Evaluation of the 153Sm-EDTMP radiochemical purity using three chromatographic methods

The knowledge of radioactive and stable elements partitioning to natural sediment systems is essential for modelling their environmental fate. A sequential extraction method consisting of six operationally-defined fractions has been developed for determining the geochemical partitioning of natural (U, Th, ⁴⁰K) and antropogenic (Pu, ²⁴¹Am, ¹³⁷Cs) radionuclides in a 10 cm deep sediment sample collected in the Tyrrhenian sea (Gaeta Gulf, Italy) in front of the Garigliano Nuclear Power Plant. ¹³⁷Cs and ⁴⁰K were measured by gamma-spectrometry. Extraction chromatography with Microthene-TOPO (U, Th), Microthene-TNOA (Pu) and Microthene-HDEHP (Am) was used for the chemical separation of the alpha-emitters: after electrodeposition alpha-spectrometry was carried out. Some stable elements (Fe, Mn, Al, Ca, Pb, Ba, Ti, Sr, Cu, Ni) were also determined in the different fractions to get more information about the chemical association of the radionuclides.     

Kit preparation of153Sm-EDTMP and factors affecting radiochemical purity and stability

A fast kit method was developed for the production of¹⁵³Sm-EDTMP in two steps avoiding the use of nitric acid, evaporation and sterilization of the final solution by autoclave. Methods of analysis for the determination of chemical and radiochemical purity in the radiopharmaceutical solution were established. Factors affecting radiochemical purity and stability of the complex as the molar ratio of EDTMP/Sm, concentration of phosphate buffer and neutralization of EDTMP prior kit preparation were also analyzed. The use of this radiopharmaceutical in rabbits and patients showed selective skeletal uptake.     

Some radiation protection problems connected with the use of186Re-HEDP and153Sm-EDTMP for palliative therapy of bone metastases

The paper deals with the problem of the outpatient administration of¹⁸⁶Re-HEDP and¹⁵³Sm-EDTMP for palliative therapy of bone metastases. The subsequent 6 hours stay of the treated patients in a department of nuclear medicine appears to be in compliance with regulations proposed in the Czech Republic as well as with ICRP recommendations.     

Study on analysis of153Sm-EDTMP stability in vitro and vivo by HPLC

The behavior of¹⁵³Sm-EDTMP in vitro and vivo is analyzed by the size exclusion HPLC. The experimental results show that EDTMP amounts have an obvious effect on the stability in vitro and uptake of¹⁵³Sm-EDTMP in the liver. HPLC analysis of urine sample indicates that¹⁵³Sm-EDTMP es excreted in the original form. The behavior in vivo of¹⁵³Sm-EDTMP containing 4 μg is similar to that of¹⁵³Sm-EDTMP containing 50 μg EDTMP at 1 h post-injection.     

An improved method for purifying α-metallophthalocyanines for use as radionuclide preparation targets

Modifications of the conventional precipitation method for purifying -metallophthalocyanines give a product essentially free of the usual occluded impurities, significantly decreasing the total metallic content of extracted radionuclides. Application of the improved method to the preparation of an -CoPc target is described.     

A new preparation of samarium dibromide and its use in stoichiometric and catalytic pinacol coupling reactions

A new convenient preparation of samarium dibromide in THF is reported. Pinacol coupling reactions using SmBr₂ in catalytic amounts together with mischmetall as a coreductant have been performed with a variety of carbonyl compounds.     

Heterometallic nickel(II) samarium(III) diethylenetriaminepentaacetate, a starting material for the preparation of samarium nickelate films

A reaction of samarium oxide, nickel oxocarbonate, and diethylenetriaminepentaacetic acid (H₅DTPA) taken in stoichiometric proportions in water gave SmNiDTPA · 10H₂O as a glassy solid. The formation of this heterometallic complex was confirmed by data from elemental analysis, IR spectroscopy, thermal analysis, and X-ray fluorescence analysis. An aqueous solution of the complex was used to deposit SmNiO₃ films onto a single-crystal SrTiO₃(001) substrate. The SmNiO₃ phase in films obtained upon 3-h annealing at 500°C was identified by powder X-ray diffraction. Films deposited from a solution of an equimolar mixture of monometallic samarium and nickel diethylenetriaminepentaacetates contained no samarium nickelate.     

Optimization of cementitious composite for heavyweight concrete preparation using conduction calorimetry

The present work investigates the hydration heat of different cement composites by means of conduction calorimetry to optimize the composition of binder in the design of heavyweight concrete as biological shielding. For this purpose, Portland cement CEM I 42.5 R was replaced by a different portion of supplementary cementitious materials (blast furnace slag, metakaolin, silica fume/limestone) at 75%, 65%, 60%, 55%, and 50% levels to obtain low hydration heat lower than 250 j g^?1. All ingredients were analyzed by energy dispersive X-ray fluorescence (EDXRF) and nuclear activation analysis (NAA) to assess the content of major elements and isotopes. A mixture of two high-density aggregates (barite and magnetite) was used to prepare three heavyweights concretes with compressive strength exceeding 45 MPa and bulk density ranging between 3400 and 3500 kg m^?3. After a short period of volume expansion (up to 4 h), a slight shrinkage (max. 0.3°/°°) has been observed. Also, thermophysical properties (thermal conductivity, volumetric specific heat, thermal diffusivity) and other properties were determined. The results showed that aggregate content and not binder is the main factor influencing the engineering properties of heavyweight concretes.

     

153Sm metallic-hydroxide macroaggregates: An improved preparation for radiation synovectomy

A new type of preparation employing¹⁵³Sm metallic-hydroxide macroaggregates (¹⁵³Sm-MHM) for radiation synovectomy was developed. The radiopharmaceutical was prepared by reacting the aqueous solution of¹⁵³SmCl₃ with sodium borohydride solution in 0.5N NaOH. Microscopic analysis showed that¹⁵³Sm-MHM mean particle size was 4 m (range 1–15 m) avoiding the formation of fine particles (<1 m) which were¹⁵³Sm-hydroxide macroaggregates preparations (¹⁵³Sm-HM). Also, suspension properties as sedimentation rate, were better for¹⁵³Sm-MHM than for¹⁵³Sm-hydroxyapatite and¹⁵³Sm-HM. Biological studies in normal rabbits demonstrated high retention into de Knee joint space even at 48 h after administration of¹⁵³Sm-MHM (>99%).     

Wavelength dependence of polyyne preparation by liquid-phase laser ablation using pellet targets

The amount of polyynes produced by Nd:YAG laser (355, 532, and 1064 nm) ablation of fullerene and graphite pellet targets was the largest for 1064 nm ablation, contrary to the powder target in the previous report. This result is believed to come from the difference in the main polyyne-production area in liquids in the optical cell, depending on the pellet and powder targets.     

Cellular targets of natural products

Natural products have evolved, at least in part, to bind to biological macromolecules, particularly proteins. As a result, natural products are able to interact with many specific targets within the cell. Indeed for many years this has been central in the drug development process. Today, however, natural products are finding increasing use as probes to interrogate biological systems as part of chemical genomics and related research. In order to demonstrate the utility of natural products in these efforts, the biological activities of many of the major classes of natural products is discussed, according to the cellular organelle and localisation of their specific molecular targets. Emphasis is given to newly discovered compounds and activities that either provide interesting insights into a specific biological function, or that form the basis for potentially new therapeutic approaches.     

Optimization of the preparation of nalmefene-loaded sustained-release microspheres using central composite design

Nalmefene-loaded poly(lactic-co-glycolic acid) microspheres were prepared by O/O emulsification/solvent evaporation method. The central composite design-response surface methodology was used to optimize and predict the preparation microspheres. Effects of three independent variable variables i.e., Span80 concentration in outer phase, poly(lactic-co-glycolic acid) concentration in inner phase and theoretical drug content were evaluated on a number of response variables. Response variables selected in this study were drug content, encapsulation efficiency, mean diameter, diameter span and the cumulative percentage of the drug released in the first day after incubation (marked as F1d, and it was also calculated as the initial burst). Multiple linear regression and second-order polynomial model were fitted to the data, and the resulting equations were used to produce five dimensional response graphs, by which optimal experimental conditions were selected. The results showed that all response variables were greatly dependent on three independent variables, and the optimal conditions were Span80 concentration 1.5%, poly(lactic-co-glycolic acid) concentration 17.5%, and theoretical drug content 6%. According to the optimal conditions, the drug content, encapsulation efficiency, mean diameter, diameter span and F1d of prepared microspheres were 4.37%, 72.8%, 64.1 microm, 1.36 and 8.93%, respectively.     

The use of samarium or sodium iodide salts as an alternative for the aza-Henry reaction

A novel reaction of bromonitromethane with a variety of imines in very mild conditions promoted by SmI₂ and NaI to afford nitroamines or bromonitroamines is described. When these reactions were performed on sugar-based imines, the corresponding nitroamines or bromonitroamines were obtained in high yields and from moderate to good stereoselectivities. Synthetic possibilities of nitroamines were also shown by their reduction with SmI₂/H₂O in the presence of pyrrolidine at room temperature. A mechanism is proposed for this novel aza-Henry reaction.     

Optimization of calculations for the preparation of standard solutions

The calculations necessary in the preparation of a large number of solutions used as standards, are time-consuming and tedious. The scheme proposed significantly shortens the time and makes the work more routine. The equations used are derived from wellknown stoichiometric expressions and mathematical representations of some necessary restrictions. The scheme has advantages when many solutions must be prepared for any analytical method.     

Optimization of aptamer microarray technology for multiple protein targets

Aptamer-based microarrays for the quantitation of multiple protein analytes have been developed. A multiplex aptamer microarray was generated by printing two RNA aptamers (anti-lysozyme and anti-ricin) and two DNA aptamers (anti-IgE and anti-thrombin) on to either streptavidin (SA) or neutravidin (NA)-coated glass slides. However, substantial optimization was required in order to ensure the simultaneous function of the aptamer:analyte pairs. The effects of protein labeling, assay buffer, surface coating, and immobilization chemistry and orientation were investigated. A single buffer (PBS buffer containing 5 mM MgCl₂ and 0.1% Tween 20) was found to work well with all the aptamers, even though this was not the buffer originally used in their selection, while neutravidin-coated slides yielded a lower detection limit, wider detection range, and more uniform background than streptavidin-coated slides. Incubation with Cy3-labeled proteins yielded sensitive, target-specific, and dose-dependent responses to each protein. Target protein concentrations as low as 72 pg/mL (5 pM, lysozyme), 15 ng/mL (0.5 nM, ricin), 1.9 ng/mL (0.01 nM, IgE), and 170 ng/mL (5 nM, thrombin) could be detected. These results show that aptamer arrays can potentially be used with numerous proteins in parallel, furthering the notion that aptamer arrays may be useful in proteomics.     

Facile deoxygenation of dicarbonyl compounds using a samarium diiodide-additive system

The reduction of alpha- and beta-dicarbonyl compounds was investigated with samarium diiodide in the presence of additive. Diketones and ketocarboxylic acids were easily reduced at room temperature to give the mono-alcohols in good to excellent yield, and ketoester afforded the saturated ester as the major product in moderate yield. These reductions containing the reductive deoxygenation can be rapidly performed under the facile and mild conditions by this method.     

Improved synthesis of key fragments for the preparation of natural product incednine

A shorter and more efficient synthesis of three key fragments that have been previously described for the preparation of the polyenic macrolactam aglycon of natural product incednine isolated from Actinomyces sp. has been developed. These fragments have been prepared with higher levels of selectivity when compared to the already published procedure.     

石墨烯应用于样品前处理的研究进展

样品前处理技术在样品分析中发挥着越来越重要的作用,而对分析物的富集能力和对样品基体的净化程度主要取决于高效的样品前处理材料,所以发展高性能的样品前处理材料一直是该领域的前沿研究方向。近年来,各类先进材料已经被引入样品前处理领域,发展了多种高性能的萃取材料。由于独特的物理化学性质,石墨烯已在各个研究领域获得广泛关注,在样品前处理领域也发挥着重要作用。基于高的比表面积、大的π电子结构、优异的吸附性能、丰富的官能团和易于化学改性等优点,石墨烯和氧化石墨烯基萃取材料被成功应用于各种样品的前处理,对不同领域中多种类型分析物表现出优异的萃取性能。该论文总结和讨论了近3年来石墨烯材料(石墨烯、氧化石墨烯及其功能化材料)在柱固相萃取、分散固相萃取、磁性固相萃取、搅拌棒萃取、纤维固相微萃取和管内固相微萃取等方面的研究进展。基于多种萃取机理如π-π、静电、疏水、亲水、氢键等相互作用,石墨烯萃取材料能够高效萃取和选择性富集不同类别的目标分析物,如重金属离子、多环芳烃、塑化剂、雌激素、药物分子、农药残留、兽药残留等。基于新型石墨烯萃取材料的各种样品前处理技术与多种检测技术如色谱、质谱、原子吸收光谱等联用,广泛应用于环境监测、食品安全和生化分析等领域。最后,总结了石墨烯在样品前处理领域中存在的问题,并展望了未来的发展趋势。     

Optimization of protein sample preparation for two-dimensional electrophoresis

Optimized 2DE sample preparation protocols that maximize total protein recovery are fundamental to improving proteome capture and increasing the utility of 2DE, which is in part limited by inadequate recovery of proteins with diverse physicochemical properties. Maintaining protein solubility is an important factor for protein recovery, but the multitude of solubility-enhancing agents and the relatively low-throughput nature of 2DE limit the systematic study of sample preparation. In this work, design of experiment (DOE) approaches are used to optimize protein recovery by altering the levels of four solubility-enhancing agents (urea, DTT, CHAPS, and SDS) in the initial suspension solution. Protein recovery is quantified by a total protein concentration assay, which is demonstrated to be representative of SDS-PAGE and 2DE recovery. DOE methodologies are presented as relatively high-throughput procedures for optimizing 2DE sample preparation parameters for a variety of sample types. Optimal suspension solution compositions are shown to vary across a model protein solution (no urea or DTT), Chinese hamster ovary (CHO) cell lysate (8 M urea, ≥2% CHAPS, ≥32.5 mM DTT), and Escherichia coli cell lysate (8 M urea, 4% CHAPS, 65 mM DTT), with optimized conditions increasing 2DE protein recovery at least 50% compared to suboptimal conditions.