Low field microwave absorption of YBa2Cu3O7−δ thin films

The modulated microwave absorption in YBa₂Cu₃O_7−δ thin films was studied as a function of temperature, modulation amplitude, and microwave power. The comparative nature of weak links in YBaCuO thin films, ceramics, and powders is discussed.     

Enhanced diamagnetism in YBa2Cu3O7−δ by hydorgen-plasma treatment

We report that the diamagnetism of as-grown YBa₂Cu₃O_7−δ powders can be enhanced by treatment with RF-generated hydrogen plasma. The field-cooling susceptibility at 5 K is found to increase by up to 24%. The enhancement is reproducible for all five samples studied. The lattice parameter c decreases after hydrogenation. For a sample treated for the shortest period, its pinning potential,obtained from magnetic relaxation measurements, is reduced following H-treatment.     

Crystal structure of YBa2Cu3O7−x thin films prepared by pulsed laser deposition with substrate bias voltage

The crystal structure of YBa₂Cu₃O_7−x thin films has been investigated by cross-section transmission electron microscopy. The samples were deposited on MgO (100) substrates at 670°C with substrate bias voltages of ±300 V. For the unbiased case, c-axis, a-axis and (103) oriented domains normal to the substrate surface were observed. In this film, the c-axis oriented domains are dominant, but the crystal often exhibits a longer c-lattice constant than that of the YBa₂Cu₃O_7−x system, so extra cationic layers are inserted in the YBa₂Cu₃O_7−x intrinsic stacking sequence. For the case of −300 V, rotated domains were dominant in the entire film; however, c-axis oriented domains also grow from the substrate surface. Small-angle semicoherent grain boundaries between them were observed. In the case of +300 V, all the grains show c-axis oriented YBa₂Cu₃O_7−x. The degree of preferential orientation of the grains is reduced at negative bias voltage of −300 V and the structure defects are reduced by applying a positive bias of +300 V.     

Thermally activated flux dissipation in c-axis-oriented YBa2Cu3O7−δ ultrathin films

The resistive transitions of ultrathin YBa₂Cu₃O_7−δ (YBCO) films with thicknesses 75 and 200 Å were studied under magnetic fields. For the 75 Å film under a 5 T parallel magnetic field (Hbab-plane), no broadening of the resistive transition occurred. In the perpendicular magnetic field (H ab-plane), the broadening of the resistive transition of the 75 Å film is larger than that of the 200 Å thick film. The flux activation energy U was found to be linearly dependent on the temperature and logarithmically dependent on the magnetic field for both 75 and 200 Å films, which means the two samples have a two-dimensional vortex lattice. Furthermore, the activation energy U also increased with the film thickness, indicating that the magnetic correlation length in the c-axis direction l_c is larger than the 200 Å for bulk YBCO.     

Phase separation in YBa2Cu3O7−δ single crystals near δ = 0

X-ray diffraction, resistivity, AC and DC magnetization data on high-quality single crystals of YBa₂Cu₃O_7−δ are presented. We demonstrate that for δ<0.08, the (0 0 l) diffraction lines are split into two, indicating that at these high oxygen concentrations the crystals are no longer single phase but actually consist of two (or more) different phases with slightly different c-axis parameters. In the two-phase region, the electrical resistivity and the AC and DC magnetic susceptibilities show a broadening of the superconducting transition. This broadening is thought to be due to the proximity effect or strains in two finely dispersed phases with slightly different transition temperatures.     

Microstructure and transport properties of YBa2Cu3O7−δ films produced by laser ablation from a BaF2/Y2O3/CuO target

The effects of varying the temperature and duration of the post-deposition anneal in watersaturated oxygen were investigated for YBa₂Cu₃O_7−δ films of varying thickness. The films were produced by laser ablation from pressed powder targets consisting of BaF₂,Y₂O₃, and CuO mixtures. This technique produces superconducting films with a highly textured surface. The films were fabricated on SrTiO₃ substrates and were analyzed with X-ray diffraction, scanning electron microscopy, and temperature dependent resistivity. Critical current density (J_c) measurements were performed in magnetic fields up to 1 T. For film thickness on the order of 900 nm, completely c-axis oriented films were obtained with a 60 min anneal at 850°C. Thinner films required less annealing, either shorter times or lower temperatures, to achieve similar results, indicating that the optimal annealing conditions are dependent on film thickness.     

Positron annihilation in the hydrogenated granular superconductor of YBa2Cu3O7−δ

In this paper, we have used the sputtering neutral-particles mass spectroscopy (SNMS) and positron-annihilation technique to investigate the effect of hydrogenation on the physical properties of different oxygenated YBa₂Cu₃O_7−δ superconductors. Under the same of hydrogenation treatment, the hydrogenation effects on the superconductors are compared to the non-superconductors. It was shown that the hydrogen concentration in the superconductors is about eight times of the non-superconductor's. It was proven that the long lifetime of positrons in the annihilation process is determined by the variation of the concentrations of monovacancies and microvoids, which takes place in both of intragrain and intergrain samples. The hydrogenation effect can be classified into four stages. At the first stage, the hydrogen atoms fill both monovacancy and microvoid. At the end of the first stage, the long lifetime τ₂ reaches the maximum value which is determined by the lifetime of the positron in the monovacancy-free and nearly microvoid-exhausted YBCO sample. In the second stage, the hydrogen charging will lead to creation of new monovacancies; this will make the long lifetime τ₂ drop monotonically to its minimum value. In the third stage, further hydrogen charging promotes the formation of microvoids, and leads to an increasing τ₂ up to a saturation value, which indicates the equilibrium concentrations of monovacancy and microvoid at that temperature.     

Dynamic softening of vortex lines in YBa2Cu3O7−δ single crystals

Transport measurements in the mixed state of oxygen-deficient YBa₂Cu₃O_7−δ single crystals using the flux transformer configuration show that the flux liquid changes with increasing anisotropy from strongly correlated to uncorrelated in the field direction. For intermediate coupling, the current inducing loss of vortex correlation has a maximum near the irreversibility temperature. Thus, an effective softening of vortex lines with decreasing temperature is detected. We propose a simple model that accounts for this behavior by including the effects of the pinning potential on the dynamics of vortices.     

Properties of YBa2Cu3O7−δ/YBa2CoxCu3−xOy/YBa2Cu3O7−δ Josephson edge junctions with 0.1 x 0.3 and the effect of flux flow on their normal resistance

YBa₂Cu₃O_7−δ (YBCO) based SNS edge junctions with cobalt doped YBCO barriers were prepared and characterized. At 77 K, good junctions had RSJ-like I–V curves with excess current, magnetic suppression of I_c of about 50% or more, and clear microwave steps. The conductance values 1/R_N at 77 K of junctions with different barrier thickness and composition, were proportional to the junction areas A, but show little correlation with the thickness of the barriers t_B in the range of 15t_B100nm. The corresponding I_cR_N products were observed to scale as J^0.66±0.09_c, similar to what was found by others. At the same time, the measured values of R_N are much smaller than what is expected based on the dimensions of the junction and the resistivity of the barrier material. To explain all of this, we propose a model in which at high supercurrent densities, flux flow of Josephson vortices in the junction leads to R_N values which are lower than expected. This model predicts

Full-size image (1K)

, which fits the observed results very well.     

Critical current density of polycrystalline YBa2Cu3O7−δ consisting of tin-coated grains

Tin and its oxides have been introduced into the intergrain areas of polycrystalline YBa₂Cu₃O_7−δ by coating the crystalline grains with a thin layer of tin and sintering the ceramics in flowing oxygen and argon. The transport critical current density J_c at 77 K in a magnetic field of 0−1.5 T is enhanced as a result of the coating. A probable improvement of the intergrain weak links is suggested.     

Realization and properties of ramp-type YBa2Cu3O7−δ/Au/Nb junctions

All-thin-film ramp type Josephson junctions between YBa₂Cu₃O_7−δ and Nb have been fabricated. This procedure allows connections between high-T_c and low-T_c superconductors at different crystal sides of the high-T_c superconductor on one chip, which is of great interest for novel phase devices. A thin Au layer is incorporated as a chemical barrier to avoid oxygen transfer from the YBa₂Cu₃O_7−δ to the Nb. Critical current densities up to 600 A/cm² are obtained at T=4.2 K, with typical R_nA values of 0.8 μΩ cm². The variation of the magnetic field dependence of the critical current with the angle between the junction barrier and the YBa₂Cu₃O_7−δ crystal axes is explained by considering a predominant d_x²−y² order parameter symmetry of the YBa₂Cu₃O_7−δ. The successful fabrication of these junctions allows the implementation of novel superconducting electronics, such as complementary Josephson circuitry or proposed qubit concepts, using the unconventional order parameter symmetry of the high-T_c superconductor.     

A new method to preserve the c-axis growth of thick YBa2Cu3O7–δ films grown by pulsed laser deposition

YBa₂Cu₃O_7–δ (YBCO) films were prepared on (1 0 0) MgO substrates by pulsed laser deposition (PLD) method. In order to eliminate the a-axis growth, which is commonly observed in the YBCO film thicker than a critical value, we developed a new PLD target that was sintered at a temperature far below YBCO 123 phase formation. The surface analysis made by AFM technique confirmed that very fine particles of around 20 nm size could be ejected from the new target to the substrate. The fine oxide clusters could be easily moved and incorporated into the YBCO phase thus benefited the c-axis growth even in the thick films. For instance, only the c-axis growth in the new film with a thickness of about 650 nm was larger than a critical thickness of the a-axis growth. However, in the standard film of the same thickness, there is 24.5% of the a-axis growth accompanying the main c-axis growth. Therefore, the c-axis growth could be preserved in the very thick YBCO film by a non-superconducting target.     

Study of the superconducting transition in YBa2Cu3O7−δ single crystal by thermopower measurements

We have determined the superconducting transition in YBa₂Cu₃O_7−δ single crystal by measurements of thermopower. Two transitions were observed in both the ab-plane and the c-direction. The high temperature transition may have a close relation to the surface shell of the crystal.     

Dependence of the laser-induced voltages on the oxygen content in normal state YBa2Cu3O7−δ films

Our investigation on the relation between oxygen content and the laser-induced voltages of the YBa₂Cu₃O_7−δ films in normal-state shows that deoxygenation of the superconducting films reduces the laser-induced voltages greatly, even reverses the sign of the signals at large oxygen deficiency. The absolute value of the negative signal at large oxygen deficiency can be greater than that of the positive signal.     

Photocurrent in superconducting YBa2Cu3O7−x films induced by an infrared free electron laser

Since the discovery of high-temperature cuprate superconductors, there has been much intensive study about the mechanism of them. However, identifying the dynamical mechanism behind them remains one of the great challenges in condensed matter physics. We investigated the high-temperature YBa₂Cu₃O_7−x superconducting films by using a free electron laser (FEL). The method is a type of photoelectron spectroscopy called a free electron laser internal photoemission. The spectrum of the photocurrent induced by FEL was measured in the case of 15 K and 100 K. We estimated the superconductive gap energy of YBa₂Cu₃O_7−x by comparing the photocurrent spectrum of the superconductive state with that of non-superconductive state.     

Transient creep of YBa2Cu3O7−x superconductor

Rapid changes of oxygen partial pressure (P_O2) between 10³ and 2.1×10⁴ Pa have been carried out during steady-state plastic deformation of polycrystalline YBa₂Cu₃O_7−x (YBCO) at temperatures between 825 and 900°C. Transient creep was observed after such P_O2 changes. The analysis of these creep transients allowed the determination of the chemical diffusion coefficient for reequilibration, which is identical to that found from thermogravimetry and electrical conductivity experiments for oxygen vacancies.     

Low temperature magnetocaloric effects in Dy1Ba2Cu3O7−δ and Y1Ba2Cu3O7−δ high-Tc single crystals

The heat release has been measured in high temperature superconductors during and after a change of the external magnetic field μ₀H_a ≤ 0.5 T applied parallel to the c-axis at 0.1 K ≤ T ≤ 0.45 K. Two Y123 and one Dy123 twinned single crystals were investigated. An analysis of the heat release based on the Bean model and on a model for thin superconductors in perpendicular geometry recently proposed by Brandt et al. has been carried out. During field sweep we measured ∝ H_a²dH_a/dt. This dependence can be understood within the Bean model for longitudinal geometry. The critical current densities obtained with this method are in good agreement with those from magnetization measurements. We also present measurements, and a first quantitative analysis, of dissipation due to the time relaxation of the flux line lattice after a field sweep. For the heat release a t⁻¹ dependence has been found which corresponds to a logarithmic time dependence of the magnetization. The normalized relaxation rate we obtained is in agreement with literature values.     

Two models for the transport properties of YBa2Cu3O7−δ in its normal state

The high-temperature superconductor YBa₂Cu₃O_7−δ in its normal state, shows unusual dependence of its transport properties on the oxygen deficiency parameter δ and on temperature: for δ ≈ 0 both the resistivity and the Hall number rise linearly with temperature, while the thermoelectric power is very small. In order to interpret this unusual combination of properties we propose two alternative models, a two-dimensional tight-binding wide-band model, and a narrow-band model. In the first case we assume scattering by a fully excited boson field, with a mean free path Λ ∝ 1/T. In the second model we assume a band composed of two parts, where the upper smaller part does not contribute to transport (as would result from the existence of a mobility edge), and Λ is independent of temperature. The calculated results are compared with experiments.     

Synthesis of YBa2Cu3O7−x superconducting thin films on LaAlO3 by means of PAMOCVD

High-T_c superconducting thin films have been deposited in situ by means of a plasma assisted metal-organic chemical vapour deposition (PAMOCVD) process on LaAlO₃. An EMCORE high-speed rotating disc reactor was used to deposit the films at a substrate temperature of 600°C to 800°C. The system is equipped with a (remote) 120 W microwave plasma generator. The oxidising plasma gas is N₂O and/or O₂ while Ar was used as the inert carrier gas for the different metal-organics. The influence of different process parameters (such as the temperatures of the metal-organics, substrate temperature, and plasma gas composition) on the superconductive properties and on the morphology of the films was investigated. Surface morphology and composition were studied by SEM/EDX or EPMA, and AC susceptibility measurements were used to investigate the superconductive properties (T_c and J_c). X-ray diffraction measurements indicated that single-phase YBa₂Cu₃O_7−x films were epitaxially grown with the 00l orientation perpendicular to the substrate surface. The critical temperature (T_c) of the films is about 90 K and the critical current density (J_c) is higher than 10⁶ A/cm² at 77 K and zero field.     

Peak effect and oxygen ordering in YBa2Cu3O7−δ single crystals

We have investigated the second magnetization peak in pure YBa₂Cu₃O_7−δ single crystals with various oxygen contents (6.91<7−δ<6.97) and degrees of oxygen vacancy ordering, as achieved by low (1 bar) and high (100 bar) oxygen pressure annealing. Although the position of the peak changes drastically with oxygen stoichiometry, no dependence on the distribution of oxygen vacancies has been found for temperatures below 70 K. For T>70 K, however, ordering effects become important as demonstrated by the disappearance of the peak for the high pressure annealed samples. These results suggest that while at low temperatures, pinning of the vortex system by clusters or a more homogeneous distribution of oxygen vacancies is similar, at elevated T, the former are much stronger pinning sites leading to larger hysteresis and the presence of the peak.