Ruthenium(III) catalysis in the reaction of hexacyanoferrate(III) and iodide ions in perchloric acid medium

RuCl₃ can further catalyze the reaction between hexacyanoferrate(III) and iodide ions, which is already catalyzed by the hydrogen ions obtained from perchloric acid. Rate, when the reaction is catalyzed only by the hydrogen ions, was separated graphically from the rate when ruthenium(III) and H⁺ ions both catalyze the reaction. Reactions studied separately in the presence as well as in the absence of RuCl₃ under similar conditions were found to follow second order kinetics w.r.t. [I⁻]. While the rate showed direct proportionality w.r.t. [Fe(CN)₆]³⁻ and [RuCl₃]. At low concentrations the reaction shows direct proportionality with respect to [H⁺] which tends to become proportional to the square of hydrogen ion concentrations. External addition of [Fe(CN)₆]⁴⁻ ions retards the reaction velocity while change in ionic strength of the medium has no effect on the rate. With the help of the intercept of the catalyst graph, extent of the reaction, which takes place without adding ruthenium(III) was calculated and it was in accordance with the values obtained from the separately studied reaction in which only H⁺ ions catalyze the reaction. It is proposed that ruthenium forms a complex, which slowly disproportionates into the rate-determining step. Arrhenius parameters at four different temperatures were also calculated.      

Amperometric determination of formaldehyde via the hexacyanoferrate(III) -coupled dehydrogenase reaction

An enzymatic method with amperometric detection was developed for the determination of formaldehyde. Formaldehyde is first oxidized by reaction with NAD⁺ in the presence of formaldehyde dehydrogenase. The resulting NADH is then oxidized by hexacyanoferrate(III) in the presence of diaphorase to produce hexacyanoferrate(II). The anodic current generated by oxidation of the hexacyanoferrate(II) at the surface of a glassy carbon working electrode, held at a potential of 0.40 V vs. an Ag/AgCl reference electrode, is measured. The effects of solution conditions are examined and a linear relationship between rate of current change and formaldehyde concentration is obtained from 0.01 to 0.5 μg ml^?1 with a correlation coefficient of 0.9998. The relative standard deviation for the proposed method is 6.4% at 0.01 μg ml^?1 formaldehyde and 0.88% at 0.5 μg ml^?1.     

Oxidimetric determination of ascorbic acid with potassium hexacyanoferrate(III) in acid medium

Conditions have been developed for the titrimetric determination of ascorbic acid with hexacyanoferrate(III), with potentiometric and visual end-points, in sulphuric, hydrochloric or phosphoric acid media. Several organic substances likely to be present in plant tissues do not interfere.     

Catalytic effect of copper on the hexacyanoferrate(III)-cyanide redox reaction

The oxidation of cyanide with hexacyanoferrate(III) is a thermodynamically possible but kinetically slow reaction, which is catalysed by copper(II). The catalysed reaction has a second-order dependence on hexacyanoferrate(III) concentration, and the pseudo second-order rate constant increases linearly with the copper concentration, at least in the range from 10(-7) to 10(-3)M.     

Thermal decomposition of hydrotalcitewith hexacyanoferrate(II) and hexacyanoferrate(III) anions in the interlayer

The thermal decompositions of hydrotalcites with hexacyanoferrate(II) and hexacyanoferrate(III) in the interlayer have been studied using thermogravimetry combined with mass spectrometry. X-ray diffraction shows the hydrotalcites have a d(003) spacing of 11.1 and 10.9 Å which compares with a d-spacing of 7.9 and 7.98 Å for the hydrotalcite with carbonate or sulphate in the interlayer. XRD was also used to determine the products of the thermal decomposition. For the hydrotalcite decomposition the products were MgO, Fe₂O₃ and a spinel MgAl₂O₄. Dehydration and dehydroxylation take place in three steps each and the loss of cyanide ions in two steps.     

Cu(II) promoted oxidation of L-valine by hexacyanoferrate(III) in cationic micellar medium

The kinetics of Cu(II) accelerated L-valine (Val) oxidation by hexacyanoferrate(III) in CTAB micellar medium were investigated by measuring the decline in absorbance at 420 nm. By adjusting one variable at a time, the progression of the reaction has been inspected as a function of [OH⁻], ionic strength, [CTAB], [Cu(II)], [Val], [Fe(CN)₆³⁻], and temperature using the pseudo-first-order condition. The results show that [CTAB] is the critical parameter with a discernible influence on reaction rate. [Fe(CN)₆]^3- interacts with Val in a 2:1 ratio, and this reaction exhibits first-order dependency with regard to [Fe(CN)₆³⁻]. In the investigated concentration ranges of Cu(II), [OH⁻], and [Val], the reaction demonstrates fractional-first-order kinetics. The linear increase in reaction rate with added electrolyte is indicative of a positive salt effect. CTAB significantly catalyzes the process, and once at a maximum, the rate remains almost constant as [CTAB] increases. Reduced repulsion between surfactant molecules' positive charge heads brought on by the negatively charged [Fe(CN)₆]^3-, OH⁻, and [Cu(OH)₄]^2- molecules may be responsible for the observed drop in CMC of CTAB.     

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in aqueous alkaline medium

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in alkaline medium is assumed to occurvia substrate-catalyst complex formation followed by the interaction of oxidant and complex in the rate-limiting stage and yield the products with regeneration of catalyst in the subsequent fast step. The reaction exhibits fractional order in hexacyanoferrate(II) and first-order unity each in oxidant and catalyst. The reaction constants involved in the mechanism are derived.     

Effect of anionic surfactant sodium dodecyl sulfate on the reaction of hexacyanoferrate(III) oxidation of levothyroxine in aqueous medium: a kinetic and mechanistic approach

The effect of anionic surfactant sodium dodecyl sulfate (SDS) on the rate of oxidation of levothyroxine (LVT) by hexacyanoferrate(III) in alkaline medium has been investigated spectrophotometrically at different temperatures. The reaction follows a complex kinetics showing first order dependence of rate with respect to both alkali and LVT. The effect of SDS on the rate of reaction has been observed at the critical miceller concentration of the surfactant. indicating binding of the substrate with the surfactant micelle. The binding parameters have also been evaluated using the Menger and Portnoy model.     

Thermal decomposition of hydrotalcite with hexacyanoferrate(II) and hexacyanoferrate(III) anions in the interlayer

The mechanism for the decomposition of hydrotalcite remains unsolved. Controlled rate thermal analysis enables this decomposition pathway to be explored. The thermal decomposition of hydrotalcites with hexacyanoferrate(II) and hexacyanoferrate(III) in the interlayer has been studied using controlled rate thermal analysis technology. X-ray diffraction shows the hydrotalcites have a d(003) spacing of 10.9 and 11.1 Å which compares with a d-spacing of 7.9 and 7.98 Å for the hydrotalcite with carbonate or sulphate in the interlayer. Calculations show dehydration with a total loss of 7 moles of water proving the formula of hexacyanoferrate(II) intercalated hydrotalcite is Mg₆Al₂(OH)₁₆[Fe(CN)₆]_0.5·7H₂O and 9.0 moles for the hexacyanoferrate(III) intercalated hydrotalcite with the formula of Mg₆Al₂(OH)₁₆[Fe(CN)₆]_0.66·9H₂O. CRTA technology indicates the partial collapse of the dehydrated mineral. Dehydroxylation combined with CN unit loss occurs in two isothermal stages at 377 and 390°C for the hexacyanoferrate(III) and in a single isothermal process at 374°C for the hexacyanoferrate(III) hydrotalcite.     

Kinetics and mechanism of oxidation of phenylhydrazine and P-bromophenylhydrazine by hexacyanoferrate(III) in acidic medium

Kietics of oxidation of phenylhydrazine and p-bromophenylhydrazine by hexacyanoferrate(III) in acidic medium have been studied. The reactions follow similar kinetics, being first order with respect to both hydrazine and exacyanoferrate(III) and inverse first order with respect to the hydrogen ion. Addition of hexacyanoferrate(II) has no retarding effect on the rate of oxidation. The effects of varying ionic strength, dielectric constant, and temperature on the reaction rates have been investigated. A plausible mechanism has been proposed to account for the experimental results. Benzene and bromobenzene have been identified as the oxidation products.     

Oxidation of chromium(III) by alkaline hexacyanoferrate(III)

Alkaline hexacyanoferrate(III) oxidation of freshly prepared solutions of Cr^III (pH>12) at 27°C follows the rate law, Equation 1:

Mechanism of hexacyanoferrate(III) oxidation of 1-propanol and 2-propanol in aqueous alkaline medium

Kinetic studies of the hexacyanoferrate(III) oxidation of 1-propanol and 2-propanol have been carried out in aqueous alkaline medium. The reaction velocity is of first order with respect to alcohols, alkali and hexacyanoferrate(III). The kinetic data suggest that the oxidation involves the formation of an anion of the substrate undergoes oxidation with hexacyanoferrate(III) via charge transfer process. The free radical thus produced is further oxidised to form the final products.

---

Der Mechanismus der Hexacyanoferrat(III)-Oxidation von 1-Propanol und 2-Propanol in alkalischem, wäßrigen Milieu

Zusammenfassung Kinetische Studien ergaben für die Oxidation Abhängigkeiten erster Ordnung sowohl für die Alkohole, als auch für OH- und Hexacyanoferrat(III). Die Daten legen nahe, daß das Substrat-Anion zunächst unter einfacher Ladungsübertragung oxidiert wird, wobei das gebildete freie Radikal weiterer Oxidation zu den endgültigen Reaktionsprodukten unterliegt.

     

Determination of antimony(III) with potassium hexacyanoferrate(III)

The determination of antimony(III) with potassium hexacyanoferrate(III) in 5M hydrochloric acid medium and in the presence of 40% v/v acetic acid is described. Ferroin is used as the indicator. Antimony has been determined in tartar emetic, solder and pig lead. Arsenic(III) does not interfere.     

Ruthenium (III) catalysed and uncatalysed oxidation of torsemide by hexacyanoferrate (III) in aqueous alkaline medium: A kinetic comparative approach

The kinetics approach of oxidation of torsemide (TOR) by hexacyanoferrate (III) [HCF (III)] has been identified spectrophotometrically at 420 ​nm in the alkaline medium in the presence and absence of catalyst ruthenium (III) at 25 ​°C, by keeping ionic strength (1 ​× ​10⁻² ​mol ​dm⁻³) constant. The reaction exhibits at the stoichiometry ratio 1:2 of TOR and HCF (III), for uncatalysed and catalysed reactions. In the absence and presence of the catalyst, the order of the reactions obtained for TOR and HCF (III) was unity. However, the rate of the reactions enhanced by the increase in the concentration of catalyst, as well as the rate increases with an increase in alkaline concentration. The activation parameters for the reaction at the slow step were identified, and the effect of temperature on the rate of the reaction was analysed. A suitable mechanism has been demonstrated by considering the obtained results. The derived rate laws are reliable with analysed experimental kinetics.     

Oxidimetric determination of indigo with iron(III) and hexacyanoferrate(III)

The use of iron(III) in sulphuric acid medium and of potassium hexacyanoferrate(III) in hydrochloric acid medium has been investigated for the oxidimetric determination of indigo and indigo sulphonic acid. Conditions have been established for the assay of the dye with iron(III) sulphate at 100 degrees and with potassium hexacyanoferrate(III) at room temperature.     

Outer‐sphere reduction of hexacyanoferrate(III) by enolizable and nonenolizable aldehydes in alkaline medium

Outer‐sphere reduction of hexacyanoferrate(III) by some enolizable/nonenolizable aldehydes (viz., aliphatic, heterocyclic, and aromatic aldehydes) in alkaline medium has been studied spectrophotometrically at λ_max = 420 nm. The reactions are first order each in [aldehyde] and [Fe(CN)₆^3?]. The rate increases with an increase in [OH^?] in the oxidation of aliphatic and heterocyclic aldehydes, whereas it is independent of [OH^?] in the reaction with aromatic aldehydes. The intervention of free radicals in the reaction mixture was carried out using both acrylonitrile and acrylamide scavenger in two different experiments. The kinetic results indicate that the oxidation of benzaldehyde in aqueous medium proceeds at a slower rate than the aliphatic aldehydes (other than formaldehyde) and furfural. The values of third‐order rate constant (k₃) at 308 K in the oxidations of some aliphatic aldehydes and furfural follow the order (CH₃)₂CH? > CH₃CH₂? > CH₃? > C₄H₃O? > H? . The rate constants correlate with Taft's σ* value, the reaction constant being negative (–9.8). The pseudo–first‐order rate constants in the oxidations of benzaldehyde and substituted benzaldehydes follow the order ? NO₂ > ? H > ? Cl > ? OCH₃. The Hammett plot is also linear with a ρ value (0.6488) for meta‐ and para‐substituted benzaldehydes. The kinetic isotope effect for benzaldehyde (k_H/k_D = 1.93 at 303 K) was obtained. The rate‐determining step is the outer‐sphere formation of Fe(CN)₆^4? and free radicals, which is followed by the rapid oxidation of free radicals by Fe(CN)₆^3? to give products. The kinetic data and hence thermodynamic parameters have been used to distinguish enolizable and nonenolizable aldehydes. An attempt has also been made to correlate kinetic data with hydration equilibrium constants of some aliphatic aldehydes. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 494–505, 2012