb to either the latex particles or glass beads and thus induce an attractive depletion force between the latex particles and glass bead collectors. The total column outlet latex particle amount was calculated by integrating the measured breakthrough concentration curve and compared to the known amount of injected particles at the column inlet. It was found that the particle recovery was a decreasing function of the silica nanoparticle concentration and the carrier fluid residence time, and an increasing function of the velocity in the bed. In addition, removing the silica nanoparticles from the flowing solution caused a second outlet peak to appear, suggesting that some of the polystyrene particles were captured in secondary energy wells. The experimental data were interpreted using the predicted potential energy profile between a single particle and a glass bead, which was assumed to consist of electrostatic, van der Waals, and depletion components. The results indicate that secondary energy wells significantly affect particle transport behavior through porous media.     

Preparation and properties of vesicles made of nonpolar/polar/nonpolar fullerene amphiphiles

Twenty potassium complexes of penta-[(4-substituted)phenyl][60]fullerene anions were synthesized and examined for their ability to form bilayer vesicles in water. The 4-substituents include alkyl groups ranging from methyl to icosanyl groups and perfluoromethyl, perfluorobutyl, and perfluorooctyl groups. The overall structure of the amphiphiles can be described as a nonpolar/polar/nonpolar (n-p-n') motif as opposed to the usual polar/nonpolar motif of lipid amphiphiles. Despite the hydrophobicity of the fullerene moiety (n-part) and alkyl/perfluoroalkyl chains (n'-part), all compounds except for the one with perfluoromethyl groups were soluble in water because of the centrally located fullerene cyclopentadienide (p-part) and spontaneously formed a vesicle of 25- to 60-nm diameter with a narrow unimodal size distribution. The vesicles are stable upon heating to 90 °C or standing over one year in air, as well as on a solid substrate in air or in vacuum, maintaining their spherical form. The vesicle membrane consists of an interdigitated bilayer of the amphiphile molecules, in which the fullerene n-part is inside and the n'-side is exposed to water. These vesicles, in particular the one bearing icosanyl chains, exhibit the smallest water permeability coefficient ever found for a self-assembled membrane in water.     

Interaction potentials, structural ordering and effective charges in dispersions of charged colloidal particles

As colloidal dispersions of charged particles exhibit a wide variety of commercial, technological and scientific applications, a considerable theoretical effort has been devoted to finding an effective interaction potential from primitive models. The forces derived from this potential should justify the spatial ordering experimentally observed under certain conditions. This paper reviews the advances in these theoretical studies as well as some experiments (based on the mentioned order) that try to corroborate them. Special attention has been paid to the Derjaguin-Landau-Verwey-Overbeek (DLVO) potential. Nowadays, many of these theoretical investigations suggest that it could be applied if some of its parameters are renormalized. Nevertheless, to achieve a renormalization procedure in a strict way (from a primitive model) is a difficult task as a result of the size and charge asymmetries between small ions and macroions. Thus, several procedures for computing renormalized charges in a simple way have been developed. However, the notion of effective charge has also been widely used (as a adjustable parameter) in order to justify results found for several kinds of colloids (like solid particle dispersions or micellar systems) by means of quite different experimental techniques. Renormalization (as well as ion condensation) approaches, experiments and the controversial relationship between theoretical and phenomenological effective charges are also reviewed in this work.     

Synthesis of charged hybrid particles via dispersion polymerization in nonpolar media for color electrophoretic display application

Direct synthesis of charged hybrid particles in non‐polar media has not been widely described in the literature but can lead to many applications such as electrophoretic displays. In this work, we propose a way to synthesize charged hybrid particles within the electrophoretic medium (Toluene or Isopar G) in the presence or not of additives (Charge Control Agent, CCA). The particles synthesis was performed by Nitroxide‐mediated Radical Polymerization (NMRP) via dispersion polymerization in aliphatic hydrocarbon solvents leading to stable chargeable particles with a good size control. Hybrid particles are successfully charged by reaction with functional monomers or addition of CCA to obtain electrophoretic particles. The performance of a dual‐color red/white ink in a display was demonstrated with a test‐cell. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 338–348     

Use of Gemini surfactants to stabilize TiO2 P25 colloidal dispersions

Photocatalytically active TiO₂ P25 nanoparticles, widely used for practical applications, were investigated. The nominal size of TiO₂ P25 nanoparticles is 21 nm, but they easily agglomerate in aqueous media, depending on pH and ionic strength. TiO₂ P25 aqueous dispersions were stabilized by alkanediyl-α,ω-bis-N-dodecyl-N, N′-dimethyl-ammonium bromide, cationic Gemini surfactant. The optimal conditions required to obtain stable dispersions, without formation of large agglomerates, were experienced. The stabilization of TiO₂ P25 nanoparticles by cationic Gemini surfactant was investigated in some details. Different amounts of Gemini surfactant were used, at concentrations between 1.0 and 250 × 10⁻⁶ mol L⁻¹, well below the critical micelle concentration. Dynamic light scattering and zeta potential analyses estimated the particle size and the dispersions stability. When the proper amount of Gemini surfactant was used, the resulting nanoparticles were still poly-disperse, but large agglomerates disappeared and were remarkably redispersible.     

An overview of lipid membrane supported by colloidal particles

In recent years, original hybrid assemblies composed of a particle core surrounded by a lipid shell emerged as promising entities for various biotechnological applications. Their broadened bio-potentialities, ranging from model membrane systems or biomolecule screening supports, to substance delivery reservoirs or therapeutic vectors, are furthered by their versatility of composition due to the possible wide variation in the particle nature and size, as well as in the lipid formulation. The synthesis, the characteristics, and the uses of these Lipid/Particle assemblies encountered in the literature so far are reviewed, and classified according to the spherical core size in order to highlight general trends. Moreover, several criteria are particularly discussed: i) the interactions involved between the particles and the lipids, and implicitly the assembly elaboration mechanism, ii) the most suited techniques for an accurate characterization of the entities from structural and physicochemical points of view, and iii) the remarkable properties of the solid-supported lipid membrane obtained.